xref: /openbmc/linux/drivers/acpi/acpi_lpss.c (revision 6396bb221514d2876fd6dc0aa2a1f240d99b37bb)
1 /*
2  * ACPI support for Intel Lynxpoint LPSS.
3  *
4  * Copyright (C) 2013, Intel Corporation
5  * Authors: Mika Westerberg <mika.westerberg@linux.intel.com>
6  *          Rafael J. Wysocki <rafael.j.wysocki@intel.com>
7  *
8  * This program is free software; you can redistribute it and/or modify
9  * it under the terms of the GNU General Public License version 2 as
10  * published by the Free Software Foundation.
11  */
12 
13 #include <linux/acpi.h>
14 #include <linux/clkdev.h>
15 #include <linux/clk-provider.h>
16 #include <linux/err.h>
17 #include <linux/io.h>
18 #include <linux/mutex.h>
19 #include <linux/platform_device.h>
20 #include <linux/platform_data/clk-lpss.h>
21 #include <linux/platform_data/x86/pmc_atom.h>
22 #include <linux/pm_domain.h>
23 #include <linux/pm_runtime.h>
24 #include <linux/pwm.h>
25 #include <linux/delay.h>
26 
27 #include "internal.h"
28 
29 ACPI_MODULE_NAME("acpi_lpss");
30 
31 #ifdef CONFIG_X86_INTEL_LPSS
32 
33 #include <asm/cpu_device_id.h>
34 #include <asm/intel-family.h>
35 #include <asm/iosf_mbi.h>
36 
37 #define LPSS_ADDR(desc) ((unsigned long)&desc)
38 
39 #define LPSS_CLK_SIZE	0x04
40 #define LPSS_LTR_SIZE	0x18
41 
42 /* Offsets relative to LPSS_PRIVATE_OFFSET */
43 #define LPSS_CLK_DIVIDER_DEF_MASK	(BIT(1) | BIT(16))
44 #define LPSS_RESETS			0x04
45 #define LPSS_RESETS_RESET_FUNC		BIT(0)
46 #define LPSS_RESETS_RESET_APB		BIT(1)
47 #define LPSS_GENERAL			0x08
48 #define LPSS_GENERAL_LTR_MODE_SW	BIT(2)
49 #define LPSS_GENERAL_UART_RTS_OVRD	BIT(3)
50 #define LPSS_SW_LTR			0x10
51 #define LPSS_AUTO_LTR			0x14
52 #define LPSS_LTR_SNOOP_REQ		BIT(15)
53 #define LPSS_LTR_SNOOP_MASK		0x0000FFFF
54 #define LPSS_LTR_SNOOP_LAT_1US		0x800
55 #define LPSS_LTR_SNOOP_LAT_32US		0xC00
56 #define LPSS_LTR_SNOOP_LAT_SHIFT	5
57 #define LPSS_LTR_SNOOP_LAT_CUTOFF	3000
58 #define LPSS_LTR_MAX_VAL		0x3FF
59 #define LPSS_TX_INT			0x20
60 #define LPSS_TX_INT_MASK		BIT(1)
61 
62 #define LPSS_PRV_REG_COUNT		9
63 
64 /* LPSS Flags */
65 #define LPSS_CLK			BIT(0)
66 #define LPSS_CLK_GATE			BIT(1)
67 #define LPSS_CLK_DIVIDER		BIT(2)
68 #define LPSS_LTR			BIT(3)
69 #define LPSS_SAVE_CTX			BIT(4)
70 #define LPSS_NO_D3_DELAY		BIT(5)
71 
72 /* Crystal Cove PMIC shares same ACPI ID between different platforms */
73 #define BYT_CRC_HRV			2
74 #define CHT_CRC_HRV			3
75 
76 struct lpss_private_data;
77 
78 struct lpss_device_desc {
79 	unsigned int flags;
80 	const char *clk_con_id;
81 	unsigned int prv_offset;
82 	size_t prv_size_override;
83 	struct property_entry *properties;
84 	void (*setup)(struct lpss_private_data *pdata);
85 };
86 
87 static const struct lpss_device_desc lpss_dma_desc = {
88 	.flags = LPSS_CLK,
89 };
90 
91 struct lpss_private_data {
92 	struct acpi_device *adev;
93 	void __iomem *mmio_base;
94 	resource_size_t mmio_size;
95 	unsigned int fixed_clk_rate;
96 	struct clk *clk;
97 	const struct lpss_device_desc *dev_desc;
98 	u32 prv_reg_ctx[LPSS_PRV_REG_COUNT];
99 };
100 
101 /* LPSS run time quirks */
102 static unsigned int lpss_quirks;
103 
104 /*
105  * LPSS_QUIRK_ALWAYS_POWER_ON: override power state for LPSS DMA device.
106  *
107  * The LPSS DMA controller has neither _PS0 nor _PS3 method. Moreover
108  * it can be powered off automatically whenever the last LPSS device goes down.
109  * In case of no power any access to the DMA controller will hang the system.
110  * The behaviour is reproduced on some HP laptops based on Intel BayTrail as
111  * well as on ASuS T100TA transformer.
112  *
113  * This quirk overrides power state of entire LPSS island to keep DMA powered
114  * on whenever we have at least one other device in use.
115  */
116 #define LPSS_QUIRK_ALWAYS_POWER_ON	BIT(0)
117 
118 /* UART Component Parameter Register */
119 #define LPSS_UART_CPR			0xF4
120 #define LPSS_UART_CPR_AFCE		BIT(4)
121 
122 static void lpss_uart_setup(struct lpss_private_data *pdata)
123 {
124 	unsigned int offset;
125 	u32 val;
126 
127 	offset = pdata->dev_desc->prv_offset + LPSS_TX_INT;
128 	val = readl(pdata->mmio_base + offset);
129 	writel(val | LPSS_TX_INT_MASK, pdata->mmio_base + offset);
130 
131 	val = readl(pdata->mmio_base + LPSS_UART_CPR);
132 	if (!(val & LPSS_UART_CPR_AFCE)) {
133 		offset = pdata->dev_desc->prv_offset + LPSS_GENERAL;
134 		val = readl(pdata->mmio_base + offset);
135 		val |= LPSS_GENERAL_UART_RTS_OVRD;
136 		writel(val, pdata->mmio_base + offset);
137 	}
138 }
139 
140 static void lpss_deassert_reset(struct lpss_private_data *pdata)
141 {
142 	unsigned int offset;
143 	u32 val;
144 
145 	offset = pdata->dev_desc->prv_offset + LPSS_RESETS;
146 	val = readl(pdata->mmio_base + offset);
147 	val |= LPSS_RESETS_RESET_APB | LPSS_RESETS_RESET_FUNC;
148 	writel(val, pdata->mmio_base + offset);
149 }
150 
151 /*
152  * BYT PWM used for backlight control by the i915 driver on systems without
153  * the Crystal Cove PMIC.
154  */
155 static struct pwm_lookup byt_pwm_lookup[] = {
156 	PWM_LOOKUP_WITH_MODULE("80860F09:00", 0, "0000:00:02.0",
157 			       "pwm_backlight", 0, PWM_POLARITY_NORMAL,
158 			       "pwm-lpss-platform"),
159 };
160 
161 static void byt_pwm_setup(struct lpss_private_data *pdata)
162 {
163 	struct acpi_device *adev = pdata->adev;
164 
165 	/* Only call pwm_add_table for the first PWM controller */
166 	if (!adev->pnp.unique_id || strcmp(adev->pnp.unique_id, "1"))
167 		return;
168 
169 	if (!acpi_dev_present("INT33FD", NULL, BYT_CRC_HRV))
170 		pwm_add_table(byt_pwm_lookup, ARRAY_SIZE(byt_pwm_lookup));
171 }
172 
173 #define LPSS_I2C_ENABLE			0x6c
174 
175 static void byt_i2c_setup(struct lpss_private_data *pdata)
176 {
177 	lpss_deassert_reset(pdata);
178 
179 	if (readl(pdata->mmio_base + pdata->dev_desc->prv_offset))
180 		pdata->fixed_clk_rate = 133000000;
181 
182 	writel(0, pdata->mmio_base + LPSS_I2C_ENABLE);
183 }
184 
185 /* BSW PWM used for backlight control by the i915 driver */
186 static struct pwm_lookup bsw_pwm_lookup[] = {
187 	PWM_LOOKUP_WITH_MODULE("80862288:00", 0, "0000:00:02.0",
188 			       "pwm_backlight", 0, PWM_POLARITY_NORMAL,
189 			       "pwm-lpss-platform"),
190 };
191 
192 static void bsw_pwm_setup(struct lpss_private_data *pdata)
193 {
194 	struct acpi_device *adev = pdata->adev;
195 
196 	/* Only call pwm_add_table for the first PWM controller */
197 	if (!adev->pnp.unique_id || strcmp(adev->pnp.unique_id, "1"))
198 		return;
199 
200 	pwm_add_table(bsw_pwm_lookup, ARRAY_SIZE(bsw_pwm_lookup));
201 }
202 
203 static const struct lpss_device_desc lpt_dev_desc = {
204 	.flags = LPSS_CLK | LPSS_CLK_GATE | LPSS_CLK_DIVIDER | LPSS_LTR,
205 	.prv_offset = 0x800,
206 };
207 
208 static const struct lpss_device_desc lpt_i2c_dev_desc = {
209 	.flags = LPSS_CLK | LPSS_CLK_GATE | LPSS_LTR,
210 	.prv_offset = 0x800,
211 };
212 
213 static struct property_entry uart_properties[] = {
214 	PROPERTY_ENTRY_U32("reg-io-width", 4),
215 	PROPERTY_ENTRY_U32("reg-shift", 2),
216 	PROPERTY_ENTRY_BOOL("snps,uart-16550-compatible"),
217 	{ },
218 };
219 
220 static const struct lpss_device_desc lpt_uart_dev_desc = {
221 	.flags = LPSS_CLK | LPSS_CLK_GATE | LPSS_CLK_DIVIDER | LPSS_LTR,
222 	.clk_con_id = "baudclk",
223 	.prv_offset = 0x800,
224 	.setup = lpss_uart_setup,
225 	.properties = uart_properties,
226 };
227 
228 static const struct lpss_device_desc lpt_sdio_dev_desc = {
229 	.flags = LPSS_LTR,
230 	.prv_offset = 0x1000,
231 	.prv_size_override = 0x1018,
232 };
233 
234 static const struct lpss_device_desc byt_pwm_dev_desc = {
235 	.flags = LPSS_SAVE_CTX,
236 	.setup = byt_pwm_setup,
237 };
238 
239 static const struct lpss_device_desc bsw_pwm_dev_desc = {
240 	.flags = LPSS_SAVE_CTX | LPSS_NO_D3_DELAY,
241 	.setup = bsw_pwm_setup,
242 };
243 
244 static const struct lpss_device_desc byt_uart_dev_desc = {
245 	.flags = LPSS_CLK | LPSS_CLK_GATE | LPSS_CLK_DIVIDER | LPSS_SAVE_CTX,
246 	.clk_con_id = "baudclk",
247 	.prv_offset = 0x800,
248 	.setup = lpss_uart_setup,
249 	.properties = uart_properties,
250 };
251 
252 static const struct lpss_device_desc bsw_uart_dev_desc = {
253 	.flags = LPSS_CLK | LPSS_CLK_GATE | LPSS_CLK_DIVIDER | LPSS_SAVE_CTX
254 			| LPSS_NO_D3_DELAY,
255 	.clk_con_id = "baudclk",
256 	.prv_offset = 0x800,
257 	.setup = lpss_uart_setup,
258 	.properties = uart_properties,
259 };
260 
261 static const struct lpss_device_desc byt_spi_dev_desc = {
262 	.flags = LPSS_CLK | LPSS_CLK_GATE | LPSS_CLK_DIVIDER | LPSS_SAVE_CTX,
263 	.prv_offset = 0x400,
264 };
265 
266 static const struct lpss_device_desc byt_sdio_dev_desc = {
267 	.flags = LPSS_CLK,
268 };
269 
270 static const struct lpss_device_desc byt_i2c_dev_desc = {
271 	.flags = LPSS_CLK | LPSS_SAVE_CTX,
272 	.prv_offset = 0x800,
273 	.setup = byt_i2c_setup,
274 };
275 
276 static const struct lpss_device_desc bsw_i2c_dev_desc = {
277 	.flags = LPSS_CLK | LPSS_SAVE_CTX | LPSS_NO_D3_DELAY,
278 	.prv_offset = 0x800,
279 	.setup = byt_i2c_setup,
280 };
281 
282 static const struct lpss_device_desc bsw_spi_dev_desc = {
283 	.flags = LPSS_CLK | LPSS_CLK_GATE | LPSS_CLK_DIVIDER | LPSS_SAVE_CTX
284 			| LPSS_NO_D3_DELAY,
285 	.prv_offset = 0x400,
286 	.setup = lpss_deassert_reset,
287 };
288 
289 #define ICPU(model)	{ X86_VENDOR_INTEL, 6, model, X86_FEATURE_ANY, }
290 
291 static const struct x86_cpu_id lpss_cpu_ids[] = {
292 	ICPU(INTEL_FAM6_ATOM_SILVERMONT1),	/* Valleyview, Bay Trail */
293 	ICPU(INTEL_FAM6_ATOM_AIRMONT),	/* Braswell, Cherry Trail */
294 	{}
295 };
296 
297 #else
298 
299 #define LPSS_ADDR(desc) (0UL)
300 
301 #endif /* CONFIG_X86_INTEL_LPSS */
302 
303 static const struct acpi_device_id acpi_lpss_device_ids[] = {
304 	/* Generic LPSS devices */
305 	{ "INTL9C60", LPSS_ADDR(lpss_dma_desc) },
306 
307 	/* Lynxpoint LPSS devices */
308 	{ "INT33C0", LPSS_ADDR(lpt_dev_desc) },
309 	{ "INT33C1", LPSS_ADDR(lpt_dev_desc) },
310 	{ "INT33C2", LPSS_ADDR(lpt_i2c_dev_desc) },
311 	{ "INT33C3", LPSS_ADDR(lpt_i2c_dev_desc) },
312 	{ "INT33C4", LPSS_ADDR(lpt_uart_dev_desc) },
313 	{ "INT33C5", LPSS_ADDR(lpt_uart_dev_desc) },
314 	{ "INT33C6", LPSS_ADDR(lpt_sdio_dev_desc) },
315 	{ "INT33C7", },
316 
317 	/* BayTrail LPSS devices */
318 	{ "80860F09", LPSS_ADDR(byt_pwm_dev_desc) },
319 	{ "80860F0A", LPSS_ADDR(byt_uart_dev_desc) },
320 	{ "80860F0E", LPSS_ADDR(byt_spi_dev_desc) },
321 	{ "80860F14", LPSS_ADDR(byt_sdio_dev_desc) },
322 	{ "80860F41", LPSS_ADDR(byt_i2c_dev_desc) },
323 	{ "INT33B2", },
324 	{ "INT33FC", },
325 
326 	/* Braswell LPSS devices */
327 	{ "80862288", LPSS_ADDR(bsw_pwm_dev_desc) },
328 	{ "8086228A", LPSS_ADDR(bsw_uart_dev_desc) },
329 	{ "8086228E", LPSS_ADDR(bsw_spi_dev_desc) },
330 	{ "808622C1", LPSS_ADDR(bsw_i2c_dev_desc) },
331 
332 	/* Broadwell LPSS devices */
333 	{ "INT3430", LPSS_ADDR(lpt_dev_desc) },
334 	{ "INT3431", LPSS_ADDR(lpt_dev_desc) },
335 	{ "INT3432", LPSS_ADDR(lpt_i2c_dev_desc) },
336 	{ "INT3433", LPSS_ADDR(lpt_i2c_dev_desc) },
337 	{ "INT3434", LPSS_ADDR(lpt_uart_dev_desc) },
338 	{ "INT3435", LPSS_ADDR(lpt_uart_dev_desc) },
339 	{ "INT3436", LPSS_ADDR(lpt_sdio_dev_desc) },
340 	{ "INT3437", },
341 
342 	/* Wildcat Point LPSS devices */
343 	{ "INT3438", LPSS_ADDR(lpt_dev_desc) },
344 
345 	{ }
346 };
347 
348 #ifdef CONFIG_X86_INTEL_LPSS
349 
350 static int is_memory(struct acpi_resource *res, void *not_used)
351 {
352 	struct resource r;
353 	return !acpi_dev_resource_memory(res, &r);
354 }
355 
356 /* LPSS main clock device. */
357 static struct platform_device *lpss_clk_dev;
358 
359 static inline void lpt_register_clock_device(void)
360 {
361 	lpss_clk_dev = platform_device_register_simple("clk-lpt", -1, NULL, 0);
362 }
363 
364 static int register_device_clock(struct acpi_device *adev,
365 				 struct lpss_private_data *pdata)
366 {
367 	const struct lpss_device_desc *dev_desc = pdata->dev_desc;
368 	const char *devname = dev_name(&adev->dev);
369 	struct clk *clk;
370 	struct lpss_clk_data *clk_data;
371 	const char *parent, *clk_name;
372 	void __iomem *prv_base;
373 
374 	if (!lpss_clk_dev)
375 		lpt_register_clock_device();
376 
377 	clk_data = platform_get_drvdata(lpss_clk_dev);
378 	if (!clk_data)
379 		return -ENODEV;
380 	clk = clk_data->clk;
381 
382 	if (!pdata->mmio_base
383 	    || pdata->mmio_size < dev_desc->prv_offset + LPSS_CLK_SIZE)
384 		return -ENODATA;
385 
386 	parent = clk_data->name;
387 	prv_base = pdata->mmio_base + dev_desc->prv_offset;
388 
389 	if (pdata->fixed_clk_rate) {
390 		clk = clk_register_fixed_rate(NULL, devname, parent, 0,
391 					      pdata->fixed_clk_rate);
392 		goto out;
393 	}
394 
395 	if (dev_desc->flags & LPSS_CLK_GATE) {
396 		clk = clk_register_gate(NULL, devname, parent, 0,
397 					prv_base, 0, 0, NULL);
398 		parent = devname;
399 	}
400 
401 	if (dev_desc->flags & LPSS_CLK_DIVIDER) {
402 		/* Prevent division by zero */
403 		if (!readl(prv_base))
404 			writel(LPSS_CLK_DIVIDER_DEF_MASK, prv_base);
405 
406 		clk_name = kasprintf(GFP_KERNEL, "%s-div", devname);
407 		if (!clk_name)
408 			return -ENOMEM;
409 		clk = clk_register_fractional_divider(NULL, clk_name, parent,
410 						      0, prv_base,
411 						      1, 15, 16, 15, 0, NULL);
412 		parent = clk_name;
413 
414 		clk_name = kasprintf(GFP_KERNEL, "%s-update", devname);
415 		if (!clk_name) {
416 			kfree(parent);
417 			return -ENOMEM;
418 		}
419 		clk = clk_register_gate(NULL, clk_name, parent,
420 					CLK_SET_RATE_PARENT | CLK_SET_RATE_GATE,
421 					prv_base, 31, 0, NULL);
422 		kfree(parent);
423 		kfree(clk_name);
424 	}
425 out:
426 	if (IS_ERR(clk))
427 		return PTR_ERR(clk);
428 
429 	pdata->clk = clk;
430 	clk_register_clkdev(clk, dev_desc->clk_con_id, devname);
431 	return 0;
432 }
433 
434 struct lpss_device_links {
435 	const char *supplier_hid;
436 	const char *supplier_uid;
437 	const char *consumer_hid;
438 	const char *consumer_uid;
439 	u32 flags;
440 };
441 
442 /*
443  * The _DEP method is used to identify dependencies but instead of creating
444  * device links for every handle in _DEP, only links in the following list are
445  * created. That is necessary because, in the general case, _DEP can refer to
446  * devices that might not have drivers, or that are on different buses, or where
447  * the supplier is not enumerated until after the consumer is probed.
448  */
449 static const struct lpss_device_links lpss_device_links[] = {
450 	{"808622C1", "7", "80860F14", "3", DL_FLAG_PM_RUNTIME},
451 };
452 
453 static bool hid_uid_match(const char *hid1, const char *uid1,
454 			  const char *hid2, const char *uid2)
455 {
456 	return !strcmp(hid1, hid2) && uid1 && uid2 && !strcmp(uid1, uid2);
457 }
458 
459 static bool acpi_lpss_is_supplier(struct acpi_device *adev,
460 				  const struct lpss_device_links *link)
461 {
462 	return hid_uid_match(acpi_device_hid(adev), acpi_device_uid(adev),
463 			     link->supplier_hid, link->supplier_uid);
464 }
465 
466 static bool acpi_lpss_is_consumer(struct acpi_device *adev,
467 				  const struct lpss_device_links *link)
468 {
469 	return hid_uid_match(acpi_device_hid(adev), acpi_device_uid(adev),
470 			     link->consumer_hid, link->consumer_uid);
471 }
472 
473 struct hid_uid {
474 	const char *hid;
475 	const char *uid;
476 };
477 
478 static int match_hid_uid(struct device *dev, void *data)
479 {
480 	struct acpi_device *adev = ACPI_COMPANION(dev);
481 	struct hid_uid *id = data;
482 
483 	if (!adev)
484 		return 0;
485 
486 	return hid_uid_match(acpi_device_hid(adev), acpi_device_uid(adev),
487 			     id->hid, id->uid);
488 }
489 
490 static struct device *acpi_lpss_find_device(const char *hid, const char *uid)
491 {
492 	struct hid_uid data = {
493 		.hid = hid,
494 		.uid = uid,
495 	};
496 
497 	return bus_find_device(&platform_bus_type, NULL, &data, match_hid_uid);
498 }
499 
500 static bool acpi_lpss_dep(struct acpi_device *adev, acpi_handle handle)
501 {
502 	struct acpi_handle_list dep_devices;
503 	acpi_status status;
504 	int i;
505 
506 	if (!acpi_has_method(adev->handle, "_DEP"))
507 		return false;
508 
509 	status = acpi_evaluate_reference(adev->handle, "_DEP", NULL,
510 					 &dep_devices);
511 	if (ACPI_FAILURE(status)) {
512 		dev_dbg(&adev->dev, "Failed to evaluate _DEP.\n");
513 		return false;
514 	}
515 
516 	for (i = 0; i < dep_devices.count; i++) {
517 		if (dep_devices.handles[i] == handle)
518 			return true;
519 	}
520 
521 	return false;
522 }
523 
524 static void acpi_lpss_link_consumer(struct device *dev1,
525 				    const struct lpss_device_links *link)
526 {
527 	struct device *dev2;
528 
529 	dev2 = acpi_lpss_find_device(link->consumer_hid, link->consumer_uid);
530 	if (!dev2)
531 		return;
532 
533 	if (acpi_lpss_dep(ACPI_COMPANION(dev2), ACPI_HANDLE(dev1)))
534 		device_link_add(dev2, dev1, link->flags);
535 
536 	put_device(dev2);
537 }
538 
539 static void acpi_lpss_link_supplier(struct device *dev1,
540 				    const struct lpss_device_links *link)
541 {
542 	struct device *dev2;
543 
544 	dev2 = acpi_lpss_find_device(link->supplier_hid, link->supplier_uid);
545 	if (!dev2)
546 		return;
547 
548 	if (acpi_lpss_dep(ACPI_COMPANION(dev1), ACPI_HANDLE(dev2)))
549 		device_link_add(dev1, dev2, link->flags);
550 
551 	put_device(dev2);
552 }
553 
554 static void acpi_lpss_create_device_links(struct acpi_device *adev,
555 					  struct platform_device *pdev)
556 {
557 	int i;
558 
559 	for (i = 0; i < ARRAY_SIZE(lpss_device_links); i++) {
560 		const struct lpss_device_links *link = &lpss_device_links[i];
561 
562 		if (acpi_lpss_is_supplier(adev, link))
563 			acpi_lpss_link_consumer(&pdev->dev, link);
564 
565 		if (acpi_lpss_is_consumer(adev, link))
566 			acpi_lpss_link_supplier(&pdev->dev, link);
567 	}
568 }
569 
570 static int acpi_lpss_create_device(struct acpi_device *adev,
571 				   const struct acpi_device_id *id)
572 {
573 	const struct lpss_device_desc *dev_desc;
574 	struct lpss_private_data *pdata;
575 	struct resource_entry *rentry;
576 	struct list_head resource_list;
577 	struct platform_device *pdev;
578 	int ret;
579 
580 	dev_desc = (const struct lpss_device_desc *)id->driver_data;
581 	if (!dev_desc) {
582 		pdev = acpi_create_platform_device(adev, NULL);
583 		return IS_ERR_OR_NULL(pdev) ? PTR_ERR(pdev) : 1;
584 	}
585 	pdata = kzalloc(sizeof(*pdata), GFP_KERNEL);
586 	if (!pdata)
587 		return -ENOMEM;
588 
589 	INIT_LIST_HEAD(&resource_list);
590 	ret = acpi_dev_get_resources(adev, &resource_list, is_memory, NULL);
591 	if (ret < 0)
592 		goto err_out;
593 
594 	list_for_each_entry(rentry, &resource_list, node)
595 		if (resource_type(rentry->res) == IORESOURCE_MEM) {
596 			if (dev_desc->prv_size_override)
597 				pdata->mmio_size = dev_desc->prv_size_override;
598 			else
599 				pdata->mmio_size = resource_size(rentry->res);
600 			pdata->mmio_base = ioremap(rentry->res->start,
601 						   pdata->mmio_size);
602 			break;
603 		}
604 
605 	acpi_dev_free_resource_list(&resource_list);
606 
607 	if (!pdata->mmio_base) {
608 		/* Avoid acpi_bus_attach() instantiating a pdev for this dev. */
609 		adev->pnp.type.platform_id = 0;
610 		/* Skip the device, but continue the namespace scan. */
611 		ret = 0;
612 		goto err_out;
613 	}
614 
615 	pdata->adev = adev;
616 	pdata->dev_desc = dev_desc;
617 
618 	if (dev_desc->setup)
619 		dev_desc->setup(pdata);
620 
621 	if (dev_desc->flags & LPSS_CLK) {
622 		ret = register_device_clock(adev, pdata);
623 		if (ret) {
624 			/* Skip the device, but continue the namespace scan. */
625 			ret = 0;
626 			goto err_out;
627 		}
628 	}
629 
630 	/*
631 	 * This works around a known issue in ACPI tables where LPSS devices
632 	 * have _PS0 and _PS3 without _PSC (and no power resources), so
633 	 * acpi_bus_init_power() will assume that the BIOS has put them into D0.
634 	 */
635 	ret = acpi_device_fix_up_power(adev);
636 	if (ret) {
637 		/* Skip the device, but continue the namespace scan. */
638 		ret = 0;
639 		goto err_out;
640 	}
641 
642 	adev->driver_data = pdata;
643 	pdev = acpi_create_platform_device(adev, dev_desc->properties);
644 	if (!IS_ERR_OR_NULL(pdev)) {
645 		acpi_lpss_create_device_links(adev, pdev);
646 		return 1;
647 	}
648 
649 	ret = PTR_ERR(pdev);
650 	adev->driver_data = NULL;
651 
652  err_out:
653 	kfree(pdata);
654 	return ret;
655 }
656 
657 static u32 __lpss_reg_read(struct lpss_private_data *pdata, unsigned int reg)
658 {
659 	return readl(pdata->mmio_base + pdata->dev_desc->prv_offset + reg);
660 }
661 
662 static void __lpss_reg_write(u32 val, struct lpss_private_data *pdata,
663 			     unsigned int reg)
664 {
665 	writel(val, pdata->mmio_base + pdata->dev_desc->prv_offset + reg);
666 }
667 
668 static int lpss_reg_read(struct device *dev, unsigned int reg, u32 *val)
669 {
670 	struct acpi_device *adev;
671 	struct lpss_private_data *pdata;
672 	unsigned long flags;
673 	int ret;
674 
675 	ret = acpi_bus_get_device(ACPI_HANDLE(dev), &adev);
676 	if (WARN_ON(ret))
677 		return ret;
678 
679 	spin_lock_irqsave(&dev->power.lock, flags);
680 	if (pm_runtime_suspended(dev)) {
681 		ret = -EAGAIN;
682 		goto out;
683 	}
684 	pdata = acpi_driver_data(adev);
685 	if (WARN_ON(!pdata || !pdata->mmio_base)) {
686 		ret = -ENODEV;
687 		goto out;
688 	}
689 	*val = __lpss_reg_read(pdata, reg);
690 
691  out:
692 	spin_unlock_irqrestore(&dev->power.lock, flags);
693 	return ret;
694 }
695 
696 static ssize_t lpss_ltr_show(struct device *dev, struct device_attribute *attr,
697 			     char *buf)
698 {
699 	u32 ltr_value = 0;
700 	unsigned int reg;
701 	int ret;
702 
703 	reg = strcmp(attr->attr.name, "auto_ltr") ? LPSS_SW_LTR : LPSS_AUTO_LTR;
704 	ret = lpss_reg_read(dev, reg, &ltr_value);
705 	if (ret)
706 		return ret;
707 
708 	return snprintf(buf, PAGE_SIZE, "%08x\n", ltr_value);
709 }
710 
711 static ssize_t lpss_ltr_mode_show(struct device *dev,
712 				  struct device_attribute *attr, char *buf)
713 {
714 	u32 ltr_mode = 0;
715 	char *outstr;
716 	int ret;
717 
718 	ret = lpss_reg_read(dev, LPSS_GENERAL, &ltr_mode);
719 	if (ret)
720 		return ret;
721 
722 	outstr = (ltr_mode & LPSS_GENERAL_LTR_MODE_SW) ? "sw" : "auto";
723 	return sprintf(buf, "%s\n", outstr);
724 }
725 
726 static DEVICE_ATTR(auto_ltr, S_IRUSR, lpss_ltr_show, NULL);
727 static DEVICE_ATTR(sw_ltr, S_IRUSR, lpss_ltr_show, NULL);
728 static DEVICE_ATTR(ltr_mode, S_IRUSR, lpss_ltr_mode_show, NULL);
729 
730 static struct attribute *lpss_attrs[] = {
731 	&dev_attr_auto_ltr.attr,
732 	&dev_attr_sw_ltr.attr,
733 	&dev_attr_ltr_mode.attr,
734 	NULL,
735 };
736 
737 static const struct attribute_group lpss_attr_group = {
738 	.attrs = lpss_attrs,
739 	.name = "lpss_ltr",
740 };
741 
742 static void acpi_lpss_set_ltr(struct device *dev, s32 val)
743 {
744 	struct lpss_private_data *pdata = acpi_driver_data(ACPI_COMPANION(dev));
745 	u32 ltr_mode, ltr_val;
746 
747 	ltr_mode = __lpss_reg_read(pdata, LPSS_GENERAL);
748 	if (val < 0) {
749 		if (ltr_mode & LPSS_GENERAL_LTR_MODE_SW) {
750 			ltr_mode &= ~LPSS_GENERAL_LTR_MODE_SW;
751 			__lpss_reg_write(ltr_mode, pdata, LPSS_GENERAL);
752 		}
753 		return;
754 	}
755 	ltr_val = __lpss_reg_read(pdata, LPSS_SW_LTR) & ~LPSS_LTR_SNOOP_MASK;
756 	if (val >= LPSS_LTR_SNOOP_LAT_CUTOFF) {
757 		ltr_val |= LPSS_LTR_SNOOP_LAT_32US;
758 		val = LPSS_LTR_MAX_VAL;
759 	} else if (val > LPSS_LTR_MAX_VAL) {
760 		ltr_val |= LPSS_LTR_SNOOP_LAT_32US | LPSS_LTR_SNOOP_REQ;
761 		val >>= LPSS_LTR_SNOOP_LAT_SHIFT;
762 	} else {
763 		ltr_val |= LPSS_LTR_SNOOP_LAT_1US | LPSS_LTR_SNOOP_REQ;
764 	}
765 	ltr_val |= val;
766 	__lpss_reg_write(ltr_val, pdata, LPSS_SW_LTR);
767 	if (!(ltr_mode & LPSS_GENERAL_LTR_MODE_SW)) {
768 		ltr_mode |= LPSS_GENERAL_LTR_MODE_SW;
769 		__lpss_reg_write(ltr_mode, pdata, LPSS_GENERAL);
770 	}
771 }
772 
773 #ifdef CONFIG_PM
774 /**
775  * acpi_lpss_save_ctx() - Save the private registers of LPSS device
776  * @dev: LPSS device
777  * @pdata: pointer to the private data of the LPSS device
778  *
779  * Most LPSS devices have private registers which may loose their context when
780  * the device is powered down. acpi_lpss_save_ctx() saves those registers into
781  * prv_reg_ctx array.
782  */
783 static void acpi_lpss_save_ctx(struct device *dev,
784 			       struct lpss_private_data *pdata)
785 {
786 	unsigned int i;
787 
788 	for (i = 0; i < LPSS_PRV_REG_COUNT; i++) {
789 		unsigned long offset = i * sizeof(u32);
790 
791 		pdata->prv_reg_ctx[i] = __lpss_reg_read(pdata, offset);
792 		dev_dbg(dev, "saving 0x%08x from LPSS reg at offset 0x%02lx\n",
793 			pdata->prv_reg_ctx[i], offset);
794 	}
795 }
796 
797 /**
798  * acpi_lpss_restore_ctx() - Restore the private registers of LPSS device
799  * @dev: LPSS device
800  * @pdata: pointer to the private data of the LPSS device
801  *
802  * Restores the registers that were previously stored with acpi_lpss_save_ctx().
803  */
804 static void acpi_lpss_restore_ctx(struct device *dev,
805 				  struct lpss_private_data *pdata)
806 {
807 	unsigned int i;
808 
809 	for (i = 0; i < LPSS_PRV_REG_COUNT; i++) {
810 		unsigned long offset = i * sizeof(u32);
811 
812 		__lpss_reg_write(pdata->prv_reg_ctx[i], pdata, offset);
813 		dev_dbg(dev, "restoring 0x%08x to LPSS reg at offset 0x%02lx\n",
814 			pdata->prv_reg_ctx[i], offset);
815 	}
816 }
817 
818 static void acpi_lpss_d3_to_d0_delay(struct lpss_private_data *pdata)
819 {
820 	/*
821 	 * The following delay is needed or the subsequent write operations may
822 	 * fail. The LPSS devices are actually PCI devices and the PCI spec
823 	 * expects 10ms delay before the device can be accessed after D3 to D0
824 	 * transition. However some platforms like BSW does not need this delay.
825 	 */
826 	unsigned int delay = 10;	/* default 10ms delay */
827 
828 	if (pdata->dev_desc->flags & LPSS_NO_D3_DELAY)
829 		delay = 0;
830 
831 	msleep(delay);
832 }
833 
834 static int acpi_lpss_activate(struct device *dev)
835 {
836 	struct lpss_private_data *pdata = acpi_driver_data(ACPI_COMPANION(dev));
837 	int ret;
838 
839 	ret = acpi_dev_resume(dev);
840 	if (ret)
841 		return ret;
842 
843 	acpi_lpss_d3_to_d0_delay(pdata);
844 
845 	/*
846 	 * This is called only on ->probe() stage where a device is either in
847 	 * known state defined by BIOS or most likely powered off. Due to this
848 	 * we have to deassert reset line to be sure that ->probe() will
849 	 * recognize the device.
850 	 */
851 	if (pdata->dev_desc->flags & LPSS_SAVE_CTX)
852 		lpss_deassert_reset(pdata);
853 
854 	return 0;
855 }
856 
857 static void acpi_lpss_dismiss(struct device *dev)
858 {
859 	acpi_dev_suspend(dev, false);
860 }
861 
862 /* IOSF SB for LPSS island */
863 #define LPSS_IOSF_UNIT_LPIOEP		0xA0
864 #define LPSS_IOSF_UNIT_LPIO1		0xAB
865 #define LPSS_IOSF_UNIT_LPIO2		0xAC
866 
867 #define LPSS_IOSF_PMCSR			0x84
868 #define LPSS_PMCSR_D0			0
869 #define LPSS_PMCSR_D3hot		3
870 #define LPSS_PMCSR_Dx_MASK		GENMASK(1, 0)
871 
872 #define LPSS_IOSF_GPIODEF0		0x154
873 #define LPSS_GPIODEF0_DMA1_D3		BIT(2)
874 #define LPSS_GPIODEF0_DMA2_D3		BIT(3)
875 #define LPSS_GPIODEF0_DMA_D3_MASK	GENMASK(3, 2)
876 #define LPSS_GPIODEF0_DMA_LLP		BIT(13)
877 
878 static DEFINE_MUTEX(lpss_iosf_mutex);
879 
880 static void lpss_iosf_enter_d3_state(void)
881 {
882 	u32 value1 = 0;
883 	u32 mask1 = LPSS_GPIODEF0_DMA_D3_MASK | LPSS_GPIODEF0_DMA_LLP;
884 	u32 value2 = LPSS_PMCSR_D3hot;
885 	u32 mask2 = LPSS_PMCSR_Dx_MASK;
886 	/*
887 	 * PMC provides an information about actual status of the LPSS devices.
888 	 * Here we read the values related to LPSS power island, i.e. LPSS
889 	 * devices, excluding both LPSS DMA controllers, along with SCC domain.
890 	 */
891 	u32 func_dis, d3_sts_0, pmc_status, pmc_mask = 0xfe000ffe;
892 	int ret;
893 
894 	ret = pmc_atom_read(PMC_FUNC_DIS, &func_dis);
895 	if (ret)
896 		return;
897 
898 	mutex_lock(&lpss_iosf_mutex);
899 
900 	ret = pmc_atom_read(PMC_D3_STS_0, &d3_sts_0);
901 	if (ret)
902 		goto exit;
903 
904 	/*
905 	 * Get the status of entire LPSS power island per device basis.
906 	 * Shutdown both LPSS DMA controllers if and only if all other devices
907 	 * are already in D3hot.
908 	 */
909 	pmc_status = (~(d3_sts_0 | func_dis)) & pmc_mask;
910 	if (pmc_status)
911 		goto exit;
912 
913 	iosf_mbi_modify(LPSS_IOSF_UNIT_LPIO1, MBI_CFG_WRITE,
914 			LPSS_IOSF_PMCSR, value2, mask2);
915 
916 	iosf_mbi_modify(LPSS_IOSF_UNIT_LPIO2, MBI_CFG_WRITE,
917 			LPSS_IOSF_PMCSR, value2, mask2);
918 
919 	iosf_mbi_modify(LPSS_IOSF_UNIT_LPIOEP, MBI_CR_WRITE,
920 			LPSS_IOSF_GPIODEF0, value1, mask1);
921 exit:
922 	mutex_unlock(&lpss_iosf_mutex);
923 }
924 
925 static void lpss_iosf_exit_d3_state(void)
926 {
927 	u32 value1 = LPSS_GPIODEF0_DMA1_D3 | LPSS_GPIODEF0_DMA2_D3 |
928 		     LPSS_GPIODEF0_DMA_LLP;
929 	u32 mask1 = LPSS_GPIODEF0_DMA_D3_MASK | LPSS_GPIODEF0_DMA_LLP;
930 	u32 value2 = LPSS_PMCSR_D0;
931 	u32 mask2 = LPSS_PMCSR_Dx_MASK;
932 
933 	mutex_lock(&lpss_iosf_mutex);
934 
935 	iosf_mbi_modify(LPSS_IOSF_UNIT_LPIOEP, MBI_CR_WRITE,
936 			LPSS_IOSF_GPIODEF0, value1, mask1);
937 
938 	iosf_mbi_modify(LPSS_IOSF_UNIT_LPIO2, MBI_CFG_WRITE,
939 			LPSS_IOSF_PMCSR, value2, mask2);
940 
941 	iosf_mbi_modify(LPSS_IOSF_UNIT_LPIO1, MBI_CFG_WRITE,
942 			LPSS_IOSF_PMCSR, value2, mask2);
943 
944 	mutex_unlock(&lpss_iosf_mutex);
945 }
946 
947 static int acpi_lpss_suspend(struct device *dev, bool wakeup)
948 {
949 	struct lpss_private_data *pdata = acpi_driver_data(ACPI_COMPANION(dev));
950 	int ret;
951 
952 	if (pdata->dev_desc->flags & LPSS_SAVE_CTX)
953 		acpi_lpss_save_ctx(dev, pdata);
954 
955 	ret = acpi_dev_suspend(dev, wakeup);
956 
957 	/*
958 	 * This call must be last in the sequence, otherwise PMC will return
959 	 * wrong status for devices being about to be powered off. See
960 	 * lpss_iosf_enter_d3_state() for further information.
961 	 */
962 	if (lpss_quirks & LPSS_QUIRK_ALWAYS_POWER_ON && iosf_mbi_available())
963 		lpss_iosf_enter_d3_state();
964 
965 	return ret;
966 }
967 
968 static int acpi_lpss_resume(struct device *dev)
969 {
970 	struct lpss_private_data *pdata = acpi_driver_data(ACPI_COMPANION(dev));
971 	int ret;
972 
973 	/*
974 	 * This call is kept first to be in symmetry with
975 	 * acpi_lpss_runtime_suspend() one.
976 	 */
977 	if (lpss_quirks & LPSS_QUIRK_ALWAYS_POWER_ON && iosf_mbi_available())
978 		lpss_iosf_exit_d3_state();
979 
980 	ret = acpi_dev_resume(dev);
981 	if (ret)
982 		return ret;
983 
984 	acpi_lpss_d3_to_d0_delay(pdata);
985 
986 	if (pdata->dev_desc->flags & LPSS_SAVE_CTX)
987 		acpi_lpss_restore_ctx(dev, pdata);
988 
989 	return 0;
990 }
991 
992 #ifdef CONFIG_PM_SLEEP
993 static int acpi_lpss_suspend_late(struct device *dev)
994 {
995 	int ret;
996 
997 	if (dev_pm_smart_suspend_and_suspended(dev))
998 		return 0;
999 
1000 	ret = pm_generic_suspend_late(dev);
1001 	return ret ? ret : acpi_lpss_suspend(dev, device_may_wakeup(dev));
1002 }
1003 
1004 static int acpi_lpss_resume_early(struct device *dev)
1005 {
1006 	int ret = acpi_lpss_resume(dev);
1007 
1008 	return ret ? ret : pm_generic_resume_early(dev);
1009 }
1010 #endif /* CONFIG_PM_SLEEP */
1011 
1012 static int acpi_lpss_runtime_suspend(struct device *dev)
1013 {
1014 	int ret = pm_generic_runtime_suspend(dev);
1015 
1016 	return ret ? ret : acpi_lpss_suspend(dev, true);
1017 }
1018 
1019 static int acpi_lpss_runtime_resume(struct device *dev)
1020 {
1021 	int ret = acpi_lpss_resume(dev);
1022 
1023 	return ret ? ret : pm_generic_runtime_resume(dev);
1024 }
1025 #endif /* CONFIG_PM */
1026 
1027 static struct dev_pm_domain acpi_lpss_pm_domain = {
1028 #ifdef CONFIG_PM
1029 	.activate = acpi_lpss_activate,
1030 	.dismiss = acpi_lpss_dismiss,
1031 #endif
1032 	.ops = {
1033 #ifdef CONFIG_PM
1034 #ifdef CONFIG_PM_SLEEP
1035 		.prepare = acpi_subsys_prepare,
1036 		.complete = acpi_subsys_complete,
1037 		.suspend = acpi_subsys_suspend,
1038 		.suspend_late = acpi_lpss_suspend_late,
1039 		.suspend_noirq = acpi_subsys_suspend_noirq,
1040 		.resume_noirq = acpi_subsys_resume_noirq,
1041 		.resume_early = acpi_lpss_resume_early,
1042 		.freeze = acpi_subsys_freeze,
1043 		.freeze_late = acpi_subsys_freeze_late,
1044 		.freeze_noirq = acpi_subsys_freeze_noirq,
1045 		.thaw_noirq = acpi_subsys_thaw_noirq,
1046 		.poweroff = acpi_subsys_suspend,
1047 		.poweroff_late = acpi_lpss_suspend_late,
1048 		.poweroff_noirq = acpi_subsys_suspend_noirq,
1049 		.restore_noirq = acpi_subsys_resume_noirq,
1050 		.restore_early = acpi_lpss_resume_early,
1051 #endif
1052 		.runtime_suspend = acpi_lpss_runtime_suspend,
1053 		.runtime_resume = acpi_lpss_runtime_resume,
1054 #endif
1055 	},
1056 };
1057 
1058 static int acpi_lpss_platform_notify(struct notifier_block *nb,
1059 				     unsigned long action, void *data)
1060 {
1061 	struct platform_device *pdev = to_platform_device(data);
1062 	struct lpss_private_data *pdata;
1063 	struct acpi_device *adev;
1064 	const struct acpi_device_id *id;
1065 
1066 	id = acpi_match_device(acpi_lpss_device_ids, &pdev->dev);
1067 	if (!id || !id->driver_data)
1068 		return 0;
1069 
1070 	if (acpi_bus_get_device(ACPI_HANDLE(&pdev->dev), &adev))
1071 		return 0;
1072 
1073 	pdata = acpi_driver_data(adev);
1074 	if (!pdata)
1075 		return 0;
1076 
1077 	if (pdata->mmio_base &&
1078 	    pdata->mmio_size < pdata->dev_desc->prv_offset + LPSS_LTR_SIZE) {
1079 		dev_err(&pdev->dev, "MMIO size insufficient to access LTR\n");
1080 		return 0;
1081 	}
1082 
1083 	switch (action) {
1084 	case BUS_NOTIFY_BIND_DRIVER:
1085 		dev_pm_domain_set(&pdev->dev, &acpi_lpss_pm_domain);
1086 		break;
1087 	case BUS_NOTIFY_DRIVER_NOT_BOUND:
1088 	case BUS_NOTIFY_UNBOUND_DRIVER:
1089 		dev_pm_domain_set(&pdev->dev, NULL);
1090 		break;
1091 	case BUS_NOTIFY_ADD_DEVICE:
1092 		dev_pm_domain_set(&pdev->dev, &acpi_lpss_pm_domain);
1093 		if (pdata->dev_desc->flags & LPSS_LTR)
1094 			return sysfs_create_group(&pdev->dev.kobj,
1095 						  &lpss_attr_group);
1096 		break;
1097 	case BUS_NOTIFY_DEL_DEVICE:
1098 		if (pdata->dev_desc->flags & LPSS_LTR)
1099 			sysfs_remove_group(&pdev->dev.kobj, &lpss_attr_group);
1100 		dev_pm_domain_set(&pdev->dev, NULL);
1101 		break;
1102 	default:
1103 		break;
1104 	}
1105 
1106 	return 0;
1107 }
1108 
1109 static struct notifier_block acpi_lpss_nb = {
1110 	.notifier_call = acpi_lpss_platform_notify,
1111 };
1112 
1113 static void acpi_lpss_bind(struct device *dev)
1114 {
1115 	struct lpss_private_data *pdata = acpi_driver_data(ACPI_COMPANION(dev));
1116 
1117 	if (!pdata || !pdata->mmio_base || !(pdata->dev_desc->flags & LPSS_LTR))
1118 		return;
1119 
1120 	if (pdata->mmio_size >= pdata->dev_desc->prv_offset + LPSS_LTR_SIZE)
1121 		dev->power.set_latency_tolerance = acpi_lpss_set_ltr;
1122 	else
1123 		dev_err(dev, "MMIO size insufficient to access LTR\n");
1124 }
1125 
1126 static void acpi_lpss_unbind(struct device *dev)
1127 {
1128 	dev->power.set_latency_tolerance = NULL;
1129 }
1130 
1131 static struct acpi_scan_handler lpss_handler = {
1132 	.ids = acpi_lpss_device_ids,
1133 	.attach = acpi_lpss_create_device,
1134 	.bind = acpi_lpss_bind,
1135 	.unbind = acpi_lpss_unbind,
1136 };
1137 
1138 void __init acpi_lpss_init(void)
1139 {
1140 	const struct x86_cpu_id *id;
1141 	int ret;
1142 
1143 	ret = lpt_clk_init();
1144 	if (ret)
1145 		return;
1146 
1147 	id = x86_match_cpu(lpss_cpu_ids);
1148 	if (id)
1149 		lpss_quirks |= LPSS_QUIRK_ALWAYS_POWER_ON;
1150 
1151 	bus_register_notifier(&platform_bus_type, &acpi_lpss_nb);
1152 	acpi_scan_add_handler(&lpss_handler);
1153 }
1154 
1155 #else
1156 
1157 static struct acpi_scan_handler lpss_handler = {
1158 	.ids = acpi_lpss_device_ids,
1159 };
1160 
1161 void __init acpi_lpss_init(void)
1162 {
1163 	acpi_scan_add_handler(&lpss_handler);
1164 }
1165 
1166 #endif /* CONFIG_X86_INTEL_LPSS */
1167