1/* 2 * Low-level exception handling 3 * 4 * This file is subject to the terms and conditions of the GNU General Public 5 * License. See the file "COPYING" in the main directory of this archive 6 * for more details. 7 * 8 * Copyright (C) 2004 - 2008 by Tensilica Inc. 9 * Copyright (C) 2015 Cadence Design Systems Inc. 10 * 11 * Chris Zankel <chris@zankel.net> 12 * 13 */ 14 15#include <linux/linkage.h> 16#include <linux/pgtable.h> 17#include <asm/asm-offsets.h> 18#include <asm/asmmacro.h> 19#include <asm/processor.h> 20#include <asm/coprocessor.h> 21#include <asm/thread_info.h> 22#include <asm/asm-uaccess.h> 23#include <asm/unistd.h> 24#include <asm/ptrace.h> 25#include <asm/current.h> 26#include <asm/page.h> 27#include <asm/signal.h> 28#include <asm/tlbflush.h> 29#include <variant/tie-asm.h> 30 31/* Unimplemented features. */ 32 33#undef KERNEL_STACK_OVERFLOW_CHECK 34 35/* Not well tested. 36 * 37 * - fast_coprocessor 38 */ 39 40/* 41 * Macro to find first bit set in WINDOWBASE from the left + 1 42 * 43 * 100....0 -> 1 44 * 010....0 -> 2 45 * 000....1 -> WSBITS 46 */ 47 48 .macro ffs_ws bit mask 49 50#if XCHAL_HAVE_NSA 51 nsau \bit, \mask # 32-WSBITS ... 31 (32 iff 0) 52 addi \bit, \bit, WSBITS - 32 + 1 # uppest bit set -> return 1 53#else 54 movi \bit, WSBITS 55#if WSBITS > 16 56 _bltui \mask, 0x10000, 99f 57 addi \bit, \bit, -16 58 extui \mask, \mask, 16, 16 59#endif 60#if WSBITS > 8 6199: _bltui \mask, 0x100, 99f 62 addi \bit, \bit, -8 63 srli \mask, \mask, 8 64#endif 6599: _bltui \mask, 0x10, 99f 66 addi \bit, \bit, -4 67 srli \mask, \mask, 4 6899: _bltui \mask, 0x4, 99f 69 addi \bit, \bit, -2 70 srli \mask, \mask, 2 7199: _bltui \mask, 0x2, 99f 72 addi \bit, \bit, -1 7399: 74 75#endif 76 .endm 77 78 79 .macro irq_save flags tmp 80#if XTENSA_FAKE_NMI 81#if defined(CONFIG_DEBUG_KERNEL) && (LOCKLEVEL | TOPLEVEL) >= XCHAL_DEBUGLEVEL 82 rsr \flags, ps 83 extui \tmp, \flags, PS_INTLEVEL_SHIFT, PS_INTLEVEL_WIDTH 84 bgei \tmp, LOCKLEVEL, 99f 85 rsil \tmp, LOCKLEVEL 8699: 87#else 88 movi \tmp, LOCKLEVEL 89 rsr \flags, ps 90 or \flags, \flags, \tmp 91 xsr \flags, ps 92 rsync 93#endif 94#else 95 rsil \flags, LOCKLEVEL 96#endif 97 .endm 98 99/* ----------------- DEFAULT FIRST LEVEL EXCEPTION HANDLERS ----------------- */ 100 101/* 102 * First-level exception handler for user exceptions. 103 * Save some special registers, extra states and all registers in the AR 104 * register file that were in use in the user task, and jump to the common 105 * exception code. 106 * We save SAR (used to calculate WMASK), and WB and WS (we don't have to 107 * save them for kernel exceptions). 108 * 109 * Entry condition for user_exception: 110 * 111 * a0: trashed, original value saved on stack (PT_AREG0) 112 * a1: a1 113 * a2: new stack pointer, original value in depc 114 * a3: a3 115 * depc: a2, original value saved on stack (PT_DEPC) 116 * excsave1: dispatch table 117 * 118 * PT_DEPC >= VALID_DOUBLE_EXCEPTION_ADDRESS: double exception, DEPC 119 * < VALID_DOUBLE_EXCEPTION_ADDRESS: regular exception 120 * 121 * Entry condition for _user_exception: 122 * 123 * a0-a3 and depc have been saved to PT_AREG0...PT_AREG3 and PT_DEPC 124 * excsave has been restored, and 125 * stack pointer (a1) has been set. 126 * 127 * Note: _user_exception might be at an odd address. Don't use call0..call12 128 */ 129 .literal_position 130 131ENTRY(user_exception) 132 133 /* Save a1, a2, a3, and set SP. */ 134 135 rsr a0, depc 136 s32i a1, a2, PT_AREG1 137 s32i a0, a2, PT_AREG2 138 s32i a3, a2, PT_AREG3 139 mov a1, a2 140 141 .globl _user_exception 142_user_exception: 143 144 /* Save SAR and turn off single stepping */ 145 146 movi a2, 0 147 wsr a2, depc # terminate user stack trace with 0 148 rsr a3, sar 149 xsr a2, icountlevel 150 s32i a3, a1, PT_SAR 151 s32i a2, a1, PT_ICOUNTLEVEL 152 153#if XCHAL_HAVE_THREADPTR 154 rur a2, threadptr 155 s32i a2, a1, PT_THREADPTR 156#endif 157 158 /* Rotate ws so that the current windowbase is at bit0. */ 159 /* Assume ws = xxwww1yyyy. Rotate ws right, so that a2 = yyyyxxwww1 */ 160 161#if defined(USER_SUPPORT_WINDOWED) 162 rsr a2, windowbase 163 rsr a3, windowstart 164 ssr a2 165 s32i a2, a1, PT_WINDOWBASE 166 s32i a3, a1, PT_WINDOWSTART 167 slli a2, a3, 32-WSBITS 168 src a2, a3, a2 169 srli a2, a2, 32-WSBITS 170 s32i a2, a1, PT_WMASK # needed for restoring registers 171#else 172 movi a2, 0 173 movi a3, 1 174 s32i a2, a1, PT_WINDOWBASE 175 s32i a3, a1, PT_WINDOWSTART 176 s32i a3, a1, PT_WMASK 177#endif 178 179 /* Save only live registers. */ 180 181UABI_W _bbsi.l a2, 1, 1f 182 s32i a4, a1, PT_AREG4 183 s32i a5, a1, PT_AREG5 184 s32i a6, a1, PT_AREG6 185 s32i a7, a1, PT_AREG7 186UABI_W _bbsi.l a2, 2, 1f 187 s32i a8, a1, PT_AREG8 188 s32i a9, a1, PT_AREG9 189 s32i a10, a1, PT_AREG10 190 s32i a11, a1, PT_AREG11 191UABI_W _bbsi.l a2, 3, 1f 192 s32i a12, a1, PT_AREG12 193 s32i a13, a1, PT_AREG13 194 s32i a14, a1, PT_AREG14 195 s32i a15, a1, PT_AREG15 196 197#if defined(USER_SUPPORT_WINDOWED) 198 _bnei a2, 1, 1f # only one valid frame? 199 200 /* Only one valid frame, skip saving regs. */ 201 202 j 2f 203 204 /* Save the remaining registers. 205 * We have to save all registers up to the first '1' from 206 * the right, except the current frame (bit 0). 207 * Assume a2 is: 001001000110001 208 * All register frames starting from the top field to the marked '1' 209 * must be saved. 210 */ 211 2121: addi a3, a2, -1 # eliminate '1' in bit 0: yyyyxxww0 213 neg a3, a3 # yyyyxxww0 -> YYYYXXWW1+1 214 and a3, a3, a2 # max. only one bit is set 215 216 /* Find number of frames to save */ 217 218 ffs_ws a0, a3 # number of frames to the '1' from left 219 220 /* Store information into WMASK: 221 * bits 0..3: xxx1 masked lower 4 bits of the rotated windowstart, 222 * bits 4...: number of valid 4-register frames 223 */ 224 225 slli a3, a0, 4 # number of frames to save in bits 8..4 226 extui a2, a2, 0, 4 # mask for the first 16 registers 227 or a2, a3, a2 228 s32i a2, a1, PT_WMASK # needed when we restore the reg-file 229 230 /* Save 4 registers at a time */ 231 2321: rotw -1 233 s32i a0, a5, PT_AREG_END - 16 234 s32i a1, a5, PT_AREG_END - 12 235 s32i a2, a5, PT_AREG_END - 8 236 s32i a3, a5, PT_AREG_END - 4 237 addi a0, a4, -1 238 addi a1, a5, -16 239 _bnez a0, 1b 240 241 /* WINDOWBASE still in SAR! */ 242 243 rsr a2, sar # original WINDOWBASE 244 movi a3, 1 245 ssl a2 246 sll a3, a3 247 wsr a3, windowstart # set corresponding WINDOWSTART bit 248 wsr a2, windowbase # and WINDOWSTART 249 rsync 250 251 /* We are back to the original stack pointer (a1) */ 252#endif 2532: /* Now, jump to the common exception handler. */ 254 255 j common_exception 256 257ENDPROC(user_exception) 258 259/* 260 * First-level exit handler for kernel exceptions 261 * Save special registers and the live window frame. 262 * Note: Even though we changes the stack pointer, we don't have to do a 263 * MOVSP here, as we do that when we return from the exception. 264 * (See comment in the kernel exception exit code) 265 * 266 * Entry condition for kernel_exception: 267 * 268 * a0: trashed, original value saved on stack (PT_AREG0) 269 * a1: a1 270 * a2: new stack pointer, original in DEPC 271 * a3: a3 272 * depc: a2, original value saved on stack (PT_DEPC) 273 * excsave_1: dispatch table 274 * 275 * PT_DEPC >= VALID_DOUBLE_EXCEPTION_ADDRESS: double exception, DEPC 276 * < VALID_DOUBLE_EXCEPTION_ADDRESS: regular exception 277 * 278 * Entry condition for _kernel_exception: 279 * 280 * a0-a3 and depc have been saved to PT_AREG0...PT_AREG3 and PT_DEPC 281 * excsave has been restored, and 282 * stack pointer (a1) has been set. 283 * 284 * Note: _kernel_exception might be at an odd address. Don't use call0..call12 285 */ 286 287ENTRY(kernel_exception) 288 289 /* Save a1, a2, a3, and set SP. */ 290 291 rsr a0, depc # get a2 292 s32i a1, a2, PT_AREG1 293 s32i a0, a2, PT_AREG2 294 s32i a3, a2, PT_AREG3 295 mov a1, a2 296 297 .globl _kernel_exception 298_kernel_exception: 299 300 /* Save SAR and turn off single stepping */ 301 302 movi a2, 0 303 rsr a3, sar 304 xsr a2, icountlevel 305 s32i a3, a1, PT_SAR 306 s32i a2, a1, PT_ICOUNTLEVEL 307 308#if defined(__XTENSA_WINDOWED_ABI__) 309 /* Rotate ws so that the current windowbase is at bit0. */ 310 /* Assume ws = xxwww1yyyy. Rotate ws right, so that a2 = yyyyxxwww1 */ 311 312 rsr a2, windowbase # don't need to save these, we only 313 rsr a3, windowstart # need shifted windowstart: windowmask 314 ssr a2 315 slli a2, a3, 32-WSBITS 316 src a2, a3, a2 317 srli a2, a2, 32-WSBITS 318 s32i a2, a1, PT_WMASK # needed for kernel_exception_exit 319#endif 320 321 /* Save only the live window-frame */ 322 323KABI_W _bbsi.l a2, 1, 1f 324 s32i a4, a1, PT_AREG4 325 s32i a5, a1, PT_AREG5 326 s32i a6, a1, PT_AREG6 327 s32i a7, a1, PT_AREG7 328KABI_W _bbsi.l a2, 2, 1f 329 s32i a8, a1, PT_AREG8 330 s32i a9, a1, PT_AREG9 331 s32i a10, a1, PT_AREG10 332 s32i a11, a1, PT_AREG11 333KABI_W _bbsi.l a2, 3, 1f 334 s32i a12, a1, PT_AREG12 335 s32i a13, a1, PT_AREG13 336 s32i a14, a1, PT_AREG14 337 s32i a15, a1, PT_AREG15 338 339#ifdef __XTENSA_WINDOWED_ABI__ 340 _bnei a2, 1, 1f 341 /* Copy spill slots of a0 and a1 to imitate movsp 342 * in order to keep exception stack continuous 343 */ 344 l32i a3, a1, PT_KERNEL_SIZE 345 l32i a0, a1, PT_KERNEL_SIZE + 4 346 s32e a3, a1, -16 347 s32e a0, a1, -12 348#endif 3491: 350 l32i a0, a1, PT_AREG0 # restore saved a0 351 wsr a0, depc 352 353#ifdef KERNEL_STACK_OVERFLOW_CHECK 354 355 /* Stack overflow check, for debugging */ 356 extui a2, a1, TASK_SIZE_BITS,XX 357 movi a3, SIZE?? 358 _bge a2, a3, out_of_stack_panic 359 360#endif 361 362/* 363 * This is the common exception handler. 364 * We get here from the user exception handler or simply by falling through 365 * from the kernel exception handler. 366 * Save the remaining special registers, switch to kernel mode, and jump 367 * to the second-level exception handler. 368 * 369 */ 370 371common_exception: 372 373 /* Save some registers, disable loops and clear the syscall flag. */ 374 375 rsr a2, debugcause 376 rsr a3, epc1 377 s32i a2, a1, PT_DEBUGCAUSE 378 s32i a3, a1, PT_PC 379 380 movi a2, NO_SYSCALL 381 rsr a3, excvaddr 382 s32i a2, a1, PT_SYSCALL 383 movi a2, 0 384 s32i a3, a1, PT_EXCVADDR 385#if XCHAL_HAVE_LOOPS 386 xsr a2, lcount 387 s32i a2, a1, PT_LCOUNT 388#endif 389 390#if XCHAL_HAVE_EXCLUSIVE 391 /* Clear exclusive access monitor set by interrupted code */ 392 clrex 393#endif 394 395 /* It is now save to restore the EXC_TABLE_FIXUP variable. */ 396 397 rsr a2, exccause 398 movi a3, 0 399 rsr a0, excsave1 400 s32i a2, a1, PT_EXCCAUSE 401 s32i a3, a0, EXC_TABLE_FIXUP 402 403 /* All unrecoverable states are saved on stack, now, and a1 is valid. 404 * Now we can allow exceptions again. In case we've got an interrupt 405 * PS.INTLEVEL is set to LOCKLEVEL disabling furhter interrupts, 406 * otherwise it's left unchanged. 407 * 408 * Set PS(EXCM = 0, UM = 0, RING = 0, OWB = 0, WOE = 1, INTLEVEL = X) 409 */ 410 411 rsr a3, ps 412 s32i a3, a1, PT_PS # save ps 413 414#if XTENSA_FAKE_NMI 415 /* Correct PS needs to be saved in the PT_PS: 416 * - in case of exception or level-1 interrupt it's in the PS, 417 * and is already saved. 418 * - in case of medium level interrupt it's in the excsave2. 419 */ 420 movi a0, EXCCAUSE_MAPPED_NMI 421 extui a3, a3, PS_INTLEVEL_SHIFT, PS_INTLEVEL_WIDTH 422 beq a2, a0, .Lmedium_level_irq 423 bnei a2, EXCCAUSE_LEVEL1_INTERRUPT, .Lexception 424 beqz a3, .Llevel1_irq # level-1 IRQ sets ps.intlevel to 0 425 426.Lmedium_level_irq: 427 rsr a0, excsave2 428 s32i a0, a1, PT_PS # save medium-level interrupt ps 429 bgei a3, LOCKLEVEL, .Lexception 430 431.Llevel1_irq: 432 movi a3, LOCKLEVEL 433 434.Lexception: 435KABI_W movi a0, PS_WOE_MASK 436KABI_W or a3, a3, a0 437#else 438 addi a2, a2, -EXCCAUSE_LEVEL1_INTERRUPT 439 movi a0, LOCKLEVEL 440 extui a3, a3, PS_INTLEVEL_SHIFT, PS_INTLEVEL_WIDTH 441 # a3 = PS.INTLEVEL 442 moveqz a3, a0, a2 # a3 = LOCKLEVEL iff interrupt 443KABI_W movi a2, PS_WOE_MASK 444KABI_W or a3, a3, a2 445 rsr a2, exccause 446#endif 447 448 /* restore return address (or 0 if return to userspace) */ 449 rsr a0, depc 450 wsr a3, ps 451 rsync # PS.WOE => rsync => overflow 452 453 /* Save lbeg, lend */ 454#if XCHAL_HAVE_LOOPS 455 rsr a4, lbeg 456 rsr a3, lend 457 s32i a4, a1, PT_LBEG 458 s32i a3, a1, PT_LEND 459#endif 460 461 /* Save SCOMPARE1 */ 462 463#if XCHAL_HAVE_S32C1I 464 rsr a3, scompare1 465 s32i a3, a1, PT_SCOMPARE1 466#endif 467 468 /* Save optional registers. */ 469 470 save_xtregs_opt a1 a3 a4 a5 a6 a7 PT_XTREGS_OPT 471 472 /* Go to second-level dispatcher. Set up parameters to pass to the 473 * exception handler and call the exception handler. 474 */ 475 476 rsr a4, excsave1 477 addx4 a4, a2, a4 478 l32i a4, a4, EXC_TABLE_DEFAULT # load handler 479 mov abi_arg1, a2 # pass EXCCAUSE 480 mov abi_arg0, a1 # pass stack frame 481 482 /* Call the second-level handler */ 483 484 abi_callx a4 485 486 /* Jump here for exception exit */ 487 .global common_exception_return 488common_exception_return: 489 490#if XTENSA_FAKE_NMI 491 l32i abi_tmp0, a1, PT_EXCCAUSE 492 movi abi_tmp1, EXCCAUSE_MAPPED_NMI 493 l32i abi_saved1, a1, PT_PS 494 beq abi_tmp0, abi_tmp1, .Lrestore_state 495#endif 496.Ltif_loop: 497 irq_save a2, a3 498#ifdef CONFIG_TRACE_IRQFLAGS 499 abi_call trace_hardirqs_off 500#endif 501 502 /* Jump if we are returning from kernel exceptions. */ 503 504 l32i abi_saved1, a1, PT_PS 505 GET_THREAD_INFO(a2, a1) 506 l32i a4, a2, TI_FLAGS 507 _bbci.l abi_saved1, PS_UM_BIT, .Lexit_tif_loop_kernel 508 509 /* Specific to a user exception exit: 510 * We need to check some flags for signal handling and rescheduling, 511 * and have to restore WB and WS, extra states, and all registers 512 * in the register file that were in use in the user task. 513 * Note that we don't disable interrupts here. 514 */ 515 516 _bbsi.l a4, TIF_NEED_RESCHED, .Lresched 517 movi a2, _TIF_SIGPENDING | _TIF_NOTIFY_RESUME | _TIF_NOTIFY_SIGNAL 518 bnone a4, a2, .Lexit_tif_loop_user 519 520 l32i a4, a1, PT_DEPC 521 bgeui a4, VALID_DOUBLE_EXCEPTION_ADDRESS, .Lrestore_state 522 523 /* Call do_signal() */ 524 525#ifdef CONFIG_TRACE_IRQFLAGS 526 abi_call trace_hardirqs_on 527#endif 528 rsil a2, 0 529 mov abi_arg0, a1 530 abi_call do_notify_resume # int do_notify_resume(struct pt_regs*) 531 j .Ltif_loop 532 533.Lresched: 534#ifdef CONFIG_TRACE_IRQFLAGS 535 abi_call trace_hardirqs_on 536#endif 537 rsil a2, 0 538 abi_call schedule # void schedule (void) 539 j .Ltif_loop 540 541.Lexit_tif_loop_kernel: 542#ifdef CONFIG_PREEMPTION 543 _bbci.l a4, TIF_NEED_RESCHED, .Lrestore_state 544 545 /* Check current_thread_info->preempt_count */ 546 547 l32i a4, a2, TI_PRE_COUNT 548 bnez a4, .Lrestore_state 549 abi_call preempt_schedule_irq 550#endif 551 j .Lrestore_state 552 553.Lexit_tif_loop_user: 554#ifdef CONFIG_HAVE_HW_BREAKPOINT 555 _bbci.l a4, TIF_DB_DISABLED, 1f 556 abi_call restore_dbreak 5571: 558#endif 559#ifdef CONFIG_DEBUG_TLB_SANITY 560 l32i a4, a1, PT_DEPC 561 bgeui a4, VALID_DOUBLE_EXCEPTION_ADDRESS, .Lrestore_state 562 abi_call check_tlb_sanity 563#endif 564 565.Lrestore_state: 566#ifdef CONFIG_TRACE_IRQFLAGS 567 extui a4, abi_saved1, PS_INTLEVEL_SHIFT, PS_INTLEVEL_WIDTH 568 bgei a4, LOCKLEVEL, 1f 569 abi_call trace_hardirqs_on 5701: 571#endif 572 /* Restore optional registers. */ 573 574 load_xtregs_opt a1 a2 a4 a5 a6 a7 PT_XTREGS_OPT 575 576 /* Restore SCOMPARE1 */ 577 578#if XCHAL_HAVE_S32C1I 579 l32i a2, a1, PT_SCOMPARE1 580 wsr a2, scompare1 581#endif 582 wsr abi_saved1, ps /* disable interrupts */ 583 584 _bbci.l abi_saved1, PS_UM_BIT, kernel_exception_exit 585 586user_exception_exit: 587 588 /* Restore the state of the task and return from the exception. */ 589 590#if defined(USER_SUPPORT_WINDOWED) 591 /* Switch to the user thread WINDOWBASE. Save SP temporarily in DEPC */ 592 593 l32i a2, a1, PT_WINDOWBASE 594 l32i a3, a1, PT_WINDOWSTART 595 wsr a1, depc # use DEPC as temp storage 596 wsr a3, windowstart # restore WINDOWSTART 597 ssr a2 # preserve user's WB in the SAR 598 wsr a2, windowbase # switch to user's saved WB 599 rsync 600 rsr a1, depc # restore stack pointer 601 l32i a2, a1, PT_WMASK # register frames saved (in bits 4...9) 602 rotw -1 # we restore a4..a7 603 _bltui a6, 16, .Lclear_regs # only have to restore current window? 604 605 /* The working registers are a0 and a3. We are restoring to 606 * a4..a7. Be careful not to destroy what we have just restored. 607 * Note: wmask has the format YYYYM: 608 * Y: number of registers saved in groups of 4 609 * M: 4 bit mask of first 16 registers 610 */ 611 612 mov a2, a6 613 mov a3, a5 614 6151: rotw -1 # a0..a3 become a4..a7 616 addi a3, a7, -4*4 # next iteration 617 addi a2, a6, -16 # decrementing Y in WMASK 618 l32i a4, a3, PT_AREG_END + 0 619 l32i a5, a3, PT_AREG_END + 4 620 l32i a6, a3, PT_AREG_END + 8 621 l32i a7, a3, PT_AREG_END + 12 622 _bgeui a2, 16, 1b 623 624 /* Clear unrestored registers (don't leak anything to user-land */ 625 626.Lclear_regs: 627 rsr a0, windowbase 628 rsr a3, sar 629 sub a3, a0, a3 630 beqz a3, 2f 631 extui a3, a3, 0, WBBITS 632 6331: rotw -1 634 addi a3, a7, -1 635 movi a4, 0 636 movi a5, 0 637 movi a6, 0 638 movi a7, 0 639 bgei a3, 1, 1b 640 641 /* We are back were we were when we started. 642 * Note: a2 still contains WMASK (if we've returned to the original 643 * frame where we had loaded a2), or at least the lower 4 bits 644 * (if we have restored WSBITS-1 frames). 645 */ 6462: 647#else 648 movi a2, 1 649#endif 650#if XCHAL_HAVE_THREADPTR 651 l32i a3, a1, PT_THREADPTR 652 wur a3, threadptr 653#endif 654 655 j common_exception_exit 656 657 /* This is the kernel exception exit. 658 * We avoided to do a MOVSP when we entered the exception, but we 659 * have to do it here. 660 */ 661 662kernel_exception_exit: 663 664#if defined(__XTENSA_WINDOWED_ABI__) 665 /* Check if we have to do a movsp. 666 * 667 * We only have to do a movsp if the previous window-frame has 668 * been spilled to the *temporary* exception stack instead of the 669 * task's stack. This is the case if the corresponding bit in 670 * WINDOWSTART for the previous window-frame was set before 671 * (not spilled) but is zero now (spilled). 672 * If this bit is zero, all other bits except the one for the 673 * current window frame are also zero. So, we can use a simple test: 674 * 'and' WINDOWSTART and WINDOWSTART-1: 675 * 676 * (XXXXXX1[0]* - 1) AND XXXXXX1[0]* = XXXXXX0[0]* 677 * 678 * The result is zero only if one bit was set. 679 * 680 * (Note: We might have gone through several task switches before 681 * we come back to the current task, so WINDOWBASE might be 682 * different from the time the exception occurred.) 683 */ 684 685 /* Test WINDOWSTART before and after the exception. 686 * We actually have WMASK, so we only have to test if it is 1 or not. 687 */ 688 689 l32i a2, a1, PT_WMASK 690 _beqi a2, 1, common_exception_exit # Spilled before exception,jump 691 692 /* Test WINDOWSTART now. If spilled, do the movsp */ 693 694 rsr a3, windowstart 695 addi a0, a3, -1 696 and a3, a3, a0 697 _bnez a3, common_exception_exit 698 699 /* Do a movsp (we returned from a call4, so we have at least a0..a7) */ 700 701 addi a0, a1, -16 702 l32i a3, a0, 0 703 l32i a4, a0, 4 704 s32i a3, a1, PT_KERNEL_SIZE + 0 705 s32i a4, a1, PT_KERNEL_SIZE + 4 706 l32i a3, a0, 8 707 l32i a4, a0, 12 708 s32i a3, a1, PT_KERNEL_SIZE + 8 709 s32i a4, a1, PT_KERNEL_SIZE + 12 710 711 /* Common exception exit. 712 * We restore the special register and the current window frame, and 713 * return from the exception. 714 * 715 * Note: We expect a2 to hold PT_WMASK 716 */ 717#else 718 movi a2, 1 719#endif 720 721common_exception_exit: 722 723 /* Restore address registers. */ 724 725 _bbsi.l a2, 1, 1f 726 l32i a4, a1, PT_AREG4 727 l32i a5, a1, PT_AREG5 728 l32i a6, a1, PT_AREG6 729 l32i a7, a1, PT_AREG7 730 _bbsi.l a2, 2, 1f 731 l32i a8, a1, PT_AREG8 732 l32i a9, a1, PT_AREG9 733 l32i a10, a1, PT_AREG10 734 l32i a11, a1, PT_AREG11 735 _bbsi.l a2, 3, 1f 736 l32i a12, a1, PT_AREG12 737 l32i a13, a1, PT_AREG13 738 l32i a14, a1, PT_AREG14 739 l32i a15, a1, PT_AREG15 740 741 /* Restore PC, SAR */ 742 7431: l32i a2, a1, PT_PC 744 l32i a3, a1, PT_SAR 745 wsr a2, epc1 746 wsr a3, sar 747 748 /* Restore LBEG, LEND, LCOUNT */ 749#if XCHAL_HAVE_LOOPS 750 l32i a2, a1, PT_LBEG 751 l32i a3, a1, PT_LEND 752 wsr a2, lbeg 753 l32i a2, a1, PT_LCOUNT 754 wsr a3, lend 755 wsr a2, lcount 756#endif 757 758 /* We control single stepping through the ICOUNTLEVEL register. */ 759 760 l32i a2, a1, PT_ICOUNTLEVEL 761 movi a3, -2 762 wsr a2, icountlevel 763 wsr a3, icount 764 765 /* Check if it was double exception. */ 766 767 l32i a0, a1, PT_DEPC 768 l32i a3, a1, PT_AREG3 769 l32i a2, a1, PT_AREG2 770 _bgeui a0, VALID_DOUBLE_EXCEPTION_ADDRESS, 1f 771 772 /* Restore a0...a3 and return */ 773 774 l32i a0, a1, PT_AREG0 775 l32i a1, a1, PT_AREG1 776 rfe 777 7781: wsr a0, depc 779 l32i a0, a1, PT_AREG0 780 l32i a1, a1, PT_AREG1 781 rfde 782 783ENDPROC(kernel_exception) 784 785/* 786 * Debug exception handler. 787 * 788 * Currently, we don't support KGDB, so only user application can be debugged. 789 * 790 * When we get here, a0 is trashed and saved to excsave[debuglevel] 791 */ 792 793 .literal_position 794 795ENTRY(debug_exception) 796 797 rsr a0, SREG_EPS + XCHAL_DEBUGLEVEL 798 bbsi.l a0, PS_EXCM_BIT, 1f # exception mode 799 800 /* Set EPC1 and EXCCAUSE */ 801 802 wsr a2, depc # save a2 temporarily 803 rsr a2, SREG_EPC + XCHAL_DEBUGLEVEL 804 wsr a2, epc1 805 806 movi a2, EXCCAUSE_MAPPED_DEBUG 807 wsr a2, exccause 808 809 /* Restore PS to the value before the debug exc but with PS.EXCM set.*/ 810 811 movi a2, 1 << PS_EXCM_BIT 812 or a2, a0, a2 813 wsr a2, ps 814 815 /* Switch to kernel/user stack, restore jump vector, and save a0 */ 816 817 bbsi.l a2, PS_UM_BIT, 2f # jump if user mode 818 819 addi a2, a1, -16 - PT_KERNEL_SIZE # assume kernel stack 8203: 821 l32i a0, a3, DT_DEBUG_SAVE 822 s32i a1, a2, PT_AREG1 823 s32i a0, a2, PT_AREG0 824 movi a0, 0 825 s32i a0, a2, PT_DEPC # mark it as a regular exception 826 xsr a3, SREG_EXCSAVE + XCHAL_DEBUGLEVEL 827 xsr a0, depc 828 s32i a3, a2, PT_AREG3 829 s32i a0, a2, PT_AREG2 830 mov a1, a2 831 832 /* Debug exception is handled as an exception, so interrupts will 833 * likely be enabled in the common exception handler. Disable 834 * preemption if we have HW breakpoints to preserve DEBUGCAUSE.DBNUM 835 * meaning. 836 */ 837#if defined(CONFIG_PREEMPT_COUNT) && defined(CONFIG_HAVE_HW_BREAKPOINT) 838 GET_THREAD_INFO(a2, a1) 839 l32i a3, a2, TI_PRE_COUNT 840 addi a3, a3, 1 841 s32i a3, a2, TI_PRE_COUNT 842#endif 843 844 rsr a2, ps 845 bbsi.l a2, PS_UM_BIT, _user_exception 846 j _kernel_exception 847 8482: rsr a2, excsave1 849 l32i a2, a2, EXC_TABLE_KSTK # load kernel stack pointer 850 j 3b 851 852#ifdef CONFIG_HAVE_HW_BREAKPOINT 853 /* Debug exception while in exception mode. This may happen when 854 * window overflow/underflow handler or fast exception handler hits 855 * data breakpoint, in which case save and disable all data 856 * breakpoints, single-step faulting instruction and restore data 857 * breakpoints. 858 */ 8591: 860 bbci.l a0, PS_UM_BIT, 1b # jump if kernel mode 861 862 rsr a0, debugcause 863 bbsi.l a0, DEBUGCAUSE_DBREAK_BIT, .Ldebug_save_dbreak 864 865 .set _index, 0 866 .rept XCHAL_NUM_DBREAK 867 l32i a0, a3, DT_DBREAKC_SAVE + _index * 4 868 wsr a0, SREG_DBREAKC + _index 869 .set _index, _index + 1 870 .endr 871 872 l32i a0, a3, DT_ICOUNT_LEVEL_SAVE 873 wsr a0, icountlevel 874 875 l32i a0, a3, DT_ICOUNT_SAVE 876 xsr a0, icount 877 878 l32i a0, a3, DT_DEBUG_SAVE 879 xsr a3, SREG_EXCSAVE + XCHAL_DEBUGLEVEL 880 rfi XCHAL_DEBUGLEVEL 881 882.Ldebug_save_dbreak: 883 .set _index, 0 884 .rept XCHAL_NUM_DBREAK 885 movi a0, 0 886 xsr a0, SREG_DBREAKC + _index 887 s32i a0, a3, DT_DBREAKC_SAVE + _index * 4 888 .set _index, _index + 1 889 .endr 890 891 movi a0, XCHAL_EXCM_LEVEL + 1 892 xsr a0, icountlevel 893 s32i a0, a3, DT_ICOUNT_LEVEL_SAVE 894 895 movi a0, 0xfffffffe 896 xsr a0, icount 897 s32i a0, a3, DT_ICOUNT_SAVE 898 899 l32i a0, a3, DT_DEBUG_SAVE 900 xsr a3, SREG_EXCSAVE + XCHAL_DEBUGLEVEL 901 rfi XCHAL_DEBUGLEVEL 902#else 903 /* Debug exception while in exception mode. Should not happen. */ 9041: j 1b // FIXME!! 905#endif 906 907ENDPROC(debug_exception) 908 909/* 910 * We get here in case of an unrecoverable exception. 911 * The only thing we can do is to be nice and print a panic message. 912 * We only produce a single stack frame for panic, so ??? 913 * 914 * 915 * Entry conditions: 916 * 917 * - a0 contains the caller address; original value saved in excsave1. 918 * - the original a0 contains a valid return address (backtrace) or 0. 919 * - a2 contains a valid stackpointer 920 * 921 * Notes: 922 * 923 * - If the stack pointer could be invalid, the caller has to setup a 924 * dummy stack pointer (e.g. the stack of the init_task) 925 * 926 * - If the return address could be invalid, the caller has to set it 927 * to 0, so the backtrace would stop. 928 * 929 */ 930 .align 4 931unrecoverable_text: 932 .ascii "Unrecoverable error in exception handler\0" 933 934 .literal_position 935 936ENTRY(unrecoverable_exception) 937 938#if XCHAL_HAVE_WINDOWED 939 movi a0, 1 940 movi a1, 0 941 942 wsr a0, windowstart 943 wsr a1, windowbase 944 rsync 945#endif 946 947 movi a1, KERNEL_PS_WOE_MASK | LOCKLEVEL 948 wsr a1, ps 949 rsync 950 951 movi a1, init_task 952 movi a0, 0 953 addi a1, a1, PT_REGS_OFFSET 954 955 movi abi_arg0, unrecoverable_text 956 abi_call panic 957 9581: j 1b 959 960ENDPROC(unrecoverable_exception) 961 962/* -------------------------- FAST EXCEPTION HANDLERS ----------------------- */ 963 964 __XTENSA_HANDLER 965 .literal_position 966 967#ifdef SUPPORT_WINDOWED 968/* 969 * Fast-handler for alloca exceptions 970 * 971 * The ALLOCA handler is entered when user code executes the MOVSP 972 * instruction and the caller's frame is not in the register file. 973 * 974 * This algorithm was taken from the Ross Morley's RTOS Porting Layer: 975 * 976 * /home/ross/rtos/porting/XtensaRTOS-PortingLayer-20090507/xtensa_vectors.S 977 * 978 * It leverages the existing window spill/fill routines and their support for 979 * double exceptions. The 'movsp' instruction will only cause an exception if 980 * the next window needs to be loaded. In fact this ALLOCA exception may be 981 * replaced at some point by changing the hardware to do a underflow exception 982 * of the proper size instead. 983 * 984 * This algorithm simply backs out the register changes started by the user 985 * exception handler, makes it appear that we have started a window underflow 986 * by rotating the window back and then setting the old window base (OWB) in 987 * the 'ps' register with the rolled back window base. The 'movsp' instruction 988 * will be re-executed and this time since the next window frames is in the 989 * active AR registers it won't cause an exception. 990 * 991 * If the WindowUnderflow code gets a TLB miss the page will get mapped 992 * the partial WindowUnderflow will be handled in the double exception 993 * handler. 994 * 995 * Entry condition: 996 * 997 * a0: trashed, original value saved on stack (PT_AREG0) 998 * a1: a1 999 * a2: new stack pointer, original in DEPC 1000 * a3: a3 1001 * depc: a2, original value saved on stack (PT_DEPC) 1002 * excsave_1: dispatch table 1003 * 1004 * PT_DEPC >= VALID_DOUBLE_EXCEPTION_ADDRESS: double exception, DEPC 1005 * < VALID_DOUBLE_EXCEPTION_ADDRESS: regular exception 1006 */ 1007 1008ENTRY(fast_alloca) 1009 rsr a0, windowbase 1010 rotw -1 1011 rsr a2, ps 1012 extui a3, a2, PS_OWB_SHIFT, PS_OWB_WIDTH 1013 xor a3, a3, a4 1014 l32i a4, a6, PT_AREG0 1015 l32i a1, a6, PT_DEPC 1016 rsr a6, depc 1017 wsr a1, depc 1018 slli a3, a3, PS_OWB_SHIFT 1019 xor a2, a2, a3 1020 wsr a2, ps 1021 rsync 1022 1023 _bbci.l a4, 31, 4f 1024 rotw -1 1025 _bbci.l a8, 30, 8f 1026 rotw -1 1027 j _WindowUnderflow12 10288: j _WindowUnderflow8 10294: j _WindowUnderflow4 1030ENDPROC(fast_alloca) 1031#endif 1032 1033#ifdef CONFIG_USER_ABI_CALL0_PROBE 1034/* 1035 * fast illegal instruction handler. 1036 * 1037 * This is used to fix up user PS.WOE on the exception caused 1038 * by the first opcode related to register window. If PS.WOE is 1039 * already set it goes directly to the common user exception handler. 1040 * 1041 * Entry condition: 1042 * 1043 * a0: trashed, original value saved on stack (PT_AREG0) 1044 * a1: a1 1045 * a2: new stack pointer, original in DEPC 1046 * a3: a3 1047 * depc: a2, original value saved on stack (PT_DEPC) 1048 * excsave_1: dispatch table 1049 */ 1050 1051ENTRY(fast_illegal_instruction_user) 1052 1053 rsr a0, ps 1054 bbsi.l a0, PS_WOE_BIT, 1f 1055 s32i a3, a2, PT_AREG3 1056 movi a3, PS_WOE_MASK 1057 or a0, a0, a3 1058 wsr a0, ps 1059 l32i a3, a2, PT_AREG3 1060 l32i a0, a2, PT_AREG0 1061 rsr a2, depc 1062 rfe 10631: 1064 call0 user_exception 1065 1066ENDPROC(fast_illegal_instruction_user) 1067#endif 1068 1069 /* 1070 * fast system calls. 1071 * 1072 * WARNING: The kernel doesn't save the entire user context before 1073 * handling a fast system call. These functions are small and short, 1074 * usually offering some functionality not available to user tasks. 1075 * 1076 * BE CAREFUL TO PRESERVE THE USER'S CONTEXT. 1077 * 1078 * Entry condition: 1079 * 1080 * a0: trashed, original value saved on stack (PT_AREG0) 1081 * a1: a1 1082 * a2: new stack pointer, original in DEPC 1083 * a3: a3 1084 * depc: a2, original value saved on stack (PT_DEPC) 1085 * excsave_1: dispatch table 1086 */ 1087 1088ENTRY(fast_syscall_user) 1089 1090 /* Skip syscall. */ 1091 1092 rsr a0, epc1 1093 addi a0, a0, 3 1094 wsr a0, epc1 1095 1096 l32i a0, a2, PT_DEPC 1097 bgeui a0, VALID_DOUBLE_EXCEPTION_ADDRESS, fast_syscall_unrecoverable 1098 1099 rsr a0, depc # get syscall-nr 1100 _beqz a0, fast_syscall_spill_registers 1101 _beqi a0, __NR_xtensa, fast_syscall_xtensa 1102 1103 call0 user_exception 1104 1105ENDPROC(fast_syscall_user) 1106 1107ENTRY(fast_syscall_unrecoverable) 1108 1109 /* Restore all states. */ 1110 1111 l32i a0, a2, PT_AREG0 # restore a0 1112 xsr a2, depc # restore a2, depc 1113 1114 wsr a0, excsave1 1115 call0 unrecoverable_exception 1116 1117ENDPROC(fast_syscall_unrecoverable) 1118 1119/* 1120 * sysxtensa syscall handler 1121 * 1122 * int sysxtensa (SYS_XTENSA_ATOMIC_SET, ptr, val, unused); 1123 * int sysxtensa (SYS_XTENSA_ATOMIC_ADD, ptr, val, unused); 1124 * int sysxtensa (SYS_XTENSA_ATOMIC_EXG_ADD, ptr, val, unused); 1125 * int sysxtensa (SYS_XTENSA_ATOMIC_CMP_SWP, ptr, oldval, newval); 1126 * a2 a6 a3 a4 a5 1127 * 1128 * Entry condition: 1129 * 1130 * a0: a2 (syscall-nr), original value saved on stack (PT_AREG0) 1131 * a1: a1 1132 * a2: new stack pointer, original in a0 and DEPC 1133 * a3: a3 1134 * a4..a15: unchanged 1135 * depc: a2, original value saved on stack (PT_DEPC) 1136 * excsave_1: dispatch table 1137 * 1138 * PT_DEPC >= VALID_DOUBLE_EXCEPTION_ADDRESS: double exception, DEPC 1139 * < VALID_DOUBLE_EXCEPTION_ADDRESS: regular exception 1140 * 1141 * Note: we don't have to save a2; a2 holds the return value 1142 */ 1143 1144 .literal_position 1145 1146#ifdef CONFIG_FAST_SYSCALL_XTENSA 1147 1148ENTRY(fast_syscall_xtensa) 1149 1150 s32i a7, a2, PT_AREG7 # we need an additional register 1151 movi a7, 4 # sizeof(unsigned int) 1152 access_ok a3, a7, a0, a2, .Leac # a0: scratch reg, a2: sp 1153 1154 _bgeui a6, SYS_XTENSA_COUNT, .Lill 1155 _bnei a6, SYS_XTENSA_ATOMIC_CMP_SWP, .Lnswp 1156 1157 /* Fall through for ATOMIC_CMP_SWP. */ 1158 1159.Lswp: /* Atomic compare and swap */ 1160 1161EX(.Leac) l32i a0, a3, 0 # read old value 1162 bne a0, a4, 1f # same as old value? jump 1163EX(.Leac) s32i a5, a3, 0 # different, modify value 1164 l32i a7, a2, PT_AREG7 # restore a7 1165 l32i a0, a2, PT_AREG0 # restore a0 1166 movi a2, 1 # and return 1 1167 rfe 1168 11691: l32i a7, a2, PT_AREG7 # restore a7 1170 l32i a0, a2, PT_AREG0 # restore a0 1171 movi a2, 0 # return 0 (note that we cannot set 1172 rfe 1173 1174.Lnswp: /* Atomic set, add, and exg_add. */ 1175 1176EX(.Leac) l32i a7, a3, 0 # orig 1177 addi a6, a6, -SYS_XTENSA_ATOMIC_SET 1178 add a0, a4, a7 # + arg 1179 moveqz a0, a4, a6 # set 1180 addi a6, a6, SYS_XTENSA_ATOMIC_SET 1181EX(.Leac) s32i a0, a3, 0 # write new value 1182 1183 mov a0, a2 1184 mov a2, a7 1185 l32i a7, a0, PT_AREG7 # restore a7 1186 l32i a0, a0, PT_AREG0 # restore a0 1187 rfe 1188 1189.Leac: l32i a7, a2, PT_AREG7 # restore a7 1190 l32i a0, a2, PT_AREG0 # restore a0 1191 movi a2, -EFAULT 1192 rfe 1193 1194.Lill: l32i a7, a2, PT_AREG7 # restore a7 1195 l32i a0, a2, PT_AREG0 # restore a0 1196 movi a2, -EINVAL 1197 rfe 1198 1199ENDPROC(fast_syscall_xtensa) 1200 1201#else /* CONFIG_FAST_SYSCALL_XTENSA */ 1202 1203ENTRY(fast_syscall_xtensa) 1204 1205 l32i a0, a2, PT_AREG0 # restore a0 1206 movi a2, -ENOSYS 1207 rfe 1208 1209ENDPROC(fast_syscall_xtensa) 1210 1211#endif /* CONFIG_FAST_SYSCALL_XTENSA */ 1212 1213 1214/* fast_syscall_spill_registers. 1215 * 1216 * Entry condition: 1217 * 1218 * a0: trashed, original value saved on stack (PT_AREG0) 1219 * a1: a1 1220 * a2: new stack pointer, original in DEPC 1221 * a3: a3 1222 * depc: a2, original value saved on stack (PT_DEPC) 1223 * excsave_1: dispatch table 1224 * 1225 * Note: We assume the stack pointer is EXC_TABLE_KSTK in the fixup handler. 1226 */ 1227 1228#if defined(CONFIG_FAST_SYSCALL_SPILL_REGISTERS) && \ 1229 defined(USER_SUPPORT_WINDOWED) 1230 1231ENTRY(fast_syscall_spill_registers) 1232 1233 /* Register a FIXUP handler (pass current wb as a parameter) */ 1234 1235 xsr a3, excsave1 1236 movi a0, fast_syscall_spill_registers_fixup 1237 s32i a0, a3, EXC_TABLE_FIXUP 1238 rsr a0, windowbase 1239 s32i a0, a3, EXC_TABLE_PARAM 1240 xsr a3, excsave1 # restore a3 and excsave_1 1241 1242 /* Save a3, a4 and SAR on stack. */ 1243 1244 rsr a0, sar 1245 s32i a3, a2, PT_AREG3 1246 s32i a0, a2, PT_SAR 1247 1248 /* The spill routine might clobber a4, a7, a8, a11, a12, and a15. */ 1249 1250 s32i a4, a2, PT_AREG4 1251 s32i a7, a2, PT_AREG7 1252 s32i a8, a2, PT_AREG8 1253 s32i a11, a2, PT_AREG11 1254 s32i a12, a2, PT_AREG12 1255 s32i a15, a2, PT_AREG15 1256 1257 /* 1258 * Rotate ws so that the current windowbase is at bit 0. 1259 * Assume ws = xxxwww1yy (www1 current window frame). 1260 * Rotate ws right so that a4 = yyxxxwww1. 1261 */ 1262 1263 rsr a0, windowbase 1264 rsr a3, windowstart # a3 = xxxwww1yy 1265 ssr a0 # holds WB 1266 slli a0, a3, WSBITS 1267 or a3, a3, a0 # a3 = xxxwww1yyxxxwww1yy 1268 srl a3, a3 # a3 = 00xxxwww1yyxxxwww1 1269 1270 /* We are done if there are no more than the current register frame. */ 1271 1272 extui a3, a3, 1, WSBITS-1 # a3 = 0yyxxxwww 1273 movi a0, (1 << (WSBITS-1)) 1274 _beqz a3, .Lnospill # only one active frame? jump 1275 1276 /* We want 1 at the top, so that we return to the current windowbase */ 1277 1278 or a3, a3, a0 # 1yyxxxwww 1279 1280 /* Skip empty frames - get 'oldest' WINDOWSTART-bit. */ 1281 1282 wsr a3, windowstart # save shifted windowstart 1283 neg a0, a3 1284 and a3, a0, a3 # first bit set from right: 000010000 1285 1286 ffs_ws a0, a3 # a0: shifts to skip empty frames 1287 movi a3, WSBITS 1288 sub a0, a3, a0 # WSBITS-a0:number of 0-bits from right 1289 ssr a0 # save in SAR for later. 1290 1291 rsr a3, windowbase 1292 add a3, a3, a0 1293 wsr a3, windowbase 1294 rsync 1295 1296 rsr a3, windowstart 1297 srl a3, a3 # shift windowstart 1298 1299 /* WB is now just one frame below the oldest frame in the register 1300 window. WS is shifted so the oldest frame is in bit 0, thus, WB 1301 and WS differ by one 4-register frame. */ 1302 1303 /* Save frames. Depending what call was used (call4, call8, call12), 1304 * we have to save 4,8. or 12 registers. 1305 */ 1306 1307 1308.Lloop: _bbsi.l a3, 1, .Lc4 1309 _bbci.l a3, 2, .Lc12 1310 1311.Lc8: s32e a4, a13, -16 1312 l32e a4, a5, -12 1313 s32e a8, a4, -32 1314 s32e a5, a13, -12 1315 s32e a6, a13, -8 1316 s32e a7, a13, -4 1317 s32e a9, a4, -28 1318 s32e a10, a4, -24 1319 s32e a11, a4, -20 1320 srli a11, a3, 2 # shift windowbase by 2 1321 rotw 2 1322 _bnei a3, 1, .Lloop 1323 j .Lexit 1324 1325.Lc4: s32e a4, a9, -16 1326 s32e a5, a9, -12 1327 s32e a6, a9, -8 1328 s32e a7, a9, -4 1329 1330 srli a7, a3, 1 1331 rotw 1 1332 _bnei a3, 1, .Lloop 1333 j .Lexit 1334 1335.Lc12: _bbci.l a3, 3, .Linvalid_mask # bit 2 shouldn't be zero! 1336 1337 /* 12-register frame (call12) */ 1338 1339 l32e a0, a5, -12 1340 s32e a8, a0, -48 1341 mov a8, a0 1342 1343 s32e a9, a8, -44 1344 s32e a10, a8, -40 1345 s32e a11, a8, -36 1346 s32e a12, a8, -32 1347 s32e a13, a8, -28 1348 s32e a14, a8, -24 1349 s32e a15, a8, -20 1350 srli a15, a3, 3 1351 1352 /* The stack pointer for a4..a7 is out of reach, so we rotate the 1353 * window, grab the stackpointer, and rotate back. 1354 * Alternatively, we could also use the following approach, but that 1355 * makes the fixup routine much more complicated: 1356 * rotw 1 1357 * s32e a0, a13, -16 1358 * ... 1359 * rotw 2 1360 */ 1361 1362 rotw 1 1363 mov a4, a13 1364 rotw -1 1365 1366 s32e a4, a8, -16 1367 s32e a5, a8, -12 1368 s32e a6, a8, -8 1369 s32e a7, a8, -4 1370 1371 rotw 3 1372 1373 _beqi a3, 1, .Lexit 1374 j .Lloop 1375 1376.Lexit: 1377 1378 /* Done. Do the final rotation and set WS */ 1379 1380 rotw 1 1381 rsr a3, windowbase 1382 ssl a3 1383 movi a3, 1 1384 sll a3, a3 1385 wsr a3, windowstart 1386.Lnospill: 1387 1388 /* Advance PC, restore registers and SAR, and return from exception. */ 1389 1390 l32i a3, a2, PT_SAR 1391 l32i a0, a2, PT_AREG0 1392 wsr a3, sar 1393 l32i a3, a2, PT_AREG3 1394 1395 /* Restore clobbered registers. */ 1396 1397 l32i a4, a2, PT_AREG4 1398 l32i a7, a2, PT_AREG7 1399 l32i a8, a2, PT_AREG8 1400 l32i a11, a2, PT_AREG11 1401 l32i a12, a2, PT_AREG12 1402 l32i a15, a2, PT_AREG15 1403 1404 movi a2, 0 1405 rfe 1406 1407.Linvalid_mask: 1408 1409 /* We get here because of an unrecoverable error in the window 1410 * registers, so set up a dummy frame and kill the user application. 1411 * Note: We assume EXC_TABLE_KSTK contains a valid stack pointer. 1412 */ 1413 1414 movi a0, 1 1415 movi a1, 0 1416 1417 wsr a0, windowstart 1418 wsr a1, windowbase 1419 rsync 1420 1421 movi a0, 0 1422 1423 rsr a3, excsave1 1424 l32i a1, a3, EXC_TABLE_KSTK 1425 1426 movi a4, KERNEL_PS_WOE_MASK | LOCKLEVEL 1427 wsr a4, ps 1428 rsync 1429 1430 movi abi_arg0, SIGSEGV 1431 abi_call make_task_dead 1432 1433 /* shouldn't return, so panic */ 1434 1435 wsr a0, excsave1 1436 call0 unrecoverable_exception # should not return 14371: j 1b 1438 1439 1440ENDPROC(fast_syscall_spill_registers) 1441 1442/* Fixup handler. 1443 * 1444 * We get here if the spill routine causes an exception, e.g. tlb miss. 1445 * We basically restore WINDOWBASE and WINDOWSTART to the condition when 1446 * we entered the spill routine and jump to the user exception handler. 1447 * 1448 * Note that we only need to restore the bits in windowstart that have not 1449 * been spilled yet by the _spill_register routine. Luckily, a3 contains a 1450 * rotated windowstart with only those bits set for frames that haven't been 1451 * spilled yet. Because a3 is rotated such that bit 0 represents the register 1452 * frame for the current windowbase - 1, we need to rotate a3 left by the 1453 * value of the current windowbase + 1 and move it to windowstart. 1454 * 1455 * a0: value of depc, original value in depc 1456 * a2: trashed, original value in EXC_TABLE_DOUBLE_SAVE 1457 * a3: exctable, original value in excsave1 1458 */ 1459 1460ENTRY(fast_syscall_spill_registers_fixup) 1461 1462 rsr a2, windowbase # get current windowbase (a2 is saved) 1463 xsr a0, depc # restore depc and a0 1464 ssl a2 # set shift (32 - WB) 1465 1466 /* We need to make sure the current registers (a0-a3) are preserved. 1467 * To do this, we simply set the bit for the current window frame 1468 * in WS, so that the exception handlers save them to the task stack. 1469 * 1470 * Note: we use a3 to set the windowbase, so we take a special care 1471 * of it, saving it in the original _spill_registers frame across 1472 * the exception handler call. 1473 */ 1474 1475 xsr a3, excsave1 # get spill-mask 1476 slli a3, a3, 1 # shift left by one 1477 addi a3, a3, 1 # set the bit for the current window frame 1478 1479 slli a2, a3, 32-WSBITS 1480 src a2, a3, a2 # a2 = xxwww1yyxxxwww1yy...... 1481 wsr a2, windowstart # set corrected windowstart 1482 1483 srli a3, a3, 1 1484 rsr a2, excsave1 1485 l32i a2, a2, EXC_TABLE_DOUBLE_SAVE # restore a2 1486 xsr a2, excsave1 1487 s32i a3, a2, EXC_TABLE_DOUBLE_SAVE # save a3 1488 l32i a3, a2, EXC_TABLE_PARAM # original WB (in user task) 1489 xsr a2, excsave1 1490 1491 /* Return to the original (user task) WINDOWBASE. 1492 * We leave the following frame behind: 1493 * a0, a1, a2 same 1494 * a3: trashed (saved in EXC_TABLE_DOUBLE_SAVE) 1495 * depc: depc (we have to return to that address) 1496 * excsave_1: exctable 1497 */ 1498 1499 wsr a3, windowbase 1500 rsync 1501 1502 /* We are now in the original frame when we entered _spill_registers: 1503 * a0: return address 1504 * a1: used, stack pointer 1505 * a2: kernel stack pointer 1506 * a3: available 1507 * depc: exception address 1508 * excsave: exctable 1509 * Note: This frame might be the same as above. 1510 */ 1511 1512 /* Setup stack pointer. */ 1513 1514 addi a2, a2, -PT_USER_SIZE 1515 s32i a0, a2, PT_AREG0 1516 1517 /* Make sure we return to this fixup handler. */ 1518 1519 movi a3, fast_syscall_spill_registers_fixup_return 1520 s32i a3, a2, PT_DEPC # setup depc 1521 1522 /* Jump to the exception handler. */ 1523 1524 rsr a3, excsave1 1525 rsr a0, exccause 1526 addx4 a0, a0, a3 # find entry in table 1527 l32i a0, a0, EXC_TABLE_FAST_USER # load handler 1528 l32i a3, a3, EXC_TABLE_DOUBLE_SAVE 1529 jx a0 1530 1531ENDPROC(fast_syscall_spill_registers_fixup) 1532 1533ENTRY(fast_syscall_spill_registers_fixup_return) 1534 1535 /* When we return here, all registers have been restored (a2: DEPC) */ 1536 1537 wsr a2, depc # exception address 1538 1539 /* Restore fixup handler. */ 1540 1541 rsr a2, excsave1 1542 s32i a3, a2, EXC_TABLE_DOUBLE_SAVE 1543 movi a3, fast_syscall_spill_registers_fixup 1544 s32i a3, a2, EXC_TABLE_FIXUP 1545 rsr a3, windowbase 1546 s32i a3, a2, EXC_TABLE_PARAM 1547 l32i a2, a2, EXC_TABLE_KSTK 1548 1549 /* Load WB at the time the exception occurred. */ 1550 1551 rsr a3, sar # WB is still in SAR 1552 neg a3, a3 1553 wsr a3, windowbase 1554 rsync 1555 1556 rsr a3, excsave1 1557 l32i a3, a3, EXC_TABLE_DOUBLE_SAVE 1558 1559 rfde 1560 1561ENDPROC(fast_syscall_spill_registers_fixup_return) 1562 1563#else /* CONFIG_FAST_SYSCALL_SPILL_REGISTERS */ 1564 1565ENTRY(fast_syscall_spill_registers) 1566 1567 l32i a0, a2, PT_AREG0 # restore a0 1568 movi a2, -ENOSYS 1569 rfe 1570 1571ENDPROC(fast_syscall_spill_registers) 1572 1573#endif /* CONFIG_FAST_SYSCALL_SPILL_REGISTERS */ 1574 1575#ifdef CONFIG_MMU 1576/* 1577 * We should never get here. Bail out! 1578 */ 1579 1580ENTRY(fast_second_level_miss_double_kernel) 1581 15821: 1583 call0 unrecoverable_exception # should not return 15841: j 1b 1585 1586ENDPROC(fast_second_level_miss_double_kernel) 1587 1588/* First-level entry handler for user, kernel, and double 2nd-level 1589 * TLB miss exceptions. Note that for now, user and kernel miss 1590 * exceptions share the same entry point and are handled identically. 1591 * 1592 * An old, less-efficient C version of this function used to exist. 1593 * We include it below, interleaved as comments, for reference. 1594 * 1595 * Entry condition: 1596 * 1597 * a0: trashed, original value saved on stack (PT_AREG0) 1598 * a1: a1 1599 * a2: new stack pointer, original in DEPC 1600 * a3: a3 1601 * depc: a2, original value saved on stack (PT_DEPC) 1602 * excsave_1: dispatch table 1603 * 1604 * PT_DEPC >= VALID_DOUBLE_EXCEPTION_ADDRESS: double exception, DEPC 1605 * < VALID_DOUBLE_EXCEPTION_ADDRESS: regular exception 1606 */ 1607 1608ENTRY(fast_second_level_miss) 1609 1610 /* Save a1 and a3. Note: we don't expect a double exception. */ 1611 1612 s32i a1, a2, PT_AREG1 1613 s32i a3, a2, PT_AREG3 1614 1615 /* We need to map the page of PTEs for the user task. Find 1616 * the pointer to that page. Also, it's possible for tsk->mm 1617 * to be NULL while tsk->active_mm is nonzero if we faulted on 1618 * a vmalloc address. In that rare case, we must use 1619 * active_mm instead to avoid a fault in this handler. See 1620 * 1621 * http://mail.nl.linux.org/linux-mm/2002-08/msg00258.html 1622 * (or search Internet on "mm vs. active_mm") 1623 * 1624 * if (!mm) 1625 * mm = tsk->active_mm; 1626 * pgd = pgd_offset (mm, regs->excvaddr); 1627 * pmd = pmd_offset (pgd, regs->excvaddr); 1628 * pmdval = *pmd; 1629 */ 1630 1631 GET_CURRENT(a1,a2) 1632 l32i a0, a1, TASK_MM # tsk->mm 1633 beqz a0, 9f 1634 16358: rsr a3, excvaddr # fault address 1636 _PGD_OFFSET(a0, a3, a1) 1637 l32i a0, a0, 0 # read pmdval 1638 beqz a0, 2f 1639 1640 /* Read ptevaddr and convert to top of page-table page. 1641 * 1642 * vpnval = read_ptevaddr_register() & PAGE_MASK; 1643 * vpnval += DTLB_WAY_PGTABLE; 1644 * pteval = mk_pte (virt_to_page(pmd_val(pmdval)), PAGE_KERNEL); 1645 * write_dtlb_entry (pteval, vpnval); 1646 * 1647 * The messy computation for 'pteval' above really simplifies 1648 * into the following: 1649 * 1650 * pteval = ((pmdval - PAGE_OFFSET + PHYS_OFFSET) & PAGE_MASK) 1651 * | PAGE_DIRECTORY 1652 */ 1653 1654 movi a1, (PHYS_OFFSET - PAGE_OFFSET) & 0xffffffff 1655 add a0, a0, a1 # pmdval - PAGE_OFFSET 1656 extui a1, a0, 0, PAGE_SHIFT # ... & PAGE_MASK 1657 xor a0, a0, a1 1658 1659 movi a1, _PAGE_DIRECTORY 1660 or a0, a0, a1 # ... | PAGE_DIRECTORY 1661 1662 /* 1663 * We utilize all three wired-ways (7-9) to hold pmd translations. 1664 * Memory regions are mapped to the DTLBs according to bits 28 and 29. 1665 * This allows to map the three most common regions to three different 1666 * DTLBs: 1667 * 0,1 -> way 7 program (0040.0000) and virtual (c000.0000) 1668 * 2 -> way 8 shared libaries (2000.0000) 1669 * 3 -> way 0 stack (3000.0000) 1670 */ 1671 1672 extui a3, a3, 28, 2 # addr. bit 28 and 29 0,1,2,3 1673 rsr a1, ptevaddr 1674 addx2 a3, a3, a3 # -> 0,3,6,9 1675 srli a1, a1, PAGE_SHIFT 1676 extui a3, a3, 2, 2 # -> 0,0,1,2 1677 slli a1, a1, PAGE_SHIFT # ptevaddr & PAGE_MASK 1678 addi a3, a3, DTLB_WAY_PGD 1679 add a1, a1, a3 # ... + way_number 1680 16813: wdtlb a0, a1 1682 dsync 1683 1684 /* Exit critical section. */ 1685 16864: rsr a3, excsave1 1687 movi a0, 0 1688 s32i a0, a3, EXC_TABLE_FIXUP 1689 1690 /* Restore the working registers, and return. */ 1691 1692 l32i a0, a2, PT_AREG0 1693 l32i a1, a2, PT_AREG1 1694 l32i a3, a2, PT_AREG3 1695 l32i a2, a2, PT_DEPC 1696 1697 bgeui a2, VALID_DOUBLE_EXCEPTION_ADDRESS, 1f 1698 1699 /* Restore excsave1 and return. */ 1700 1701 rsr a2, depc 1702 rfe 1703 1704 /* Return from double exception. */ 1705 17061: xsr a2, depc 1707 esync 1708 rfde 1709 17109: l32i a0, a1, TASK_ACTIVE_MM # unlikely case mm == 0 1711 bnez a0, 8b 1712 1713 /* Even more unlikely case active_mm == 0. 1714 * We can get here with NMI in the middle of context_switch that 1715 * touches vmalloc area. 1716 */ 1717 movi a0, init_mm 1718 j 8b 1719 1720#if (DCACHE_WAY_SIZE > PAGE_SIZE) 1721 17222: /* Special case for cache aliasing. 1723 * We (should) only get here if a clear_user_page, copy_user_page 1724 * or the aliased cache flush functions got preemptively interrupted 1725 * by another task. Re-establish temporary mapping to the 1726 * TLBTEMP_BASE areas. 1727 */ 1728 1729 /* We shouldn't be in a double exception */ 1730 1731 l32i a0, a2, PT_DEPC 1732 bgeui a0, VALID_DOUBLE_EXCEPTION_ADDRESS, 2f 1733 1734 /* Make sure the exception originated in the special functions */ 1735 1736 movi a0, __tlbtemp_mapping_start 1737 rsr a3, epc1 1738 bltu a3, a0, 2f 1739 movi a0, __tlbtemp_mapping_end 1740 bgeu a3, a0, 2f 1741 1742 /* Check if excvaddr was in one of the TLBTEMP_BASE areas. */ 1743 1744 movi a3, TLBTEMP_BASE_1 1745 rsr a0, excvaddr 1746 bltu a0, a3, 2f 1747 1748 addi a1, a0, -TLBTEMP_SIZE 1749 bgeu a1, a3, 2f 1750 1751 /* Check if we have to restore an ITLB mapping. */ 1752 1753 movi a1, __tlbtemp_mapping_itlb 1754 rsr a3, epc1 1755 sub a3, a3, a1 1756 1757 /* Calculate VPN */ 1758 1759 movi a1, PAGE_MASK 1760 and a1, a1, a0 1761 1762 /* Jump for ITLB entry */ 1763 1764 bgez a3, 1f 1765 1766 /* We can use up to two TLBTEMP areas, one for src and one for dst. */ 1767 1768 extui a3, a0, PAGE_SHIFT + DCACHE_ALIAS_ORDER, 1 1769 add a1, a3, a1 1770 1771 /* PPN is in a6 for the first TLBTEMP area and in a7 for the second. */ 1772 1773 mov a0, a6 1774 movnez a0, a7, a3 1775 j 3b 1776 1777 /* ITLB entry. We only use dst in a6. */ 1778 17791: witlb a6, a1 1780 isync 1781 j 4b 1782 1783 1784#endif // DCACHE_WAY_SIZE > PAGE_SIZE 1785 1786 17872: /* Invalid PGD, default exception handling */ 1788 1789 rsr a1, depc 1790 s32i a1, a2, PT_AREG2 1791 mov a1, a2 1792 1793 rsr a2, ps 1794 bbsi.l a2, PS_UM_BIT, 1f 1795 call0 _kernel_exception 17961: call0 _user_exception 1797 1798ENDPROC(fast_second_level_miss) 1799 1800/* 1801 * StoreProhibitedException 1802 * 1803 * Update the pte and invalidate the itlb mapping for this pte. 1804 * 1805 * Entry condition: 1806 * 1807 * a0: trashed, original value saved on stack (PT_AREG0) 1808 * a1: a1 1809 * a2: new stack pointer, original in DEPC 1810 * a3: a3 1811 * depc: a2, original value saved on stack (PT_DEPC) 1812 * excsave_1: dispatch table 1813 * 1814 * PT_DEPC >= VALID_DOUBLE_EXCEPTION_ADDRESS: double exception, DEPC 1815 * < VALID_DOUBLE_EXCEPTION_ADDRESS: regular exception 1816 */ 1817 1818ENTRY(fast_store_prohibited) 1819 1820 /* Save a1 and a3. */ 1821 1822 s32i a1, a2, PT_AREG1 1823 s32i a3, a2, PT_AREG3 1824 1825 GET_CURRENT(a1,a2) 1826 l32i a0, a1, TASK_MM # tsk->mm 1827 beqz a0, 9f 1828 18298: rsr a1, excvaddr # fault address 1830 _PGD_OFFSET(a0, a1, a3) 1831 l32i a0, a0, 0 1832 beqz a0, 2f 1833 1834 /* 1835 * Note that we test _PAGE_WRITABLE_BIT only if PTE is present 1836 * and is not PAGE_NONE. See pgtable.h for possible PTE layouts. 1837 */ 1838 1839 _PTE_OFFSET(a0, a1, a3) 1840 l32i a3, a0, 0 # read pteval 1841 movi a1, _PAGE_CA_INVALID 1842 ball a3, a1, 2f 1843 bbci.l a3, _PAGE_WRITABLE_BIT, 2f 1844 1845 movi a1, _PAGE_ACCESSED | _PAGE_DIRTY | _PAGE_HW_WRITE 1846 or a3, a3, a1 1847 rsr a1, excvaddr 1848 s32i a3, a0, 0 1849 1850 /* We need to flush the cache if we have page coloring. */ 1851#if (DCACHE_WAY_SIZE > PAGE_SIZE) && XCHAL_DCACHE_IS_WRITEBACK 1852 dhwb a0, 0 1853#endif 1854 pdtlb a0, a1 1855 wdtlb a3, a0 1856 1857 /* Exit critical section. */ 1858 1859 movi a0, 0 1860 rsr a3, excsave1 1861 s32i a0, a3, EXC_TABLE_FIXUP 1862 1863 /* Restore the working registers, and return. */ 1864 1865 l32i a3, a2, PT_AREG3 1866 l32i a1, a2, PT_AREG1 1867 l32i a0, a2, PT_AREG0 1868 l32i a2, a2, PT_DEPC 1869 1870 bgeui a2, VALID_DOUBLE_EXCEPTION_ADDRESS, 1f 1871 1872 rsr a2, depc 1873 rfe 1874 1875 /* Double exception. Restore FIXUP handler and return. */ 1876 18771: xsr a2, depc 1878 esync 1879 rfde 1880 18819: l32i a0, a1, TASK_ACTIVE_MM # unlikely case mm == 0 1882 j 8b 1883 18842: /* If there was a problem, handle fault in C */ 1885 1886 rsr a3, depc # still holds a2 1887 s32i a3, a2, PT_AREG2 1888 mov a1, a2 1889 1890 rsr a2, ps 1891 bbsi.l a2, PS_UM_BIT, 1f 1892 call0 _kernel_exception 18931: call0 _user_exception 1894 1895ENDPROC(fast_store_prohibited) 1896 1897#endif /* CONFIG_MMU */ 1898 1899 .text 1900/* 1901 * System Calls. 1902 * 1903 * void system_call (struct pt_regs* regs, int exccause) 1904 * a2 a3 1905 */ 1906 .literal_position 1907 1908ENTRY(system_call) 1909 1910#if defined(__XTENSA_WINDOWED_ABI__) 1911 abi_entry_default 1912#elif defined(__XTENSA_CALL0_ABI__) 1913 abi_entry(12) 1914 1915 s32i a0, sp, 0 1916 s32i abi_saved0, sp, 4 1917 s32i abi_saved1, sp, 8 1918 mov abi_saved0, a2 1919#else 1920#error Unsupported Xtensa ABI 1921#endif 1922 1923 /* regs->syscall = regs->areg[2] */ 1924 1925 l32i a7, abi_saved0, PT_AREG2 1926 s32i a7, abi_saved0, PT_SYSCALL 1927 1928 GET_THREAD_INFO(a4, a1) 1929 l32i abi_saved1, a4, TI_FLAGS 1930 movi a4, _TIF_WORK_MASK 1931 and abi_saved1, abi_saved1, a4 1932 beqz abi_saved1, 1f 1933 1934 mov abi_arg0, abi_saved0 1935 abi_call do_syscall_trace_enter 1936 beqz abi_rv, .Lsyscall_exit 1937 l32i a7, abi_saved0, PT_SYSCALL 1938 19391: 1940 /* syscall = sys_call_table[syscall_nr] */ 1941 1942 movi a4, sys_call_table 1943 movi a5, __NR_syscalls 1944 movi abi_rv, -ENOSYS 1945 bgeu a7, a5, 1f 1946 1947 addx4 a4, a7, a4 1948 l32i abi_tmp0, a4, 0 1949 1950 /* Load args: arg0 - arg5 are passed via regs. */ 1951 1952 l32i abi_arg0, abi_saved0, PT_AREG6 1953 l32i abi_arg1, abi_saved0, PT_AREG3 1954 l32i abi_arg2, abi_saved0, PT_AREG4 1955 l32i abi_arg3, abi_saved0, PT_AREG5 1956 l32i abi_arg4, abi_saved0, PT_AREG8 1957 l32i abi_arg5, abi_saved0, PT_AREG9 1958 1959 abi_callx abi_tmp0 1960 19611: /* regs->areg[2] = return_value */ 1962 1963 s32i abi_rv, abi_saved0, PT_AREG2 1964 bnez abi_saved1, 1f 1965.Lsyscall_exit: 1966#if defined(__XTENSA_WINDOWED_ABI__) 1967 abi_ret_default 1968#elif defined(__XTENSA_CALL0_ABI__) 1969 l32i a0, sp, 0 1970 l32i abi_saved0, sp, 4 1971 l32i abi_saved1, sp, 8 1972 abi_ret(12) 1973#else 1974#error Unsupported Xtensa ABI 1975#endif 1976 19771: 1978 mov abi_arg0, abi_saved0 1979 abi_call do_syscall_trace_leave 1980 j .Lsyscall_exit 1981 1982ENDPROC(system_call) 1983 1984/* 1985 * Spill live registers on the kernel stack macro. 1986 * 1987 * Entry condition: ps.woe is set, ps.excm is cleared 1988 * Exit condition: windowstart has single bit set 1989 * May clobber: a12, a13 1990 */ 1991 .macro spill_registers_kernel 1992 1993#if XCHAL_NUM_AREGS > 16 1994 call12 1f 1995 _j 2f 1996 retw 1997 .align 4 19981: 1999 _entry a1, 48 2000 addi a12, a0, 3 2001#if XCHAL_NUM_AREGS > 32 2002 .rept (XCHAL_NUM_AREGS - 32) / 12 2003 _entry a1, 48 2004 mov a12, a0 2005 .endr 2006#endif 2007 _entry a1, 16 2008#if XCHAL_NUM_AREGS % 12 == 0 2009 mov a8, a8 2010#elif XCHAL_NUM_AREGS % 12 == 4 2011 mov a12, a12 2012#elif XCHAL_NUM_AREGS % 12 == 8 2013 mov a4, a4 2014#endif 2015 retw 20162: 2017#else 2018 mov a12, a12 2019#endif 2020 .endm 2021 2022/* 2023 * Task switch. 2024 * 2025 * struct task* _switch_to (struct task* prev, struct task* next) 2026 * a2 a2 a3 2027 */ 2028 2029ENTRY(_switch_to) 2030 2031#if defined(__XTENSA_WINDOWED_ABI__) 2032 abi_entry(XTENSA_SPILL_STACK_RESERVE) 2033#elif defined(__XTENSA_CALL0_ABI__) 2034 abi_entry(16) 2035 2036 s32i a12, sp, 0 2037 s32i a13, sp, 4 2038 s32i a14, sp, 8 2039 s32i a15, sp, 12 2040#else 2041#error Unsupported Xtensa ABI 2042#endif 2043 mov a11, a3 # and 'next' (a3) 2044 2045 l32i a4, a2, TASK_THREAD_INFO 2046 l32i a5, a3, TASK_THREAD_INFO 2047 2048 save_xtregs_user a4 a6 a8 a9 a12 a13 THREAD_XTREGS_USER 2049 2050#if THREAD_RA > 1020 || THREAD_SP > 1020 2051 addi a10, a2, TASK_THREAD 2052 s32i a0, a10, THREAD_RA - TASK_THREAD # save return address 2053 s32i a1, a10, THREAD_SP - TASK_THREAD # save stack pointer 2054#else 2055 s32i a0, a2, THREAD_RA # save return address 2056 s32i a1, a2, THREAD_SP # save stack pointer 2057#endif 2058 2059#if defined(CONFIG_STACKPROTECTOR) && !defined(CONFIG_SMP) 2060 movi a6, __stack_chk_guard 2061 l32i a8, a3, TASK_STACK_CANARY 2062 s32i a8, a6, 0 2063#endif 2064 2065 /* Disable ints while we manipulate the stack pointer. */ 2066 2067 irq_save a14, a3 2068 rsync 2069 2070 /* Switch CPENABLE */ 2071 2072#if (XTENSA_HAVE_COPROCESSORS || XTENSA_HAVE_IO_PORTS) 2073 l32i a3, a5, THREAD_CPENABLE 2074 xsr a3, cpenable 2075 s32i a3, a4, THREAD_CPENABLE 2076#endif 2077 2078#if XCHAL_HAVE_EXCLUSIVE 2079 l32i a3, a5, THREAD_ATOMCTL8 2080 getex a3 2081 s32i a3, a4, THREAD_ATOMCTL8 2082#endif 2083 2084 /* Flush register file. */ 2085 2086#if defined(__XTENSA_WINDOWED_ABI__) 2087 spill_registers_kernel 2088#endif 2089 2090 /* Set kernel stack (and leave critical section) 2091 * Note: It's save to set it here. The stack will not be overwritten 2092 * because the kernel stack will only be loaded again after 2093 * we return from kernel space. 2094 */ 2095 2096 rsr a3, excsave1 # exc_table 2097 addi a7, a5, PT_REGS_OFFSET 2098 s32i a7, a3, EXC_TABLE_KSTK 2099 2100 /* restore context of the task 'next' */ 2101 2102 l32i a0, a11, THREAD_RA # restore return address 2103 l32i a1, a11, THREAD_SP # restore stack pointer 2104 2105 load_xtregs_user a5 a6 a8 a9 a12 a13 THREAD_XTREGS_USER 2106 2107 wsr a14, ps 2108 rsync 2109 2110#if defined(__XTENSA_WINDOWED_ABI__) 2111 abi_ret(XTENSA_SPILL_STACK_RESERVE) 2112#elif defined(__XTENSA_CALL0_ABI__) 2113 l32i a12, sp, 0 2114 l32i a13, sp, 4 2115 l32i a14, sp, 8 2116 l32i a15, sp, 12 2117 abi_ret(16) 2118#else 2119#error Unsupported Xtensa ABI 2120#endif 2121 2122ENDPROC(_switch_to) 2123 2124ENTRY(ret_from_fork) 2125 2126 /* void schedule_tail (struct task_struct *prev) 2127 * Note: prev is still in abi_arg0 (return value from fake call frame) 2128 */ 2129 abi_call schedule_tail 2130 2131 mov abi_arg0, a1 2132 abi_call do_syscall_trace_leave 2133 j common_exception_return 2134 2135ENDPROC(ret_from_fork) 2136 2137/* 2138 * Kernel thread creation helper 2139 * On entry, set up by copy_thread: abi_saved0 = thread_fn, 2140 * abi_saved1 = thread_fn arg. Left from _switch_to: abi_arg0 = prev 2141 */ 2142ENTRY(ret_from_kernel_thread) 2143 2144 abi_call schedule_tail 2145 mov abi_arg0, abi_saved1 2146 abi_callx abi_saved0 2147 j common_exception_return 2148 2149ENDPROC(ret_from_kernel_thread) 2150