1 /****************************************************************************** 2 * 3 * Module Name: evhandler - Support for Address Space handlers 4 * 5 *****************************************************************************/ 6 7 /* 8 * Copyright (C) 2000 - 2015, Intel Corp. 9 * All rights reserved. 10 * 11 * Redistribution and use in source and binary forms, with or without 12 * modification, are permitted provided that the following conditions 13 * are met: 14 * 1. Redistributions of source code must retain the above copyright 15 * notice, this list of conditions, and the following disclaimer, 16 * without modification. 17 * 2. Redistributions in binary form must reproduce at minimum a disclaimer 18 * substantially similar to the "NO WARRANTY" disclaimer below 19 * ("Disclaimer") and any redistribution must be conditioned upon 20 * including a substantially similar Disclaimer requirement for further 21 * binary redistribution. 22 * 3. Neither the names of the above-listed copyright holders nor the names 23 * of any contributors may be used to endorse or promote products derived 24 * from this software without specific prior written permission. 25 * 26 * Alternatively, this software may be distributed under the terms of the 27 * GNU General Public License ("GPL") version 2 as published by the Free 28 * Software Foundation. 29 * 30 * NO WARRANTY 31 * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS 32 * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT 33 * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTIBILITY AND FITNESS FOR 34 * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT 35 * HOLDERS OR CONTRIBUTORS BE LIABLE FOR SPECIAL, EXEMPLARY, OR CONSEQUENTIAL 36 * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS 37 * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) 38 * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, 39 * STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING 40 * IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE 41 * POSSIBILITY OF SUCH DAMAGES. 42 */ 43 44 #include <acpi/acpi.h> 45 #include "accommon.h" 46 #include "acevents.h" 47 #include "acnamesp.h" 48 #include "acinterp.h" 49 50 #define _COMPONENT ACPI_EVENTS 51 ACPI_MODULE_NAME("evhandler") 52 53 /* Local prototypes */ 54 static acpi_status 55 acpi_ev_install_handler(acpi_handle obj_handle, 56 u32 level, void *context, void **return_value); 57 58 /* These are the address spaces that will get default handlers */ 59 60 u8 acpi_gbl_default_address_spaces[ACPI_NUM_DEFAULT_SPACES] = { 61 ACPI_ADR_SPACE_SYSTEM_MEMORY, 62 ACPI_ADR_SPACE_SYSTEM_IO, 63 ACPI_ADR_SPACE_PCI_CONFIG, 64 ACPI_ADR_SPACE_DATA_TABLE 65 }; 66 67 /******************************************************************************* 68 * 69 * FUNCTION: acpi_ev_install_region_handlers 70 * 71 * PARAMETERS: None 72 * 73 * RETURN: Status 74 * 75 * DESCRIPTION: Installs the core subsystem default address space handlers. 76 * 77 ******************************************************************************/ 78 79 acpi_status acpi_ev_install_region_handlers(void) 80 { 81 acpi_status status; 82 u32 i; 83 84 ACPI_FUNCTION_TRACE(ev_install_region_handlers); 85 86 status = acpi_ut_acquire_mutex(ACPI_MTX_NAMESPACE); 87 if (ACPI_FAILURE(status)) { 88 return_ACPI_STATUS(status); 89 } 90 91 /* 92 * All address spaces (PCI Config, EC, SMBus) are scope dependent and 93 * registration must occur for a specific device. 94 * 95 * In the case of the system memory and IO address spaces there is 96 * currently no device associated with the address space. For these we 97 * use the root. 98 * 99 * We install the default PCI config space handler at the root so that 100 * this space is immediately available even though the we have not 101 * enumerated all the PCI Root Buses yet. This is to conform to the ACPI 102 * specification which states that the PCI config space must be always 103 * available -- even though we are nowhere near ready to find the PCI root 104 * buses at this point. 105 * 106 * NOTE: We ignore AE_ALREADY_EXISTS because this means that a handler 107 * has already been installed (via acpi_install_address_space_handler). 108 * Similar for AE_SAME_HANDLER. 109 */ 110 for (i = 0; i < ACPI_NUM_DEFAULT_SPACES; i++) { 111 status = acpi_ev_install_space_handler(acpi_gbl_root_node, 112 acpi_gbl_default_address_spaces 113 [i], 114 ACPI_DEFAULT_HANDLER, 115 NULL, NULL); 116 switch (status) { 117 case AE_OK: 118 case AE_SAME_HANDLER: 119 case AE_ALREADY_EXISTS: 120 121 /* These exceptions are all OK */ 122 123 status = AE_OK; 124 break; 125 126 default: 127 128 goto unlock_and_exit; 129 } 130 } 131 132 unlock_and_exit: 133 (void)acpi_ut_release_mutex(ACPI_MTX_NAMESPACE); 134 return_ACPI_STATUS(status); 135 } 136 137 /******************************************************************************* 138 * 139 * FUNCTION: acpi_ev_has_default_handler 140 * 141 * PARAMETERS: node - Namespace node for the device 142 * space_id - The address space ID 143 * 144 * RETURN: TRUE if default handler is installed, FALSE otherwise 145 * 146 * DESCRIPTION: Check if the default handler is installed for the requested 147 * space ID. 148 * 149 ******************************************************************************/ 150 151 u8 152 acpi_ev_has_default_handler(struct acpi_namespace_node *node, 153 acpi_adr_space_type space_id) 154 { 155 union acpi_operand_object *obj_desc; 156 union acpi_operand_object *handler_obj; 157 158 /* Must have an existing internal object */ 159 160 obj_desc = acpi_ns_get_attached_object(node); 161 if (obj_desc) { 162 handler_obj = obj_desc->device.handler; 163 164 /* Walk the linked list of handlers for this object */ 165 166 while (handler_obj) { 167 if (handler_obj->address_space.space_id == space_id) { 168 if (handler_obj->address_space.handler_flags & 169 ACPI_ADDR_HANDLER_DEFAULT_INSTALLED) { 170 return (TRUE); 171 } 172 } 173 174 handler_obj = handler_obj->address_space.next; 175 } 176 } 177 178 return (FALSE); 179 } 180 181 /******************************************************************************* 182 * 183 * FUNCTION: acpi_ev_install_handler 184 * 185 * PARAMETERS: walk_namespace callback 186 * 187 * DESCRIPTION: This routine installs an address handler into objects that are 188 * of type Region or Device. 189 * 190 * If the Object is a Device, and the device has a handler of 191 * the same type then the search is terminated in that branch. 192 * 193 * This is because the existing handler is closer in proximity 194 * to any more regions than the one we are trying to install. 195 * 196 ******************************************************************************/ 197 198 static acpi_status 199 acpi_ev_install_handler(acpi_handle obj_handle, 200 u32 level, void *context, void **return_value) 201 { 202 union acpi_operand_object *handler_obj; 203 union acpi_operand_object *next_handler_obj; 204 union acpi_operand_object *obj_desc; 205 struct acpi_namespace_node *node; 206 acpi_status status; 207 208 ACPI_FUNCTION_NAME(ev_install_handler); 209 210 handler_obj = (union acpi_operand_object *)context; 211 212 /* Parameter validation */ 213 214 if (!handler_obj) { 215 return (AE_OK); 216 } 217 218 /* Convert and validate the device handle */ 219 220 node = acpi_ns_validate_handle(obj_handle); 221 if (!node) { 222 return (AE_BAD_PARAMETER); 223 } 224 225 /* 226 * We only care about regions and objects that are allowed to have 227 * address space handlers 228 */ 229 if ((node->type != ACPI_TYPE_DEVICE) && 230 (node->type != ACPI_TYPE_REGION) && (node != acpi_gbl_root_node)) { 231 return (AE_OK); 232 } 233 234 /* Check for an existing internal object */ 235 236 obj_desc = acpi_ns_get_attached_object(node); 237 if (!obj_desc) { 238 239 /* No object, just exit */ 240 241 return (AE_OK); 242 } 243 244 /* Devices are handled different than regions */ 245 246 if (obj_desc->common.type == ACPI_TYPE_DEVICE) { 247 248 /* Check if this Device already has a handler for this address space */ 249 250 next_handler_obj = obj_desc->device.handler; 251 while (next_handler_obj) { 252 253 /* Found a handler, is it for the same address space? */ 254 255 if (next_handler_obj->address_space.space_id == 256 handler_obj->address_space.space_id) { 257 ACPI_DEBUG_PRINT((ACPI_DB_OPREGION, 258 "Found handler for region [%s] in device %p(%p) " 259 "handler %p\n", 260 acpi_ut_get_region_name 261 (handler_obj->address_space. 262 space_id), obj_desc, 263 next_handler_obj, 264 handler_obj)); 265 266 /* 267 * Since the object we found it on was a device, then it 268 * means that someone has already installed a handler for 269 * the branch of the namespace from this device on. Just 270 * bail out telling the walk routine to not traverse this 271 * branch. This preserves the scoping rule for handlers. 272 */ 273 return (AE_CTRL_DEPTH); 274 } 275 276 /* Walk the linked list of handlers attached to this device */ 277 278 next_handler_obj = next_handler_obj->address_space.next; 279 } 280 281 /* 282 * As long as the device didn't have a handler for this space we 283 * don't care about it. We just ignore it and proceed. 284 */ 285 return (AE_OK); 286 } 287 288 /* Object is a Region */ 289 290 if (obj_desc->region.space_id != handler_obj->address_space.space_id) { 291 292 /* This region is for a different address space, just ignore it */ 293 294 return (AE_OK); 295 } 296 297 /* 298 * Now we have a region and it is for the handler's address space type. 299 * 300 * First disconnect region for any previous handler (if any) 301 */ 302 acpi_ev_detach_region(obj_desc, FALSE); 303 304 /* Connect the region to the new handler */ 305 306 status = acpi_ev_attach_region(handler_obj, obj_desc, FALSE); 307 return (status); 308 } 309 310 /******************************************************************************* 311 * 312 * FUNCTION: acpi_ev_install_space_handler 313 * 314 * PARAMETERS: node - Namespace node for the device 315 * space_id - The address space ID 316 * handler - Address of the handler 317 * setup - Address of the setup function 318 * context - Value passed to the handler on each access 319 * 320 * RETURN: Status 321 * 322 * DESCRIPTION: Install a handler for all op_regions of a given space_id. 323 * Assumes namespace is locked 324 * 325 ******************************************************************************/ 326 327 acpi_status 328 acpi_ev_install_space_handler(struct acpi_namespace_node * node, 329 acpi_adr_space_type space_id, 330 acpi_adr_space_handler handler, 331 acpi_adr_space_setup setup, void *context) 332 { 333 union acpi_operand_object *obj_desc; 334 union acpi_operand_object *handler_obj; 335 acpi_status status; 336 acpi_object_type type; 337 u8 flags = 0; 338 339 ACPI_FUNCTION_TRACE(ev_install_space_handler); 340 341 /* 342 * This registration is valid for only the types below and the root. This 343 * is where the default handlers get placed. 344 */ 345 if ((node->type != ACPI_TYPE_DEVICE) && 346 (node->type != ACPI_TYPE_PROCESSOR) && 347 (node->type != ACPI_TYPE_THERMAL) && (node != acpi_gbl_root_node)) { 348 status = AE_BAD_PARAMETER; 349 goto unlock_and_exit; 350 } 351 352 if (handler == ACPI_DEFAULT_HANDLER) { 353 flags = ACPI_ADDR_HANDLER_DEFAULT_INSTALLED; 354 355 switch (space_id) { 356 case ACPI_ADR_SPACE_SYSTEM_MEMORY: 357 358 handler = acpi_ex_system_memory_space_handler; 359 setup = acpi_ev_system_memory_region_setup; 360 break; 361 362 case ACPI_ADR_SPACE_SYSTEM_IO: 363 364 handler = acpi_ex_system_io_space_handler; 365 setup = acpi_ev_io_space_region_setup; 366 break; 367 368 case ACPI_ADR_SPACE_PCI_CONFIG: 369 370 handler = acpi_ex_pci_config_space_handler; 371 setup = acpi_ev_pci_config_region_setup; 372 break; 373 374 case ACPI_ADR_SPACE_CMOS: 375 376 handler = acpi_ex_cmos_space_handler; 377 setup = acpi_ev_cmos_region_setup; 378 break; 379 380 case ACPI_ADR_SPACE_PCI_BAR_TARGET: 381 382 handler = acpi_ex_pci_bar_space_handler; 383 setup = acpi_ev_pci_bar_region_setup; 384 break; 385 386 case ACPI_ADR_SPACE_DATA_TABLE: 387 388 handler = acpi_ex_data_table_space_handler; 389 setup = NULL; 390 break; 391 392 default: 393 394 status = AE_BAD_PARAMETER; 395 goto unlock_and_exit; 396 } 397 } 398 399 /* If the caller hasn't specified a setup routine, use the default */ 400 401 if (!setup) { 402 setup = acpi_ev_default_region_setup; 403 } 404 405 /* Check for an existing internal object */ 406 407 obj_desc = acpi_ns_get_attached_object(node); 408 if (obj_desc) { 409 /* 410 * The attached device object already exists. Make sure the handler 411 * is not already installed. 412 */ 413 handler_obj = obj_desc->device.handler; 414 415 /* Walk the handler list for this device */ 416 417 while (handler_obj) { 418 419 /* Same space_id indicates a handler already installed */ 420 421 if (handler_obj->address_space.space_id == space_id) { 422 if (handler_obj->address_space.handler == 423 handler) { 424 /* 425 * It is (relatively) OK to attempt to install the SAME 426 * handler twice. This can easily happen with the 427 * PCI_Config space. 428 */ 429 status = AE_SAME_HANDLER; 430 goto unlock_and_exit; 431 } else { 432 /* A handler is already installed */ 433 434 status = AE_ALREADY_EXISTS; 435 } 436 goto unlock_and_exit; 437 } 438 439 /* Walk the linked list of handlers */ 440 441 handler_obj = handler_obj->address_space.next; 442 } 443 } else { 444 ACPI_DEBUG_PRINT((ACPI_DB_OPREGION, 445 "Creating object on Device %p while installing handler\n", 446 node)); 447 448 /* obj_desc does not exist, create one */ 449 450 if (node->type == ACPI_TYPE_ANY) { 451 type = ACPI_TYPE_DEVICE; 452 } else { 453 type = node->type; 454 } 455 456 obj_desc = acpi_ut_create_internal_object(type); 457 if (!obj_desc) { 458 status = AE_NO_MEMORY; 459 goto unlock_and_exit; 460 } 461 462 /* Init new descriptor */ 463 464 obj_desc->common.type = (u8)type; 465 466 /* Attach the new object to the Node */ 467 468 status = acpi_ns_attach_object(node, obj_desc, type); 469 470 /* Remove local reference to the object */ 471 472 acpi_ut_remove_reference(obj_desc); 473 474 if (ACPI_FAILURE(status)) { 475 goto unlock_and_exit; 476 } 477 } 478 479 ACPI_DEBUG_PRINT((ACPI_DB_OPREGION, 480 "Installing address handler for region %s(%X) on Device %4.4s %p(%p)\n", 481 acpi_ut_get_region_name(space_id), space_id, 482 acpi_ut_get_node_name(node), node, obj_desc)); 483 484 /* 485 * Install the handler 486 * 487 * At this point there is no existing handler. Just allocate the object 488 * for the handler and link it into the list. 489 */ 490 handler_obj = 491 acpi_ut_create_internal_object(ACPI_TYPE_LOCAL_ADDRESS_HANDLER); 492 if (!handler_obj) { 493 status = AE_NO_MEMORY; 494 goto unlock_and_exit; 495 } 496 497 /* Init handler obj */ 498 499 handler_obj->address_space.space_id = (u8)space_id; 500 handler_obj->address_space.handler_flags = flags; 501 handler_obj->address_space.region_list = NULL; 502 handler_obj->address_space.node = node; 503 handler_obj->address_space.handler = handler; 504 handler_obj->address_space.context = context; 505 handler_obj->address_space.setup = setup; 506 507 /* Install at head of Device.address_space list */ 508 509 handler_obj->address_space.next = obj_desc->device.handler; 510 511 /* 512 * The Device object is the first reference on the handler_obj. 513 * Each region that uses the handler adds a reference. 514 */ 515 obj_desc->device.handler = handler_obj; 516 517 /* 518 * Walk the namespace finding all of the regions this 519 * handler will manage. 520 * 521 * Start at the device and search the branch toward 522 * the leaf nodes until either the leaf is encountered or 523 * a device is detected that has an address handler of the 524 * same type. 525 * 526 * In either case, back up and search down the remainder 527 * of the branch 528 */ 529 status = acpi_ns_walk_namespace(ACPI_TYPE_ANY, node, ACPI_UINT32_MAX, 530 ACPI_NS_WALK_UNLOCK, 531 acpi_ev_install_handler, NULL, 532 handler_obj, NULL); 533 534 unlock_and_exit: 535 return_ACPI_STATUS(status); 536 } 537