1 // SPDX-License-Identifier: BSD-3-Clause OR GPL-2.0 2 /****************************************************************************** 3 * 4 * Module Name: evgpeinit - System GPE initialization and update 5 * 6 * Copyright (C) 2000 - 2019, Intel Corp. 7 * 8 *****************************************************************************/ 9 10 #include <acpi/acpi.h> 11 #include "accommon.h" 12 #include "acevents.h" 13 #include "acnamesp.h" 14 15 #define _COMPONENT ACPI_EVENTS 16 ACPI_MODULE_NAME("evgpeinit") 17 #if (!ACPI_REDUCED_HARDWARE) /* Entire module */ 18 /* 19 * Note: History of _PRW support in ACPICA 20 * 21 * Originally (2000 - 2010), the GPE initialization code performed a walk of 22 * the entire namespace to execute the _PRW methods and detect all GPEs 23 * capable of waking the system. 24 * 25 * As of 10/2010, the _PRW method execution has been removed since it is 26 * actually unnecessary. The host OS must in fact execute all _PRW methods 27 * in order to identify the device/power-resource dependencies. We now put 28 * the onus on the host OS to identify the wake GPEs as part of this process 29 * and to inform ACPICA of these GPEs via the acpi_setup_gpe_for_wake interface. This 30 * not only reduces the complexity of the ACPICA initialization code, but in 31 * some cases (on systems with very large namespaces) it should reduce the 32 * kernel boot time as well. 33 */ 34 35 /******************************************************************************* 36 * 37 * FUNCTION: acpi_ev_gpe_initialize 38 * 39 * PARAMETERS: None 40 * 41 * RETURN: Status 42 * 43 * DESCRIPTION: Initialize the GPE data structures and the FADT GPE 0/1 blocks 44 * 45 ******************************************************************************/ 46 acpi_status acpi_ev_gpe_initialize(void) 47 { 48 u32 register_count0 = 0; 49 u32 register_count1 = 0; 50 u32 gpe_number_max = 0; 51 acpi_status status; 52 53 ACPI_FUNCTION_TRACE(ev_gpe_initialize); 54 55 ACPI_DEBUG_PRINT_RAW((ACPI_DB_INIT, 56 "Initializing General Purpose Events (GPEs):\n")); 57 58 status = acpi_ut_acquire_mutex(ACPI_MTX_NAMESPACE); 59 if (ACPI_FAILURE(status)) { 60 return_ACPI_STATUS(status); 61 } 62 63 /* 64 * Initialize the GPE Block(s) defined in the FADT 65 * 66 * Why the GPE register block lengths are divided by 2: From the ACPI 67 * Spec, section "General-Purpose Event Registers", we have: 68 * 69 * "Each register block contains two registers of equal length 70 * GPEx_STS and GPEx_EN (where x is 0 or 1). The length of the 71 * GPE0_STS and GPE0_EN registers is equal to half the GPE0_LEN 72 * The length of the GPE1_STS and GPE1_EN registers is equal to 73 * half the GPE1_LEN. If a generic register block is not supported 74 * then its respective block pointer and block length values in the 75 * FADT table contain zeros. The GPE0_LEN and GPE1_LEN do not need 76 * to be the same size." 77 */ 78 79 /* 80 * Determine the maximum GPE number for this machine. 81 * 82 * Note: both GPE0 and GPE1 are optional, and either can exist without 83 * the other. 84 * 85 * If EITHER the register length OR the block address are zero, then that 86 * particular block is not supported. 87 */ 88 if (acpi_gbl_FADT.gpe0_block_length && 89 acpi_gbl_FADT.xgpe0_block.address) { 90 91 /* GPE block 0 exists (has both length and address > 0) */ 92 93 register_count0 = (u16)(acpi_gbl_FADT.gpe0_block_length / 2); 94 gpe_number_max = 95 (register_count0 * ACPI_GPE_REGISTER_WIDTH) - 1; 96 97 /* Install GPE Block 0 */ 98 99 status = acpi_ev_create_gpe_block(acpi_gbl_fadt_gpe_device, 100 acpi_gbl_FADT.xgpe0_block. 101 address, 102 acpi_gbl_FADT.xgpe0_block. 103 space_id, register_count0, 0, 104 acpi_gbl_FADT.sci_interrupt, 105 &acpi_gbl_gpe_fadt_blocks[0]); 106 107 if (ACPI_FAILURE(status)) { 108 ACPI_EXCEPTION((AE_INFO, status, 109 "Could not create GPE Block 0")); 110 } 111 } 112 113 if (acpi_gbl_FADT.gpe1_block_length && 114 acpi_gbl_FADT.xgpe1_block.address) { 115 116 /* GPE block 1 exists (has both length and address > 0) */ 117 118 register_count1 = (u16)(acpi_gbl_FADT.gpe1_block_length / 2); 119 120 /* Check for GPE0/GPE1 overlap (if both banks exist) */ 121 122 if ((register_count0) && 123 (gpe_number_max >= acpi_gbl_FADT.gpe1_base)) { 124 ACPI_ERROR((AE_INFO, 125 "GPE0 block (GPE 0 to %u) overlaps the GPE1 block " 126 "(GPE %u to %u) - Ignoring GPE1", 127 gpe_number_max, acpi_gbl_FADT.gpe1_base, 128 acpi_gbl_FADT.gpe1_base + 129 ((register_count1 * 130 ACPI_GPE_REGISTER_WIDTH) - 1))); 131 132 /* Ignore GPE1 block by setting the register count to zero */ 133 134 register_count1 = 0; 135 } else { 136 /* Install GPE Block 1 */ 137 138 status = 139 acpi_ev_create_gpe_block(acpi_gbl_fadt_gpe_device, 140 acpi_gbl_FADT.xgpe1_block. 141 address, 142 acpi_gbl_FADT.xgpe1_block. 143 space_id, register_count1, 144 acpi_gbl_FADT.gpe1_base, 145 acpi_gbl_FADT. 146 sci_interrupt, 147 &acpi_gbl_gpe_fadt_blocks 148 [1]); 149 150 if (ACPI_FAILURE(status)) { 151 ACPI_EXCEPTION((AE_INFO, status, 152 "Could not create GPE Block 1")); 153 } 154 155 /* 156 * GPE0 and GPE1 do not have to be contiguous in the GPE number 157 * space. However, GPE0 always starts at GPE number zero. 158 */ 159 gpe_number_max = acpi_gbl_FADT.gpe1_base + 160 ((register_count1 * ACPI_GPE_REGISTER_WIDTH) - 1); 161 } 162 } 163 164 /* Exit if there are no GPE registers */ 165 166 if ((register_count0 + register_count1) == 0) { 167 168 /* GPEs are not required by ACPI, this is OK */ 169 170 ACPI_DEBUG_PRINT((ACPI_DB_INIT, 171 "There are no GPE blocks defined in the FADT\n")); 172 status = AE_OK; 173 goto cleanup; 174 } 175 176 cleanup: 177 (void)acpi_ut_release_mutex(ACPI_MTX_NAMESPACE); 178 return_ACPI_STATUS(AE_OK); 179 } 180 181 /******************************************************************************* 182 * 183 * FUNCTION: acpi_ev_update_gpes 184 * 185 * PARAMETERS: table_owner_id - ID of the newly-loaded ACPI table 186 * 187 * RETURN: None 188 * 189 * DESCRIPTION: Check for new GPE methods (_Lxx/_Exx) made available as a 190 * result of a Load() or load_table() operation. If new GPE 191 * methods have been installed, register the new methods. 192 * 193 ******************************************************************************/ 194 195 void acpi_ev_update_gpes(acpi_owner_id table_owner_id) 196 { 197 struct acpi_gpe_xrupt_info *gpe_xrupt_info; 198 struct acpi_gpe_block_info *gpe_block; 199 struct acpi_gpe_walk_info walk_info; 200 acpi_status status = AE_OK; 201 202 /* 203 * Find any _Lxx/_Exx GPE methods that have just been loaded. 204 * 205 * Any GPEs that correspond to new _Lxx/_Exx methods are immediately 206 * enabled. 207 * 208 * Examine the namespace underneath each gpe_device within the 209 * gpe_block lists. 210 */ 211 status = acpi_ut_acquire_mutex(ACPI_MTX_EVENTS); 212 if (ACPI_FAILURE(status)) { 213 return; 214 } 215 216 walk_info.count = 0; 217 walk_info.owner_id = table_owner_id; 218 walk_info.execute_by_owner_id = TRUE; 219 220 /* Walk the interrupt level descriptor list */ 221 222 gpe_xrupt_info = acpi_gbl_gpe_xrupt_list_head; 223 while (gpe_xrupt_info) { 224 225 /* Walk all Gpe Blocks attached to this interrupt level */ 226 227 gpe_block = gpe_xrupt_info->gpe_block_list_head; 228 while (gpe_block) { 229 walk_info.gpe_block = gpe_block; 230 walk_info.gpe_device = gpe_block->node; 231 232 status = acpi_ns_walk_namespace(ACPI_TYPE_METHOD, 233 walk_info.gpe_device, 234 ACPI_UINT32_MAX, 235 ACPI_NS_WALK_NO_UNLOCK, 236 acpi_ev_match_gpe_method, 237 NULL, &walk_info, NULL); 238 if (ACPI_FAILURE(status)) { 239 ACPI_EXCEPTION((AE_INFO, status, 240 "While decoding _Lxx/_Exx methods")); 241 } 242 243 gpe_block = gpe_block->next; 244 } 245 246 gpe_xrupt_info = gpe_xrupt_info->next; 247 } 248 249 if (walk_info.count) { 250 ACPI_INFO(("Enabled %u new GPEs", walk_info.count)); 251 } 252 253 (void)acpi_ut_release_mutex(ACPI_MTX_EVENTS); 254 return; 255 } 256 257 /******************************************************************************* 258 * 259 * FUNCTION: acpi_ev_match_gpe_method 260 * 261 * PARAMETERS: Callback from walk_namespace 262 * 263 * RETURN: Status 264 * 265 * DESCRIPTION: Called from acpi_walk_namespace. Expects each object to be a 266 * control method under the _GPE portion of the namespace. 267 * Extract the name and GPE type from the object, saving this 268 * information for quick lookup during GPE dispatch. Allows a 269 * per-owner_id evaluation if execute_by_owner_id is TRUE in the 270 * walk_info parameter block. 271 * 272 * The name of each GPE control method is of the form: 273 * "_Lxx" or "_Exx", where: 274 * L - means that the GPE is level triggered 275 * E - means that the GPE is edge triggered 276 * xx - is the GPE number [in HEX] 277 * 278 * If walk_info->execute_by_owner_id is TRUE, we only execute examine GPE methods 279 * with that owner. 280 * 281 ******************************************************************************/ 282 283 acpi_status 284 acpi_ev_match_gpe_method(acpi_handle obj_handle, 285 u32 level, void *context, void **return_value) 286 { 287 struct acpi_namespace_node *method_node = 288 ACPI_CAST_PTR(struct acpi_namespace_node, obj_handle); 289 struct acpi_gpe_walk_info *walk_info = 290 ACPI_CAST_PTR(struct acpi_gpe_walk_info, context); 291 struct acpi_gpe_event_info *gpe_event_info; 292 acpi_status status; 293 u32 gpe_number; 294 u8 temp_gpe_number; 295 char name[ACPI_NAME_SIZE + 1]; 296 u8 type; 297 298 ACPI_FUNCTION_TRACE(ev_match_gpe_method); 299 300 /* Check if requested owner_id matches this owner_id */ 301 302 if ((walk_info->execute_by_owner_id) && 303 (method_node->owner_id != walk_info->owner_id)) { 304 return_ACPI_STATUS(AE_OK); 305 } 306 307 /* 308 * Match and decode the _Lxx and _Exx GPE method names 309 * 310 * 1) Extract the method name and null terminate it 311 */ 312 ACPI_MOVE_32_TO_32(name, &method_node->name.integer); 313 name[ACPI_NAME_SIZE] = 0; 314 315 /* 2) Name must begin with an underscore */ 316 317 if (name[0] != '_') { 318 return_ACPI_STATUS(AE_OK); /* Ignore this method */ 319 } 320 321 /* 322 * 3) Edge/Level determination is based on the 2nd character 323 * of the method name 324 */ 325 switch (name[1]) { 326 case 'L': 327 328 type = ACPI_GPE_LEVEL_TRIGGERED; 329 break; 330 331 case 'E': 332 333 type = ACPI_GPE_EDGE_TRIGGERED; 334 break; 335 336 default: 337 338 /* Unknown method type, just ignore it */ 339 340 ACPI_DEBUG_PRINT((ACPI_DB_LOAD, 341 "Ignoring unknown GPE method type: %s " 342 "(name not of form _Lxx or _Exx)", name)); 343 return_ACPI_STATUS(AE_OK); 344 } 345 346 /* 4) The last two characters of the name are the hex GPE Number */ 347 348 status = acpi_ut_ascii_to_hex_byte(&name[2], &temp_gpe_number); 349 if (ACPI_FAILURE(status)) { 350 351 /* Conversion failed; invalid method, just ignore it */ 352 353 ACPI_DEBUG_PRINT((ACPI_DB_LOAD, 354 "Could not extract GPE number from name: %s " 355 "(name is not of form _Lxx or _Exx)", name)); 356 return_ACPI_STATUS(AE_OK); 357 } 358 359 /* Ensure that we have a valid GPE number for this GPE block */ 360 361 gpe_number = (u32)temp_gpe_number; 362 gpe_event_info = 363 acpi_ev_low_get_gpe_info(gpe_number, walk_info->gpe_block); 364 if (!gpe_event_info) { 365 /* 366 * This gpe_number is not valid for this GPE block, just ignore it. 367 * However, it may be valid for a different GPE block, since GPE0 368 * and GPE1 methods both appear under \_GPE. 369 */ 370 return_ACPI_STATUS(AE_OK); 371 } 372 373 if ((ACPI_GPE_DISPATCH_TYPE(gpe_event_info->flags) == 374 ACPI_GPE_DISPATCH_HANDLER) || 375 (ACPI_GPE_DISPATCH_TYPE(gpe_event_info->flags) == 376 ACPI_GPE_DISPATCH_RAW_HANDLER)) { 377 378 /* If there is already a handler, ignore this GPE method */ 379 380 return_ACPI_STATUS(AE_OK); 381 } 382 383 if (ACPI_GPE_DISPATCH_TYPE(gpe_event_info->flags) == 384 ACPI_GPE_DISPATCH_METHOD) { 385 /* 386 * If there is already a method, ignore this method. But check 387 * for a type mismatch (if both the _Lxx AND _Exx exist) 388 */ 389 if (type != (gpe_event_info->flags & ACPI_GPE_XRUPT_TYPE_MASK)) { 390 ACPI_ERROR((AE_INFO, 391 "For GPE 0x%.2X, found both _L%2.2X and _E%2.2X methods", 392 gpe_number, gpe_number, gpe_number)); 393 } 394 return_ACPI_STATUS(AE_OK); 395 } 396 397 /* Disable the GPE in case it's been enabled already. */ 398 399 (void)acpi_hw_low_set_gpe(gpe_event_info, ACPI_GPE_DISABLE); 400 401 /* 402 * Add the GPE information from above to the gpe_event_info block for 403 * use during dispatch of this GPE. 404 */ 405 gpe_event_info->flags &= ~(ACPI_GPE_DISPATCH_MASK); 406 gpe_event_info->flags |= (u8)(type | ACPI_GPE_DISPATCH_METHOD); 407 gpe_event_info->dispatch.method_node = method_node; 408 409 ACPI_DEBUG_PRINT((ACPI_DB_LOAD, 410 "Registered GPE method %s as GPE number 0x%.2X\n", 411 name, gpe_number)); 412 return_ACPI_STATUS(AE_OK); 413 } 414 415 #endif /* !ACPI_REDUCED_HARDWARE */ 416