1 /****************************************************************************** 2 * 3 * Module Name: exconvrt - Object conversion routines 4 * 5 *****************************************************************************/ 6 7 /* 8 * Copyright (C) 2000 - 2015, Intel Corp. 9 * All rights reserved. 10 * 11 * Redistribution and use in source and binary forms, with or without 12 * modification, are permitted provided that the following conditions 13 * are met: 14 * 1. Redistributions of source code must retain the above copyright 15 * notice, this list of conditions, and the following disclaimer, 16 * without modification. 17 * 2. Redistributions in binary form must reproduce at minimum a disclaimer 18 * substantially similar to the "NO WARRANTY" disclaimer below 19 * ("Disclaimer") and any redistribution must be conditioned upon 20 * including a substantially similar Disclaimer requirement for further 21 * binary redistribution. 22 * 3. Neither the names of the above-listed copyright holders nor the names 23 * of any contributors may be used to endorse or promote products derived 24 * from this software without specific prior written permission. 25 * 26 * Alternatively, this software may be distributed under the terms of the 27 * GNU General Public License ("GPL") version 2 as published by the Free 28 * Software Foundation. 29 * 30 * NO WARRANTY 31 * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS 32 * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT 33 * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTIBILITY AND FITNESS FOR 34 * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT 35 * HOLDERS OR CONTRIBUTORS BE LIABLE FOR SPECIAL, EXEMPLARY, OR CONSEQUENTIAL 36 * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS 37 * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) 38 * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, 39 * STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING 40 * IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE 41 * POSSIBILITY OF SUCH DAMAGES. 42 */ 43 44 #include <acpi/acpi.h> 45 #include "accommon.h" 46 #include "acinterp.h" 47 #include "amlcode.h" 48 49 #define _COMPONENT ACPI_EXECUTER 50 ACPI_MODULE_NAME("exconvrt") 51 52 /* Local prototypes */ 53 static u32 54 acpi_ex_convert_to_ascii(u64 integer, u16 base, u8 *string, u8 max_length); 55 56 /******************************************************************************* 57 * 58 * FUNCTION: acpi_ex_convert_to_integer 59 * 60 * PARAMETERS: obj_desc - Object to be converted. Must be an 61 * Integer, Buffer, or String 62 * result_desc - Where the new Integer object is returned 63 * flags - Used for string conversion 64 * 65 * RETURN: Status 66 * 67 * DESCRIPTION: Convert an ACPI Object to an integer. 68 * 69 ******************************************************************************/ 70 71 acpi_status 72 acpi_ex_convert_to_integer(union acpi_operand_object *obj_desc, 73 union acpi_operand_object **result_desc, u32 flags) 74 { 75 union acpi_operand_object *return_desc; 76 u8 *pointer; 77 u64 result; 78 u32 i; 79 u32 count; 80 acpi_status status; 81 82 ACPI_FUNCTION_TRACE_PTR(ex_convert_to_integer, obj_desc); 83 84 switch (obj_desc->common.type) { 85 case ACPI_TYPE_INTEGER: 86 87 /* No conversion necessary */ 88 89 *result_desc = obj_desc; 90 return_ACPI_STATUS(AE_OK); 91 92 case ACPI_TYPE_BUFFER: 93 case ACPI_TYPE_STRING: 94 95 /* Note: Takes advantage of common buffer/string fields */ 96 97 pointer = obj_desc->buffer.pointer; 98 count = obj_desc->buffer.length; 99 break; 100 101 default: 102 103 return_ACPI_STATUS(AE_TYPE); 104 } 105 106 /* 107 * Convert the buffer/string to an integer. Note that both buffers and 108 * strings are treated as raw data - we don't convert ascii to hex for 109 * strings. 110 * 111 * There are two terminating conditions for the loop: 112 * 1) The size of an integer has been reached, or 113 * 2) The end of the buffer or string has been reached 114 */ 115 result = 0; 116 117 /* String conversion is different than Buffer conversion */ 118 119 switch (obj_desc->common.type) { 120 case ACPI_TYPE_STRING: 121 /* 122 * Convert string to an integer - for most cases, the string must be 123 * hexadecimal as per the ACPI specification. The only exception (as 124 * of ACPI 3.0) is that the to_integer() operator allows both decimal 125 * and hexadecimal strings (hex prefixed with "0x"). 126 */ 127 status = acpi_ut_strtoul64((char *)pointer, flags, &result); 128 if (ACPI_FAILURE(status)) { 129 return_ACPI_STATUS(status); 130 } 131 break; 132 133 case ACPI_TYPE_BUFFER: 134 135 /* Check for zero-length buffer */ 136 137 if (!count) { 138 return_ACPI_STATUS(AE_AML_BUFFER_LIMIT); 139 } 140 141 /* Transfer no more than an integer's worth of data */ 142 143 if (count > acpi_gbl_integer_byte_width) { 144 count = acpi_gbl_integer_byte_width; 145 } 146 147 /* 148 * Convert buffer to an integer - we simply grab enough raw data 149 * from the buffer to fill an integer 150 */ 151 for (i = 0; i < count; i++) { 152 /* 153 * Get next byte and shift it into the Result. 154 * Little endian is used, meaning that the first byte of the buffer 155 * is the LSB of the integer 156 */ 157 result |= (((u64) pointer[i]) << (i * 8)); 158 } 159 break; 160 161 default: 162 163 /* No other types can get here */ 164 165 break; 166 } 167 168 /* Create a new integer */ 169 170 return_desc = acpi_ut_create_integer_object(result); 171 if (!return_desc) { 172 return_ACPI_STATUS(AE_NO_MEMORY); 173 } 174 175 ACPI_DEBUG_PRINT((ACPI_DB_EXEC, "Converted value: %8.8X%8.8X\n", 176 ACPI_FORMAT_UINT64(result))); 177 178 /* Save the Result */ 179 180 (void)acpi_ex_truncate_for32bit_table(return_desc); 181 *result_desc = return_desc; 182 return_ACPI_STATUS(AE_OK); 183 } 184 185 /******************************************************************************* 186 * 187 * FUNCTION: acpi_ex_convert_to_buffer 188 * 189 * PARAMETERS: obj_desc - Object to be converted. Must be an 190 * Integer, Buffer, or String 191 * result_desc - Where the new buffer object is returned 192 * 193 * RETURN: Status 194 * 195 * DESCRIPTION: Convert an ACPI Object to a Buffer 196 * 197 ******************************************************************************/ 198 199 acpi_status 200 acpi_ex_convert_to_buffer(union acpi_operand_object *obj_desc, 201 union acpi_operand_object **result_desc) 202 { 203 union acpi_operand_object *return_desc; 204 u8 *new_buf; 205 206 ACPI_FUNCTION_TRACE_PTR(ex_convert_to_buffer, obj_desc); 207 208 switch (obj_desc->common.type) { 209 case ACPI_TYPE_BUFFER: 210 211 /* No conversion necessary */ 212 213 *result_desc = obj_desc; 214 return_ACPI_STATUS(AE_OK); 215 216 case ACPI_TYPE_INTEGER: 217 /* 218 * Create a new Buffer object. 219 * Need enough space for one integer 220 */ 221 return_desc = 222 acpi_ut_create_buffer_object(acpi_gbl_integer_byte_width); 223 if (!return_desc) { 224 return_ACPI_STATUS(AE_NO_MEMORY); 225 } 226 227 /* Copy the integer to the buffer, LSB first */ 228 229 new_buf = return_desc->buffer.pointer; 230 memcpy(new_buf, 231 &obj_desc->integer.value, acpi_gbl_integer_byte_width); 232 break; 233 234 case ACPI_TYPE_STRING: 235 /* 236 * Create a new Buffer object 237 * Size will be the string length 238 * 239 * NOTE: Add one to the string length to include the null terminator. 240 * The ACPI spec is unclear on this subject, but there is existing 241 * ASL/AML code that depends on the null being transferred to the new 242 * buffer. 243 */ 244 return_desc = acpi_ut_create_buffer_object((acpi_size) 245 obj_desc->string. 246 length + 1); 247 if (!return_desc) { 248 return_ACPI_STATUS(AE_NO_MEMORY); 249 } 250 251 /* Copy the string to the buffer */ 252 253 new_buf = return_desc->buffer.pointer; 254 strncpy((char *)new_buf, (char *)obj_desc->string.pointer, 255 obj_desc->string.length); 256 break; 257 258 default: 259 260 return_ACPI_STATUS(AE_TYPE); 261 } 262 263 /* Mark buffer initialized */ 264 265 return_desc->common.flags |= AOPOBJ_DATA_VALID; 266 *result_desc = return_desc; 267 return_ACPI_STATUS(AE_OK); 268 } 269 270 /******************************************************************************* 271 * 272 * FUNCTION: acpi_ex_convert_to_ascii 273 * 274 * PARAMETERS: integer - Value to be converted 275 * base - ACPI_STRING_DECIMAL or ACPI_STRING_HEX 276 * string - Where the string is returned 277 * data_width - Size of data item to be converted, in bytes 278 * 279 * RETURN: Actual string length 280 * 281 * DESCRIPTION: Convert an ACPI Integer to a hex or decimal string 282 * 283 ******************************************************************************/ 284 285 static u32 286 acpi_ex_convert_to_ascii(u64 integer, u16 base, u8 *string, u8 data_width) 287 { 288 u64 digit; 289 u32 i; 290 u32 j; 291 u32 k = 0; 292 u32 hex_length; 293 u32 decimal_length; 294 u32 remainder; 295 u8 supress_zeros; 296 297 ACPI_FUNCTION_ENTRY(); 298 299 switch (base) { 300 case 10: 301 302 /* Setup max length for the decimal number */ 303 304 switch (data_width) { 305 case 1: 306 307 decimal_length = ACPI_MAX8_DECIMAL_DIGITS; 308 break; 309 310 case 4: 311 312 decimal_length = ACPI_MAX32_DECIMAL_DIGITS; 313 break; 314 315 case 8: 316 default: 317 318 decimal_length = ACPI_MAX64_DECIMAL_DIGITS; 319 break; 320 } 321 322 supress_zeros = TRUE; /* No leading zeros */ 323 remainder = 0; 324 325 for (i = decimal_length; i > 0; i--) { 326 327 /* Divide by nth factor of 10 */ 328 329 digit = integer; 330 for (j = 0; j < i; j++) { 331 (void)acpi_ut_short_divide(digit, 10, &digit, 332 &remainder); 333 } 334 335 /* Handle leading zeros */ 336 337 if (remainder != 0) { 338 supress_zeros = FALSE; 339 } 340 341 if (!supress_zeros) { 342 string[k] = (u8) (ACPI_ASCII_ZERO + remainder); 343 k++; 344 } 345 } 346 break; 347 348 case 16: 349 350 /* hex_length: 2 ascii hex chars per data byte */ 351 352 hex_length = ACPI_MUL_2(data_width); 353 for (i = 0, j = (hex_length - 1); i < hex_length; i++, j--) { 354 355 /* Get one hex digit, most significant digits first */ 356 357 string[k] = 358 (u8) acpi_ut_hex_to_ascii_char(integer, 359 ACPI_MUL_4(j)); 360 k++; 361 } 362 break; 363 364 default: 365 return (0); 366 } 367 368 /* 369 * Since leading zeros are suppressed, we must check for the case where 370 * the integer equals 0 371 * 372 * Finally, null terminate the string and return the length 373 */ 374 if (!k) { 375 string[0] = ACPI_ASCII_ZERO; 376 k = 1; 377 } 378 379 string[k] = 0; 380 return ((u32) k); 381 } 382 383 /******************************************************************************* 384 * 385 * FUNCTION: acpi_ex_convert_to_string 386 * 387 * PARAMETERS: obj_desc - Object to be converted. Must be an 388 * Integer, Buffer, or String 389 * result_desc - Where the string object is returned 390 * type - String flags (base and conversion type) 391 * 392 * RETURN: Status 393 * 394 * DESCRIPTION: Convert an ACPI Object to a string 395 * 396 ******************************************************************************/ 397 398 acpi_status 399 acpi_ex_convert_to_string(union acpi_operand_object * obj_desc, 400 union acpi_operand_object ** result_desc, u32 type) 401 { 402 union acpi_operand_object *return_desc; 403 u8 *new_buf; 404 u32 i; 405 u32 string_length = 0; 406 u16 base = 16; 407 u8 separator = ','; 408 409 ACPI_FUNCTION_TRACE_PTR(ex_convert_to_string, obj_desc); 410 411 switch (obj_desc->common.type) { 412 case ACPI_TYPE_STRING: 413 414 /* No conversion necessary */ 415 416 *result_desc = obj_desc; 417 return_ACPI_STATUS(AE_OK); 418 419 case ACPI_TYPE_INTEGER: 420 421 switch (type) { 422 case ACPI_EXPLICIT_CONVERT_DECIMAL: 423 424 /* Make room for maximum decimal number */ 425 426 string_length = ACPI_MAX_DECIMAL_DIGITS; 427 base = 10; 428 break; 429 430 default: 431 432 /* Two hex string characters for each integer byte */ 433 434 string_length = ACPI_MUL_2(acpi_gbl_integer_byte_width); 435 break; 436 } 437 438 /* 439 * Create a new String 440 * Need enough space for one ASCII integer (plus null terminator) 441 */ 442 return_desc = 443 acpi_ut_create_string_object((acpi_size) string_length); 444 if (!return_desc) { 445 return_ACPI_STATUS(AE_NO_MEMORY); 446 } 447 448 new_buf = return_desc->buffer.pointer; 449 450 /* Convert integer to string */ 451 452 string_length = 453 acpi_ex_convert_to_ascii(obj_desc->integer.value, base, 454 new_buf, 455 acpi_gbl_integer_byte_width); 456 457 /* Null terminate at the correct place */ 458 459 return_desc->string.length = string_length; 460 new_buf[string_length] = 0; 461 break; 462 463 case ACPI_TYPE_BUFFER: 464 465 /* Setup string length, base, and separator */ 466 467 switch (type) { 468 case ACPI_EXPLICIT_CONVERT_DECIMAL: /* Used by to_decimal_string */ 469 /* 470 * From ACPI: "If Data is a buffer, it is converted to a string of 471 * decimal values separated by commas." 472 */ 473 base = 10; 474 475 /* 476 * Calculate the final string length. Individual string values 477 * are variable length (include separator for each) 478 */ 479 for (i = 0; i < obj_desc->buffer.length; i++) { 480 if (obj_desc->buffer.pointer[i] >= 100) { 481 string_length += 4; 482 } else if (obj_desc->buffer.pointer[i] >= 10) { 483 string_length += 3; 484 } else { 485 string_length += 2; 486 } 487 } 488 break; 489 490 case ACPI_IMPLICIT_CONVERT_HEX: 491 /* 492 * From the ACPI spec: 493 *"The entire contents of the buffer are converted to a string of 494 * two-character hexadecimal numbers, each separated by a space." 495 */ 496 separator = ' '; 497 string_length = (obj_desc->buffer.length * 3); 498 break; 499 500 case ACPI_EXPLICIT_CONVERT_HEX: /* Used by to_hex_string */ 501 /* 502 * From ACPI: "If Data is a buffer, it is converted to a string of 503 * hexadecimal values separated by commas." 504 */ 505 string_length = (obj_desc->buffer.length * 3); 506 break; 507 508 default: 509 return_ACPI_STATUS(AE_BAD_PARAMETER); 510 } 511 512 /* 513 * Create a new string object and string buffer 514 * (-1 because of extra separator included in string_length from above) 515 * Allow creation of zero-length strings from zero-length buffers. 516 */ 517 if (string_length) { 518 string_length--; 519 } 520 521 return_desc = 522 acpi_ut_create_string_object((acpi_size) string_length); 523 if (!return_desc) { 524 return_ACPI_STATUS(AE_NO_MEMORY); 525 } 526 527 new_buf = return_desc->buffer.pointer; 528 529 /* 530 * Convert buffer bytes to hex or decimal values 531 * (separated by commas or spaces) 532 */ 533 for (i = 0; i < obj_desc->buffer.length; i++) { 534 new_buf += acpi_ex_convert_to_ascii((u64) obj_desc-> 535 buffer.pointer[i], 536 base, new_buf, 1); 537 *new_buf++ = separator; /* each separated by a comma or space */ 538 } 539 540 /* 541 * Null terminate the string 542 * (overwrites final comma/space from above) 543 */ 544 if (obj_desc->buffer.length) { 545 new_buf--; 546 } 547 *new_buf = 0; 548 break; 549 550 default: 551 552 return_ACPI_STATUS(AE_TYPE); 553 } 554 555 *result_desc = return_desc; 556 return_ACPI_STATUS(AE_OK); 557 } 558 559 /******************************************************************************* 560 * 561 * FUNCTION: acpi_ex_convert_to_target_type 562 * 563 * PARAMETERS: destination_type - Current type of the destination 564 * source_desc - Source object to be converted. 565 * result_desc - Where the converted object is returned 566 * walk_state - Current method state 567 * 568 * RETURN: Status 569 * 570 * DESCRIPTION: Implements "implicit conversion" rules for storing an object. 571 * 572 ******************************************************************************/ 573 574 acpi_status 575 acpi_ex_convert_to_target_type(acpi_object_type destination_type, 576 union acpi_operand_object *source_desc, 577 union acpi_operand_object **result_desc, 578 struct acpi_walk_state *walk_state) 579 { 580 acpi_status status = AE_OK; 581 582 ACPI_FUNCTION_TRACE(ex_convert_to_target_type); 583 584 /* Default behavior */ 585 586 *result_desc = source_desc; 587 588 /* 589 * If required by the target, 590 * perform implicit conversion on the source before we store it. 591 */ 592 switch (GET_CURRENT_ARG_TYPE(walk_state->op_info->runtime_args)) { 593 case ARGI_SIMPLE_TARGET: 594 case ARGI_FIXED_TARGET: 595 case ARGI_INTEGER_REF: /* Handles Increment, Decrement cases */ 596 597 switch (destination_type) { 598 case ACPI_TYPE_LOCAL_REGION_FIELD: 599 /* 600 * Named field can always handle conversions 601 */ 602 break; 603 604 default: 605 606 /* No conversion allowed for these types */ 607 608 if (destination_type != source_desc->common.type) { 609 ACPI_DEBUG_PRINT((ACPI_DB_INFO, 610 "Explicit operator, will store (%s) over existing type (%s)\n", 611 acpi_ut_get_object_type_name 612 (source_desc), 613 acpi_ut_get_type_name 614 (destination_type))); 615 status = AE_TYPE; 616 } 617 } 618 break; 619 620 case ARGI_TARGETREF: 621 case ARGI_STORE_TARGET: 622 623 switch (destination_type) { 624 case ACPI_TYPE_INTEGER: 625 case ACPI_TYPE_BUFFER_FIELD: 626 case ACPI_TYPE_LOCAL_BANK_FIELD: 627 case ACPI_TYPE_LOCAL_INDEX_FIELD: 628 /* 629 * These types require an Integer operand. We can convert 630 * a Buffer or a String to an Integer if necessary. 631 */ 632 status = 633 acpi_ex_convert_to_integer(source_desc, result_desc, 634 16); 635 break; 636 637 case ACPI_TYPE_STRING: 638 /* 639 * The operand must be a String. We can convert an 640 * Integer or Buffer if necessary 641 */ 642 status = 643 acpi_ex_convert_to_string(source_desc, result_desc, 644 ACPI_IMPLICIT_CONVERT_HEX); 645 break; 646 647 case ACPI_TYPE_BUFFER: 648 /* 649 * The operand must be a Buffer. We can convert an 650 * Integer or String if necessary 651 */ 652 status = 653 acpi_ex_convert_to_buffer(source_desc, result_desc); 654 break; 655 656 default: 657 658 ACPI_ERROR((AE_INFO, 659 "Bad destination type during conversion: 0x%X", 660 destination_type)); 661 status = AE_AML_INTERNAL; 662 break; 663 } 664 break; 665 666 case ARGI_REFERENCE: 667 /* 668 * create_xxxx_field cases - we are storing the field object into the name 669 */ 670 break; 671 672 default: 673 674 ACPI_ERROR((AE_INFO, 675 "Unknown Target type ID 0x%X AmlOpcode 0x%X DestType %s", 676 GET_CURRENT_ARG_TYPE(walk_state->op_info-> 677 runtime_args), 678 walk_state->opcode, 679 acpi_ut_get_type_name(destination_type))); 680 status = AE_AML_INTERNAL; 681 } 682 683 /* 684 * Source-to-Target conversion semantics: 685 * 686 * If conversion to the target type cannot be performed, then simply 687 * overwrite the target with the new object and type. 688 */ 689 if (status == AE_TYPE) { 690 status = AE_OK; 691 } 692 693 return_ACPI_STATUS(status); 694 } 695