1/* SPDX-License-Identifier: GPL-2.0 */ 2/* 3 * Asm versions of Xen pv-ops, suitable for direct use. 4 * 5 * We only bother with direct forms (ie, vcpu in percpu data) of the 6 * operations here; the indirect forms are better handled in C. 7 */ 8 9#include <asm/errno.h> 10#include <asm/asm-offsets.h> 11#include <asm/percpu.h> 12#include <asm/processor-flags.h> 13#include <asm/segment.h> 14#include <asm/thread_info.h> 15#include <asm/asm.h> 16#include <asm/frame.h> 17#include <asm/unwind_hints.h> 18 19#include <xen/interface/xen.h> 20 21#include <linux/init.h> 22#include <linux/linkage.h> 23#include <../entry/calling.h> 24 25.pushsection .noinstr.text, "ax" 26/* 27 * Disabling events is simply a matter of making the event mask 28 * non-zero. 29 */ 30SYM_FUNC_START(xen_irq_disable_direct) 31 movb $1, PER_CPU_VAR(xen_vcpu_info) + XEN_vcpu_info_mask 32 RET 33SYM_FUNC_END(xen_irq_disable_direct) 34 35/* 36 * Force an event check by making a hypercall, but preserve regs 37 * before making the call. 38 */ 39SYM_FUNC_START(check_events) 40 FRAME_BEGIN 41 push %rax 42 push %rcx 43 push %rdx 44 push %rsi 45 push %rdi 46 push %r8 47 push %r9 48 push %r10 49 push %r11 50 call xen_force_evtchn_callback 51 pop %r11 52 pop %r10 53 pop %r9 54 pop %r8 55 pop %rdi 56 pop %rsi 57 pop %rdx 58 pop %rcx 59 pop %rax 60 FRAME_END 61 RET 62SYM_FUNC_END(check_events) 63 64/* 65 * Enable events. This clears the event mask and tests the pending 66 * event status with one and operation. If there are pending events, 67 * then enter the hypervisor to get them handled. 68 */ 69SYM_FUNC_START(xen_irq_enable_direct) 70 FRAME_BEGIN 71 /* Unmask events */ 72 movb $0, PER_CPU_VAR(xen_vcpu_info) + XEN_vcpu_info_mask 73 74 /* 75 * Preempt here doesn't matter because that will deal with any 76 * pending interrupts. The pending check may end up being run 77 * on the wrong CPU, but that doesn't hurt. 78 */ 79 80 /* Test for pending */ 81 testb $0xff, PER_CPU_VAR(xen_vcpu_info) + XEN_vcpu_info_pending 82 jz 1f 83 84 call check_events 851: 86 FRAME_END 87 RET 88SYM_FUNC_END(xen_irq_enable_direct) 89 90/* 91 * (xen_)save_fl is used to get the current interrupt enable status. 92 * Callers expect the status to be in X86_EFLAGS_IF, and other bits 93 * may be set in the return value. We take advantage of this by 94 * making sure that X86_EFLAGS_IF has the right value (and other bits 95 * in that byte are 0), but other bits in the return value are 96 * undefined. We need to toggle the state of the bit, because Xen and 97 * x86 use opposite senses (mask vs enable). 98 */ 99SYM_FUNC_START(xen_save_fl_direct) 100 testb $0xff, PER_CPU_VAR(xen_vcpu_info) + XEN_vcpu_info_mask 101 setz %ah 102 addb %ah, %ah 103 RET 104SYM_FUNC_END(xen_save_fl_direct) 105 106SYM_FUNC_START(xen_read_cr2) 107 FRAME_BEGIN 108 _ASM_MOV PER_CPU_VAR(xen_vcpu), %_ASM_AX 109 _ASM_MOV XEN_vcpu_info_arch_cr2(%_ASM_AX), %_ASM_AX 110 FRAME_END 111 RET 112SYM_FUNC_END(xen_read_cr2); 113 114SYM_FUNC_START(xen_read_cr2_direct) 115 FRAME_BEGIN 116 _ASM_MOV PER_CPU_VAR(xen_vcpu_info) + XEN_vcpu_info_arch_cr2, %_ASM_AX 117 FRAME_END 118 RET 119SYM_FUNC_END(xen_read_cr2_direct); 120.popsection 121 122.macro xen_pv_trap name 123SYM_CODE_START(xen_\name) 124 UNWIND_HINT_EMPTY 125 ENDBR 126 pop %rcx 127 pop %r11 128 jmp \name 129SYM_CODE_END(xen_\name) 130_ASM_NOKPROBE(xen_\name) 131.endm 132 133xen_pv_trap asm_exc_divide_error 134xen_pv_trap asm_xenpv_exc_debug 135xen_pv_trap asm_exc_int3 136xen_pv_trap asm_xenpv_exc_nmi 137xen_pv_trap asm_exc_overflow 138xen_pv_trap asm_exc_bounds 139xen_pv_trap asm_exc_invalid_op 140xen_pv_trap asm_exc_device_not_available 141xen_pv_trap asm_xenpv_exc_double_fault 142xen_pv_trap asm_exc_coproc_segment_overrun 143xen_pv_trap asm_exc_invalid_tss 144xen_pv_trap asm_exc_segment_not_present 145xen_pv_trap asm_exc_stack_segment 146xen_pv_trap asm_exc_general_protection 147xen_pv_trap asm_exc_page_fault 148xen_pv_trap asm_exc_spurious_interrupt_bug 149xen_pv_trap asm_exc_coprocessor_error 150xen_pv_trap asm_exc_alignment_check 151#ifdef CONFIG_X86_KERNEL_IBT 152xen_pv_trap asm_exc_control_protection 153#endif 154#ifdef CONFIG_X86_MCE 155xen_pv_trap asm_xenpv_exc_machine_check 156#endif /* CONFIG_X86_MCE */ 157xen_pv_trap asm_exc_simd_coprocessor_error 158#ifdef CONFIG_IA32_EMULATION 159xen_pv_trap entry_INT80_compat 160#endif 161xen_pv_trap asm_exc_xen_unknown_trap 162xen_pv_trap asm_exc_xen_hypervisor_callback 163 164 __INIT 165SYM_CODE_START(xen_early_idt_handler_array) 166 i = 0 167 .rept NUM_EXCEPTION_VECTORS 168 UNWIND_HINT_EMPTY 169 ENDBR 170 pop %rcx 171 pop %r11 172 jmp early_idt_handler_array + i*EARLY_IDT_HANDLER_SIZE 173 i = i + 1 174 .fill xen_early_idt_handler_array + i*XEN_EARLY_IDT_HANDLER_SIZE - ., 1, 0xcc 175 .endr 176SYM_CODE_END(xen_early_idt_handler_array) 177 __FINIT 178 179hypercall_iret = hypercall_page + __HYPERVISOR_iret * 32 180/* 181 * Xen64 iret frame: 182 * 183 * ss 184 * rsp 185 * rflags 186 * cs 187 * rip <-- standard iret frame 188 * 189 * flags 190 * 191 * rcx } 192 * r11 }<-- pushed by hypercall page 193 * rsp->rax } 194 */ 195SYM_CODE_START(xen_iret) 196 UNWIND_HINT_EMPTY 197 ANNOTATE_NOENDBR 198 pushq $0 199 jmp hypercall_iret 200SYM_CODE_END(xen_iret) 201 202/* 203 * XEN pv doesn't use trampoline stack, PER_CPU_VAR(cpu_tss_rw + TSS_sp0) is 204 * also the kernel stack. Reusing swapgs_restore_regs_and_return_to_usermode() 205 * in XEN pv would cause %rsp to move up to the top of the kernel stack and 206 * leave the IRET frame below %rsp, which is dangerous to be corrupted if #NMI 207 * interrupts. And swapgs_restore_regs_and_return_to_usermode() pushing the IRET 208 * frame at the same address is useless. 209 */ 210SYM_CODE_START(xenpv_restore_regs_and_return_to_usermode) 211 UNWIND_HINT_REGS 212 POP_REGS 213 214 /* stackleak_erase() can work safely on the kernel stack. */ 215 STACKLEAK_ERASE_NOCLOBBER 216 217 addq $8, %rsp /* skip regs->orig_ax */ 218 jmp xen_iret 219SYM_CODE_END(xenpv_restore_regs_and_return_to_usermode) 220 221/* 222 * Xen handles syscall callbacks much like ordinary exceptions, which 223 * means we have: 224 * - kernel gs 225 * - kernel rsp 226 * - an iret-like stack frame on the stack (including rcx and r11): 227 * ss 228 * rsp 229 * rflags 230 * cs 231 * rip 232 * r11 233 * rsp->rcx 234 */ 235 236/* Normal 64-bit system call target */ 237SYM_CODE_START(xen_syscall_target) 238 UNWIND_HINT_EMPTY 239 ENDBR 240 popq %rcx 241 popq %r11 242 243 /* 244 * Neither Xen nor the kernel really knows what the old SS and 245 * CS were. The kernel expects __USER_DS and __USER_CS, so 246 * report those values even though Xen will guess its own values. 247 */ 248 movq $__USER_DS, 4*8(%rsp) 249 movq $__USER_CS, 1*8(%rsp) 250 251 jmp entry_SYSCALL_64_after_hwframe 252SYM_CODE_END(xen_syscall_target) 253 254#ifdef CONFIG_IA32_EMULATION 255 256/* 32-bit compat syscall target */ 257SYM_CODE_START(xen_syscall32_target) 258 UNWIND_HINT_EMPTY 259 ENDBR 260 popq %rcx 261 popq %r11 262 263 /* 264 * Neither Xen nor the kernel really knows what the old SS and 265 * CS were. The kernel expects __USER32_DS and __USER32_CS, so 266 * report those values even though Xen will guess its own values. 267 */ 268 movq $__USER32_DS, 4*8(%rsp) 269 movq $__USER32_CS, 1*8(%rsp) 270 271 jmp entry_SYSCALL_compat_after_hwframe 272SYM_CODE_END(xen_syscall32_target) 273 274/* 32-bit compat sysenter target */ 275SYM_CODE_START(xen_sysenter_target) 276 UNWIND_HINT_EMPTY 277 ENDBR 278 /* 279 * NB: Xen is polite and clears TF from EFLAGS for us. This means 280 * that we don't need to guard against single step exceptions here. 281 */ 282 popq %rcx 283 popq %r11 284 285 /* 286 * Neither Xen nor the kernel really knows what the old SS and 287 * CS were. The kernel expects __USER32_DS and __USER32_CS, so 288 * report those values even though Xen will guess its own values. 289 */ 290 movq $__USER32_DS, 4*8(%rsp) 291 movq $__USER32_CS, 1*8(%rsp) 292 293 jmp entry_SYSENTER_compat_after_hwframe 294SYM_CODE_END(xen_sysenter_target) 295 296#else /* !CONFIG_IA32_EMULATION */ 297 298SYM_CODE_START(xen_syscall32_target) 299SYM_CODE_START(xen_sysenter_target) 300 UNWIND_HINT_EMPTY 301 ENDBR 302 lea 16(%rsp), %rsp /* strip %rcx, %r11 */ 303 mov $-ENOSYS, %rax 304 pushq $0 305 jmp hypercall_iret 306SYM_CODE_END(xen_sysenter_target) 307SYM_CODE_END(xen_syscall32_target) 308 309#endif /* CONFIG_IA32_EMULATION */ 310