1/* SPDX-License-Identifier: GPL-2.0 */ 2#include <linux/linkage.h> 3#include <asm/segment.h> 4#include <asm/page_types.h> 5#include <asm/processor-flags.h> 6#include <asm/msr-index.h> 7#include "realmode.h" 8 9/* 10 * The following code and data reboots the machine by switching to real 11 * mode and jumping to the BIOS reset entry point, as if the CPU has 12 * really been reset. The previous version asked the keyboard 13 * controller to pulse the CPU reset line, which is more thorough, but 14 * doesn't work with at least one type of 486 motherboard. It is easy 15 * to stop this code working; hence the copious comments. 16 * 17 * This code is called with the restart type (0 = BIOS, 1 = APM) in 18 * the primary argument register (%eax for 32 bit, %edi for 64 bit). 19 */ 20 .section ".text32", "ax" 21 .code32 22SYM_CODE_START(machine_real_restart_asm) 23 24#ifdef CONFIG_X86_64 25 /* Switch to trampoline GDT as it is guaranteed < 4 GiB */ 26 movl $__KERNEL_DS, %eax 27 movl %eax, %ds 28 lgdtl pa_tr_gdt 29 30 /* Disable paging to drop us out of long mode */ 31 movl %cr0, %eax 32 andl $~X86_CR0_PG, %eax 33 movl %eax, %cr0 34 ljmpl $__KERNEL32_CS, $pa_machine_real_restart_paging_off 35 36SYM_INNER_LABEL(machine_real_restart_paging_off, SYM_L_GLOBAL) 37 xorl %eax, %eax 38 xorl %edx, %edx 39 movl $MSR_EFER, %ecx 40 wrmsr 41 42 movl %edi, %eax 43 44#endif /* CONFIG_X86_64 */ 45 46 /* Set up the IDT for real mode. */ 47 lidtl pa_machine_real_restart_idt 48 49 /* 50 * Set up a GDT from which we can load segment descriptors for real 51 * mode. The GDT is not used in real mode; it is just needed here to 52 * prepare the descriptors. 53 */ 54 lgdtl pa_machine_real_restart_gdt 55 56 /* 57 * Load the data segment registers with 16-bit compatible values 58 */ 59 movl $16, %ecx 60 movl %ecx, %ds 61 movl %ecx, %es 62 movl %ecx, %fs 63 movl %ecx, %gs 64 movl %ecx, %ss 65 ljmpw $8, $1f 66SYM_CODE_END(machine_real_restart_asm) 67 68/* 69 * This is 16-bit protected mode code to disable paging and the cache, 70 * switch to real mode and jump to the BIOS reset code. 71 * 72 * The instruction that switches to real mode by writing to CR0 must be 73 * followed immediately by a far jump instruction, which set CS to a 74 * valid value for real mode, and flushes the prefetch queue to avoid 75 * running instructions that have already been decoded in protected 76 * mode. 77 * 78 * Clears all the flags except ET, especially PG (paging), PE 79 * (protected-mode enable) and TS (task switch for coprocessor state 80 * save). Flushes the TLB after paging has been disabled. Sets CD and 81 * NW, to disable the cache on a 486, and invalidates the cache. This 82 * is more like the state of a 486 after reset. I don't know if 83 * something else should be done for other chips. 84 * 85 * More could be done here to set up the registers as if a CPU reset had 86 * occurred; hopefully real BIOSs don't assume much. This is not the 87 * actual BIOS entry point, anyway (that is at 0xfffffff0). 88 * 89 * Most of this work is probably excessive, but it is what is tested. 90 */ 91 .text 92 .code16 93 94 .balign 16 95machine_real_restart_asm16: 961: 97 xorl %ecx, %ecx 98 movl %cr0, %edx 99 andl $0x00000011, %edx 100 orl $0x60000000, %edx 101 movl %edx, %cr0 102 movl %ecx, %cr3 103 movl %cr0, %edx 104 testl $0x60000000, %edx /* If no cache bits -> no wbinvd */ 105 jz 2f 106 wbinvd 1072: 108 andb $0x10, %dl 109 movl %edx, %cr0 110 LJMPW_RM(3f) 1113: 112 andw %ax, %ax 113 jz bios 114 115apm: 116 movw $0x1000, %ax 117 movw %ax, %ss 118 movw $0xf000, %sp 119 movw $0x5307, %ax 120 movw $0x0001, %bx 121 movw $0x0003, %cx 122 int $0x15 123 /* This should never return... */ 124 125bios: 126 ljmpw $0xf000, $0xfff0 127 128 .section ".rodata", "a" 129 130 .balign 16 131SYM_DATA_START(machine_real_restart_idt) 132 .word 0xffff /* Length - real mode default value */ 133 .long 0 /* Base - real mode default value */ 134SYM_DATA_END(machine_real_restart_idt) 135 136 .balign 16 137SYM_DATA_START(machine_real_restart_gdt) 138 /* Self-pointer */ 139 .word 0xffff /* Length - real mode default value */ 140 .long pa_machine_real_restart_gdt 141 .word 0 142 143 /* 144 * 16-bit code segment pointing to real_mode_seg 145 * Selector value 8 146 */ 147 .word 0xffff /* Limit */ 148 .long 0x9b000000 + pa_real_mode_base 149 .word 0 150 151 /* 152 * 16-bit data segment with the selector value 16 = 0x10 and 153 * base value 0x100; since this is consistent with real mode 154 * semantics we don't have to reload the segments once CR0.PE = 0. 155 */ 156 .quad GDT_ENTRY(0x0093, 0x100, 0xffff) 157SYM_DATA_END(machine_real_restart_gdt) 158