1 /* 2 * This header file describes this specific Xtensa processor's TIE extensions 3 * that extend basic Xtensa core functionality. It is customized to this 4 * Xtensa processor configuration. 5 * 6 * This file is subject to the terms and conditions of version 2.1 of the GNU 7 * Lesser General Public License as published by the Free Software Foundation. 8 * 9 * Copyright (C) 1999-2009 Tensilica Inc. 10 */ 11 12 #ifndef _XTENSA_CORE_TIE_H 13 #define _XTENSA_CORE_TIE_H 14 15 #define XCHAL_CP_NUM 1 /* number of coprocessors */ 16 #define XCHAL_CP_MAX 2 /* max CP ID + 1 (0 if none) */ 17 #define XCHAL_CP_MASK 0x02 /* bitmask of all CPs by ID */ 18 #define XCHAL_CP_PORT_MASK 0x00 /* bitmask of only port CPs */ 19 20 /* Basic parameters of each coprocessor: */ 21 #define XCHAL_CP1_NAME "AudioEngineLX" 22 #define XCHAL_CP1_IDENT AudioEngineLX 23 #define XCHAL_CP1_SA_SIZE 112 /* size of state save area */ 24 #define XCHAL_CP1_SA_ALIGN 8 /* min alignment of save area */ 25 #define XCHAL_CP_ID_AUDIOENGINELX 1 /* coprocessor ID (0..7) */ 26 27 /* Filler info for unassigned coprocessors, to simplify arrays etc: */ 28 #define XCHAL_CP0_SA_SIZE 0 29 #define XCHAL_CP0_SA_ALIGN 1 30 #define XCHAL_CP2_SA_SIZE 0 31 #define XCHAL_CP2_SA_ALIGN 1 32 #define XCHAL_CP3_SA_SIZE 0 33 #define XCHAL_CP3_SA_ALIGN 1 34 #define XCHAL_CP4_SA_SIZE 0 35 #define XCHAL_CP4_SA_ALIGN 1 36 #define XCHAL_CP5_SA_SIZE 0 37 #define XCHAL_CP5_SA_ALIGN 1 38 #define XCHAL_CP6_SA_SIZE 0 39 #define XCHAL_CP6_SA_ALIGN 1 40 #define XCHAL_CP7_SA_SIZE 0 41 #define XCHAL_CP7_SA_ALIGN 1 42 43 /* Save area for non-coprocessor optional and custom (TIE) state: */ 44 #define XCHAL_NCP_SA_SIZE 12 45 #define XCHAL_NCP_SA_ALIGN 4 46 47 /* Total save area for optional and custom state (NCP + CPn): */ 48 #define XCHAL_TOTAL_SA_SIZE 128 /* with 16-byte align padding */ 49 #define XCHAL_TOTAL_SA_ALIGN 8 /* actual minimum alignment */ 50 51 /* 52 * Detailed contents of save areas. 53 * NOTE: caller must define the XCHAL_SA_REG macro (not defined here) 54 * before expanding the XCHAL_xxx_SA_LIST() macros. 55 * 56 * XCHAL_SA_REG(s,ccused,abikind,kind,opt,name,galign,align,asize, 57 * dbnum,base,regnum,bitsz,gapsz,reset,x...) 58 * 59 * s = passed from XCHAL_*_LIST(s), eg. to select how to expand 60 * ccused = set if used by compiler without special options or code 61 * abikind = 0 (caller-saved), 1 (callee-saved), or 2 (thread-global) 62 * kind = 0 (special reg), 1 (TIE user reg), or 2 (TIE regfile reg) 63 * opt = 0 (custom TIE extension or coprocessor), or 1 (optional reg) 64 * name = lowercase reg name (no quotes) 65 * galign = group byte alignment (power of 2) (galign >= align) 66 * align = register byte alignment (power of 2) 67 * asize = allocated size in bytes (asize*8 == bitsz + gapsz + padsz) 68 * (not including any pad bytes required to galign this or next reg) 69 * dbnum = unique target number f/debug (see <xtensa-libdb-macros.h>) 70 * base = reg shortname w/o index (or sr=special, ur=TIE user reg) 71 * regnum = reg index in regfile, or special/TIE-user reg number 72 * bitsz = number of significant bits (regfile width, or ur/sr mask bits) 73 * gapsz = intervening bits, if bitsz bits not stored contiguously 74 * (padsz = pad bits at end [TIE regfile] or at msbits [ur,sr] of asize) 75 * reset = register reset value (or 0 if undefined at reset) 76 * x = reserved for future use (0 until then) 77 * 78 * To filter out certain registers, e.g. to expand only the non-global 79 * registers used by the compiler, you can do something like this: 80 * 81 * #define XCHAL_SA_REG(s,ccused,p...) SELCC##ccused(p) 82 * #define SELCC0(p...) 83 * #define SELCC1(abikind,p...) SELAK##abikind(p) 84 * #define SELAK0(p...) REG(p) 85 * #define SELAK1(p...) REG(p) 86 * #define SELAK2(p...) 87 * #define REG(kind,tie,name,galn,aln,asz,csz,dbnum,base,rnum,bsz,rst,x...) \ 88 * ...what you want to expand... 89 */ 90 91 #define XCHAL_NCP_SA_NUM 3 92 #define XCHAL_NCP_SA_LIST(s) \ 93 XCHAL_SA_REG(s,0,0,0,1, br, 4, 4, 4,0x0204, sr,4 , 16,0,0,0) \ 94 XCHAL_SA_REG(s,0,0,0,1, scompare1, 4, 4, 4,0x020C, sr,12 , 32,0,0,0) \ 95 XCHAL_SA_REG(s,1,2,1,1, threadptr, 4, 4, 4,0x03E7, ur,231, 32,0,0,0) 96 97 #define XCHAL_CP0_SA_NUM 0 98 #define XCHAL_CP0_SA_LIST(s) /* empty */ 99 100 #define XCHAL_CP1_SA_NUM 16 101 #define XCHAL_CP1_SA_LIST(s) \ 102 XCHAL_SA_REG(s,0,0,1,0, ae_ovf_sar, 8, 4, 4,0x03F0, ur,240, 7,0,0,0) \ 103 XCHAL_SA_REG(s,0,0,1,0, ae_bithead, 4, 4, 4,0x03F1, ur,241, 32,0,0,0) \ 104 XCHAL_SA_REG(s,0,0,1,0,ae_ts_fts_bu_bp, 4, 4, 4,0x03F2, ur,242, 16,0,0,0) \ 105 XCHAL_SA_REG(s,0,0,1,0, ae_sd_no, 4, 4, 4,0x03F3, ur,243, 28,0,0,0) \ 106 XCHAL_SA_REG(s,0,0,2,0, aep0, 8, 8, 8,0x0060, aep,0 , 48,0,0,0) \ 107 XCHAL_SA_REG(s,0,0,2,0, aep1, 8, 8, 8,0x0061, aep,1 , 48,0,0,0) \ 108 XCHAL_SA_REG(s,0,0,2,0, aep2, 8, 8, 8,0x0062, aep,2 , 48,0,0,0) \ 109 XCHAL_SA_REG(s,0,0,2,0, aep3, 8, 8, 8,0x0063, aep,3 , 48,0,0,0) \ 110 XCHAL_SA_REG(s,0,0,2,0, aep4, 8, 8, 8,0x0064, aep,4 , 48,0,0,0) \ 111 XCHAL_SA_REG(s,0,0,2,0, aep5, 8, 8, 8,0x0065, aep,5 , 48,0,0,0) \ 112 XCHAL_SA_REG(s,0,0,2,0, aep6, 8, 8, 8,0x0066, aep,6 , 48,0,0,0) \ 113 XCHAL_SA_REG(s,0,0,2,0, aep7, 8, 8, 8,0x0067, aep,7 , 48,0,0,0) \ 114 XCHAL_SA_REG(s,0,0,2,0, aeq0, 8, 8, 8,0x0068, aeq,0 , 56,0,0,0) \ 115 XCHAL_SA_REG(s,0,0,2,0, aeq1, 8, 8, 8,0x0069, aeq,1 , 56,0,0,0) \ 116 XCHAL_SA_REG(s,0,0,2,0, aeq2, 8, 8, 8,0x006A, aeq,2 , 56,0,0,0) \ 117 XCHAL_SA_REG(s,0,0,2,0, aeq3, 8, 8, 8,0x006B, aeq,3 , 56,0,0,0) 118 119 #define XCHAL_CP2_SA_NUM 0 120 #define XCHAL_CP2_SA_LIST(s) /* empty */ 121 122 #define XCHAL_CP3_SA_NUM 0 123 #define XCHAL_CP3_SA_LIST(s) /* empty */ 124 125 #define XCHAL_CP4_SA_NUM 0 126 #define XCHAL_CP4_SA_LIST(s) /* empty */ 127 128 #define XCHAL_CP5_SA_NUM 0 129 #define XCHAL_CP5_SA_LIST(s) /* empty */ 130 131 #define XCHAL_CP6_SA_NUM 0 132 #define XCHAL_CP6_SA_LIST(s) /* empty */ 133 134 #define XCHAL_CP7_SA_NUM 0 135 #define XCHAL_CP7_SA_LIST(s) /* empty */ 136 137 /* Byte length of instruction from its first nibble (op0 field), per FLIX. */ 138 #define XCHAL_OP0_FORMAT_LENGTHS 3,3,3,3,3,3,3,3,2,2,2,2,2,2,3,8 139 140 #endif /*_XTENSA_CORE_TIE_H*/ 141