1 /****************************************************************************** 2 * 3 * Module Name: evxfregn - External Interfaces, ACPI Operation Regions and 4 * Address Spaces. 5 * 6 *****************************************************************************/ 7 8 /* 9 * Copyright (C) 2000 - 2013, Intel Corp. 10 * All rights reserved. 11 * 12 * Redistribution and use in source and binary forms, with or without 13 * modification, are permitted provided that the following conditions 14 * are met: 15 * 1. Redistributions of source code must retain the above copyright 16 * notice, this list of conditions, and the following disclaimer, 17 * without modification. 18 * 2. Redistributions in binary form must reproduce at minimum a disclaimer 19 * substantially similar to the "NO WARRANTY" disclaimer below 20 * ("Disclaimer") and any redistribution must be conditioned upon 21 * including a substantially similar Disclaimer requirement for further 22 * binary redistribution. 23 * 3. Neither the names of the above-listed copyright holders nor the names 24 * of any contributors may be used to endorse or promote products derived 25 * from this software without specific prior written permission. 26 * 27 * Alternatively, this software may be distributed under the terms of the 28 * GNU General Public License ("GPL") version 2 as published by the Free 29 * Software Foundation. 30 * 31 * NO WARRANTY 32 * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS 33 * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT 34 * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTIBILITY AND FITNESS FOR 35 * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT 36 * HOLDERS OR CONTRIBUTORS BE LIABLE FOR SPECIAL, EXEMPLARY, OR CONSEQUENTIAL 37 * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS 38 * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) 39 * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, 40 * STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING 41 * IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE 42 * POSSIBILITY OF SUCH DAMAGES. 43 */ 44 45 #define EXPORT_ACPI_INTERFACES 46 47 #include <acpi/acpi.h> 48 #include "accommon.h" 49 #include "acnamesp.h" 50 #include "acevents.h" 51 52 #define _COMPONENT ACPI_EVENTS 53 ACPI_MODULE_NAME("evxfregn") 54 55 /******************************************************************************* 56 * 57 * FUNCTION: acpi_install_address_space_handler 58 * 59 * PARAMETERS: device - Handle for the device 60 * space_id - The address space ID 61 * handler - Address of the handler 62 * setup - Address of the setup function 63 * context - Value passed to the handler on each access 64 * 65 * RETURN: Status 66 * 67 * DESCRIPTION: Install a handler for all op_regions of a given space_id. 68 * 69 * NOTE: This function should only be called after acpi_enable_subsystem has 70 * been called. This is because any _REG methods associated with the Space ID 71 * are executed here, and these methods can only be safely executed after 72 * the default handlers have been installed and the hardware has been 73 * initialized (via acpi_enable_subsystem.) 74 * 75 ******************************************************************************/ 76 acpi_status 77 acpi_install_address_space_handler(acpi_handle device, 78 acpi_adr_space_type space_id, 79 acpi_adr_space_handler handler, 80 acpi_adr_space_setup setup, void *context) 81 { 82 struct acpi_namespace_node *node; 83 acpi_status status; 84 85 ACPI_FUNCTION_TRACE(acpi_install_address_space_handler); 86 87 /* Parameter validation */ 88 89 if (!device) { 90 return_ACPI_STATUS(AE_BAD_PARAMETER); 91 } 92 93 status = acpi_ut_acquire_mutex(ACPI_MTX_NAMESPACE); 94 if (ACPI_FAILURE(status)) { 95 return_ACPI_STATUS(status); 96 } 97 98 /* Convert and validate the device handle */ 99 100 node = acpi_ns_validate_handle(device); 101 if (!node) { 102 status = AE_BAD_PARAMETER; 103 goto unlock_and_exit; 104 } 105 106 /* Install the handler for all Regions for this Space ID */ 107 108 status = 109 acpi_ev_install_space_handler(node, space_id, handler, setup, 110 context); 111 if (ACPI_FAILURE(status)) { 112 goto unlock_and_exit; 113 } 114 115 /* 116 * For the default space_IDs, (the IDs for which there are default region handlers 117 * installed) Only execute the _REG methods if the global initialization _REG 118 * methods have already been run (via acpi_initialize_objects). In other words, 119 * we will defer the execution of the _REG methods for these space_IDs until 120 * execution of acpi_initialize_objects. This is done because we need the handlers 121 * for the default spaces (mem/io/pci/table) to be installed before we can run 122 * any control methods (or _REG methods). There is known BIOS code that depends 123 * on this. 124 * 125 * For all other space_IDs, we can safely execute the _REG methods immediately. 126 * This means that for IDs like embedded_controller, this function should be called 127 * only after acpi_enable_subsystem has been called. 128 */ 129 switch (space_id) { 130 case ACPI_ADR_SPACE_SYSTEM_MEMORY: 131 case ACPI_ADR_SPACE_SYSTEM_IO: 132 case ACPI_ADR_SPACE_PCI_CONFIG: 133 case ACPI_ADR_SPACE_DATA_TABLE: 134 135 if (!acpi_gbl_reg_methods_executed) { 136 137 /* We will defer execution of the _REG methods for this space */ 138 goto unlock_and_exit; 139 } 140 break; 141 142 default: 143 144 break; 145 } 146 147 /* Run all _REG methods for this address space */ 148 149 status = acpi_ev_execute_reg_methods(node, space_id); 150 151 unlock_and_exit: 152 (void)acpi_ut_release_mutex(ACPI_MTX_NAMESPACE); 153 return_ACPI_STATUS(status); 154 } 155 156 ACPI_EXPORT_SYMBOL(acpi_install_address_space_handler) 157 158 /******************************************************************************* 159 * 160 * FUNCTION: acpi_remove_address_space_handler 161 * 162 * PARAMETERS: device - Handle for the device 163 * space_id - The address space ID 164 * handler - Address of the handler 165 * 166 * RETURN: Status 167 * 168 * DESCRIPTION: Remove a previously installed handler. 169 * 170 ******************************************************************************/ 171 acpi_status 172 acpi_remove_address_space_handler(acpi_handle device, 173 acpi_adr_space_type space_id, 174 acpi_adr_space_handler handler) 175 { 176 union acpi_operand_object *obj_desc; 177 union acpi_operand_object *handler_obj; 178 union acpi_operand_object *region_obj; 179 union acpi_operand_object **last_obj_ptr; 180 struct acpi_namespace_node *node; 181 acpi_status status; 182 183 ACPI_FUNCTION_TRACE(acpi_remove_address_space_handler); 184 185 /* Parameter validation */ 186 187 if (!device) { 188 return_ACPI_STATUS(AE_BAD_PARAMETER); 189 } 190 191 status = acpi_ut_acquire_mutex(ACPI_MTX_NAMESPACE); 192 if (ACPI_FAILURE(status)) { 193 return_ACPI_STATUS(status); 194 } 195 196 /* Convert and validate the device handle */ 197 198 node = acpi_ns_validate_handle(device); 199 if (!node || 200 ((node->type != ACPI_TYPE_DEVICE) && 201 (node->type != ACPI_TYPE_PROCESSOR) && 202 (node->type != ACPI_TYPE_THERMAL) && 203 (node != acpi_gbl_root_node))) { 204 status = AE_BAD_PARAMETER; 205 goto unlock_and_exit; 206 } 207 208 /* Make sure the internal object exists */ 209 210 obj_desc = acpi_ns_get_attached_object(node); 211 if (!obj_desc) { 212 status = AE_NOT_EXIST; 213 goto unlock_and_exit; 214 } 215 216 /* Find the address handler the user requested */ 217 218 handler_obj = obj_desc->device.handler; 219 last_obj_ptr = &obj_desc->device.handler; 220 while (handler_obj) { 221 222 /* We have a handler, see if user requested this one */ 223 224 if (handler_obj->address_space.space_id == space_id) { 225 226 /* Handler must be the same as the installed handler */ 227 228 if (handler_obj->address_space.handler != handler) { 229 status = AE_BAD_PARAMETER; 230 goto unlock_and_exit; 231 } 232 233 /* Matched space_id, first dereference this in the Regions */ 234 235 ACPI_DEBUG_PRINT((ACPI_DB_OPREGION, 236 "Removing address handler %p(%p) for region %s " 237 "on Device %p(%p)\n", 238 handler_obj, handler, 239 acpi_ut_get_region_name(space_id), 240 node, obj_desc)); 241 242 region_obj = handler_obj->address_space.region_list; 243 244 /* Walk the handler's region list */ 245 246 while (region_obj) { 247 /* 248 * First disassociate the handler from the region. 249 * 250 * NOTE: this doesn't mean that the region goes away 251 * The region is just inaccessible as indicated to 252 * the _REG method 253 */ 254 acpi_ev_detach_region(region_obj, TRUE); 255 256 /* 257 * Walk the list: Just grab the head because the 258 * detach_region removed the previous head. 259 */ 260 region_obj = 261 handler_obj->address_space.region_list; 262 263 } 264 265 /* Remove this Handler object from the list */ 266 267 *last_obj_ptr = handler_obj->address_space.next; 268 269 /* Now we can delete the handler object */ 270 271 acpi_ut_remove_reference(handler_obj); 272 goto unlock_and_exit; 273 } 274 275 /* Walk the linked list of handlers */ 276 277 last_obj_ptr = &handler_obj->address_space.next; 278 handler_obj = handler_obj->address_space.next; 279 } 280 281 /* The handler does not exist */ 282 283 ACPI_DEBUG_PRINT((ACPI_DB_OPREGION, 284 "Unable to remove address handler %p for %s(%X), DevNode %p, obj %p\n", 285 handler, acpi_ut_get_region_name(space_id), space_id, 286 node, obj_desc)); 287 288 status = AE_NOT_EXIST; 289 290 unlock_and_exit: 291 (void)acpi_ut_release_mutex(ACPI_MTX_NAMESPACE); 292 return_ACPI_STATUS(status); 293 } 294 295 ACPI_EXPORT_SYMBOL(acpi_remove_address_space_handler) 296