xref: /openbmc/linux/arch/xtensa/kernel/setup.c (revision bbaf1ff0) 
1 /*
2  * arch/xtensa/kernel/setup.c
3  *
4  * This file is subject to the terms and conditions of the GNU General Public
5  * License.  See the file "COPYING" in the main directory of this archive
6  * for more details.
7  *
8  * Copyright (C) 1995  Linus Torvalds
9  * Copyright (C) 2001 - 2005  Tensilica Inc.
10  * Copyright (C) 2014 - 2016  Cadence Design Systems Inc.
11  *
12  * Chris Zankel	<chris@zankel.net>
13  * Joe Taylor	<joe@tensilica.com, joetylr@yahoo.com>
14  * Kevin Chea
15  * Marc Gauthier<marc@tensilica.com> <marc@alumni.uwaterloo.ca>
16  */
17 
18 #include <linux/errno.h>
19 #include <linux/init.h>
20 #include <linux/mm.h>
21 #include <linux/proc_fs.h>
22 #include <linux/screen_info.h>
23 #include <linux/kernel.h>
24 #include <linux/percpu.h>
25 #include <linux/reboot.h>
26 #include <linux/cpu.h>
27 #include <linux/of.h>
28 #include <linux/of_fdt.h>
29 
30 #if defined(CONFIG_VGA_CONSOLE) || defined(CONFIG_DUMMY_CONSOLE)
31 # include <linux/console.h>
32 #endif
33 
34 #ifdef CONFIG_PROC_FS
35 # include <linux/seq_file.h>
36 #endif
37 
38 #include <asm/bootparam.h>
39 #include <asm/kasan.h>
40 #include <asm/mmu_context.h>
41 #include <asm/page.h>
42 #include <asm/param.h>
43 #include <asm/platform.h>
44 #include <asm/processor.h>
45 #include <asm/sections.h>
46 #include <asm/setup.h>
47 #include <asm/smp.h>
48 #include <asm/sysmem.h>
49 #include <asm/timex.h>
50 #include <asm/traps.h>
51 
52 #if defined(CONFIG_VGA_CONSOLE) || defined(CONFIG_DUMMY_CONSOLE)
53 struct screen_info screen_info = {
54 	.orig_x = 0,
55 	.orig_y = 24,
56 	.orig_video_cols = 80,
57 	.orig_video_lines = 24,
58 	.orig_video_isVGA = 1,
59 	.orig_video_points = 16,
60 };
61 #endif
62 
63 #ifdef CONFIG_BLK_DEV_INITRD
64 extern unsigned long initrd_start;
65 extern unsigned long initrd_end;
66 extern int initrd_below_start_ok;
67 #endif
68 
69 #ifdef CONFIG_USE_OF
70 void *dtb_start = __dtb_start;
71 #endif
72 
73 extern unsigned long loops_per_jiffy;
74 
75 /* Command line specified as configuration option. */
76 
77 static char __initdata command_line[COMMAND_LINE_SIZE];
78 
79 #ifdef CONFIG_CMDLINE_BOOL
80 static char default_command_line[COMMAND_LINE_SIZE] __initdata = CONFIG_CMDLINE;
81 #endif
82 
83 #ifdef CONFIG_PARSE_BOOTPARAM
84 /*
85  * Boot parameter parsing.
86  *
87  * The Xtensa port uses a list of variable-sized tags to pass data to
88  * the kernel. The first tag must be a BP_TAG_FIRST tag for the list
89  * to be recognised. The list is terminated with a zero-sized
90  * BP_TAG_LAST tag.
91  */
92 
93 typedef struct tagtable {
94 	u32 tag;
95 	int (*parse)(const bp_tag_t*);
96 } tagtable_t;
97 
98 #define __tagtable(tag, fn) static tagtable_t __tagtable_##fn 		\
99 	__section(".taglist") __attribute__((used)) = { tag, fn }
100 
101 /* parse current tag */
102 
103 static int __init parse_tag_mem(const bp_tag_t *tag)
104 {
105 	struct bp_meminfo *mi = (struct bp_meminfo *)(tag->data);
106 
107 	if (mi->type != MEMORY_TYPE_CONVENTIONAL)
108 		return -1;
109 
110 	return memblock_add(mi->start, mi->end - mi->start);
111 }
112 
113 __tagtable(BP_TAG_MEMORY, parse_tag_mem);
114 
115 #ifdef CONFIG_BLK_DEV_INITRD
116 
117 static int __init parse_tag_initrd(const bp_tag_t* tag)
118 {
119 	struct bp_meminfo *mi = (struct bp_meminfo *)(tag->data);
120 
121 	initrd_start = (unsigned long)__va(mi->start);
122 	initrd_end = (unsigned long)__va(mi->end);
123 
124 	return 0;
125 }
126 
127 __tagtable(BP_TAG_INITRD, parse_tag_initrd);
128 
129 #endif /* CONFIG_BLK_DEV_INITRD */
130 
131 #ifdef CONFIG_USE_OF
132 
133 static int __init parse_tag_fdt(const bp_tag_t *tag)
134 {
135 	dtb_start = __va(tag->data[0]);
136 	return 0;
137 }
138 
139 __tagtable(BP_TAG_FDT, parse_tag_fdt);
140 
141 #endif /* CONFIG_USE_OF */
142 
143 static int __init parse_tag_cmdline(const bp_tag_t* tag)
144 {
145 	strscpy(command_line, (char *)(tag->data), COMMAND_LINE_SIZE);
146 	return 0;
147 }
148 
149 __tagtable(BP_TAG_COMMAND_LINE, parse_tag_cmdline);
150 
151 static int __init parse_bootparam(const bp_tag_t* tag)
152 {
153 	extern tagtable_t __tagtable_begin, __tagtable_end;
154 	tagtable_t *t;
155 
156 	/* Boot parameters must start with a BP_TAG_FIRST tag. */
157 
158 	if (tag->id != BP_TAG_FIRST) {
159 		pr_warn("Invalid boot parameters!\n");
160 		return 0;
161 	}
162 
163 	tag = (bp_tag_t*)((unsigned long)tag + sizeof(bp_tag_t) + tag->size);
164 
165 	/* Parse all tags. */
166 
167 	while (tag != NULL && tag->id != BP_TAG_LAST) {
168 		for (t = &__tagtable_begin; t < &__tagtable_end; t++) {
169 			if (tag->id == t->tag) {
170 				t->parse(tag);
171 				break;
172 			}
173 		}
174 		if (t == &__tagtable_end)
175 			pr_warn("Ignoring tag 0x%08x\n", tag->id);
176 		tag = (bp_tag_t*)((unsigned long)(tag + 1) + tag->size);
177 	}
178 
179 	return 0;
180 }
181 #else
182 static int __init parse_bootparam(const bp_tag_t *tag)
183 {
184 	pr_info("Ignoring boot parameters at %p\n", tag);
185 	return 0;
186 }
187 #endif
188 
189 #ifdef CONFIG_USE_OF
190 
191 #if !XCHAL_HAVE_PTP_MMU || XCHAL_HAVE_SPANNING_WAY
192 unsigned long xtensa_kio_paddr = XCHAL_KIO_DEFAULT_PADDR;
193 EXPORT_SYMBOL(xtensa_kio_paddr);
194 
195 static int __init xtensa_dt_io_area(unsigned long node, const char *uname,
196 		int depth, void *data)
197 {
198 	const __be32 *ranges;
199 	int len;
200 
201 	if (depth > 1)
202 		return 0;
203 
204 	if (!of_flat_dt_is_compatible(node, "simple-bus"))
205 		return 0;
206 
207 	ranges = of_get_flat_dt_prop(node, "ranges", &len);
208 	if (!ranges)
209 		return 1;
210 	if (len == 0)
211 		return 1;
212 
213 	xtensa_kio_paddr = of_read_ulong(ranges+1, 1);
214 	/* round down to nearest 256MB boundary */
215 	xtensa_kio_paddr &= 0xf0000000;
216 
217 	init_kio();
218 
219 	return 1;
220 }
221 #else
222 static int __init xtensa_dt_io_area(unsigned long node, const char *uname,
223 		int depth, void *data)
224 {
225 	return 1;
226 }
227 #endif
228 
229 void __init early_init_devtree(void *params)
230 {
231 	early_init_dt_scan(params);
232 	of_scan_flat_dt(xtensa_dt_io_area, NULL);
233 
234 	if (!command_line[0])
235 		strscpy(command_line, boot_command_line, COMMAND_LINE_SIZE);
236 }
237 
238 #endif /* CONFIG_USE_OF */
239 
240 /*
241  * Initialize architecture. (Early stage)
242  */
243 
244 void __init init_arch(bp_tag_t *bp_start)
245 {
246 	/* Initialize basic exception handling if configuration may need it */
247 
248 	if (IS_ENABLED(CONFIG_KASAN) ||
249 	    IS_ENABLED(CONFIG_XTENSA_LOAD_STORE))
250 		early_trap_init();
251 
252 	/* Initialize MMU. */
253 
254 	init_mmu();
255 
256 	/* Initialize initial KASAN shadow map */
257 
258 	kasan_early_init();
259 
260 	/* Parse boot parameters */
261 
262 	if (bp_start)
263 		parse_bootparam(bp_start);
264 
265 #ifdef CONFIG_USE_OF
266 	early_init_devtree(dtb_start);
267 #endif
268 
269 #ifdef CONFIG_CMDLINE_BOOL
270 	if (!command_line[0])
271 		strscpy(command_line, default_command_line, COMMAND_LINE_SIZE);
272 #endif
273 
274 	/* Early hook for platforms */
275 
276 	platform_init(bp_start);
277 }
278 
279 /*
280  * Initialize system. Setup memory and reserve regions.
281  */
282 
283 static inline int __init_memblock mem_reserve(unsigned long start,
284 					      unsigned long end)
285 {
286 	return memblock_reserve(start, end - start);
287 }
288 
289 void __init setup_arch(char **cmdline_p)
290 {
291 	pr_info("config ID: %08x:%08x\n",
292 		xtensa_get_sr(SREG_EPC), xtensa_get_sr(SREG_EXCSAVE));
293 	if (xtensa_get_sr(SREG_EPC) != XCHAL_HW_CONFIGID0 ||
294 	    xtensa_get_sr(SREG_EXCSAVE) != XCHAL_HW_CONFIGID1)
295 		pr_info("built for config ID: %08x:%08x\n",
296 			XCHAL_HW_CONFIGID0, XCHAL_HW_CONFIGID1);
297 
298 	*cmdline_p = command_line;
299 	platform_setup(cmdline_p);
300 	strscpy(boot_command_line, *cmdline_p, COMMAND_LINE_SIZE);
301 
302 	/* Reserve some memory regions */
303 
304 #ifdef CONFIG_BLK_DEV_INITRD
305 	if (initrd_start < initrd_end &&
306 	    !mem_reserve(__pa(initrd_start), __pa(initrd_end)))
307 		initrd_below_start_ok = 1;
308 	else
309 		initrd_start = 0;
310 #endif
311 
312 	mem_reserve(__pa(_stext), __pa(_end));
313 #ifdef CONFIG_XIP_KERNEL
314 	mem_reserve(__pa(_xip_start), __pa(_xip_end));
315 #endif
316 
317 #ifdef CONFIG_VECTORS_ADDR
318 #ifdef SUPPORT_WINDOWED
319 	mem_reserve(__pa(_WindowVectors_text_start),
320 		    __pa(_WindowVectors_text_end));
321 #endif
322 
323 	mem_reserve(__pa(_DebugInterruptVector_text_start),
324 		    __pa(_DebugInterruptVector_text_end));
325 
326 	mem_reserve(__pa(_KernelExceptionVector_text_start),
327 		    __pa(_KernelExceptionVector_text_end));
328 
329 	mem_reserve(__pa(_UserExceptionVector_text_start),
330 		    __pa(_UserExceptionVector_text_end));
331 
332 	mem_reserve(__pa(_DoubleExceptionVector_text_start),
333 		    __pa(_DoubleExceptionVector_text_end));
334 
335 	mem_reserve(__pa(_exception_text_start),
336 		    __pa(_exception_text_end));
337 #if XCHAL_EXCM_LEVEL >= 2
338 	mem_reserve(__pa(_Level2InterruptVector_text_start),
339 		    __pa(_Level2InterruptVector_text_end));
340 #endif
341 #if XCHAL_EXCM_LEVEL >= 3
342 	mem_reserve(__pa(_Level3InterruptVector_text_start),
343 		    __pa(_Level3InterruptVector_text_end));
344 #endif
345 #if XCHAL_EXCM_LEVEL >= 4
346 	mem_reserve(__pa(_Level4InterruptVector_text_start),
347 		    __pa(_Level4InterruptVector_text_end));
348 #endif
349 #if XCHAL_EXCM_LEVEL >= 5
350 	mem_reserve(__pa(_Level5InterruptVector_text_start),
351 		    __pa(_Level5InterruptVector_text_end));
352 #endif
353 #if XCHAL_EXCM_LEVEL >= 6
354 	mem_reserve(__pa(_Level6InterruptVector_text_start),
355 		    __pa(_Level6InterruptVector_text_end));
356 #endif
357 
358 #endif /* CONFIG_VECTORS_ADDR */
359 
360 #ifdef CONFIG_SECONDARY_RESET_VECTOR
361 	mem_reserve(__pa(_SecondaryResetVector_text_start),
362 		    __pa(_SecondaryResetVector_text_end));
363 #endif
364 	parse_early_param();
365 	bootmem_init();
366 	kasan_init();
367 	unflatten_and_copy_device_tree();
368 
369 #ifdef CONFIG_SMP
370 	smp_init_cpus();
371 #endif
372 
373 	paging_init();
374 	zones_init();
375 
376 #ifdef CONFIG_VT
377 # if defined(CONFIG_VGA_CONSOLE)
378 	conswitchp = &vga_con;
379 # endif
380 #endif
381 }
382 
383 static DEFINE_PER_CPU(struct cpu, cpu_data);
384 
385 static int __init topology_init(void)
386 {
387 	int i;
388 
389 	for_each_possible_cpu(i) {
390 		struct cpu *cpu = &per_cpu(cpu_data, i);
391 		cpu->hotpluggable = !!i;
392 		register_cpu(cpu, i);
393 	}
394 
395 	return 0;
396 }
397 subsys_initcall(topology_init);
398 
399 void cpu_reset(void)
400 {
401 #if XCHAL_HAVE_PTP_MMU && IS_ENABLED(CONFIG_MMU)
402 	local_irq_disable();
403 	/*
404 	 * We have full MMU: all autoload ways, ways 7, 8 and 9 of DTLB must
405 	 * be flushed.
406 	 * Way 4 is not currently used by linux.
407 	 * Ways 5 and 6 shall not be touched on MMUv2 as they are hardwired.
408 	 * Way 5 shall be flushed and way 6 shall be set to identity mapping
409 	 * on MMUv3.
410 	 */
411 	local_flush_tlb_all();
412 	invalidate_page_directory();
413 #if XCHAL_HAVE_SPANNING_WAY
414 	/* MMU v3 */
415 	{
416 		unsigned long vaddr = (unsigned long)cpu_reset;
417 		unsigned long paddr = __pa(vaddr);
418 		unsigned long tmpaddr = vaddr + SZ_512M;
419 		unsigned long tmp0, tmp1, tmp2, tmp3;
420 
421 		/*
422 		 * Find a place for the temporary mapping. It must not be
423 		 * in the same 512MB region with vaddr or paddr, otherwise
424 		 * there may be multihit exception either on entry to the
425 		 * temporary mapping, or on entry to the identity mapping.
426 		 * (512MB is the biggest page size supported by TLB.)
427 		 */
428 		while (((tmpaddr ^ paddr) & -SZ_512M) == 0)
429 			tmpaddr += SZ_512M;
430 
431 		/* Invalidate mapping in the selected temporary area */
432 		if (itlb_probe(tmpaddr) & BIT(ITLB_HIT_BIT))
433 			invalidate_itlb_entry(itlb_probe(tmpaddr));
434 		if (itlb_probe(tmpaddr + PAGE_SIZE) & BIT(ITLB_HIT_BIT))
435 			invalidate_itlb_entry(itlb_probe(tmpaddr + PAGE_SIZE));
436 
437 		/*
438 		 * Map two consecutive pages starting at the physical address
439 		 * of this function to the temporary mapping area.
440 		 */
441 		write_itlb_entry(__pte((paddr & PAGE_MASK) |
442 				       _PAGE_HW_VALID |
443 				       _PAGE_HW_EXEC |
444 				       _PAGE_CA_BYPASS),
445 				 tmpaddr & PAGE_MASK);
446 		write_itlb_entry(__pte(((paddr & PAGE_MASK) + PAGE_SIZE) |
447 				       _PAGE_HW_VALID |
448 				       _PAGE_HW_EXEC |
449 				       _PAGE_CA_BYPASS),
450 				 (tmpaddr & PAGE_MASK) + PAGE_SIZE);
451 
452 		/* Reinitialize TLB */
453 		__asm__ __volatile__ ("movi	%0, 1f\n\t"
454 				      "movi	%3, 2f\n\t"
455 				      "add	%0, %0, %4\n\t"
456 				      "add	%3, %3, %5\n\t"
457 				      "jx	%0\n"
458 				      /*
459 				       * No literal, data or stack access
460 				       * below this point
461 				       */
462 				      "1:\n\t"
463 				      /* Initialize *tlbcfg */
464 				      "movi	%0, 0\n\t"
465 				      "wsr	%0, itlbcfg\n\t"
466 				      "wsr	%0, dtlbcfg\n\t"
467 				      /* Invalidate TLB way 5 */
468 				      "movi	%0, 4\n\t"
469 				      "movi	%1, 5\n"
470 				      "1:\n\t"
471 				      "iitlb	%1\n\t"
472 				      "idtlb	%1\n\t"
473 				      "add	%1, %1, %6\n\t"
474 				      "addi	%0, %0, -1\n\t"
475 				      "bnez	%0, 1b\n\t"
476 				      /* Initialize TLB way 6 */
477 				      "movi	%0, 7\n\t"
478 				      "addi	%1, %9, 3\n\t"
479 				      "addi	%2, %9, 6\n"
480 				      "1:\n\t"
481 				      "witlb	%1, %2\n\t"
482 				      "wdtlb	%1, %2\n\t"
483 				      "add	%1, %1, %7\n\t"
484 				      "add	%2, %2, %7\n\t"
485 				      "addi	%0, %0, -1\n\t"
486 				      "bnez	%0, 1b\n\t"
487 				      "isync\n\t"
488 				      /* Jump to identity mapping */
489 				      "jx	%3\n"
490 				      "2:\n\t"
491 				      /* Complete way 6 initialization */
492 				      "witlb	%1, %2\n\t"
493 				      "wdtlb	%1, %2\n\t"
494 				      /* Invalidate temporary mapping */
495 				      "sub	%0, %9, %7\n\t"
496 				      "iitlb	%0\n\t"
497 				      "add	%0, %0, %8\n\t"
498 				      "iitlb	%0"
499 				      : "=&a"(tmp0), "=&a"(tmp1), "=&a"(tmp2),
500 					"=&a"(tmp3)
501 				      : "a"(tmpaddr - vaddr),
502 					"a"(paddr - vaddr),
503 					"a"(SZ_128M), "a"(SZ_512M),
504 					"a"(PAGE_SIZE),
505 					"a"((tmpaddr + SZ_512M) & PAGE_MASK)
506 				      : "memory");
507 	}
508 #endif
509 #endif
510 	__asm__ __volatile__ ("movi	a2, 0\n\t"
511 			      "wsr	a2, icountlevel\n\t"
512 			      "movi	a2, 0\n\t"
513 			      "wsr	a2, icount\n\t"
514 #if XCHAL_NUM_IBREAK > 0
515 			      "wsr	a2, ibreakenable\n\t"
516 #endif
517 #if XCHAL_HAVE_LOOPS
518 			      "wsr	a2, lcount\n\t"
519 #endif
520 			      "movi	a2, 0x1f\n\t"
521 			      "wsr	a2, ps\n\t"
522 			      "isync\n\t"
523 			      "jx	%0\n\t"
524 			      :
525 			      : "a" (XCHAL_RESET_VECTOR_VADDR)
526 			      : "a2");
527 	for (;;)
528 		;
529 }
530 
531 void machine_restart(char * cmd)
532 {
533 	local_irq_disable();
534 	smp_send_stop();
535 	do_kernel_restart(cmd);
536 	pr_err("Reboot failed -- System halted\n");
537 	while (1)
538 		cpu_relax();
539 }
540 
541 void machine_halt(void)
542 {
543 	local_irq_disable();
544 	smp_send_stop();
545 	do_kernel_power_off();
546 	while (1)
547 		cpu_relax();
548 }
549 
550 void machine_power_off(void)
551 {
552 	local_irq_disable();
553 	smp_send_stop();
554 	do_kernel_power_off();
555 	while (1)
556 		cpu_relax();
557 }
558 #ifdef CONFIG_PROC_FS
559 
560 /*
561  * Display some core information through /proc/cpuinfo.
562  */
563 
564 static int
565 c_show(struct seq_file *f, void *slot)
566 {
567 	/* high-level stuff */
568 	seq_printf(f, "CPU count\t: %u\n"
569 		      "CPU list\t: %*pbl\n"
570 		      "vendor_id\t: Tensilica\n"
571 		      "model\t\t: Xtensa " XCHAL_HW_VERSION_NAME "\n"
572 		      "core ID\t\t: " XCHAL_CORE_ID "\n"
573 		      "build ID\t: 0x%x\n"
574 		      "config ID\t: %08x:%08x\n"
575 		      "byte order\t: %s\n"
576 		      "cpu MHz\t\t: %lu.%02lu\n"
577 		      "bogomips\t: %lu.%02lu\n",
578 		      num_online_cpus(),
579 		      cpumask_pr_args(cpu_online_mask),
580 		      XCHAL_BUILD_UNIQUE_ID,
581 		      xtensa_get_sr(SREG_EPC), xtensa_get_sr(SREG_EXCSAVE),
582 		      XCHAL_HAVE_BE ?  "big" : "little",
583 		      ccount_freq/1000000,
584 		      (ccount_freq/10000) % 100,
585 		      loops_per_jiffy/(500000/HZ),
586 		      (loops_per_jiffy/(5000/HZ)) % 100);
587 	seq_puts(f, "flags\t\t: "
588 #if XCHAL_HAVE_NMI
589 		     "nmi "
590 #endif
591 #if XCHAL_HAVE_DEBUG
592 		     "debug "
593 # if XCHAL_HAVE_OCD
594 		     "ocd "
595 # endif
596 #if XCHAL_HAVE_TRAX
597 		     "trax "
598 #endif
599 #if XCHAL_NUM_PERF_COUNTERS
600 		     "perf "
601 #endif
602 #endif
603 #if XCHAL_HAVE_DENSITY
604 	    	     "density "
605 #endif
606 #if XCHAL_HAVE_BOOLEANS
607 		     "boolean "
608 #endif
609 #if XCHAL_HAVE_LOOPS
610 		     "loop "
611 #endif
612 #if XCHAL_HAVE_NSA
613 		     "nsa "
614 #endif
615 #if XCHAL_HAVE_MINMAX
616 		     "minmax "
617 #endif
618 #if XCHAL_HAVE_SEXT
619 		     "sext "
620 #endif
621 #if XCHAL_HAVE_CLAMPS
622 		     "clamps "
623 #endif
624 #if XCHAL_HAVE_MAC16
625 		     "mac16 "
626 #endif
627 #if XCHAL_HAVE_MUL16
628 		     "mul16 "
629 #endif
630 #if XCHAL_HAVE_MUL32
631 		     "mul32 "
632 #endif
633 #if XCHAL_HAVE_MUL32_HIGH
634 		     "mul32h "
635 #endif
636 #if XCHAL_HAVE_FP
637 		     "fpu "
638 #endif
639 #if XCHAL_HAVE_S32C1I
640 		     "s32c1i "
641 #endif
642 #if XCHAL_HAVE_EXCLUSIVE
643 		     "exclusive "
644 #endif
645 		     "\n");
646 
647 	/* Registers. */
648 	seq_printf(f,"physical aregs\t: %d\n"
649 		     "misc regs\t: %d\n"
650 		     "ibreak\t\t: %d\n"
651 		     "dbreak\t\t: %d\n"
652 		     "perf counters\t: %d\n",
653 		     XCHAL_NUM_AREGS,
654 		     XCHAL_NUM_MISC_REGS,
655 		     XCHAL_NUM_IBREAK,
656 		     XCHAL_NUM_DBREAK,
657 		     XCHAL_NUM_PERF_COUNTERS);
658 
659 
660 	/* Interrupt. */
661 	seq_printf(f,"num ints\t: %d\n"
662 		     "ext ints\t: %d\n"
663 		     "int levels\t: %d\n"
664 		     "timers\t\t: %d\n"
665 		     "debug level\t: %d\n",
666 		     XCHAL_NUM_INTERRUPTS,
667 		     XCHAL_NUM_EXTINTERRUPTS,
668 		     XCHAL_NUM_INTLEVELS,
669 		     XCHAL_NUM_TIMERS,
670 		     XCHAL_DEBUGLEVEL);
671 
672 	/* Cache */
673 	seq_printf(f,"icache line size: %d\n"
674 		     "icache ways\t: %d\n"
675 		     "icache size\t: %d\n"
676 		     "icache flags\t: "
677 #if XCHAL_ICACHE_LINE_LOCKABLE
678 		     "lock "
679 #endif
680 		     "\n"
681 		     "dcache line size: %d\n"
682 		     "dcache ways\t: %d\n"
683 		     "dcache size\t: %d\n"
684 		     "dcache flags\t: "
685 #if XCHAL_DCACHE_IS_WRITEBACK
686 		     "writeback "
687 #endif
688 #if XCHAL_DCACHE_LINE_LOCKABLE
689 		     "lock "
690 #endif
691 		     "\n",
692 		     XCHAL_ICACHE_LINESIZE,
693 		     XCHAL_ICACHE_WAYS,
694 		     XCHAL_ICACHE_SIZE,
695 		     XCHAL_DCACHE_LINESIZE,
696 		     XCHAL_DCACHE_WAYS,
697 		     XCHAL_DCACHE_SIZE);
698 
699 	return 0;
700 }
701 
702 /*
703  * We show only CPU #0 info.
704  */
705 static void *
706 c_start(struct seq_file *f, loff_t *pos)
707 {
708 	return (*pos == 0) ? (void *)1 : NULL;
709 }
710 
711 static void *
712 c_next(struct seq_file *f, void *v, loff_t *pos)
713 {
714 	++*pos;
715 	return c_start(f, pos);
716 }
717 
718 static void
719 c_stop(struct seq_file *f, void *v)
720 {
721 }
722 
723 const struct seq_operations cpuinfo_op =
724 {
725 	.start	= c_start,
726 	.next	= c_next,
727 	.stop	= c_stop,
728 	.show	= c_show,
729 };
730 
731 #endif /* CONFIG_PROC_FS */
732