xref: /openbmc/linux/arch/xtensa/kernel/head.S (revision 6d99a79c) 
1/*
2 * arch/xtensa/kernel/head.S
3 *
4 * Xtensa Processor startup code.
5 *
6 * This file is subject to the terms and conditions of the GNU General Public
7 * License.  See the file "COPYING" in the main directory of this archive
8 * for more details.
9 *
10 * Copyright (C) 2001 - 2008 Tensilica Inc.
11 *
12 * Chris Zankel <chris@zankel.net>
13 * Marc Gauthier <marc@tensilica.com, marc@alumni.uwaterloo.ca>
14 * Joe Taylor <joe@tensilica.com, joetylr@yahoo.com>
15 * Kevin Chea
16 */
17
18#include <asm/processor.h>
19#include <asm/page.h>
20#include <asm/cacheasm.h>
21#include <asm/initialize_mmu.h>
22#include <asm/mxregs.h>
23
24#include <linux/init.h>
25#include <linux/linkage.h>
26
27/*
28 * This module contains the entry code for kernel images. It performs the
29 * minimal setup needed to call the generic C routines.
30 *
31 * Prerequisites:
32 *
33 * - The kernel image has been loaded to the actual address where it was
34 *   compiled to.
35 * - a2 contains either 0 or a pointer to a list of boot parameters.
36 *   (see setup.c for more details)
37 *
38 */
39
40/*
41 *  _start
42 *
43 *  The bootloader passes a pointer to a list of boot parameters in a2.
44 */
45
46	/* The first bytes of the kernel image must be an instruction, so we
47	 * manually allocate and define the literal constant we need for a jx
48	 * instruction.
49	 */
50
51	__HEAD
52	.begin	no-absolute-literals
53
54ENTRY(_start)
55
56	/* Preserve the pointer to the boot parameter list in EXCSAVE_1 */
57	wsr     a2, excsave1
58	_j	_SetupOCD
59
60	.align	4
61	.literal_position
62.Lstartup:
63	.word	_startup
64
65	.align	4
66_SetupOCD:
67	/*
68	 * Initialize WB, WS, and clear PS.EXCM (to allow loop instructions).
69	 * Set Interrupt Level just below XCHAL_DEBUGLEVEL to allow
70	 * xt-gdb to single step via DEBUG exceptions received directly
71	 * by ocd.
72	 */
73	movi	a1, 1
74	movi	a0, 0
75	wsr	a1, windowstart
76	wsr	a0, windowbase
77	rsync
78
79	movi	a1, LOCKLEVEL
80	wsr	a1, ps
81	rsync
82
83	.global _SetupMMU
84_SetupMMU:
85	Offset = _SetupMMU - _start
86
87#ifdef CONFIG_INITIALIZE_XTENSA_MMU_INSIDE_VMLINUX
88	initialize_mmu
89#if defined(CONFIG_MMU) && XCHAL_HAVE_PTP_MMU && XCHAL_HAVE_SPANNING_WAY
90	rsr	a2, excsave1
91	movi	a3, XCHAL_KSEG_PADDR
92	bltu	a2, a3, 1f
93	sub	a2, a2, a3
94	movi	a3, XCHAL_KSEG_SIZE
95	bgeu	a2, a3, 1f
96	movi	a3, XCHAL_KSEG_CACHED_VADDR
97	add	a2, a2, a3
98	wsr	a2, excsave1
991:
100#endif
101#endif
102	.end	no-absolute-literals
103
104	l32r	a0, .Lstartup
105	jx	a0
106
107ENDPROC(_start)
108
109	__REF
110	.literal_position
111
112ENTRY(_startup)
113
114	/* Set a0 to 0 for the remaining initialization. */
115
116	movi	a0, 0
117
118#if XCHAL_HAVE_VECBASE
119	movi    a2, VECBASE_VADDR
120	wsr	a2, vecbase
121#endif
122
123	/* Clear debugging registers. */
124
125#if XCHAL_HAVE_DEBUG
126#if XCHAL_NUM_IBREAK > 0
127	wsr	a0, ibreakenable
128#endif
129	wsr	a0, icount
130	movi	a1, 15
131	wsr	a0, icountlevel
132
133	.set	_index, 0
134	.rept	XCHAL_NUM_DBREAK
135	wsr	a0, SREG_DBREAKC + _index
136	.set	_index, _index + 1
137	.endr
138#endif
139
140	/* Clear CCOUNT (not really necessary, but nice) */
141
142	wsr	a0, ccount	# not really necessary, but nice
143
144	/* Disable zero-loops. */
145
146#if XCHAL_HAVE_LOOPS
147	wsr	a0, lcount
148#endif
149
150	/* Disable all timers. */
151
152	.set	_index, 0
153	.rept	XCHAL_NUM_TIMERS
154	wsr	a0, SREG_CCOMPARE + _index
155	.set	_index, _index + 1
156	.endr
157
158	/* Interrupt initialization. */
159
160	movi	a2, XCHAL_INTTYPE_MASK_SOFTWARE | XCHAL_INTTYPE_MASK_EXTERN_EDGE
161	wsr	a0, intenable
162	wsr	a2, intclear
163
164	/* Disable coprocessors. */
165
166#if XCHAL_HAVE_CP
167	wsr	a0, cpenable
168#endif
169
170	/*  Initialize the caches.
171	 *  a2, a3 are just working registers (clobbered).
172	 */
173
174#if XCHAL_DCACHE_LINE_LOCKABLE
175	___unlock_dcache_all a2 a3
176#endif
177
178#if XCHAL_ICACHE_LINE_LOCKABLE
179	___unlock_icache_all a2 a3
180#endif
181
182	___invalidate_dcache_all a2 a3
183	___invalidate_icache_all a2 a3
184
185	isync
186
187	initialize_cacheattr
188
189#ifdef CONFIG_HAVE_SMP
190	movi	a2, CCON	# MX External Register to Configure Cache
191	movi	a3, 1
192	wer	a3, a2
193#endif
194
195	/* Setup stack and enable window exceptions (keep irqs disabled) */
196
197	movi	a1, start_info
198	l32i	a1, a1, 0
199
200	movi	a2, (1 << PS_WOE_BIT) | LOCKLEVEL
201					# WOE=1, INTLEVEL=LOCKLEVEL, UM=0
202	wsr	a2, ps			# (enable reg-windows; progmode stack)
203	rsync
204
205#ifdef CONFIG_SMP
206	/*
207	 * Notice that we assume with SMP that cores have PRID
208	 * supported by the cores.
209	 */
210	rsr	a2, prid
211	bnez	a2, .Lboot_secondary
212
213#endif  /* CONFIG_SMP */
214
215	/* Unpack data sections
216	 *
217	 * The linker script used to build the Linux kernel image
218	 * creates a table located at __boot_reloc_table_start
219	 * that contans the information what data needs to be unpacked.
220	 *
221	 * Uses a2-a7.
222	 */
223
224	movi	a2, __boot_reloc_table_start
225	movi	a3, __boot_reloc_table_end
226
2271:	beq	a2, a3, 3f	# no more entries?
228	l32i	a4, a2, 0	# start destination (in RAM)
229	l32i	a5, a2, 4	# end desination (in RAM)
230	l32i	a6, a2, 8	# start source (in ROM)
231	addi	a2, a2, 12	# next entry
232	beq	a4, a5, 1b	# skip, empty entry
233	beq	a4, a6, 1b	# skip, source and dest. are the same
234
2352:	l32i	a7, a6, 0	# load word
236	addi	a6, a6, 4
237	s32i	a7, a4, 0	# store word
238	addi	a4, a4, 4
239	bltu	a4, a5, 2b
240	j	1b
241
2423:
243	/* All code and initialized data segments have been copied.
244	 * Now clear the BSS segment.
245	 */
246
247	movi	a2, __bss_start	# start of BSS
248	movi	a3, __bss_stop	# end of BSS
249
250	__loopt	a2, a3, a4, 2
251	s32i	a0, a2, 0
252	__endla	a2, a3, 4
253
254#if XCHAL_DCACHE_IS_WRITEBACK
255
256	/* After unpacking, flush the writeback cache to memory so the
257	 * instructions/data are available.
258	 */
259
260	___flush_dcache_all a2 a3
261#endif
262	memw
263	isync
264	___invalidate_icache_all a2 a3
265	isync
266
267	movi	a6, 0
268	xsr	a6, excsave1
269
270	/* init_arch kick-starts the linux kernel */
271
272	call4	init_arch
273	call4	start_kernel
274
275should_never_return:
276	j	should_never_return
277
278#ifdef CONFIG_SMP
279.Lboot_secondary:
280
281	movi	a2, cpu_start_ccount
2821:
283	l32i	a3, a2, 0
284	beqi	a3, 0, 1b
285	movi	a3, 0
286	s32i	a3, a2, 0
287	memw
2881:
289	l32i	a3, a2, 0
290	beqi	a3, 0, 1b
291	wsr	a3, ccount
292	movi	a3, 0
293	s32i	a3, a2, 0
294	memw
295
296	movi	a6, 0
297	wsr	a6, excsave1
298
299	call4	secondary_start_kernel
300	j	should_never_return
301
302#endif  /* CONFIG_SMP */
303
304ENDPROC(_startup)
305
306#ifdef CONFIG_HOTPLUG_CPU
307
308ENTRY(cpu_restart)
309
310#if XCHAL_DCACHE_IS_WRITEBACK
311	___flush_invalidate_dcache_all a2 a3
312#else
313	___invalidate_dcache_all a2 a3
314#endif
315	memw
316	movi	a2, CCON	# MX External Register to Configure Cache
317	movi	a3, 0
318	wer	a3, a2
319	extw
320
321	rsr	a0, prid
322	neg	a2, a0
323	movi	a3, cpu_start_id
324	s32i	a2, a3, 0
325#if XCHAL_DCACHE_IS_WRITEBACK
326	dhwbi	a3, 0
327#endif
3281:
329	l32i	a2, a3, 0
330	dhi	a3, 0
331	bne	a2, a0, 1b
332
333	/*
334	 * Initialize WB, WS, and clear PS.EXCM (to allow loop instructions).
335	 * Set Interrupt Level just below XCHAL_DEBUGLEVEL to allow
336	 * xt-gdb to single step via DEBUG exceptions received directly
337	 * by ocd.
338	 */
339	movi	a1, 1
340	movi	a0, 0
341	wsr	a1, windowstart
342	wsr	a0, windowbase
343	rsync
344
345	movi	a1, LOCKLEVEL
346	wsr	a1, ps
347	rsync
348
349	j	_startup
350
351ENDPROC(cpu_restart)
352
353#endif  /* CONFIG_HOTPLUG_CPU */
354
355/*
356 * DATA section
357 */
358
359        .section ".data.init.refok"
360        .align  4
361ENTRY(start_info)
362        .long   init_thread_union + KERNEL_STACK_SIZE
363
364/*
365 * BSS section
366 */
367
368__PAGE_ALIGNED_BSS
369#ifdef CONFIG_MMU
370ENTRY(swapper_pg_dir)
371	.fill	PAGE_SIZE, 1, 0
372END(swapper_pg_dir)
373#endif
374ENTRY(empty_zero_page)
375	.fill	PAGE_SIZE, 1, 0
376END(empty_zero_page)
377