1 // SPDX-License-Identifier: GPL-2.0 2 /* 3 * Low-Level PCI Support for PC -- Routing of Interrupts 4 * 5 * (c) 1999--2000 Martin Mares <mj@ucw.cz> 6 */ 7 8 #include <linux/types.h> 9 #include <linux/kernel.h> 10 #include <linux/pci.h> 11 #include <linux/init.h> 12 #include <linux/interrupt.h> 13 #include <linux/dmi.h> 14 #include <linux/io.h> 15 #include <linux/smp.h> 16 #include <asm/io_apic.h> 17 #include <linux/irq.h> 18 #include <linux/acpi.h> 19 #include <asm/pci_x86.h> 20 21 #define PIRQ_SIGNATURE (('$' << 0) + ('P' << 8) + ('I' << 16) + ('R' << 24)) 22 #define PIRQ_VERSION 0x0100 23 24 static int broken_hp_bios_irq9; 25 static int acer_tm360_irqrouting; 26 27 static struct irq_routing_table *pirq_table; 28 29 static int pirq_enable_irq(struct pci_dev *dev); 30 static void pirq_disable_irq(struct pci_dev *dev); 31 32 /* 33 * Never use: 0, 1, 2 (timer, keyboard, and cascade) 34 * Avoid using: 13, 14 and 15 (FP error and IDE). 35 * Penalize: 3, 4, 6, 7, 12 (known ISA uses: serial, floppy, parallel and mouse) 36 */ 37 unsigned int pcibios_irq_mask = 0xfff8; 38 39 static int pirq_penalty[16] = { 40 1000000, 1000000, 1000000, 1000, 1000, 0, 1000, 1000, 41 0, 0, 0, 0, 1000, 100000, 100000, 100000 42 }; 43 44 struct irq_router { 45 char *name; 46 u16 vendor, device; 47 int (*get)(struct pci_dev *router, struct pci_dev *dev, int pirq); 48 int (*set)(struct pci_dev *router, struct pci_dev *dev, int pirq, 49 int new); 50 }; 51 52 struct irq_router_handler { 53 u16 vendor; 54 int (*probe)(struct irq_router *r, struct pci_dev *router, u16 device); 55 }; 56 57 int (*pcibios_enable_irq)(struct pci_dev *dev) = pirq_enable_irq; 58 void (*pcibios_disable_irq)(struct pci_dev *dev) = pirq_disable_irq; 59 60 /* 61 * Check passed address for the PCI IRQ Routing Table signature 62 * and perform checksum verification. 63 */ 64 65 static inline struct irq_routing_table *pirq_check_routing_table(u8 *addr) 66 { 67 struct irq_routing_table *rt; 68 int i; 69 u8 sum; 70 71 rt = (struct irq_routing_table *) addr; 72 if (rt->signature != PIRQ_SIGNATURE || 73 rt->version != PIRQ_VERSION || 74 rt->size % 16 || 75 rt->size < sizeof(struct irq_routing_table)) 76 return NULL; 77 sum = 0; 78 for (i = 0; i < rt->size; i++) 79 sum += addr[i]; 80 if (!sum) { 81 DBG(KERN_DEBUG "PCI: Interrupt Routing Table found at 0x%p\n", 82 rt); 83 return rt; 84 } 85 return NULL; 86 } 87 88 89 90 /* 91 * Search 0xf0000 -- 0xfffff for the PCI IRQ Routing Table. 92 */ 93 94 static struct irq_routing_table * __init pirq_find_routing_table(void) 95 { 96 u8 *addr; 97 struct irq_routing_table *rt; 98 99 if (pirq_table_addr) { 100 rt = pirq_check_routing_table((u8 *) __va(pirq_table_addr)); 101 if (rt) 102 return rt; 103 printk(KERN_WARNING "PCI: PIRQ table NOT found at pirqaddr\n"); 104 } 105 for (addr = (u8 *) __va(0xf0000); addr < (u8 *) __va(0x100000); addr += 16) { 106 rt = pirq_check_routing_table(addr); 107 if (rt) 108 return rt; 109 } 110 return NULL; 111 } 112 113 /* 114 * If we have a IRQ routing table, use it to search for peer host 115 * bridges. It's a gross hack, but since there are no other known 116 * ways how to get a list of buses, we have to go this way. 117 */ 118 119 static void __init pirq_peer_trick(void) 120 { 121 struct irq_routing_table *rt = pirq_table; 122 u8 busmap[256]; 123 int i; 124 struct irq_info *e; 125 126 memset(busmap, 0, sizeof(busmap)); 127 for (i = 0; i < (rt->size - sizeof(struct irq_routing_table)) / sizeof(struct irq_info); i++) { 128 e = &rt->slots[i]; 129 #ifdef DEBUG 130 { 131 int j; 132 DBG(KERN_DEBUG "%02x:%02x slot=%02x", e->bus, e->devfn/8, e->slot); 133 for (j = 0; j < 4; j++) 134 DBG(" %d:%02x/%04x", j, e->irq[j].link, e->irq[j].bitmap); 135 DBG("\n"); 136 } 137 #endif 138 busmap[e->bus] = 1; 139 } 140 for (i = 1; i < 256; i++) { 141 if (!busmap[i] || pci_find_bus(0, i)) 142 continue; 143 pcibios_scan_root(i); 144 } 145 pcibios_last_bus = -1; 146 } 147 148 /* 149 * Code for querying and setting of IRQ routes on various interrupt routers. 150 * PIC Edge/Level Control Registers (ELCR) 0x4d0 & 0x4d1. 151 */ 152 153 void elcr_set_level_irq(unsigned int irq) 154 { 155 unsigned char mask = 1 << (irq & 7); 156 unsigned int port = 0x4d0 + (irq >> 3); 157 unsigned char val; 158 static u16 elcr_irq_mask; 159 160 if (irq >= 16 || (1 << irq) & elcr_irq_mask) 161 return; 162 163 elcr_irq_mask |= (1 << irq); 164 printk(KERN_DEBUG "PCI: setting IRQ %u as level-triggered\n", irq); 165 val = inb(port); 166 if (!(val & mask)) { 167 DBG(KERN_DEBUG " -> edge"); 168 outb(val | mask, port); 169 } 170 } 171 172 /* 173 * Common IRQ routing practice: nibbles in config space, 174 * offset by some magic constant. 175 */ 176 static unsigned int read_config_nybble(struct pci_dev *router, unsigned offset, unsigned nr) 177 { 178 u8 x; 179 unsigned reg = offset + (nr >> 1); 180 181 pci_read_config_byte(router, reg, &x); 182 return (nr & 1) ? (x >> 4) : (x & 0xf); 183 } 184 185 static void write_config_nybble(struct pci_dev *router, unsigned offset, 186 unsigned nr, unsigned int val) 187 { 188 u8 x; 189 unsigned reg = offset + (nr >> 1); 190 191 pci_read_config_byte(router, reg, &x); 192 x = (nr & 1) ? ((x & 0x0f) | (val << 4)) : ((x & 0xf0) | val); 193 pci_write_config_byte(router, reg, x); 194 } 195 196 /* 197 * ALI pirq entries are damn ugly, and completely undocumented. 198 * This has been figured out from pirq tables, and it's not a pretty 199 * picture. 200 */ 201 static int pirq_ali_get(struct pci_dev *router, struct pci_dev *dev, int pirq) 202 { 203 static const unsigned char irqmap[16] = { 0, 9, 3, 10, 4, 5, 7, 6, 1, 11, 0, 12, 0, 14, 0, 15 }; 204 205 WARN_ON_ONCE(pirq > 16); 206 return irqmap[read_config_nybble(router, 0x48, pirq-1)]; 207 } 208 209 static int pirq_ali_set(struct pci_dev *router, struct pci_dev *dev, int pirq, int irq) 210 { 211 static const unsigned char irqmap[16] = { 0, 8, 0, 2, 4, 5, 7, 6, 0, 1, 3, 9, 11, 0, 13, 15 }; 212 unsigned int val = irqmap[irq]; 213 214 WARN_ON_ONCE(pirq > 16); 215 if (val) { 216 write_config_nybble(router, 0x48, pirq-1, val); 217 return 1; 218 } 219 return 0; 220 } 221 222 /* 223 * The Intel PIIX4 pirq rules are fairly simple: "pirq" is 224 * just a pointer to the config space. 225 */ 226 static int pirq_piix_get(struct pci_dev *router, struct pci_dev *dev, int pirq) 227 { 228 u8 x; 229 230 pci_read_config_byte(router, pirq, &x); 231 return (x < 16) ? x : 0; 232 } 233 234 static int pirq_piix_set(struct pci_dev *router, struct pci_dev *dev, int pirq, int irq) 235 { 236 pci_write_config_byte(router, pirq, irq); 237 return 1; 238 } 239 240 /* 241 * The VIA pirq rules are nibble-based, like ALI, 242 * but without the ugly irq number munging. 243 * However, PIRQD is in the upper instead of lower 4 bits. 244 */ 245 static int pirq_via_get(struct pci_dev *router, struct pci_dev *dev, int pirq) 246 { 247 return read_config_nybble(router, 0x55, pirq == 4 ? 5 : pirq); 248 } 249 250 static int pirq_via_set(struct pci_dev *router, struct pci_dev *dev, int pirq, int irq) 251 { 252 write_config_nybble(router, 0x55, pirq == 4 ? 5 : pirq, irq); 253 return 1; 254 } 255 256 /* 257 * The VIA pirq rules are nibble-based, like ALI, 258 * but without the ugly irq number munging. 259 * However, for 82C586, nibble map is different . 260 */ 261 static int pirq_via586_get(struct pci_dev *router, struct pci_dev *dev, int pirq) 262 { 263 static const unsigned int pirqmap[5] = { 3, 2, 5, 1, 1 }; 264 265 WARN_ON_ONCE(pirq > 5); 266 return read_config_nybble(router, 0x55, pirqmap[pirq-1]); 267 } 268 269 static int pirq_via586_set(struct pci_dev *router, struct pci_dev *dev, int pirq, int irq) 270 { 271 static const unsigned int pirqmap[5] = { 3, 2, 5, 1, 1 }; 272 273 WARN_ON_ONCE(pirq > 5); 274 write_config_nybble(router, 0x55, pirqmap[pirq-1], irq); 275 return 1; 276 } 277 278 /* 279 * ITE 8330G pirq rules are nibble-based 280 * FIXME: pirqmap may be { 1, 0, 3, 2 }, 281 * 2+3 are both mapped to irq 9 on my system 282 */ 283 static int pirq_ite_get(struct pci_dev *router, struct pci_dev *dev, int pirq) 284 { 285 static const unsigned char pirqmap[4] = { 1, 0, 2, 3 }; 286 287 WARN_ON_ONCE(pirq > 4); 288 return read_config_nybble(router, 0x43, pirqmap[pirq-1]); 289 } 290 291 static int pirq_ite_set(struct pci_dev *router, struct pci_dev *dev, int pirq, int irq) 292 { 293 static const unsigned char pirqmap[4] = { 1, 0, 2, 3 }; 294 295 WARN_ON_ONCE(pirq > 4); 296 write_config_nybble(router, 0x43, pirqmap[pirq-1], irq); 297 return 1; 298 } 299 300 /* 301 * OPTI: high four bits are nibble pointer.. 302 * I wonder what the low bits do? 303 */ 304 static int pirq_opti_get(struct pci_dev *router, struct pci_dev *dev, int pirq) 305 { 306 return read_config_nybble(router, 0xb8, pirq >> 4); 307 } 308 309 static int pirq_opti_set(struct pci_dev *router, struct pci_dev *dev, int pirq, int irq) 310 { 311 write_config_nybble(router, 0xb8, pirq >> 4, irq); 312 return 1; 313 } 314 315 /* 316 * Cyrix: nibble offset 0x5C 317 * 0x5C bits 7:4 is INTB bits 3:0 is INTA 318 * 0x5D bits 7:4 is INTD bits 3:0 is INTC 319 */ 320 static int pirq_cyrix_get(struct pci_dev *router, struct pci_dev *dev, int pirq) 321 { 322 return read_config_nybble(router, 0x5C, (pirq-1)^1); 323 } 324 325 static int pirq_cyrix_set(struct pci_dev *router, struct pci_dev *dev, int pirq, int irq) 326 { 327 write_config_nybble(router, 0x5C, (pirq-1)^1, irq); 328 return 1; 329 } 330 331 /* 332 * PIRQ routing for SiS 85C503 router used in several SiS chipsets. 333 * We have to deal with the following issues here: 334 * - vendors have different ideas about the meaning of link values 335 * - some onboard devices (integrated in the chipset) have special 336 * links and are thus routed differently (i.e. not via PCI INTA-INTD) 337 * - different revision of the router have a different layout for 338 * the routing registers, particularly for the onchip devices 339 * 340 * For all routing registers the common thing is we have one byte 341 * per routeable link which is defined as: 342 * bit 7 IRQ mapping enabled (0) or disabled (1) 343 * bits [6:4] reserved (sometimes used for onchip devices) 344 * bits [3:0] IRQ to map to 345 * allowed: 3-7, 9-12, 14-15 346 * reserved: 0, 1, 2, 8, 13 347 * 348 * The config-space registers located at 0x41/0x42/0x43/0x44 are 349 * always used to route the normal PCI INT A/B/C/D respectively. 350 * Apparently there are systems implementing PCI routing table using 351 * link values 0x01-0x04 and others using 0x41-0x44 for PCI INTA..D. 352 * We try our best to handle both link mappings. 353 * 354 * Currently (2003-05-21) it appears most SiS chipsets follow the 355 * definition of routing registers from the SiS-5595 southbridge. 356 * According to the SiS 5595 datasheets the revision id's of the 357 * router (ISA-bridge) should be 0x01 or 0xb0. 358 * 359 * Furthermore we've also seen lspci dumps with revision 0x00 and 0xb1. 360 * Looks like these are used in a number of SiS 5xx/6xx/7xx chipsets. 361 * They seem to work with the current routing code. However there is 362 * some concern because of the two USB-OHCI HCs (original SiS 5595 363 * had only one). YMMV. 364 * 365 * Onchip routing for router rev-id 0x01/0xb0 and probably 0x00/0xb1: 366 * 367 * 0x61: IDEIRQ: 368 * bits [6:5] must be written 01 369 * bit 4 channel-select primary (0), secondary (1) 370 * 371 * 0x62: USBIRQ: 372 * bit 6 OHCI function disabled (0), enabled (1) 373 * 374 * 0x6a: ACPI/SCI IRQ: bits 4-6 reserved 375 * 376 * 0x7e: Data Acq. Module IRQ - bits 4-6 reserved 377 * 378 * We support USBIRQ (in addition to INTA-INTD) and keep the 379 * IDE, ACPI and DAQ routing untouched as set by the BIOS. 380 * 381 * Currently the only reported exception is the new SiS 65x chipset 382 * which includes the SiS 69x southbridge. Here we have the 85C503 383 * router revision 0x04 and there are changes in the register layout 384 * mostly related to the different USB HCs with USB 2.0 support. 385 * 386 * Onchip routing for router rev-id 0x04 (try-and-error observation) 387 * 388 * 0x60/0x61/0x62/0x63: 1xEHCI and 3xOHCI (companion) USB-HCs 389 * bit 6-4 are probably unused, not like 5595 390 */ 391 392 #define PIRQ_SIS_IRQ_MASK 0x0f 393 #define PIRQ_SIS_IRQ_DISABLE 0x80 394 #define PIRQ_SIS_USB_ENABLE 0x40 395 396 static int pirq_sis_get(struct pci_dev *router, struct pci_dev *dev, int pirq) 397 { 398 u8 x; 399 int reg; 400 401 reg = pirq; 402 if (reg >= 0x01 && reg <= 0x04) 403 reg += 0x40; 404 pci_read_config_byte(router, reg, &x); 405 return (x & PIRQ_SIS_IRQ_DISABLE) ? 0 : (x & PIRQ_SIS_IRQ_MASK); 406 } 407 408 static int pirq_sis_set(struct pci_dev *router, struct pci_dev *dev, int pirq, int irq) 409 { 410 u8 x; 411 int reg; 412 413 reg = pirq; 414 if (reg >= 0x01 && reg <= 0x04) 415 reg += 0x40; 416 pci_read_config_byte(router, reg, &x); 417 x &= ~(PIRQ_SIS_IRQ_MASK | PIRQ_SIS_IRQ_DISABLE); 418 x |= irq ? irq: PIRQ_SIS_IRQ_DISABLE; 419 pci_write_config_byte(router, reg, x); 420 return 1; 421 } 422 423 424 /* 425 * VLSI: nibble offset 0x74 - educated guess due to routing table and 426 * config space of VLSI 82C534 PCI-bridge/router (1004:0102) 427 * Tested on HP OmniBook 800 covering PIRQ 1, 2, 4, 8 for onboard 428 * devices, PIRQ 3 for non-pci(!) soundchip and (untested) PIRQ 6 429 * for the busbridge to the docking station. 430 */ 431 432 static int pirq_vlsi_get(struct pci_dev *router, struct pci_dev *dev, int pirq) 433 { 434 WARN_ON_ONCE(pirq >= 9); 435 if (pirq > 8) { 436 dev_info(&dev->dev, "VLSI router PIRQ escape (%d)\n", pirq); 437 return 0; 438 } 439 return read_config_nybble(router, 0x74, pirq-1); 440 } 441 442 static int pirq_vlsi_set(struct pci_dev *router, struct pci_dev *dev, int pirq, int irq) 443 { 444 WARN_ON_ONCE(pirq >= 9); 445 if (pirq > 8) { 446 dev_info(&dev->dev, "VLSI router PIRQ escape (%d)\n", pirq); 447 return 0; 448 } 449 write_config_nybble(router, 0x74, pirq-1, irq); 450 return 1; 451 } 452 453 /* 454 * ServerWorks: PCI interrupts mapped to system IRQ lines through Index 455 * and Redirect I/O registers (0x0c00 and 0x0c01). The Index register 456 * format is (PCIIRQ## | 0x10), e.g.: PCIIRQ10=0x1a. The Redirect 457 * register is a straight binary coding of desired PIC IRQ (low nibble). 458 * 459 * The 'link' value in the PIRQ table is already in the correct format 460 * for the Index register. There are some special index values: 461 * 0x00 for ACPI (SCI), 0x01 for USB, 0x02 for IDE0, 0x04 for IDE1, 462 * and 0x03 for SMBus. 463 */ 464 static int pirq_serverworks_get(struct pci_dev *router, struct pci_dev *dev, int pirq) 465 { 466 outb(pirq, 0xc00); 467 return inb(0xc01) & 0xf; 468 } 469 470 static int pirq_serverworks_set(struct pci_dev *router, struct pci_dev *dev, 471 int pirq, int irq) 472 { 473 outb(pirq, 0xc00); 474 outb(irq, 0xc01); 475 return 1; 476 } 477 478 /* Support for AMD756 PCI IRQ Routing 479 * Jhon H. Caicedo <jhcaiced@osso.org.co> 480 * Jun/21/2001 0.2.0 Release, fixed to use "nybble" functions... (jhcaiced) 481 * Jun/19/2001 Alpha Release 0.1.0 (jhcaiced) 482 * The AMD756 pirq rules are nibble-based 483 * offset 0x56 0-3 PIRQA 4-7 PIRQB 484 * offset 0x57 0-3 PIRQC 4-7 PIRQD 485 */ 486 static int pirq_amd756_get(struct pci_dev *router, struct pci_dev *dev, int pirq) 487 { 488 u8 irq; 489 irq = 0; 490 if (pirq <= 4) 491 irq = read_config_nybble(router, 0x56, pirq - 1); 492 dev_info(&dev->dev, 493 "AMD756: dev [%04x:%04x], router PIRQ %d get IRQ %d\n", 494 dev->vendor, dev->device, pirq, irq); 495 return irq; 496 } 497 498 static int pirq_amd756_set(struct pci_dev *router, struct pci_dev *dev, int pirq, int irq) 499 { 500 dev_info(&dev->dev, 501 "AMD756: dev [%04x:%04x], router PIRQ %d set IRQ %d\n", 502 dev->vendor, dev->device, pirq, irq); 503 if (pirq <= 4) 504 write_config_nybble(router, 0x56, pirq - 1, irq); 505 return 1; 506 } 507 508 /* 509 * PicoPower PT86C523 510 */ 511 static int pirq_pico_get(struct pci_dev *router, struct pci_dev *dev, int pirq) 512 { 513 outb(0x10 + ((pirq - 1) >> 1), 0x24); 514 return ((pirq - 1) & 1) ? (inb(0x26) >> 4) : (inb(0x26) & 0xf); 515 } 516 517 static int pirq_pico_set(struct pci_dev *router, struct pci_dev *dev, int pirq, 518 int irq) 519 { 520 unsigned int x; 521 outb(0x10 + ((pirq - 1) >> 1), 0x24); 522 x = inb(0x26); 523 x = ((pirq - 1) & 1) ? ((x & 0x0f) | (irq << 4)) : ((x & 0xf0) | (irq)); 524 outb(x, 0x26); 525 return 1; 526 } 527 528 #ifdef CONFIG_PCI_BIOS 529 530 static int pirq_bios_set(struct pci_dev *router, struct pci_dev *dev, int pirq, int irq) 531 { 532 struct pci_dev *bridge; 533 int pin = pci_get_interrupt_pin(dev, &bridge); 534 return pcibios_set_irq_routing(bridge, pin - 1, irq); 535 } 536 537 #endif 538 539 static __init int intel_router_probe(struct irq_router *r, struct pci_dev *router, u16 device) 540 { 541 static struct pci_device_id __initdata pirq_440gx[] = { 542 { PCI_DEVICE(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_82443GX_0) }, 543 { PCI_DEVICE(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_82443GX_2) }, 544 { }, 545 }; 546 547 /* 440GX has a proprietary PIRQ router -- don't use it */ 548 if (pci_dev_present(pirq_440gx)) 549 return 0; 550 551 switch (device) { 552 case PCI_DEVICE_ID_INTEL_82371FB_0: 553 case PCI_DEVICE_ID_INTEL_82371SB_0: 554 case PCI_DEVICE_ID_INTEL_82371AB_0: 555 case PCI_DEVICE_ID_INTEL_82371MX: 556 case PCI_DEVICE_ID_INTEL_82443MX_0: 557 case PCI_DEVICE_ID_INTEL_82801AA_0: 558 case PCI_DEVICE_ID_INTEL_82801AB_0: 559 case PCI_DEVICE_ID_INTEL_82801BA_0: 560 case PCI_DEVICE_ID_INTEL_82801BA_10: 561 case PCI_DEVICE_ID_INTEL_82801CA_0: 562 case PCI_DEVICE_ID_INTEL_82801CA_12: 563 case PCI_DEVICE_ID_INTEL_82801DB_0: 564 case PCI_DEVICE_ID_INTEL_82801E_0: 565 case PCI_DEVICE_ID_INTEL_82801EB_0: 566 case PCI_DEVICE_ID_INTEL_ESB_1: 567 case PCI_DEVICE_ID_INTEL_ICH6_0: 568 case PCI_DEVICE_ID_INTEL_ICH6_1: 569 case PCI_DEVICE_ID_INTEL_ICH7_0: 570 case PCI_DEVICE_ID_INTEL_ICH7_1: 571 case PCI_DEVICE_ID_INTEL_ICH7_30: 572 case PCI_DEVICE_ID_INTEL_ICH7_31: 573 case PCI_DEVICE_ID_INTEL_TGP_LPC: 574 case PCI_DEVICE_ID_INTEL_ESB2_0: 575 case PCI_DEVICE_ID_INTEL_ICH8_0: 576 case PCI_DEVICE_ID_INTEL_ICH8_1: 577 case PCI_DEVICE_ID_INTEL_ICH8_2: 578 case PCI_DEVICE_ID_INTEL_ICH8_3: 579 case PCI_DEVICE_ID_INTEL_ICH8_4: 580 case PCI_DEVICE_ID_INTEL_ICH9_0: 581 case PCI_DEVICE_ID_INTEL_ICH9_1: 582 case PCI_DEVICE_ID_INTEL_ICH9_2: 583 case PCI_DEVICE_ID_INTEL_ICH9_3: 584 case PCI_DEVICE_ID_INTEL_ICH9_4: 585 case PCI_DEVICE_ID_INTEL_ICH9_5: 586 case PCI_DEVICE_ID_INTEL_EP80579_0: 587 case PCI_DEVICE_ID_INTEL_ICH10_0: 588 case PCI_DEVICE_ID_INTEL_ICH10_1: 589 case PCI_DEVICE_ID_INTEL_ICH10_2: 590 case PCI_DEVICE_ID_INTEL_ICH10_3: 591 case PCI_DEVICE_ID_INTEL_PATSBURG_LPC_0: 592 case PCI_DEVICE_ID_INTEL_PATSBURG_LPC_1: 593 r->name = "PIIX/ICH"; 594 r->get = pirq_piix_get; 595 r->set = pirq_piix_set; 596 return 1; 597 } 598 599 if ((device >= PCI_DEVICE_ID_INTEL_5_3400_SERIES_LPC_MIN && 600 device <= PCI_DEVICE_ID_INTEL_5_3400_SERIES_LPC_MAX) 601 || (device >= PCI_DEVICE_ID_INTEL_COUGARPOINT_LPC_MIN && 602 device <= PCI_DEVICE_ID_INTEL_COUGARPOINT_LPC_MAX) 603 || (device >= PCI_DEVICE_ID_INTEL_DH89XXCC_LPC_MIN && 604 device <= PCI_DEVICE_ID_INTEL_DH89XXCC_LPC_MAX) 605 || (device >= PCI_DEVICE_ID_INTEL_PANTHERPOINT_LPC_MIN && 606 device <= PCI_DEVICE_ID_INTEL_PANTHERPOINT_LPC_MAX)) { 607 r->name = "PIIX/ICH"; 608 r->get = pirq_piix_get; 609 r->set = pirq_piix_set; 610 return 1; 611 } 612 613 return 0; 614 } 615 616 static __init int via_router_probe(struct irq_router *r, 617 struct pci_dev *router, u16 device) 618 { 619 /* FIXME: We should move some of the quirk fixup stuff here */ 620 621 /* 622 * workarounds for some buggy BIOSes 623 */ 624 if (device == PCI_DEVICE_ID_VIA_82C586_0) { 625 switch (router->device) { 626 case PCI_DEVICE_ID_VIA_82C686: 627 /* 628 * Asus k7m bios wrongly reports 82C686A 629 * as 586-compatible 630 */ 631 device = PCI_DEVICE_ID_VIA_82C686; 632 break; 633 case PCI_DEVICE_ID_VIA_8235: 634 /** 635 * Asus a7v-x bios wrongly reports 8235 636 * as 586-compatible 637 */ 638 device = PCI_DEVICE_ID_VIA_8235; 639 break; 640 case PCI_DEVICE_ID_VIA_8237: 641 /** 642 * Asus a7v600 bios wrongly reports 8237 643 * as 586-compatible 644 */ 645 device = PCI_DEVICE_ID_VIA_8237; 646 break; 647 } 648 } 649 650 switch (device) { 651 case PCI_DEVICE_ID_VIA_82C586_0: 652 r->name = "VIA"; 653 r->get = pirq_via586_get; 654 r->set = pirq_via586_set; 655 return 1; 656 case PCI_DEVICE_ID_VIA_82C596: 657 case PCI_DEVICE_ID_VIA_82C686: 658 case PCI_DEVICE_ID_VIA_8231: 659 case PCI_DEVICE_ID_VIA_8233A: 660 case PCI_DEVICE_ID_VIA_8235: 661 case PCI_DEVICE_ID_VIA_8237: 662 /* FIXME: add new ones for 8233/5 */ 663 r->name = "VIA"; 664 r->get = pirq_via_get; 665 r->set = pirq_via_set; 666 return 1; 667 } 668 return 0; 669 } 670 671 static __init int vlsi_router_probe(struct irq_router *r, struct pci_dev *router, u16 device) 672 { 673 switch (device) { 674 case PCI_DEVICE_ID_VLSI_82C534: 675 r->name = "VLSI 82C534"; 676 r->get = pirq_vlsi_get; 677 r->set = pirq_vlsi_set; 678 return 1; 679 } 680 return 0; 681 } 682 683 684 static __init int serverworks_router_probe(struct irq_router *r, 685 struct pci_dev *router, u16 device) 686 { 687 switch (device) { 688 case PCI_DEVICE_ID_SERVERWORKS_OSB4: 689 case PCI_DEVICE_ID_SERVERWORKS_CSB5: 690 r->name = "ServerWorks"; 691 r->get = pirq_serverworks_get; 692 r->set = pirq_serverworks_set; 693 return 1; 694 } 695 return 0; 696 } 697 698 static __init int sis_router_probe(struct irq_router *r, struct pci_dev *router, u16 device) 699 { 700 if (device != PCI_DEVICE_ID_SI_503) 701 return 0; 702 703 r->name = "SIS"; 704 r->get = pirq_sis_get; 705 r->set = pirq_sis_set; 706 return 1; 707 } 708 709 static __init int cyrix_router_probe(struct irq_router *r, struct pci_dev *router, u16 device) 710 { 711 switch (device) { 712 case PCI_DEVICE_ID_CYRIX_5520: 713 r->name = "NatSemi"; 714 r->get = pirq_cyrix_get; 715 r->set = pirq_cyrix_set; 716 return 1; 717 } 718 return 0; 719 } 720 721 static __init int opti_router_probe(struct irq_router *r, struct pci_dev *router, u16 device) 722 { 723 switch (device) { 724 case PCI_DEVICE_ID_OPTI_82C700: 725 r->name = "OPTI"; 726 r->get = pirq_opti_get; 727 r->set = pirq_opti_set; 728 return 1; 729 } 730 return 0; 731 } 732 733 static __init int ite_router_probe(struct irq_router *r, struct pci_dev *router, u16 device) 734 { 735 switch (device) { 736 case PCI_DEVICE_ID_ITE_IT8330G_0: 737 r->name = "ITE"; 738 r->get = pirq_ite_get; 739 r->set = pirq_ite_set; 740 return 1; 741 } 742 return 0; 743 } 744 745 static __init int ali_router_probe(struct irq_router *r, struct pci_dev *router, u16 device) 746 { 747 switch (device) { 748 case PCI_DEVICE_ID_AL_M1533: 749 case PCI_DEVICE_ID_AL_M1563: 750 r->name = "ALI"; 751 r->get = pirq_ali_get; 752 r->set = pirq_ali_set; 753 return 1; 754 } 755 return 0; 756 } 757 758 static __init int amd_router_probe(struct irq_router *r, struct pci_dev *router, u16 device) 759 { 760 switch (device) { 761 case PCI_DEVICE_ID_AMD_VIPER_740B: 762 r->name = "AMD756"; 763 break; 764 case PCI_DEVICE_ID_AMD_VIPER_7413: 765 r->name = "AMD766"; 766 break; 767 case PCI_DEVICE_ID_AMD_VIPER_7443: 768 r->name = "AMD768"; 769 break; 770 default: 771 return 0; 772 } 773 r->get = pirq_amd756_get; 774 r->set = pirq_amd756_set; 775 return 1; 776 } 777 778 static __init int pico_router_probe(struct irq_router *r, struct pci_dev *router, u16 device) 779 { 780 switch (device) { 781 case PCI_DEVICE_ID_PICOPOWER_PT86C523: 782 r->name = "PicoPower PT86C523"; 783 r->get = pirq_pico_get; 784 r->set = pirq_pico_set; 785 return 1; 786 787 case PCI_DEVICE_ID_PICOPOWER_PT86C523BBP: 788 r->name = "PicoPower PT86C523 rev. BB+"; 789 r->get = pirq_pico_get; 790 r->set = pirq_pico_set; 791 return 1; 792 } 793 return 0; 794 } 795 796 static __initdata struct irq_router_handler pirq_routers[] = { 797 { PCI_VENDOR_ID_INTEL, intel_router_probe }, 798 { PCI_VENDOR_ID_AL, ali_router_probe }, 799 { PCI_VENDOR_ID_ITE, ite_router_probe }, 800 { PCI_VENDOR_ID_VIA, via_router_probe }, 801 { PCI_VENDOR_ID_OPTI, opti_router_probe }, 802 { PCI_VENDOR_ID_SI, sis_router_probe }, 803 { PCI_VENDOR_ID_CYRIX, cyrix_router_probe }, 804 { PCI_VENDOR_ID_VLSI, vlsi_router_probe }, 805 { PCI_VENDOR_ID_SERVERWORKS, serverworks_router_probe }, 806 { PCI_VENDOR_ID_AMD, amd_router_probe }, 807 { PCI_VENDOR_ID_PICOPOWER, pico_router_probe }, 808 /* Someone with docs needs to add the ATI Radeon IGP */ 809 { 0, NULL } 810 }; 811 static struct irq_router pirq_router; 812 static struct pci_dev *pirq_router_dev; 813 814 815 /* 816 * FIXME: should we have an option to say "generic for 817 * chipset" ? 818 */ 819 820 static void __init pirq_find_router(struct irq_router *r) 821 { 822 struct irq_routing_table *rt = pirq_table; 823 struct irq_router_handler *h; 824 825 #ifdef CONFIG_PCI_BIOS 826 if (!rt->signature) { 827 printk(KERN_INFO "PCI: Using BIOS for IRQ routing\n"); 828 r->set = pirq_bios_set; 829 r->name = "BIOS"; 830 return; 831 } 832 #endif 833 834 /* Default unless a driver reloads it */ 835 r->name = "default"; 836 r->get = NULL; 837 r->set = NULL; 838 839 DBG(KERN_DEBUG "PCI: Attempting to find IRQ router for [%04x:%04x]\n", 840 rt->rtr_vendor, rt->rtr_device); 841 842 pirq_router_dev = pci_get_domain_bus_and_slot(0, rt->rtr_bus, 843 rt->rtr_devfn); 844 if (!pirq_router_dev) { 845 DBG(KERN_DEBUG "PCI: Interrupt router not found at " 846 "%02x:%02x\n", rt->rtr_bus, rt->rtr_devfn); 847 return; 848 } 849 850 for (h = pirq_routers; h->vendor; h++) { 851 /* First look for a router match */ 852 if (rt->rtr_vendor == h->vendor && 853 h->probe(r, pirq_router_dev, rt->rtr_device)) 854 break; 855 /* Fall back to a device match */ 856 if (pirq_router_dev->vendor == h->vendor && 857 h->probe(r, pirq_router_dev, pirq_router_dev->device)) 858 break; 859 } 860 dev_info(&pirq_router_dev->dev, "%s IRQ router [%04x:%04x]\n", 861 pirq_router.name, 862 pirq_router_dev->vendor, pirq_router_dev->device); 863 864 /* The device remains referenced for the kernel lifetime */ 865 } 866 867 static struct irq_info *pirq_get_info(struct pci_dev *dev) 868 { 869 struct irq_routing_table *rt = pirq_table; 870 int entries = (rt->size - sizeof(struct irq_routing_table)) / 871 sizeof(struct irq_info); 872 struct irq_info *info; 873 874 for (info = rt->slots; entries--; info++) 875 if (info->bus == dev->bus->number && 876 PCI_SLOT(info->devfn) == PCI_SLOT(dev->devfn)) 877 return info; 878 return NULL; 879 } 880 881 static int pcibios_lookup_irq(struct pci_dev *dev, int assign) 882 { 883 u8 pin; 884 struct irq_info *info; 885 int i, pirq, newirq; 886 int irq = 0; 887 u32 mask; 888 struct irq_router *r = &pirq_router; 889 struct pci_dev *dev2 = NULL; 890 char *msg = NULL; 891 892 /* Find IRQ pin */ 893 pci_read_config_byte(dev, PCI_INTERRUPT_PIN, &pin); 894 if (!pin) { 895 dev_dbg(&dev->dev, "no interrupt pin\n"); 896 return 0; 897 } 898 899 if (io_apic_assign_pci_irqs) 900 return 0; 901 902 /* Find IRQ routing entry */ 903 904 if (!pirq_table) 905 return 0; 906 907 info = pirq_get_info(dev); 908 if (!info) { 909 dev_dbg(&dev->dev, "PCI INT %c not found in routing table\n", 910 'A' + pin - 1); 911 return 0; 912 } 913 pirq = info->irq[pin - 1].link; 914 mask = info->irq[pin - 1].bitmap; 915 if (!pirq) { 916 dev_dbg(&dev->dev, "PCI INT %c not routed\n", 'A' + pin - 1); 917 return 0; 918 } 919 dev_dbg(&dev->dev, "PCI INT %c -> PIRQ %02x, mask %04x, excl %04x", 920 'A' + pin - 1, pirq, mask, pirq_table->exclusive_irqs); 921 mask &= pcibios_irq_mask; 922 923 /* Work around broken HP Pavilion Notebooks which assign USB to 924 IRQ 9 even though it is actually wired to IRQ 11 */ 925 926 if (broken_hp_bios_irq9 && pirq == 0x59 && dev->irq == 9) { 927 dev->irq = 11; 928 pci_write_config_byte(dev, PCI_INTERRUPT_LINE, 11); 929 r->set(pirq_router_dev, dev, pirq, 11); 930 } 931 932 /* same for Acer Travelmate 360, but with CB and irq 11 -> 10 */ 933 if (acer_tm360_irqrouting && dev->irq == 11 && 934 dev->vendor == PCI_VENDOR_ID_O2) { 935 pirq = 0x68; 936 mask = 0x400; 937 dev->irq = r->get(pirq_router_dev, dev, pirq); 938 pci_write_config_byte(dev, PCI_INTERRUPT_LINE, dev->irq); 939 } 940 941 /* 942 * Find the best IRQ to assign: use the one 943 * reported by the device if possible. 944 */ 945 newirq = dev->irq; 946 if (newirq && !((1 << newirq) & mask)) { 947 if (pci_probe & PCI_USE_PIRQ_MASK) 948 newirq = 0; 949 else 950 dev_warn(&dev->dev, "IRQ %d doesn't match PIRQ mask " 951 "%#x; try pci=usepirqmask\n", newirq, mask); 952 } 953 if (!newirq && assign) { 954 for (i = 0; i < 16; i++) { 955 if (!(mask & (1 << i))) 956 continue; 957 if (pirq_penalty[i] < pirq_penalty[newirq] && 958 can_request_irq(i, IRQF_SHARED)) 959 newirq = i; 960 } 961 } 962 dev_dbg(&dev->dev, "PCI INT %c -> newirq %d", 'A' + pin - 1, newirq); 963 964 /* Check if it is hardcoded */ 965 if ((pirq & 0xf0) == 0xf0) { 966 irq = pirq & 0xf; 967 msg = "hardcoded"; 968 } else if (r->get && (irq = r->get(pirq_router_dev, dev, pirq)) && \ 969 ((!(pci_probe & PCI_USE_PIRQ_MASK)) || ((1 << irq) & mask))) { 970 msg = "found"; 971 elcr_set_level_irq(irq); 972 } else if (newirq && r->set && 973 (dev->class >> 8) != PCI_CLASS_DISPLAY_VGA) { 974 if (r->set(pirq_router_dev, dev, pirq, newirq)) { 975 elcr_set_level_irq(newirq); 976 msg = "assigned"; 977 irq = newirq; 978 } 979 } 980 981 if (!irq) { 982 if (newirq && mask == (1 << newirq)) { 983 msg = "guessed"; 984 irq = newirq; 985 } else { 986 dev_dbg(&dev->dev, "can't route interrupt\n"); 987 return 0; 988 } 989 } 990 dev_info(&dev->dev, "%s PCI INT %c -> IRQ %d\n", msg, 'A' + pin - 1, irq); 991 992 /* Update IRQ for all devices with the same pirq value */ 993 for_each_pci_dev(dev2) { 994 pci_read_config_byte(dev2, PCI_INTERRUPT_PIN, &pin); 995 if (!pin) 996 continue; 997 998 info = pirq_get_info(dev2); 999 if (!info) 1000 continue; 1001 if (info->irq[pin - 1].link == pirq) { 1002 /* 1003 * We refuse to override the dev->irq 1004 * information. Give a warning! 1005 */ 1006 if (dev2->irq && dev2->irq != irq && \ 1007 (!(pci_probe & PCI_USE_PIRQ_MASK) || \ 1008 ((1 << dev2->irq) & mask))) { 1009 #ifndef CONFIG_PCI_MSI 1010 dev_info(&dev2->dev, "IRQ routing conflict: " 1011 "have IRQ %d, want IRQ %d\n", 1012 dev2->irq, irq); 1013 #endif 1014 continue; 1015 } 1016 dev2->irq = irq; 1017 pirq_penalty[irq]++; 1018 if (dev != dev2) 1019 dev_info(&dev->dev, "sharing IRQ %d with %s\n", 1020 irq, pci_name(dev2)); 1021 } 1022 } 1023 return 1; 1024 } 1025 1026 void __init pcibios_fixup_irqs(void) 1027 { 1028 struct pci_dev *dev = NULL; 1029 u8 pin; 1030 1031 DBG(KERN_DEBUG "PCI: IRQ fixup\n"); 1032 for_each_pci_dev(dev) { 1033 /* 1034 * If the BIOS has set an out of range IRQ number, just 1035 * ignore it. Also keep track of which IRQ's are 1036 * already in use. 1037 */ 1038 if (dev->irq >= 16) { 1039 dev_dbg(&dev->dev, "ignoring bogus IRQ %d\n", dev->irq); 1040 dev->irq = 0; 1041 } 1042 /* 1043 * If the IRQ is already assigned to a PCI device, 1044 * ignore its ISA use penalty 1045 */ 1046 if (pirq_penalty[dev->irq] >= 100 && 1047 pirq_penalty[dev->irq] < 100000) 1048 pirq_penalty[dev->irq] = 0; 1049 pirq_penalty[dev->irq]++; 1050 } 1051 1052 if (io_apic_assign_pci_irqs) 1053 return; 1054 1055 dev = NULL; 1056 for_each_pci_dev(dev) { 1057 pci_read_config_byte(dev, PCI_INTERRUPT_PIN, &pin); 1058 if (!pin) 1059 continue; 1060 1061 /* 1062 * Still no IRQ? Try to lookup one... 1063 */ 1064 if (!dev->irq) 1065 pcibios_lookup_irq(dev, 0); 1066 } 1067 } 1068 1069 /* 1070 * Work around broken HP Pavilion Notebooks which assign USB to 1071 * IRQ 9 even though it is actually wired to IRQ 11 1072 */ 1073 static int __init fix_broken_hp_bios_irq9(const struct dmi_system_id *d) 1074 { 1075 if (!broken_hp_bios_irq9) { 1076 broken_hp_bios_irq9 = 1; 1077 printk(KERN_INFO "%s detected - fixing broken IRQ routing\n", 1078 d->ident); 1079 } 1080 return 0; 1081 } 1082 1083 /* 1084 * Work around broken Acer TravelMate 360 Notebooks which assign 1085 * Cardbus to IRQ 11 even though it is actually wired to IRQ 10 1086 */ 1087 static int __init fix_acer_tm360_irqrouting(const struct dmi_system_id *d) 1088 { 1089 if (!acer_tm360_irqrouting) { 1090 acer_tm360_irqrouting = 1; 1091 printk(KERN_INFO "%s detected - fixing broken IRQ routing\n", 1092 d->ident); 1093 } 1094 return 0; 1095 } 1096 1097 static const struct dmi_system_id pciirq_dmi_table[] __initconst = { 1098 { 1099 .callback = fix_broken_hp_bios_irq9, 1100 .ident = "HP Pavilion N5400 Series Laptop", 1101 .matches = { 1102 DMI_MATCH(DMI_SYS_VENDOR, "Hewlett-Packard"), 1103 DMI_MATCH(DMI_BIOS_VERSION, "GE.M1.03"), 1104 DMI_MATCH(DMI_PRODUCT_VERSION, 1105 "HP Pavilion Notebook Model GE"), 1106 DMI_MATCH(DMI_BOARD_VERSION, "OmniBook N32N-736"), 1107 }, 1108 }, 1109 { 1110 .callback = fix_acer_tm360_irqrouting, 1111 .ident = "Acer TravelMate 36x Laptop", 1112 .matches = { 1113 DMI_MATCH(DMI_SYS_VENDOR, "Acer"), 1114 DMI_MATCH(DMI_PRODUCT_NAME, "TravelMate 360"), 1115 }, 1116 }, 1117 { } 1118 }; 1119 1120 void __init pcibios_irq_init(void) 1121 { 1122 struct irq_routing_table *rtable = NULL; 1123 1124 DBG(KERN_DEBUG "PCI: IRQ init\n"); 1125 1126 if (raw_pci_ops == NULL) 1127 return; 1128 1129 dmi_check_system(pciirq_dmi_table); 1130 1131 pirq_table = pirq_find_routing_table(); 1132 1133 #ifdef CONFIG_PCI_BIOS 1134 if (!pirq_table && (pci_probe & PCI_BIOS_IRQ_SCAN)) { 1135 pirq_table = pcibios_get_irq_routing_table(); 1136 rtable = pirq_table; 1137 } 1138 #endif 1139 if (pirq_table) { 1140 pirq_peer_trick(); 1141 pirq_find_router(&pirq_router); 1142 if (pirq_table->exclusive_irqs) { 1143 int i; 1144 for (i = 0; i < 16; i++) 1145 if (!(pirq_table->exclusive_irqs & (1 << i))) 1146 pirq_penalty[i] += 100; 1147 } 1148 /* 1149 * If we're using the I/O APIC, avoid using the PCI IRQ 1150 * routing table 1151 */ 1152 if (io_apic_assign_pci_irqs) { 1153 kfree(rtable); 1154 pirq_table = NULL; 1155 } 1156 } 1157 1158 x86_init.pci.fixup_irqs(); 1159 1160 if (io_apic_assign_pci_irqs && pci_routeirq) { 1161 struct pci_dev *dev = NULL; 1162 /* 1163 * PCI IRQ routing is set up by pci_enable_device(), but we 1164 * also do it here in case there are still broken drivers that 1165 * don't use pci_enable_device(). 1166 */ 1167 printk(KERN_INFO "PCI: Routing PCI interrupts for all devices because \"pci=routeirq\" specified\n"); 1168 for_each_pci_dev(dev) 1169 pirq_enable_irq(dev); 1170 } 1171 } 1172 1173 static void pirq_penalize_isa_irq(int irq, int active) 1174 { 1175 /* 1176 * If any ISAPnP device reports an IRQ in its list of possible 1177 * IRQ's, we try to avoid assigning it to PCI devices. 1178 */ 1179 if (irq < 16) { 1180 if (active) 1181 pirq_penalty[irq] += 1000; 1182 else 1183 pirq_penalty[irq] += 100; 1184 } 1185 } 1186 1187 void pcibios_penalize_isa_irq(int irq, int active) 1188 { 1189 #ifdef CONFIG_ACPI 1190 if (!acpi_noirq) 1191 acpi_penalize_isa_irq(irq, active); 1192 else 1193 #endif 1194 pirq_penalize_isa_irq(irq, active); 1195 } 1196 1197 static int pirq_enable_irq(struct pci_dev *dev) 1198 { 1199 u8 pin = 0; 1200 1201 pci_read_config_byte(dev, PCI_INTERRUPT_PIN, &pin); 1202 if (pin && !pcibios_lookup_irq(dev, 1)) { 1203 char *msg = ""; 1204 1205 if (!io_apic_assign_pci_irqs && dev->irq) 1206 return 0; 1207 1208 if (io_apic_assign_pci_irqs) { 1209 #ifdef CONFIG_X86_IO_APIC 1210 struct pci_dev *temp_dev; 1211 int irq; 1212 1213 if (dev->irq_managed && dev->irq > 0) 1214 return 0; 1215 1216 irq = IO_APIC_get_PCI_irq_vector(dev->bus->number, 1217 PCI_SLOT(dev->devfn), pin - 1); 1218 /* 1219 * Busses behind bridges are typically not listed in the MP-table. 1220 * In this case we have to look up the IRQ based on the parent bus, 1221 * parent slot, and pin number. The SMP code detects such bridged 1222 * busses itself so we should get into this branch reliably. 1223 */ 1224 temp_dev = dev; 1225 while (irq < 0 && dev->bus->parent) { /* go back to the bridge */ 1226 struct pci_dev *bridge = dev->bus->self; 1227 1228 pin = pci_swizzle_interrupt_pin(dev, pin); 1229 irq = IO_APIC_get_PCI_irq_vector(bridge->bus->number, 1230 PCI_SLOT(bridge->devfn), 1231 pin - 1); 1232 if (irq >= 0) 1233 dev_warn(&dev->dev, "using bridge %s " 1234 "INT %c to get IRQ %d\n", 1235 pci_name(bridge), 'A' + pin - 1, 1236 irq); 1237 dev = bridge; 1238 } 1239 dev = temp_dev; 1240 if (irq >= 0) { 1241 dev->irq_managed = 1; 1242 dev->irq = irq; 1243 dev_info(&dev->dev, "PCI->APIC IRQ transform: " 1244 "INT %c -> IRQ %d\n", 'A' + pin - 1, irq); 1245 return 0; 1246 } else 1247 msg = "; probably buggy MP table"; 1248 #endif 1249 } else if (pci_probe & PCI_BIOS_IRQ_SCAN) 1250 msg = ""; 1251 else 1252 msg = "; please try using pci=biosirq"; 1253 1254 /* 1255 * With IDE legacy devices the IRQ lookup failure is not 1256 * a problem.. 1257 */ 1258 if (dev->class >> 8 == PCI_CLASS_STORAGE_IDE && 1259 !(dev->class & 0x5)) 1260 return 0; 1261 1262 dev_warn(&dev->dev, "can't find IRQ for PCI INT %c%s\n", 1263 'A' + pin - 1, msg); 1264 } 1265 return 0; 1266 } 1267 1268 bool mp_should_keep_irq(struct device *dev) 1269 { 1270 if (dev->power.is_prepared) 1271 return true; 1272 #ifdef CONFIG_PM 1273 if (dev->power.runtime_status == RPM_SUSPENDING) 1274 return true; 1275 #endif 1276 1277 return false; 1278 } 1279 1280 static void pirq_disable_irq(struct pci_dev *dev) 1281 { 1282 if (io_apic_assign_pci_irqs && !mp_should_keep_irq(&dev->dev) && 1283 dev->irq_managed && dev->irq) { 1284 mp_unmap_irq(dev->irq); 1285 dev->irq = 0; 1286 dev->irq_managed = 0; 1287 } 1288 } 1289