xref: /openbmc/linux/arch/xtensa/kernel/setup.c (revision 293d5b43) 
1 /*
2  * arch/xtensa/kernel/setup.c
3  *
4  * This file is subject to the terms and conditions of the GNU General Public
5  * License.  See the file "COPYING" in the main directory of this archive
6  * for more details.
7  *
8  * Copyright (C) 1995  Linus Torvalds
9  * Copyright (C) 2001 - 2005  Tensilica Inc.
10  *
11  * Chris Zankel	<chris@zankel.net>
12  * Joe Taylor	<joe@tensilica.com, joetylr@yahoo.com>
13  * Kevin Chea
14  * Marc Gauthier<marc@tensilica.com> <marc@alumni.uwaterloo.ca>
15  */
16 
17 #include <linux/errno.h>
18 #include <linux/init.h>
19 #include <linux/mm.h>
20 #include <linux/proc_fs.h>
21 #include <linux/screen_info.h>
22 #include <linux/bootmem.h>
23 #include <linux/kernel.h>
24 #include <linux/percpu.h>
25 #include <linux/clk-provider.h>
26 #include <linux/cpu.h>
27 #include <linux/of.h>
28 #include <linux/of_fdt.h>
29 
30 #if defined(CONFIG_VGA_CONSOLE) || defined(CONFIG_DUMMY_CONSOLE)
31 # include <linux/console.h>
32 #endif
33 
34 #ifdef CONFIG_RTC
35 # include <linux/timex.h>
36 #endif
37 
38 #ifdef CONFIG_PROC_FS
39 # include <linux/seq_file.h>
40 #endif
41 
42 #include <asm/bootparam.h>
43 #include <asm/mmu_context.h>
44 #include <asm/pgtable.h>
45 #include <asm/processor.h>
46 #include <asm/timex.h>
47 #include <asm/platform.h>
48 #include <asm/page.h>
49 #include <asm/setup.h>
50 #include <asm/param.h>
51 #include <asm/traps.h>
52 #include <asm/smp.h>
53 #include <asm/sysmem.h>
54 
55 #include <platform/hardware.h>
56 
57 #if defined(CONFIG_VGA_CONSOLE) || defined(CONFIG_DUMMY_CONSOLE)
58 struct screen_info screen_info = { 0, 24, 0, 0, 0, 80, 0, 0, 0, 24, 1, 16};
59 #endif
60 
61 #ifdef CONFIG_BLK_DEV_FD
62 extern struct fd_ops no_fd_ops;
63 struct fd_ops *fd_ops;
64 #endif
65 
66 extern struct rtc_ops no_rtc_ops;
67 struct rtc_ops *rtc_ops;
68 
69 #ifdef CONFIG_BLK_DEV_INITRD
70 extern unsigned long initrd_start;
71 extern unsigned long initrd_end;
72 int initrd_is_mapped = 0;
73 extern int initrd_below_start_ok;
74 #endif
75 
76 #ifdef CONFIG_OF
77 void *dtb_start = __dtb_start;
78 #endif
79 
80 unsigned char aux_device_present;
81 extern unsigned long loops_per_jiffy;
82 
83 /* Command line specified as configuration option. */
84 
85 static char __initdata command_line[COMMAND_LINE_SIZE];
86 
87 #ifdef CONFIG_CMDLINE_BOOL
88 static char default_command_line[COMMAND_LINE_SIZE] __initdata = CONFIG_CMDLINE;
89 #endif
90 
91 /*
92  * Boot parameter parsing.
93  *
94  * The Xtensa port uses a list of variable-sized tags to pass data to
95  * the kernel. The first tag must be a BP_TAG_FIRST tag for the list
96  * to be recognised. The list is terminated with a zero-sized
97  * BP_TAG_LAST tag.
98  */
99 
100 typedef struct tagtable {
101 	u32 tag;
102 	int (*parse)(const bp_tag_t*);
103 } tagtable_t;
104 
105 #define __tagtable(tag, fn) static tagtable_t __tagtable_##fn 		\
106 	__attribute__((used, section(".taglist"))) = { tag, fn }
107 
108 /* parse current tag */
109 
110 static int __init parse_tag_mem(const bp_tag_t *tag)
111 {
112 	struct bp_meminfo *mi = (struct bp_meminfo *)(tag->data);
113 
114 	if (mi->type != MEMORY_TYPE_CONVENTIONAL)
115 		return -1;
116 
117 	return add_sysmem_bank(mi->start, mi->end);
118 }
119 
120 __tagtable(BP_TAG_MEMORY, parse_tag_mem);
121 
122 #ifdef CONFIG_BLK_DEV_INITRD
123 
124 static int __init parse_tag_initrd(const bp_tag_t* tag)
125 {
126 	struct bp_meminfo *mi = (struct bp_meminfo *)(tag->data);
127 
128 	initrd_start = (unsigned long)__va(mi->start);
129 	initrd_end = (unsigned long)__va(mi->end);
130 
131 	return 0;
132 }
133 
134 __tagtable(BP_TAG_INITRD, parse_tag_initrd);
135 
136 #ifdef CONFIG_OF
137 
138 static int __init parse_tag_fdt(const bp_tag_t *tag)
139 {
140 	dtb_start = __va(tag->data[0]);
141 	return 0;
142 }
143 
144 __tagtable(BP_TAG_FDT, parse_tag_fdt);
145 
146 #endif /* CONFIG_OF */
147 
148 #endif /* CONFIG_BLK_DEV_INITRD */
149 
150 static int __init parse_tag_cmdline(const bp_tag_t* tag)
151 {
152 	strlcpy(command_line, (char *)(tag->data), COMMAND_LINE_SIZE);
153 	return 0;
154 }
155 
156 __tagtable(BP_TAG_COMMAND_LINE, parse_tag_cmdline);
157 
158 static int __init parse_bootparam(const bp_tag_t* tag)
159 {
160 	extern tagtable_t __tagtable_begin, __tagtable_end;
161 	tagtable_t *t;
162 
163 	/* Boot parameters must start with a BP_TAG_FIRST tag. */
164 
165 	if (tag->id != BP_TAG_FIRST) {
166 		printk(KERN_WARNING "Invalid boot parameters!\n");
167 		return 0;
168 	}
169 
170 	tag = (bp_tag_t*)((unsigned long)tag + sizeof(bp_tag_t) + tag->size);
171 
172 	/* Parse all tags. */
173 
174 	while (tag != NULL && tag->id != BP_TAG_LAST) {
175 	 	for (t = &__tagtable_begin; t < &__tagtable_end; t++) {
176 			if (tag->id == t->tag) {
177 				t->parse(tag);
178 				break;
179 			}
180 		}
181 		if (t == &__tagtable_end)
182 			printk(KERN_WARNING "Ignoring tag "
183 			       "0x%08x\n", tag->id);
184 		tag = (bp_tag_t*)((unsigned long)(tag + 1) + tag->size);
185 	}
186 
187 	return 0;
188 }
189 
190 #ifdef CONFIG_OF
191 bool __initdata dt_memory_scan = false;
192 
193 #if !XCHAL_HAVE_PTP_MMU || XCHAL_HAVE_SPANNING_WAY
194 unsigned long xtensa_kio_paddr = XCHAL_KIO_DEFAULT_PADDR;
195 EXPORT_SYMBOL(xtensa_kio_paddr);
196 
197 static int __init xtensa_dt_io_area(unsigned long node, const char *uname,
198 		int depth, void *data)
199 {
200 	const __be32 *ranges;
201 	int len;
202 
203 	if (depth > 1)
204 		return 0;
205 
206 	if (!of_flat_dt_is_compatible(node, "simple-bus"))
207 		return 0;
208 
209 	ranges = of_get_flat_dt_prop(node, "ranges", &len);
210 	if (!ranges)
211 		return 1;
212 	if (len == 0)
213 		return 1;
214 
215 	xtensa_kio_paddr = of_read_ulong(ranges+1, 1);
216 	/* round down to nearest 256MB boundary */
217 	xtensa_kio_paddr &= 0xf0000000;
218 
219 	return 1;
220 }
221 #else
222 static int __init xtensa_dt_io_area(unsigned long node, const char *uname,
223 		int depth, void *data)
224 {
225 	return 1;
226 }
227 #endif
228 
229 void __init early_init_dt_add_memory_arch(u64 base, u64 size)
230 {
231 	if (!dt_memory_scan)
232 		return;
233 
234 	size &= PAGE_MASK;
235 	add_sysmem_bank(base, base + size);
236 }
237 
238 void * __init early_init_dt_alloc_memory_arch(u64 size, u64 align)
239 {
240 	return __alloc_bootmem(size, align, 0);
241 }
242 
243 void __init early_init_devtree(void *params)
244 {
245 	if (sysmem.nr_banks == 0)
246 		dt_memory_scan = true;
247 
248 	early_init_dt_scan(params);
249 	of_scan_flat_dt(xtensa_dt_io_area, NULL);
250 
251 	if (!command_line[0])
252 		strlcpy(command_line, boot_command_line, COMMAND_LINE_SIZE);
253 }
254 
255 static int __init xtensa_device_probe(void)
256 {
257 	of_clk_init(NULL);
258 	return 0;
259 }
260 
261 device_initcall(xtensa_device_probe);
262 
263 #endif /* CONFIG_OF */
264 
265 /*
266  * Initialize architecture. (Early stage)
267  */
268 
269 void __init init_arch(bp_tag_t *bp_start)
270 {
271 	/* Parse boot parameters */
272 
273 	if (bp_start)
274 		parse_bootparam(bp_start);
275 
276 #ifdef CONFIG_OF
277 	early_init_devtree(dtb_start);
278 #endif
279 
280 	if (sysmem.nr_banks == 0) {
281 		add_sysmem_bank(PLATFORM_DEFAULT_MEM_START,
282 				PLATFORM_DEFAULT_MEM_START +
283 				PLATFORM_DEFAULT_MEM_SIZE);
284 	}
285 
286 #ifdef CONFIG_CMDLINE_BOOL
287 	if (!command_line[0])
288 		strlcpy(command_line, default_command_line, COMMAND_LINE_SIZE);
289 #endif
290 
291 	/* Early hook for platforms */
292 
293 	platform_init(bp_start);
294 
295 	/* Initialize MMU. */
296 
297 	init_mmu();
298 }
299 
300 /*
301  * Initialize system. Setup memory and reserve regions.
302  */
303 
304 extern char _end;
305 extern char _stext;
306 extern char _WindowVectors_text_start;
307 extern char _WindowVectors_text_end;
308 extern char _DebugInterruptVector_literal_start;
309 extern char _DebugInterruptVector_text_end;
310 extern char _KernelExceptionVector_literal_start;
311 extern char _KernelExceptionVector_text_end;
312 extern char _UserExceptionVector_literal_start;
313 extern char _UserExceptionVector_text_end;
314 extern char _DoubleExceptionVector_literal_start;
315 extern char _DoubleExceptionVector_text_end;
316 #if XCHAL_EXCM_LEVEL >= 2
317 extern char _Level2InterruptVector_text_start;
318 extern char _Level2InterruptVector_text_end;
319 #endif
320 #if XCHAL_EXCM_LEVEL >= 3
321 extern char _Level3InterruptVector_text_start;
322 extern char _Level3InterruptVector_text_end;
323 #endif
324 #if XCHAL_EXCM_LEVEL >= 4
325 extern char _Level4InterruptVector_text_start;
326 extern char _Level4InterruptVector_text_end;
327 #endif
328 #if XCHAL_EXCM_LEVEL >= 5
329 extern char _Level5InterruptVector_text_start;
330 extern char _Level5InterruptVector_text_end;
331 #endif
332 #if XCHAL_EXCM_LEVEL >= 6
333 extern char _Level6InterruptVector_text_start;
334 extern char _Level6InterruptVector_text_end;
335 #endif
336 #ifdef CONFIG_SMP
337 extern char _SecondaryResetVector_text_start;
338 extern char _SecondaryResetVector_text_end;
339 #endif
340 
341 
342 #ifdef CONFIG_S32C1I_SELFTEST
343 #if XCHAL_HAVE_S32C1I
344 
345 static int __initdata rcw_word, rcw_probe_pc, rcw_exc;
346 
347 /*
348  * Basic atomic compare-and-swap, that records PC of S32C1I for probing.
349  *
350  * If *v == cmp, set *v = set.  Return previous *v.
351  */
352 static inline int probed_compare_swap(int *v, int cmp, int set)
353 {
354 	int tmp;
355 
356 	__asm__ __volatile__(
357 			"	movi	%1, 1f\n"
358 			"	s32i	%1, %4, 0\n"
359 			"	wsr	%2, scompare1\n"
360 			"1:	s32c1i	%0, %3, 0\n"
361 			: "=a" (set), "=&a" (tmp)
362 			: "a" (cmp), "a" (v), "a" (&rcw_probe_pc), "0" (set)
363 			: "memory"
364 			);
365 	return set;
366 }
367 
368 /* Handle probed exception */
369 
370 static void __init do_probed_exception(struct pt_regs *regs,
371 		unsigned long exccause)
372 {
373 	if (regs->pc == rcw_probe_pc) {	/* exception on s32c1i ? */
374 		regs->pc += 3;		/* skip the s32c1i instruction */
375 		rcw_exc = exccause;
376 	} else {
377 		do_unhandled(regs, exccause);
378 	}
379 }
380 
381 /* Simple test of S32C1I (soc bringup assist) */
382 
383 static int __init check_s32c1i(void)
384 {
385 	int n, cause1, cause2;
386 	void *handbus, *handdata, *handaddr; /* temporarily saved handlers */
387 
388 	rcw_probe_pc = 0;
389 	handbus  = trap_set_handler(EXCCAUSE_LOAD_STORE_ERROR,
390 			do_probed_exception);
391 	handdata = trap_set_handler(EXCCAUSE_LOAD_STORE_DATA_ERROR,
392 			do_probed_exception);
393 	handaddr = trap_set_handler(EXCCAUSE_LOAD_STORE_ADDR_ERROR,
394 			do_probed_exception);
395 
396 	/* First try an S32C1I that does not store: */
397 	rcw_exc = 0;
398 	rcw_word = 1;
399 	n = probed_compare_swap(&rcw_word, 0, 2);
400 	cause1 = rcw_exc;
401 
402 	/* took exception? */
403 	if (cause1 != 0) {
404 		/* unclean exception? */
405 		if (n != 2 || rcw_word != 1)
406 			panic("S32C1I exception error");
407 	} else if (rcw_word != 1 || n != 1) {
408 		panic("S32C1I compare error");
409 	}
410 
411 	/* Then an S32C1I that stores: */
412 	rcw_exc = 0;
413 	rcw_word = 0x1234567;
414 	n = probed_compare_swap(&rcw_word, 0x1234567, 0xabcde);
415 	cause2 = rcw_exc;
416 
417 	if (cause2 != 0) {
418 		/* unclean exception? */
419 		if (n != 0xabcde || rcw_word != 0x1234567)
420 			panic("S32C1I exception error (b)");
421 	} else if (rcw_word != 0xabcde || n != 0x1234567) {
422 		panic("S32C1I store error");
423 	}
424 
425 	/* Verify consistency of exceptions: */
426 	if (cause1 || cause2) {
427 		pr_warn("S32C1I took exception %d, %d\n", cause1, cause2);
428 		/* If emulation of S32C1I upon bus error gets implemented,
429 		   we can get rid of this panic for single core (not SMP) */
430 		panic("S32C1I exceptions not currently supported");
431 	}
432 	if (cause1 != cause2)
433 		panic("inconsistent S32C1I exceptions");
434 
435 	trap_set_handler(EXCCAUSE_LOAD_STORE_ERROR, handbus);
436 	trap_set_handler(EXCCAUSE_LOAD_STORE_DATA_ERROR, handdata);
437 	trap_set_handler(EXCCAUSE_LOAD_STORE_ADDR_ERROR, handaddr);
438 	return 0;
439 }
440 
441 #else /* XCHAL_HAVE_S32C1I */
442 
443 /* This condition should not occur with a commercially deployed processor.
444    Display reminder for early engr test or demo chips / FPGA bitstreams */
445 static int __init check_s32c1i(void)
446 {
447 	pr_warn("Processor configuration lacks atomic compare-and-swap support!\n");
448 	return 0;
449 }
450 
451 #endif /* XCHAL_HAVE_S32C1I */
452 early_initcall(check_s32c1i);
453 #endif /* CONFIG_S32C1I_SELFTEST */
454 
455 
456 void __init setup_arch(char **cmdline_p)
457 {
458 	strlcpy(boot_command_line, command_line, COMMAND_LINE_SIZE);
459 	*cmdline_p = command_line;
460 
461 	/* Reserve some memory regions */
462 
463 #ifdef CONFIG_BLK_DEV_INITRD
464 	if (initrd_start < initrd_end) {
465 		initrd_is_mapped = mem_reserve(__pa(initrd_start),
466 					       __pa(initrd_end), 0) == 0;
467 		initrd_below_start_ok = 1;
468 	} else {
469 		initrd_start = 0;
470 	}
471 #endif
472 
473 	mem_reserve(__pa(&_stext),__pa(&_end), 1);
474 
475 	mem_reserve(__pa(&_WindowVectors_text_start),
476 		    __pa(&_WindowVectors_text_end), 0);
477 
478 	mem_reserve(__pa(&_DebugInterruptVector_literal_start),
479 		    __pa(&_DebugInterruptVector_text_end), 0);
480 
481 	mem_reserve(__pa(&_KernelExceptionVector_literal_start),
482 		    __pa(&_KernelExceptionVector_text_end), 0);
483 
484 	mem_reserve(__pa(&_UserExceptionVector_literal_start),
485 		    __pa(&_UserExceptionVector_text_end), 0);
486 
487 	mem_reserve(__pa(&_DoubleExceptionVector_literal_start),
488 		    __pa(&_DoubleExceptionVector_text_end), 0);
489 
490 #if XCHAL_EXCM_LEVEL >= 2
491 	mem_reserve(__pa(&_Level2InterruptVector_text_start),
492 		    __pa(&_Level2InterruptVector_text_end), 0);
493 #endif
494 #if XCHAL_EXCM_LEVEL >= 3
495 	mem_reserve(__pa(&_Level3InterruptVector_text_start),
496 		    __pa(&_Level3InterruptVector_text_end), 0);
497 #endif
498 #if XCHAL_EXCM_LEVEL >= 4
499 	mem_reserve(__pa(&_Level4InterruptVector_text_start),
500 		    __pa(&_Level4InterruptVector_text_end), 0);
501 #endif
502 #if XCHAL_EXCM_LEVEL >= 5
503 	mem_reserve(__pa(&_Level5InterruptVector_text_start),
504 		    __pa(&_Level5InterruptVector_text_end), 0);
505 #endif
506 #if XCHAL_EXCM_LEVEL >= 6
507 	mem_reserve(__pa(&_Level6InterruptVector_text_start),
508 		    __pa(&_Level6InterruptVector_text_end), 0);
509 #endif
510 
511 #ifdef CONFIG_SMP
512 	mem_reserve(__pa(&_SecondaryResetVector_text_start),
513 		    __pa(&_SecondaryResetVector_text_end), 0);
514 #endif
515 	parse_early_param();
516 	bootmem_init();
517 
518 	unflatten_and_copy_device_tree();
519 
520 	platform_setup(cmdline_p);
521 
522 #ifdef CONFIG_SMP
523 	smp_init_cpus();
524 #endif
525 
526 	paging_init();
527 	zones_init();
528 
529 #ifdef CONFIG_VT
530 # if defined(CONFIG_VGA_CONSOLE)
531 	conswitchp = &vga_con;
532 # elif defined(CONFIG_DUMMY_CONSOLE)
533 	conswitchp = &dummy_con;
534 # endif
535 #endif
536 
537 #ifdef CONFIG_PCI
538 	platform_pcibios_init();
539 #endif
540 }
541 
542 static DEFINE_PER_CPU(struct cpu, cpu_data);
543 
544 static int __init topology_init(void)
545 {
546 	int i;
547 
548 	for_each_possible_cpu(i) {
549 		struct cpu *cpu = &per_cpu(cpu_data, i);
550 		cpu->hotpluggable = !!i;
551 		register_cpu(cpu, i);
552 	}
553 
554 	return 0;
555 }
556 subsys_initcall(topology_init);
557 
558 void machine_restart(char * cmd)
559 {
560 	platform_restart();
561 }
562 
563 void machine_halt(void)
564 {
565 	platform_halt();
566 	while (1);
567 }
568 
569 void machine_power_off(void)
570 {
571 	platform_power_off();
572 	while (1);
573 }
574 #ifdef CONFIG_PROC_FS
575 
576 /*
577  * Display some core information through /proc/cpuinfo.
578  */
579 
580 static int
581 c_show(struct seq_file *f, void *slot)
582 {
583 	/* high-level stuff */
584 	seq_printf(f, "CPU count\t: %u\n"
585 		      "CPU list\t: %*pbl\n"
586 		      "vendor_id\t: Tensilica\n"
587 		      "model\t\t: Xtensa " XCHAL_HW_VERSION_NAME "\n"
588 		      "core ID\t\t: " XCHAL_CORE_ID "\n"
589 		      "build ID\t: 0x%x\n"
590 		      "byte order\t: %s\n"
591 		      "cpu MHz\t\t: %lu.%02lu\n"
592 		      "bogomips\t: %lu.%02lu\n",
593 		      num_online_cpus(),
594 		      cpumask_pr_args(cpu_online_mask),
595 		      XCHAL_BUILD_UNIQUE_ID,
596 		      XCHAL_HAVE_BE ?  "big" : "little",
597 		      ccount_freq/1000000,
598 		      (ccount_freq/10000) % 100,
599 		      loops_per_jiffy/(500000/HZ),
600 		      (loops_per_jiffy/(5000/HZ)) % 100);
601 
602 	seq_printf(f,"flags\t\t: "
603 #if XCHAL_HAVE_NMI
604 		     "nmi "
605 #endif
606 #if XCHAL_HAVE_DEBUG
607 		     "debug "
608 # if XCHAL_HAVE_OCD
609 		     "ocd "
610 # endif
611 #endif
612 #if XCHAL_HAVE_DENSITY
613 	    	     "density "
614 #endif
615 #if XCHAL_HAVE_BOOLEANS
616 		     "boolean "
617 #endif
618 #if XCHAL_HAVE_LOOPS
619 		     "loop "
620 #endif
621 #if XCHAL_HAVE_NSA
622 		     "nsa "
623 #endif
624 #if XCHAL_HAVE_MINMAX
625 		     "minmax "
626 #endif
627 #if XCHAL_HAVE_SEXT
628 		     "sext "
629 #endif
630 #if XCHAL_HAVE_CLAMPS
631 		     "clamps "
632 #endif
633 #if XCHAL_HAVE_MAC16
634 		     "mac16 "
635 #endif
636 #if XCHAL_HAVE_MUL16
637 		     "mul16 "
638 #endif
639 #if XCHAL_HAVE_MUL32
640 		     "mul32 "
641 #endif
642 #if XCHAL_HAVE_MUL32_HIGH
643 		     "mul32h "
644 #endif
645 #if XCHAL_HAVE_FP
646 		     "fpu "
647 #endif
648 #if XCHAL_HAVE_S32C1I
649 		     "s32c1i "
650 #endif
651 		     "\n");
652 
653 	/* Registers. */
654 	seq_printf(f,"physical aregs\t: %d\n"
655 		     "misc regs\t: %d\n"
656 		     "ibreak\t\t: %d\n"
657 		     "dbreak\t\t: %d\n",
658 		     XCHAL_NUM_AREGS,
659 		     XCHAL_NUM_MISC_REGS,
660 		     XCHAL_NUM_IBREAK,
661 		     XCHAL_NUM_DBREAK);
662 
663 
664 	/* Interrupt. */
665 	seq_printf(f,"num ints\t: %d\n"
666 		     "ext ints\t: %d\n"
667 		     "int levels\t: %d\n"
668 		     "timers\t\t: %d\n"
669 		     "debug level\t: %d\n",
670 		     XCHAL_NUM_INTERRUPTS,
671 		     XCHAL_NUM_EXTINTERRUPTS,
672 		     XCHAL_NUM_INTLEVELS,
673 		     XCHAL_NUM_TIMERS,
674 		     XCHAL_DEBUGLEVEL);
675 
676 	/* Cache */
677 	seq_printf(f,"icache line size: %d\n"
678 		     "icache ways\t: %d\n"
679 		     "icache size\t: %d\n"
680 		     "icache flags\t: "
681 #if XCHAL_ICACHE_LINE_LOCKABLE
682 		     "lock "
683 #endif
684 		     "\n"
685 		     "dcache line size: %d\n"
686 		     "dcache ways\t: %d\n"
687 		     "dcache size\t: %d\n"
688 		     "dcache flags\t: "
689 #if XCHAL_DCACHE_IS_WRITEBACK
690 		     "writeback "
691 #endif
692 #if XCHAL_DCACHE_LINE_LOCKABLE
693 		     "lock "
694 #endif
695 		     "\n",
696 		     XCHAL_ICACHE_LINESIZE,
697 		     XCHAL_ICACHE_WAYS,
698 		     XCHAL_ICACHE_SIZE,
699 		     XCHAL_DCACHE_LINESIZE,
700 		     XCHAL_DCACHE_WAYS,
701 		     XCHAL_DCACHE_SIZE);
702 
703 	return 0;
704 }
705 
706 /*
707  * We show only CPU #0 info.
708  */
709 static void *
710 c_start(struct seq_file *f, loff_t *pos)
711 {
712 	return (*pos == 0) ? (void *)1 : NULL;
713 }
714 
715 static void *
716 c_next(struct seq_file *f, void *v, loff_t *pos)
717 {
718 	return NULL;
719 }
720 
721 static void
722 c_stop(struct seq_file *f, void *v)
723 {
724 }
725 
726 const struct seq_operations cpuinfo_op =
727 {
728 	.start	= c_start,
729 	.next	= c_next,
730 	.stop	= c_stop,
731 	.show	= c_show,
732 };
733 
734 #endif /* CONFIG_PROC_FS */
735