1 /*
2  * arch/xtensa/platforms/xt2000/setup.c
3  *
4  * Platform specific functions for the XT2000 board.
5  *
6  * Authors:	Chris Zankel <chris@zankel.net>
7  *		Joe Taylor <joe@tensilica.com>
8  *
9  * Copyright 2001 - 2004 Tensilica Inc.
10  *
11  * This program is free software; you can redistribute  it and/or modify it
12  * under  the terms of  the GNU General  Public License as published by the
13  * Free Software Foundation;  either version 2 of the  License, or (at your
14  * option) any later version.
15  *
16  */
17 #include <linux/stddef.h>
18 #include <linux/kernel.h>
19 #include <linux/init.h>
20 #include <linux/errno.h>
21 #include <linux/reboot.h>
22 #include <linux/kdev_t.h>
23 #include <linux/types.h>
24 #include <linux/major.h>
25 #include <linux/console.h>
26 #include <linux/delay.h>
27 #include <linux/stringify.h>
28 #include <linux/platform_device.h>
29 #include <linux/serial.h>
30 #include <linux/serial_8250.h>
31 
32 #include <asm/processor.h>
33 #include <asm/platform.h>
34 #include <asm/bootparam.h>
35 #include <platform/hardware.h>
36 #include <platform/serial.h>
37 
38 /* Assumes s points to an 8-chr string.  No checking for NULL. */
39 
40 static void led_print (int f, char *s)
41 {
42 	unsigned long* led_addr = (unsigned long*) (XT2000_LED_ADDR + 0xE0) + f;
43 	int i;
44 	for (i = f; i < 8; i++)
45 		if ((*led_addr++ = *s++) == 0)
46 		    break;
47 }
48 
49 void platform_halt(void)
50 {
51 	led_print (0, "  HALT  ");
52 	local_irq_disable();
53 	while (1);
54 }
55 
56 void platform_power_off(void)
57 {
58 	led_print (0, "POWEROFF");
59 	local_irq_disable();
60 	while (1);
61 }
62 
63 void platform_restart(void)
64 {
65 	/* Flush and reset the mmu, simulate a processor reset, and
66 	 * jump to the reset vector. */
67 	cpu_reset();
68 	/* control never gets here */
69 }
70 
71 void __init platform_setup(char** cmdline)
72 {
73 	led_print (0, "LINUX   ");
74 }
75 
76 /* early initialization */
77 
78 void __init platform_init(bp_tag_t *first)
79 {
80 }
81 
82 /* Heartbeat. Let the LED blink. */
83 
84 void platform_heartbeat(void)
85 {
86 	static int i=0, t = 0;
87 
88 	if (--t < 0)
89 	{
90 		t = 59;
91 		led_print(7, i ? ".": " ");
92 		i ^= 1;
93 	}
94 }
95 
96 //#define RS_TABLE_SIZE 2
97 
98 #define _SERIAL_PORT(_base,_irq)					\
99 {									\
100 	.mapbase	= (_base),					\
101 	.membase	= (void*)(_base),				\
102 	.irq		= (_irq),					\
103 	.uartclk	= DUART16552_XTAL_FREQ,				\
104 	.iotype		= UPIO_MEM,					\
105 	.flags		= UPF_BOOT_AUTOCONF,				\
106 	.regshift	= 2,						\
107 }
108 
109 static struct plat_serial8250_port xt2000_serial_data[] = {
110 #if XCHAL_HAVE_BE
111 	_SERIAL_PORT(DUART16552_1_ADDR + 3, DUART16552_1_INTNUM),
112 	_SERIAL_PORT(DUART16552_2_ADDR + 3, DUART16552_2_INTNUM),
113 #else
114 	_SERIAL_PORT(DUART16552_1_ADDR, DUART16552_1_INTNUM),
115 	_SERIAL_PORT(DUART16552_2_ADDR, DUART16552_2_INTNUM),
116 #endif
117 	{ }
118 };
119 
120 static struct platform_device xt2000_serial8250_device = {
121 	.name		= "serial8250",
122 	.id		= PLAT8250_DEV_PLATFORM,
123 	.dev		= {
124 	    .platform_data = xt2000_serial_data,
125 	},
126 };
127 
128 static struct resource xt2000_sonic_res[] = {
129 	{
130 		.start = SONIC83934_ADDR,
131 		.end   = SONIC83934_ADDR + 0xff,
132 		.flags = IORESOURCE_MEM,
133 	},
134 	{
135 		.start = SONIC83934_INTNUM,
136 		.end = SONIC83934_INTNUM,
137 		.flags = IORESOURCE_IRQ,
138 	},
139 };
140 
141 static struct platform_device xt2000_sonic_device = {
142 	.name		= "xtsonic",
143 	.num_resources	= ARRAY_SIZE(xt2000_sonic_res),
144 	.resource		= xt2000_sonic_res,
145 };
146 
147 static int __init xt2000_setup_devinit(void)
148 {
149 	platform_device_register(&xt2000_serial8250_device);
150 	platform_device_register(&xt2000_sonic_device);
151 
152 	return 0;
153 }
154 
155 device_initcall(xt2000_setup_devinit);
156