xref: /openbmc/linux/arch/x86/pci/i386.c (revision 54525552)
1 /*
2  *	Low-Level PCI Access for i386 machines
3  *
4  * Copyright 1993, 1994 Drew Eckhardt
5  *      Visionary Computing
6  *      (Unix and Linux consulting and custom programming)
7  *      Drew@Colorado.EDU
8  *      +1 (303) 786-7975
9  *
10  * Drew's work was sponsored by:
11  *	iX Multiuser Multitasking Magazine
12  *	Hannover, Germany
13  *	hm@ix.de
14  *
15  * Copyright 1997--2000 Martin Mares <mj@ucw.cz>
16  *
17  * For more information, please consult the following manuals (look at
18  * http://www.pcisig.com/ for how to get them):
19  *
20  * PCI BIOS Specification
21  * PCI Local Bus Specification
22  * PCI to PCI Bridge Specification
23  * PCI System Design Guide
24  *
25  */
26 
27 #include <linux/types.h>
28 #include <linux/kernel.h>
29 #include <linux/pci.h>
30 #include <linux/init.h>
31 #include <linux/ioport.h>
32 #include <linux/errno.h>
33 #include <linux/bootmem.h>
34 
35 #include <asm/pat.h>
36 #include <asm/e820.h>
37 #include <asm/pci_x86.h>
38 #include <asm/io_apic.h>
39 
40 
41 static int
42 skip_isa_ioresource_align(struct pci_dev *dev) {
43 
44 	if ((pci_probe & PCI_CAN_SKIP_ISA_ALIGN) &&
45 	    !(dev->bus->bridge_ctl & PCI_BRIDGE_CTL_ISA))
46 		return 1;
47 	return 0;
48 }
49 
50 /*
51  * We need to avoid collisions with `mirrored' VGA ports
52  * and other strange ISA hardware, so we always want the
53  * addresses to be allocated in the 0x000-0x0ff region
54  * modulo 0x400.
55  *
56  * Why? Because some silly external IO cards only decode
57  * the low 10 bits of the IO address. The 0x00-0xff region
58  * is reserved for motherboard devices that decode all 16
59  * bits, so it's ok to allocate at, say, 0x2800-0x28ff,
60  * but we want to try to avoid allocating at 0x2900-0x2bff
61  * which might have be mirrored at 0x0100-0x03ff..
62  */
63 resource_size_t
64 pcibios_align_resource(void *data, const struct resource *res,
65 			resource_size_t size, resource_size_t align)
66 {
67 	struct pci_dev *dev = data;
68 	resource_size_t start = res->start;
69 
70 	if (res->flags & IORESOURCE_IO) {
71 		if (skip_isa_ioresource_align(dev))
72 			return start;
73 		if (start & 0x300)
74 			start = (start + 0x3ff) & ~0x3ff;
75 	}
76 	return start;
77 }
78 EXPORT_SYMBOL(pcibios_align_resource);
79 
80 /*
81  *  Handle resources of PCI devices.  If the world were perfect, we could
82  *  just allocate all the resource regions and do nothing more.  It isn't.
83  *  On the other hand, we cannot just re-allocate all devices, as it would
84  *  require us to know lots of host bridge internals.  So we attempt to
85  *  keep as much of the original configuration as possible, but tweak it
86  *  when it's found to be wrong.
87  *
88  *  Known BIOS problems we have to work around:
89  *	- I/O or memory regions not configured
90  *	- regions configured, but not enabled in the command register
91  *	- bogus I/O addresses above 64K used
92  *	- expansion ROMs left enabled (this may sound harmless, but given
93  *	  the fact the PCI specs explicitly allow address decoders to be
94  *	  shared between expansion ROMs and other resource regions, it's
95  *	  at least dangerous)
96  *	- bad resource sizes or overlaps with other regions
97  *
98  *  Our solution:
99  *	(1) Allocate resources for all buses behind PCI-to-PCI bridges.
100  *	    This gives us fixed barriers on where we can allocate.
101  *	(2) Allocate resources for all enabled devices.  If there is
102  *	    a collision, just mark the resource as unallocated. Also
103  *	    disable expansion ROMs during this step.
104  *	(3) Try to allocate resources for disabled devices.  If the
105  *	    resources were assigned correctly, everything goes well,
106  *	    if they weren't, they won't disturb allocation of other
107  *	    resources.
108  *	(4) Assign new addresses to resources which were either
109  *	    not configured at all or misconfigured.  If explicitly
110  *	    requested by the user, configure expansion ROM address
111  *	    as well.
112  */
113 
114 static void __init pcibios_allocate_bus_resources(struct list_head *bus_list)
115 {
116 	struct pci_bus *bus;
117 	struct pci_dev *dev;
118 	int idx;
119 	struct resource *r;
120 
121 	/* Depth-First Search on bus tree */
122 	list_for_each_entry(bus, bus_list, node) {
123 		if ((dev = bus->self)) {
124 			for (idx = PCI_BRIDGE_RESOURCES;
125 			    idx < PCI_NUM_RESOURCES; idx++) {
126 				r = &dev->resource[idx];
127 				if (!r->flags)
128 					continue;
129 				if (!r->start ||
130 				    pci_claim_resource(dev, idx) < 0) {
131 					/*
132 					 * Something is wrong with the region.
133 					 * Invalidate the resource to prevent
134 					 * child resource allocations in this
135 					 * range.
136 					 */
137 					r->start = r->end = 0;
138 					r->flags = 0;
139 				}
140 			}
141 		}
142 		pcibios_allocate_bus_resources(&bus->children);
143 	}
144 }
145 
146 struct pci_check_idx_range {
147 	int start;
148 	int end;
149 };
150 
151 static void __init pcibios_allocate_resources(int pass)
152 {
153 	struct pci_dev *dev = NULL;
154 	int idx, disabled, i;
155 	u16 command;
156 	struct resource *r;
157 
158 	struct pci_check_idx_range idx_range[] = {
159 		{ PCI_STD_RESOURCES, PCI_STD_RESOURCE_END },
160 #ifdef CONFIG_PCI_IOV
161 		{ PCI_IOV_RESOURCES, PCI_IOV_RESOURCE_END },
162 #endif
163 	};
164 
165 	for_each_pci_dev(dev) {
166 		pci_read_config_word(dev, PCI_COMMAND, &command);
167 		for (i = 0; i < ARRAY_SIZE(idx_range); i++)
168 		for (idx = idx_range[i].start; idx <= idx_range[i].end; idx++) {
169 			r = &dev->resource[idx];
170 			if (r->parent)		/* Already allocated */
171 				continue;
172 			if (!r->start)		/* Address not assigned at all */
173 				continue;
174 			if (r->flags & IORESOURCE_IO)
175 				disabled = !(command & PCI_COMMAND_IO);
176 			else
177 				disabled = !(command & PCI_COMMAND_MEMORY);
178 			if (pass == disabled) {
179 				dev_dbg(&dev->dev,
180 					"BAR %d: reserving %pr (d=%d, p=%d)\n",
181 					idx, r, disabled, pass);
182 				if (pci_claim_resource(dev, idx) < 0) {
183 					/* We'll assign a new address later */
184 					dev->fw_addr[idx] = r->start;
185 					r->end -= r->start;
186 					r->start = 0;
187 				}
188 			}
189 		}
190 		if (!pass) {
191 			r = &dev->resource[PCI_ROM_RESOURCE];
192 			if (r->flags & IORESOURCE_ROM_ENABLE) {
193 				/* Turn the ROM off, leave the resource region,
194 				 * but keep it unregistered. */
195 				u32 reg;
196 				dev_dbg(&dev->dev, "disabling ROM %pR\n", r);
197 				r->flags &= ~IORESOURCE_ROM_ENABLE;
198 				pci_read_config_dword(dev,
199 						dev->rom_base_reg, &reg);
200 				pci_write_config_dword(dev, dev->rom_base_reg,
201 						reg & ~PCI_ROM_ADDRESS_ENABLE);
202 			}
203 		}
204 	}
205 }
206 
207 static int __init pcibios_assign_resources(void)
208 {
209 	struct pci_dev *dev = NULL;
210 	struct resource *r;
211 
212 	if (!(pci_probe & PCI_ASSIGN_ROMS)) {
213 		/*
214 		 * Try to use BIOS settings for ROMs, otherwise let
215 		 * pci_assign_unassigned_resources() allocate the new
216 		 * addresses.
217 		 */
218 		for_each_pci_dev(dev) {
219 			r = &dev->resource[PCI_ROM_RESOURCE];
220 			if (!r->flags || !r->start)
221 				continue;
222 			if (pci_claim_resource(dev, PCI_ROM_RESOURCE) < 0) {
223 				r->end -= r->start;
224 				r->start = 0;
225 			}
226 		}
227 	}
228 
229 	pci_assign_unassigned_resources();
230 
231 	return 0;
232 }
233 
234 void __init pcibios_resource_survey(void)
235 {
236 	DBG("PCI: Allocating resources\n");
237 	pcibios_allocate_bus_resources(&pci_root_buses);
238 	pcibios_allocate_resources(0);
239 	pcibios_allocate_resources(1);
240 
241 	e820_reserve_resources_late();
242 	/*
243 	 * Insert the IO APIC resources after PCI initialization has
244 	 * occurred to handle IO APICS that are mapped in on a BAR in
245 	 * PCI space, but before trying to assign unassigned pci res.
246 	 */
247 	ioapic_insert_resources();
248 }
249 
250 /**
251  * called in fs_initcall (one below subsys_initcall),
252  * give a chance for motherboard reserve resources
253  */
254 fs_initcall(pcibios_assign_resources);
255 
256 /*
257  *  If we set up a device for bus mastering, we need to check the latency
258  *  timer as certain crappy BIOSes forget to set it properly.
259  */
260 unsigned int pcibios_max_latency = 255;
261 
262 void pcibios_set_master(struct pci_dev *dev)
263 {
264 	u8 lat;
265 	pci_read_config_byte(dev, PCI_LATENCY_TIMER, &lat);
266 	if (lat < 16)
267 		lat = (64 <= pcibios_max_latency) ? 64 : pcibios_max_latency;
268 	else if (lat > pcibios_max_latency)
269 		lat = pcibios_max_latency;
270 	else
271 		return;
272 	dev_printk(KERN_DEBUG, &dev->dev, "setting latency timer to %d\n", lat);
273 	pci_write_config_byte(dev, PCI_LATENCY_TIMER, lat);
274 }
275 
276 static const struct vm_operations_struct pci_mmap_ops = {
277 	.access = generic_access_phys,
278 };
279 
280 int pci_mmap_page_range(struct pci_dev *dev, struct vm_area_struct *vma,
281 			enum pci_mmap_state mmap_state, int write_combine)
282 {
283 	unsigned long prot;
284 
285 	/* I/O space cannot be accessed via normal processor loads and
286 	 * stores on this platform.
287 	 */
288 	if (mmap_state == pci_mmap_io)
289 		return -EINVAL;
290 
291 	prot = pgprot_val(vma->vm_page_prot);
292 
293 	/*
294  	 * Return error if pat is not enabled and write_combine is requested.
295  	 * Caller can followup with UC MINUS request and add a WC mtrr if there
296  	 * is a free mtrr slot.
297  	 */
298 	if (!pat_enabled && write_combine)
299 		return -EINVAL;
300 
301 	if (pat_enabled && write_combine)
302 		prot |= _PAGE_CACHE_WC;
303 	else if (pat_enabled || boot_cpu_data.x86 > 3)
304 		/*
305 		 * ioremap() and ioremap_nocache() defaults to UC MINUS for now.
306 		 * To avoid attribute conflicts, request UC MINUS here
307 		 * as well.
308 		 */
309 		prot |= _PAGE_CACHE_UC_MINUS;
310 
311 	prot |= _PAGE_IOMAP;	/* creating a mapping for IO */
312 
313 	vma->vm_page_prot = __pgprot(prot);
314 
315 	if (io_remap_pfn_range(vma, vma->vm_start, vma->vm_pgoff,
316 			       vma->vm_end - vma->vm_start,
317 			       vma->vm_page_prot))
318 		return -EAGAIN;
319 
320 	vma->vm_ops = &pci_mmap_ops;
321 
322 	return 0;
323 }
324