xref: /openbmc/linux/drivers/Makefile (revision afb46f79)
1#
2# Makefile for the Linux kernel device drivers.
3#
4# 15 Sep 2000, Christoph Hellwig <hch@infradead.org>
5# Rewritten to use lists instead of if-statements.
6#
7
8obj-y				+= irqchip/
9obj-y				+= bus/
10
11obj-$(CONFIG_GENERIC_PHY)	+= phy/
12
13# GPIO must come after pinctrl as gpios may need to mux pins etc
14obj-y				+= pinctrl/
15obj-y				+= gpio/
16obj-y				+= pwm/
17obj-$(CONFIG_PCI)		+= pci/
18obj-$(CONFIG_PARISC)		+= parisc/
19obj-$(CONFIG_RAPIDIO)		+= rapidio/
20obj-y				+= video/
21obj-y				+= idle/
22
23# IPMI must come before ACPI in order to provide IPMI opregion support
24obj-$(CONFIG_IPMI_HANDLER)	+= char/ipmi/
25
26obj-$(CONFIG_ACPI)		+= acpi/
27obj-$(CONFIG_SFI)		+= sfi/
28# PnP must come after ACPI since it will eventually need to check if acpi
29# was used and do nothing if so
30obj-$(CONFIG_PNP)		+= pnp/
31obj-y				+= amba/
32# Many drivers will want to use DMA so this has to be made available
33# really early.
34obj-$(CONFIG_DMADEVICES)	+= dma/
35
36obj-$(CONFIG_VIRTIO)		+= virtio/
37obj-$(CONFIG_XEN)		+= xen/
38
39# regulators early, since some subsystems rely on them to initialize
40obj-$(CONFIG_REGULATOR)		+= regulator/
41
42# reset controllers early, since gpu drivers might rely on them to initialize
43obj-$(CONFIG_RESET_CONTROLLER)	+= reset/
44
45# tty/ comes before char/ so that the VT console is the boot-time
46# default.
47obj-y				+= tty/
48obj-y				+= char/
49
50# gpu/ comes after char for AGP vs DRM startup
51obj-y				+= gpu/
52
53obj-$(CONFIG_CONNECTOR)		+= connector/
54
55# i810fb and intelfb depend on char/agp/
56obj-$(CONFIG_FB_I810)           += video/fbdev/i810/
57obj-$(CONFIG_FB_INTEL)          += video/fbdev/intelfb/
58
59obj-$(CONFIG_PARPORT)		+= parport/
60obj-y				+= base/ block/ misc/ mfd/ nfc/
61obj-$(CONFIG_NUBUS)		+= nubus/
62obj-y				+= macintosh/
63obj-$(CONFIG_IDE)		+= ide/
64obj-$(CONFIG_SCSI)		+= scsi/
65obj-$(CONFIG_ATA)		+= ata/
66obj-$(CONFIG_TARGET_CORE)	+= target/
67obj-$(CONFIG_MTD)		+= mtd/
68obj-$(CONFIG_SPI)		+= spi/
69obj-$(CONFIG_SPMI)		+= spmi/
70obj-y				+= hsi/
71obj-y				+= net/
72obj-$(CONFIG_ATM)		+= atm/
73obj-$(CONFIG_FUSION)		+= message/
74obj-y				+= firewire/
75obj-$(CONFIG_UIO)		+= uio/
76obj-$(CONFIG_VFIO)		+= vfio/
77obj-y				+= cdrom/
78obj-y				+= auxdisplay/
79obj-$(CONFIG_PCCARD)		+= pcmcia/
80obj-$(CONFIG_DIO)		+= dio/
81obj-$(CONFIG_SBUS)		+= sbus/
82obj-$(CONFIG_ZORRO)		+= zorro/
83obj-$(CONFIG_MAC)		+= macintosh/
84obj-$(CONFIG_ATA_OVER_ETH)	+= block/aoe/
85obj-$(CONFIG_PARIDE) 		+= block/paride/
86obj-$(CONFIG_TC)		+= tc/
87obj-$(CONFIG_UWB)		+= uwb/
88obj-$(CONFIG_USB_PHY)		+= usb/
89obj-$(CONFIG_USB)		+= usb/
90obj-$(CONFIG_PCI)		+= usb/
91obj-$(CONFIG_USB_GADGET)	+= usb/
92obj-$(CONFIG_SERIO)		+= input/serio/
93obj-$(CONFIG_GAMEPORT)		+= input/gameport/
94obj-$(CONFIG_INPUT)		+= input/
95obj-$(CONFIG_I2O)		+= message/
96obj-$(CONFIG_RTC_LIB)		+= rtc/
97obj-y				+= i2c/ media/
98obj-$(CONFIG_PPS)		+= pps/
99obj-$(CONFIG_PTP_1588_CLOCK)	+= ptp/
100obj-$(CONFIG_W1)		+= w1/
101obj-$(CONFIG_POWER_SUPPLY)	+= power/
102obj-$(CONFIG_HWMON)		+= hwmon/
103obj-$(CONFIG_THERMAL)		+= thermal/
104obj-$(CONFIG_WATCHDOG)		+= watchdog/
105obj-$(CONFIG_MD)		+= md/
106obj-$(CONFIG_BT)		+= bluetooth/
107obj-$(CONFIG_ACCESSIBILITY)	+= accessibility/
108obj-$(CONFIG_ISDN)		+= isdn/
109obj-$(CONFIG_EDAC)		+= edac/
110obj-$(CONFIG_EISA)		+= eisa/
111obj-y				+= lguest/
112obj-$(CONFIG_CPU_FREQ)		+= cpufreq/
113obj-$(CONFIG_CPU_IDLE)		+= cpuidle/
114obj-y				+= mmc/
115obj-$(CONFIG_MEMSTICK)		+= memstick/
116obj-y				+= leds/
117obj-$(CONFIG_INFINIBAND)	+= infiniband/
118obj-$(CONFIG_SGI_SN)		+= sn/
119obj-y				+= firmware/
120obj-$(CONFIG_CRYPTO)		+= crypto/
121obj-$(CONFIG_SUPERH)		+= sh/
122obj-$(CONFIG_ARCH_SHMOBILE_LEGACY)	+= sh/
123ifndef CONFIG_ARCH_USES_GETTIMEOFFSET
124obj-y				+= clocksource/
125endif
126obj-$(CONFIG_DCA)		+= dca/
127obj-$(CONFIG_HID)		+= hid/
128obj-$(CONFIG_PPC_PS3)		+= ps3/
129obj-$(CONFIG_OF)		+= of/
130obj-$(CONFIG_SSB)		+= ssb/
131obj-$(CONFIG_BCMA)		+= bcma/
132obj-$(CONFIG_VHOST_RING)	+= vhost/
133obj-$(CONFIG_VLYNQ)		+= vlynq/
134obj-$(CONFIG_STAGING)		+= staging/
135obj-y				+= platform/
136#common clk code
137obj-y				+= clk/
138
139obj-$(CONFIG_MAILBOX)		+= mailbox/
140obj-$(CONFIG_HWSPINLOCK)	+= hwspinlock/
141obj-$(CONFIG_NFC)		+= nfc/
142obj-$(CONFIG_IOMMU_SUPPORT)	+= iommu/
143obj-$(CONFIG_REMOTEPROC)	+= remoteproc/
144obj-$(CONFIG_RPMSG)		+= rpmsg/
145
146# Virtualization drivers
147obj-$(CONFIG_VIRT_DRIVERS)	+= virt/
148obj-$(CONFIG_HYPERV)		+= hv/
149
150obj-$(CONFIG_PM_DEVFREQ)	+= devfreq/
151obj-$(CONFIG_EXTCON)		+= extcon/
152obj-$(CONFIG_MEMORY)		+= memory/
153obj-$(CONFIG_IIO)		+= iio/
154obj-$(CONFIG_VME_BUS)		+= vme/
155obj-$(CONFIG_IPACK_BUS)		+= ipack/
156obj-$(CONFIG_NTB)		+= ntb/
157obj-$(CONFIG_FMC)		+= fmc/
158obj-$(CONFIG_POWERCAP)		+= powercap/
159obj-$(CONFIG_MCB)		+= mcb/
160