1 /*
2  * arch/xtensa/include/asm/initialize_mmu.h
3  *
4  * Initializes MMU:
5  *
6  *      For the new V3 MMU we remap the TLB from virtual == physical
7  *      to the standard Linux mapping used in earlier MMU's.
8  *
9  *      The the MMU we also support a new configuration register that
10  *      specifies how the S32C1I instruction operates with the cache
11  *      controller.
12  *
13  * This file is subject to the terms and conditions of the GNU General
14  * Public License.  See the file "COPYING" in the main directory of
15  * this archive for more details.
16  *
17  * Copyright (C) 2008 - 2012 Tensilica, Inc.
18  *
19  *   Marc Gauthier <marc@tensilica.com>
20  *   Pete Delaney <piet@tensilica.com>
21  */
22 
23 #ifndef _XTENSA_INITIALIZE_MMU_H
24 #define _XTENSA_INITIALIZE_MMU_H
25 
26 #include <linux/init.h>
27 #include <linux/pgtable.h>
28 #include <asm/vectors.h>
29 
30 #if XCHAL_HAVE_PTP_MMU
31 #define CA_BYPASS	(_PAGE_CA_BYPASS | _PAGE_HW_WRITE | _PAGE_HW_EXEC)
32 #define CA_WRITEBACK	(_PAGE_CA_WB     | _PAGE_HW_WRITE | _PAGE_HW_EXEC)
33 #else
34 #define CA_WRITEBACK	(0x4)
35 #endif
36 
37 #ifdef __ASSEMBLY__
38 
39 #define XTENSA_HWVERSION_RC_2009_0 230000
40 
41 	.macro	initialize_mmu
42 
43 #if XCHAL_HAVE_S32C1I && (XCHAL_HW_MIN_VERSION >= XTENSA_HWVERSION_RC_2009_0)
44 /*
45  * We Have Atomic Operation Control (ATOMCTL) Register; Initialize it.
46  * For details see Documentation/xtensa/atomctl.rst
47  */
48 #if XCHAL_DCACHE_IS_COHERENT
49 	movi	a3, 0x25	/* For SMP/MX -- internal for writeback,
50 				 * RCW otherwise
51 				 */
52 #else
53 	movi	a3, 0x29	/* non-MX -- Most cores use Std Memory
54 				 * Controlers which usually can't use RCW
55 				 */
56 #endif
57 	wsr	a3, atomctl
58 #endif  /* XCHAL_HAVE_S32C1I &&
59 	 * (XCHAL_HW_MIN_VERSION >= XTENSA_HWVERSION_RC_2009_0)
60 	 */
61 
62 #if defined(CONFIG_MMU) && XCHAL_HAVE_PTP_MMU && XCHAL_HAVE_SPANNING_WAY
63 /*
64  * Have MMU v3
65  */
66 
67 #if !XCHAL_HAVE_VECBASE
68 # error "MMU v3 requires reloc vectors"
69 #endif
70 
71 	movi	a1, 0
72 	_call0	1f
73 	_j	2f
74 
75 	.align	4
76 1:	movi	a2, 0x10000000
77 
78 #if CONFIG_KERNEL_LOAD_ADDRESS < 0x40000000ul
79 #define TEMP_MAPPING_VADDR 0x40000000
80 #else
81 #define TEMP_MAPPING_VADDR 0x00000000
82 #endif
83 
84 	/* Step 1: invalidate mapping at 0x40000000..0x5FFFFFFF. */
85 
86 	movi	a2, TEMP_MAPPING_VADDR | XCHAL_SPANNING_WAY
87 	idtlb	a2
88 	iitlb	a2
89 	isync
90 
91 	/* Step 2: map 0x40000000..0x47FFFFFF to paddr containing this code
92 	 * and jump to the new mapping.
93 	 */
94 
95 	srli	a3, a0, 27
96 	slli	a3, a3, 27
97 	addi	a3, a3, CA_BYPASS
98 	addi	a7, a2, 5 - XCHAL_SPANNING_WAY
99 	wdtlb	a3, a7
100 	witlb	a3, a7
101 	isync
102 
103 	slli	a4, a0, 5
104 	srli	a4, a4, 5
105 	addi	a5, a2, -XCHAL_SPANNING_WAY
106 	add	a4, a4, a5
107 	jx	a4
108 
109 	/* Step 3: unmap everything other than current area.
110 	 *	   Start at 0x60000000, wrap around, and end with 0x20000000
111 	 */
112 2:	movi	a4, 0x20000000
113 	add	a5, a2, a4
114 3:	idtlb	a5
115 	iitlb	a5
116 	add	a5, a5, a4
117 	bne	a5, a2, 3b
118 
119 	/* Step 4: Setup MMU with the requested static mappings. */
120 
121 	movi	a6, 0x01000000
122 	wsr	a6, ITLBCFG
123 	wsr	a6, DTLBCFG
124 	isync
125 
126 	movi	a5, XCHAL_KSEG_CACHED_VADDR + XCHAL_KSEG_TLB_WAY
127 	movi	a4, XCHAL_KSEG_PADDR + CA_WRITEBACK
128 	wdtlb	a4, a5
129 	witlb	a4, a5
130 
131 	movi	a5, XCHAL_KSEG_BYPASS_VADDR + XCHAL_KSEG_TLB_WAY
132 	movi	a4, XCHAL_KSEG_PADDR + CA_BYPASS
133 	wdtlb	a4, a5
134 	witlb	a4, a5
135 
136 #ifdef CONFIG_XTENSA_KSEG_512M
137 	movi	a5, XCHAL_KSEG_CACHED_VADDR + 0x10000000 + XCHAL_KSEG_TLB_WAY
138 	movi	a4, XCHAL_KSEG_PADDR + 0x10000000 + CA_WRITEBACK
139 	wdtlb	a4, a5
140 	witlb	a4, a5
141 
142 	movi	a5, XCHAL_KSEG_BYPASS_VADDR + 0x10000000 + XCHAL_KSEG_TLB_WAY
143 	movi	a4, XCHAL_KSEG_PADDR + 0x10000000 + CA_BYPASS
144 	wdtlb	a4, a5
145 	witlb	a4, a5
146 #endif
147 
148 	movi	a5, XCHAL_KIO_CACHED_VADDR + XCHAL_KIO_TLB_WAY
149 	movi	a4, XCHAL_KIO_DEFAULT_PADDR + CA_WRITEBACK
150 	wdtlb	a4, a5
151 	witlb	a4, a5
152 
153 	movi	a5, XCHAL_KIO_BYPASS_VADDR + XCHAL_KIO_TLB_WAY
154 	movi	a4, XCHAL_KIO_DEFAULT_PADDR + CA_BYPASS
155 	wdtlb	a4, a5
156 	witlb	a4, a5
157 
158 	isync
159 
160 	/* Jump to self, using final mappings. */
161 	movi	a4, 1f
162 	jx	a4
163 
164 1:
165 	/* Step 5: remove temporary mapping. */
166 	idtlb	a7
167 	iitlb	a7
168 	isync
169 
170 	movi	a0, 0
171 	wsr	a0, ptevaddr
172 	rsync
173 
174 #endif /* defined(CONFIG_MMU) && XCHAL_HAVE_PTP_MMU &&
175 	  XCHAL_HAVE_SPANNING_WAY */
176 
177 	.endm
178 
179 	.macro	initialize_cacheattr
180 
181 #if !defined(CONFIG_MMU) && (XCHAL_HAVE_TLBS || XCHAL_HAVE_MPU)
182 #if CONFIG_MEMMAP_CACHEATTR == 0x22222222 && XCHAL_HAVE_PTP_MMU
183 #error Default MEMMAP_CACHEATTR of 0x22222222 does not work with full MMU.
184 #endif
185 
186 #if XCHAL_HAVE_MPU
187 	__REFCONST
188 	.align	4
189 .Lattribute_table:
190 	.long 0x000000, 0x1fff00, 0x1ddf00, 0x1eef00
191 	.long 0x006600, 0x000000, 0x000000, 0x000000
192 	.long 0x000000, 0x000000, 0x000000, 0x000000
193 	.long 0x000000, 0x000000, 0x000000, 0x000000
194 	.previous
195 
196 	movi	a3, .Lattribute_table
197 	movi	a4, CONFIG_MEMMAP_CACHEATTR
198 	movi	a5, 1
199 	movi	a6, XCHAL_MPU_ENTRIES
200 	movi	a10, 0x20000000
201 	movi	a11, -1
202 1:
203 	sub	a5, a5, a10
204 	extui	a8, a4, 28, 4
205 	beq	a8, a11, 2f
206 	addi	a6, a6, -1
207 	mov	a11, a8
208 2:
209 	addx4	a9, a8, a3
210 	l32i	a9, a9, 0
211 	or	a9, a9, a6
212 	wptlb	a9, a5
213 	slli	a4, a4, 4
214 	bgeu	a5, a10, 1b
215 
216 #else
217 	movi	a5, XCHAL_SPANNING_WAY
218 	movi	a6, ~_PAGE_ATTRIB_MASK
219 	movi	a4, CONFIG_MEMMAP_CACHEATTR
220 	movi	a8, 0x20000000
221 1:
222 	rdtlb1	a3, a5
223 	xor	a3, a3, a4
224 	and	a3, a3, a6
225 	xor	a3, a3, a4
226 	wdtlb	a3, a5
227 	ritlb1	a3, a5
228 	xor	a3, a3, a4
229 	and	a3, a3, a6
230 	xor	a3, a3, a4
231 	witlb	a3, a5
232 
233 	add	a5, a5, a8
234 	srli	a4, a4, 4
235 	bgeu	a5, a8, 1b
236 
237 	isync
238 #endif
239 #endif
240 
241 	.endm
242 
243 #endif /*__ASSEMBLY__*/
244 
245 #endif /* _XTENSA_INITIALIZE_MMU_H */
246