1 /* 2 * Exceptions for specific devices. Usually work-arounds for fatal design flaws. 3 */ 4 5 #include <linux/delay.h> 6 #include <linux/dmi.h> 7 #include <linux/pci.h> 8 #include <linux/init.h> 9 #include "pci.h" 10 11 12 static void __devinit pci_fixup_i450nx(struct pci_dev *d) 13 { 14 /* 15 * i450NX -- Find and scan all secondary buses on all PXB's. 16 */ 17 int pxb, reg; 18 u8 busno, suba, subb; 19 20 dev_warn(&d->dev, "Searching for i450NX host bridges\n"); 21 reg = 0xd0; 22 for(pxb = 0; pxb < 2; pxb++) { 23 pci_read_config_byte(d, reg++, &busno); 24 pci_read_config_byte(d, reg++, &suba); 25 pci_read_config_byte(d, reg++, &subb); 26 DBG("i450NX PXB %d: %02x/%02x/%02x\n", pxb, busno, suba, subb); 27 if (busno) 28 pci_scan_bus_with_sysdata(busno); /* Bus A */ 29 if (suba < subb) 30 pci_scan_bus_with_sysdata(suba+1); /* Bus B */ 31 } 32 pcibios_last_bus = -1; 33 } 34 DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_82451NX, pci_fixup_i450nx); 35 36 static void __devinit pci_fixup_i450gx(struct pci_dev *d) 37 { 38 /* 39 * i450GX and i450KX -- Find and scan all secondary buses. 40 * (called separately for each PCI bridge found) 41 */ 42 u8 busno; 43 pci_read_config_byte(d, 0x4a, &busno); 44 dev_info(&d->dev, "i440KX/GX host bridge; secondary bus %02x\n", busno); 45 pci_scan_bus_with_sysdata(busno); 46 pcibios_last_bus = -1; 47 } 48 DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_82454GX, pci_fixup_i450gx); 49 50 static void __devinit pci_fixup_umc_ide(struct pci_dev *d) 51 { 52 /* 53 * UM8886BF IDE controller sets region type bits incorrectly, 54 * therefore they look like memory despite of them being I/O. 55 */ 56 int i; 57 58 dev_warn(&d->dev, "Fixing base address flags\n"); 59 for(i = 0; i < 4; i++) 60 d->resource[i].flags |= PCI_BASE_ADDRESS_SPACE_IO; 61 } 62 DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_UMC, PCI_DEVICE_ID_UMC_UM8886BF, pci_fixup_umc_ide); 63 64 static void __devinit pci_fixup_ncr53c810(struct pci_dev *d) 65 { 66 /* 67 * NCR 53C810 returns class code 0 (at least on some systems). 68 * Fix class to be PCI_CLASS_STORAGE_SCSI 69 */ 70 if (!d->class) { 71 dev_warn(&d->dev, "Fixing NCR 53C810 class code\n"); 72 d->class = PCI_CLASS_STORAGE_SCSI << 8; 73 } 74 } 75 DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_NCR, PCI_DEVICE_ID_NCR_53C810, pci_fixup_ncr53c810); 76 77 static void __devinit pci_fixup_latency(struct pci_dev *d) 78 { 79 /* 80 * SiS 5597 and 5598 chipsets require latency timer set to 81 * at most 32 to avoid lockups. 82 */ 83 dev_dbg(&d->dev, "Setting max latency to 32\n"); 84 pcibios_max_latency = 32; 85 } 86 DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_SI, PCI_DEVICE_ID_SI_5597, pci_fixup_latency); 87 DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_SI, PCI_DEVICE_ID_SI_5598, pci_fixup_latency); 88 89 static void __devinit pci_fixup_piix4_acpi(struct pci_dev *d) 90 { 91 /* 92 * PIIX4 ACPI device: hardwired IRQ9 93 */ 94 d->irq = 9; 95 } 96 DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_82371AB_3, pci_fixup_piix4_acpi); 97 98 /* 99 * Addresses issues with problems in the memory write queue timer in 100 * certain VIA Northbridges. This bugfix is per VIA's specifications, 101 * except for the KL133/KM133: clearing bit 5 on those Northbridges seems 102 * to trigger a bug in its integrated ProSavage video card, which 103 * causes screen corruption. We only clear bits 6 and 7 for that chipset, 104 * until VIA can provide us with definitive information on why screen 105 * corruption occurs, and what exactly those bits do. 106 * 107 * VIA 8363,8622,8361 Northbridges: 108 * - bits 5, 6, 7 at offset 0x55 need to be turned off 109 * VIA 8367 (KT266x) Northbridges: 110 * - bits 5, 6, 7 at offset 0x95 need to be turned off 111 * VIA 8363 rev 0x81/0x84 (KL133/KM133) Northbridges: 112 * - bits 6, 7 at offset 0x55 need to be turned off 113 */ 114 115 #define VIA_8363_KL133_REVISION_ID 0x81 116 #define VIA_8363_KM133_REVISION_ID 0x84 117 118 static void pci_fixup_via_northbridge_bug(struct pci_dev *d) 119 { 120 u8 v; 121 int where = 0x55; 122 int mask = 0x1f; /* clear bits 5, 6, 7 by default */ 123 124 if (d->device == PCI_DEVICE_ID_VIA_8367_0) { 125 /* fix pci bus latency issues resulted by NB bios error 126 it appears on bug free^Wreduced kt266x's bios forces 127 NB latency to zero */ 128 pci_write_config_byte(d, PCI_LATENCY_TIMER, 0); 129 130 where = 0x95; /* the memory write queue timer register is 131 different for the KT266x's: 0x95 not 0x55 */ 132 } else if (d->device == PCI_DEVICE_ID_VIA_8363_0 && 133 (d->revision == VIA_8363_KL133_REVISION_ID || 134 d->revision == VIA_8363_KM133_REVISION_ID)) { 135 mask = 0x3f; /* clear only bits 6 and 7; clearing bit 5 136 causes screen corruption on the KL133/KM133 */ 137 } 138 139 pci_read_config_byte(d, where, &v); 140 if (v & ~mask) { 141 dev_warn(&d->dev, "Disabling VIA memory write queue (PCI ID %04x, rev %02x): [%02x] %02x & %02x -> %02x\n", \ 142 d->device, d->revision, where, v, mask, v & mask); 143 v &= mask; 144 pci_write_config_byte(d, where, v); 145 } 146 } 147 DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_VIA, PCI_DEVICE_ID_VIA_8363_0, pci_fixup_via_northbridge_bug); 148 DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_VIA, PCI_DEVICE_ID_VIA_8622, pci_fixup_via_northbridge_bug); 149 DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_VIA, PCI_DEVICE_ID_VIA_8361, pci_fixup_via_northbridge_bug); 150 DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_VIA, PCI_DEVICE_ID_VIA_8367_0, pci_fixup_via_northbridge_bug); 151 DECLARE_PCI_FIXUP_RESUME(PCI_VENDOR_ID_VIA, PCI_DEVICE_ID_VIA_8363_0, pci_fixup_via_northbridge_bug); 152 DECLARE_PCI_FIXUP_RESUME(PCI_VENDOR_ID_VIA, PCI_DEVICE_ID_VIA_8622, pci_fixup_via_northbridge_bug); 153 DECLARE_PCI_FIXUP_RESUME(PCI_VENDOR_ID_VIA, PCI_DEVICE_ID_VIA_8361, pci_fixup_via_northbridge_bug); 154 DECLARE_PCI_FIXUP_RESUME(PCI_VENDOR_ID_VIA, PCI_DEVICE_ID_VIA_8367_0, pci_fixup_via_northbridge_bug); 155 156 /* 157 * For some reasons Intel decided that certain parts of their 158 * 815, 845 and some other chipsets must look like PCI-to-PCI bridges 159 * while they are obviously not. The 82801 family (AA, AB, BAM/CAM, 160 * BA/CA/DB and E) PCI bridges are actually HUB-to-PCI ones, according 161 * to Intel terminology. These devices do forward all addresses from 162 * system to PCI bus no matter what are their window settings, so they are 163 * "transparent" (or subtractive decoding) from programmers point of view. 164 */ 165 static void __devinit pci_fixup_transparent_bridge(struct pci_dev *dev) 166 { 167 if ((dev->class >> 8) == PCI_CLASS_BRIDGE_PCI && 168 (dev->device & 0xff00) == 0x2400) 169 dev->transparent = 1; 170 } 171 DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_INTEL, PCI_ANY_ID, pci_fixup_transparent_bridge); 172 173 /* 174 * Fixup for C1 Halt Disconnect problem on nForce2 systems. 175 * 176 * From information provided by "Allen Martin" <AMartin@nvidia.com>: 177 * 178 * A hang is caused when the CPU generates a very fast CONNECT/HALT cycle 179 * sequence. Workaround is to set the SYSTEM_IDLE_TIMEOUT to 80 ns. 180 * This allows the state-machine and timer to return to a proper state within 181 * 80 ns of the CONNECT and probe appearing together. Since the CPU will not 182 * issue another HALT within 80 ns of the initial HALT, the failure condition 183 * is avoided. 184 */ 185 static void pci_fixup_nforce2(struct pci_dev *dev) 186 { 187 u32 val; 188 189 /* 190 * Chip Old value New value 191 * C17 0x1F0FFF01 0x1F01FF01 192 * C18D 0x9F0FFF01 0x9F01FF01 193 * 194 * Northbridge chip version may be determined by 195 * reading the PCI revision ID (0xC1 or greater is C18D). 196 */ 197 pci_read_config_dword(dev, 0x6c, &val); 198 199 /* 200 * Apply fixup if needed, but don't touch disconnect state 201 */ 202 if ((val & 0x00FF0000) != 0x00010000) { 203 dev_warn(&dev->dev, "nForce2 C1 Halt Disconnect fixup\n"); 204 pci_write_config_dword(dev, 0x6c, (val & 0xFF00FFFF) | 0x00010000); 205 } 206 } 207 DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_NVIDIA, PCI_DEVICE_ID_NVIDIA_NFORCE2, pci_fixup_nforce2); 208 DECLARE_PCI_FIXUP_RESUME(PCI_VENDOR_ID_NVIDIA, PCI_DEVICE_ID_NVIDIA_NFORCE2, pci_fixup_nforce2); 209 210 /* Max PCI Express root ports */ 211 #define MAX_PCIEROOT 6 212 static int quirk_aspm_offset[MAX_PCIEROOT << 3]; 213 214 #define GET_INDEX(a, b) ((((a) - PCI_DEVICE_ID_INTEL_MCH_PA) << 3) + ((b) & 7)) 215 216 static int quirk_pcie_aspm_read(struct pci_bus *bus, unsigned int devfn, int where, int size, u32 *value) 217 { 218 return raw_pci_ops->read(0, bus->number, devfn, where, size, value); 219 } 220 221 /* 222 * Replace the original pci bus ops for write with a new one that will filter 223 * the request to insure ASPM cannot be enabled. 224 */ 225 static int quirk_pcie_aspm_write(struct pci_bus *bus, unsigned int devfn, int where, int size, u32 value) 226 { 227 u8 offset; 228 229 offset = quirk_aspm_offset[GET_INDEX(bus->self->device, devfn)]; 230 231 if ((offset) && (where == offset)) 232 value = value & 0xfffffffc; 233 234 return raw_pci_ops->write(0, bus->number, devfn, where, size, value); 235 } 236 237 static struct pci_ops quirk_pcie_aspm_ops = { 238 .read = quirk_pcie_aspm_read, 239 .write = quirk_pcie_aspm_write, 240 }; 241 242 /* 243 * Prevents PCI Express ASPM (Active State Power Management) being enabled. 244 * 245 * Save the register offset, where the ASPM control bits are located, 246 * for each PCI Express device that is in the device list of 247 * the root port in an array for fast indexing. Replace the bus ops 248 * with the modified one. 249 */ 250 static void pcie_rootport_aspm_quirk(struct pci_dev *pdev) 251 { 252 int cap_base, i; 253 struct pci_bus *pbus; 254 struct pci_dev *dev; 255 256 if ((pbus = pdev->subordinate) == NULL) 257 return; 258 259 /* 260 * Check if the DID of pdev matches one of the six root ports. This 261 * check is needed in the case this function is called directly by the 262 * hot-plug driver. 263 */ 264 if ((pdev->device < PCI_DEVICE_ID_INTEL_MCH_PA) || 265 (pdev->device > PCI_DEVICE_ID_INTEL_MCH_PC1)) 266 return; 267 268 if (list_empty(&pbus->devices)) { 269 /* 270 * If no device is attached to the root port at power-up or 271 * after hot-remove, the pbus->devices is empty and this code 272 * will set the offsets to zero and the bus ops to parent's bus 273 * ops, which is unmodified. 274 */ 275 for (i = GET_INDEX(pdev->device, 0); i <= GET_INDEX(pdev->device, 7); ++i) 276 quirk_aspm_offset[i] = 0; 277 278 pbus->ops = pbus->parent->ops; 279 } else { 280 /* 281 * If devices are attached to the root port at power-up or 282 * after hot-add, the code loops through the device list of 283 * each root port to save the register offsets and replace the 284 * bus ops. 285 */ 286 list_for_each_entry(dev, &pbus->devices, bus_list) { 287 /* There are 0 to 8 devices attached to this bus */ 288 cap_base = pci_find_capability(dev, PCI_CAP_ID_EXP); 289 quirk_aspm_offset[GET_INDEX(pdev->device, dev->devfn)] = cap_base + 0x10; 290 } 291 pbus->ops = &quirk_pcie_aspm_ops; 292 } 293 } 294 DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_MCH_PA, pcie_rootport_aspm_quirk); 295 DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_MCH_PA1, pcie_rootport_aspm_quirk); 296 DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_MCH_PB, pcie_rootport_aspm_quirk); 297 DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_MCH_PB1, pcie_rootport_aspm_quirk); 298 DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_MCH_PC, pcie_rootport_aspm_quirk); 299 DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_MCH_PC1, pcie_rootport_aspm_quirk); 300 301 /* 302 * Fixup to mark boot BIOS video selected by BIOS before it changes 303 * 304 * From information provided by "Jon Smirl" <jonsmirl@gmail.com> 305 * 306 * The standard boot ROM sequence for an x86 machine uses the BIOS 307 * to select an initial video card for boot display. This boot video 308 * card will have it's BIOS copied to C0000 in system RAM. 309 * IORESOURCE_ROM_SHADOW is used to associate the boot video 310 * card with this copy. On laptops this copy has to be used since 311 * the main ROM may be compressed or combined with another image. 312 * See pci_map_rom() for use of this flag. IORESOURCE_ROM_SHADOW 313 * is marked here since the boot video device will be the only enabled 314 * video device at this point. 315 */ 316 317 static void __devinit pci_fixup_video(struct pci_dev *pdev) 318 { 319 struct pci_dev *bridge; 320 struct pci_bus *bus; 321 u16 config; 322 323 if ((pdev->class >> 8) != PCI_CLASS_DISPLAY_VGA) 324 return; 325 326 /* Is VGA routed to us? */ 327 bus = pdev->bus; 328 while (bus) { 329 bridge = bus->self; 330 331 /* 332 * From information provided by 333 * "David Miller" <davem@davemloft.net> 334 * The bridge control register is valid for PCI header 335 * type BRIDGE, or CARDBUS. Host to PCI controllers use 336 * PCI header type NORMAL. 337 */ 338 if (bridge 339 && ((bridge->hdr_type == PCI_HEADER_TYPE_BRIDGE) 340 || (bridge->hdr_type == PCI_HEADER_TYPE_CARDBUS))) { 341 pci_read_config_word(bridge, PCI_BRIDGE_CONTROL, 342 &config); 343 if (!(config & PCI_BRIDGE_CTL_VGA)) 344 return; 345 } 346 bus = bus->parent; 347 } 348 pci_read_config_word(pdev, PCI_COMMAND, &config); 349 if (config & (PCI_COMMAND_IO | PCI_COMMAND_MEMORY)) { 350 pdev->resource[PCI_ROM_RESOURCE].flags |= IORESOURCE_ROM_SHADOW; 351 dev_printk(KERN_DEBUG, &pdev->dev, "Boot video device\n"); 352 } 353 } 354 DECLARE_PCI_FIXUP_FINAL(PCI_ANY_ID, PCI_ANY_ID, pci_fixup_video); 355 356 357 static struct dmi_system_id __devinitdata msi_k8t_dmi_table[] = { 358 { 359 .ident = "MSI-K8T-Neo2Fir", 360 .matches = { 361 DMI_MATCH(DMI_SYS_VENDOR, "MSI"), 362 DMI_MATCH(DMI_PRODUCT_NAME, "MS-6702E"), 363 }, 364 }, 365 {} 366 }; 367 368 /* 369 * The AMD-Athlon64 board MSI "K8T Neo2-FIR" disables the onboard sound 370 * card if a PCI-soundcard is added. 371 * 372 * The BIOS only gives options "DISABLED" and "AUTO". This code sets 373 * the corresponding register-value to enable the soundcard. 374 * 375 * The soundcard is only enabled, if the mainborad is identified 376 * via DMI-tables and the soundcard is detected to be off. 377 */ 378 static void __devinit pci_fixup_msi_k8t_onboard_sound(struct pci_dev *dev) 379 { 380 unsigned char val; 381 if (!dmi_check_system(msi_k8t_dmi_table)) 382 return; /* only applies to MSI K8T Neo2-FIR */ 383 384 pci_read_config_byte(dev, 0x50, &val); 385 if (val & 0x40) { 386 pci_write_config_byte(dev, 0x50, val & (~0x40)); 387 388 /* verify the change for status output */ 389 pci_read_config_byte(dev, 0x50, &val); 390 if (val & 0x40) 391 dev_info(&dev->dev, "Detected MSI K8T Neo2-FIR; " 392 "can't enable onboard soundcard!\n"); 393 else 394 dev_info(&dev->dev, "Detected MSI K8T Neo2-FIR; " 395 "enabled onboard soundcard\n"); 396 } 397 } 398 DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_VIA, PCI_DEVICE_ID_VIA_8237, 399 pci_fixup_msi_k8t_onboard_sound); 400 DECLARE_PCI_FIXUP_RESUME(PCI_VENDOR_ID_VIA, PCI_DEVICE_ID_VIA_8237, 401 pci_fixup_msi_k8t_onboard_sound); 402 403 /* 404 * Some Toshiba laptops need extra code to enable their TI TSB43AB22/A. 405 * 406 * We pretend to bring them out of full D3 state, and restore the proper 407 * IRQ, PCI cache line size, and BARs, otherwise the device won't function 408 * properly. In some cases, the device will generate an interrupt on 409 * the wrong IRQ line, causing any devices sharing the line it's 410 * *supposed* to use to be disabled by the kernel's IRQ debug code. 411 */ 412 static u16 toshiba_line_size; 413 414 static struct dmi_system_id __devinitdata toshiba_ohci1394_dmi_table[] = { 415 { 416 .ident = "Toshiba PS5 based laptop", 417 .matches = { 418 DMI_MATCH(DMI_SYS_VENDOR, "TOSHIBA"), 419 DMI_MATCH(DMI_PRODUCT_VERSION, "PS5"), 420 }, 421 }, 422 { 423 .ident = "Toshiba PSM4 based laptop", 424 .matches = { 425 DMI_MATCH(DMI_SYS_VENDOR, "TOSHIBA"), 426 DMI_MATCH(DMI_PRODUCT_VERSION, "PSM4"), 427 }, 428 }, 429 { 430 .ident = "Toshiba A40 based laptop", 431 .matches = { 432 DMI_MATCH(DMI_SYS_VENDOR, "TOSHIBA"), 433 DMI_MATCH(DMI_PRODUCT_VERSION, "PSA40U"), 434 }, 435 }, 436 { } 437 }; 438 439 static void __devinit pci_pre_fixup_toshiba_ohci1394(struct pci_dev *dev) 440 { 441 if (!dmi_check_system(toshiba_ohci1394_dmi_table)) 442 return; /* only applies to certain Toshibas (so far) */ 443 444 dev->current_state = PCI_D3cold; 445 pci_read_config_word(dev, PCI_CACHE_LINE_SIZE, &toshiba_line_size); 446 } 447 DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_TI, 0x8032, 448 pci_pre_fixup_toshiba_ohci1394); 449 450 static void __devinit pci_post_fixup_toshiba_ohci1394(struct pci_dev *dev) 451 { 452 if (!dmi_check_system(toshiba_ohci1394_dmi_table)) 453 return; /* only applies to certain Toshibas (so far) */ 454 455 /* Restore config space on Toshiba laptops */ 456 pci_write_config_word(dev, PCI_CACHE_LINE_SIZE, toshiba_line_size); 457 pci_read_config_byte(dev, PCI_INTERRUPT_LINE, (u8 *)&dev->irq); 458 pci_write_config_dword(dev, PCI_BASE_ADDRESS_0, 459 pci_resource_start(dev, 0)); 460 pci_write_config_dword(dev, PCI_BASE_ADDRESS_1, 461 pci_resource_start(dev, 1)); 462 } 463 DECLARE_PCI_FIXUP_ENABLE(PCI_VENDOR_ID_TI, 0x8032, 464 pci_post_fixup_toshiba_ohci1394); 465 466 467 /* 468 * Prevent the BIOS trapping accesses to the Cyrix CS5530A video device 469 * configuration space. 470 */ 471 static void pci_early_fixup_cyrix_5530(struct pci_dev *dev) 472 { 473 u8 r; 474 /* clear 'F4 Video Configuration Trap' bit */ 475 pci_read_config_byte(dev, 0x42, &r); 476 r &= 0xfd; 477 pci_write_config_byte(dev, 0x42, r); 478 } 479 DECLARE_PCI_FIXUP_EARLY(PCI_VENDOR_ID_CYRIX, PCI_DEVICE_ID_CYRIX_5530_LEGACY, 480 pci_early_fixup_cyrix_5530); 481 DECLARE_PCI_FIXUP_RESUME(PCI_VENDOR_ID_CYRIX, PCI_DEVICE_ID_CYRIX_5530_LEGACY, 482 pci_early_fixup_cyrix_5530); 483 484 /* 485 * Siemens Nixdorf AG FSC Multiprocessor Interrupt Controller: 486 * prevent update of the BAR0, which doesn't look like a normal BAR. 487 */ 488 static void __devinit pci_siemens_interrupt_controller(struct pci_dev *dev) 489 { 490 dev->resource[0].flags |= IORESOURCE_PCI_FIXED; 491 } 492 DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_SIEMENS, 0x0015, 493 pci_siemens_interrupt_controller); 494