1 /* 2 * Exceptions for specific devices. Usually work-arounds for fatal design flaws. 3 */ 4 5 #include <linux/delay.h> 6 #include <linux/dmi.h> 7 #include <linux/pci.h> 8 #include <linux/vgaarb.h> 9 #include <asm/hpet.h> 10 #include <asm/pci_x86.h> 11 12 static void pci_fixup_i450nx(struct pci_dev *d) 13 { 14 /* 15 * i450NX -- Find and scan all secondary buses on all PXB's. 16 */ 17 int pxb, reg; 18 u8 busno, suba, subb; 19 20 dev_warn(&d->dev, "Searching for i450NX host bridges\n"); 21 reg = 0xd0; 22 for(pxb = 0; pxb < 2; pxb++) { 23 pci_read_config_byte(d, reg++, &busno); 24 pci_read_config_byte(d, reg++, &suba); 25 pci_read_config_byte(d, reg++, &subb); 26 dev_dbg(&d->dev, "i450NX PXB %d: %02x/%02x/%02x\n", pxb, busno, 27 suba, subb); 28 if (busno) 29 pcibios_scan_root(busno); /* Bus A */ 30 if (suba < subb) 31 pcibios_scan_root(suba+1); /* Bus B */ 32 } 33 pcibios_last_bus = -1; 34 } 35 DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_82451NX, pci_fixup_i450nx); 36 37 static void pci_fixup_i450gx(struct pci_dev *d) 38 { 39 /* 40 * i450GX and i450KX -- Find and scan all secondary buses. 41 * (called separately for each PCI bridge found) 42 */ 43 u8 busno; 44 pci_read_config_byte(d, 0x4a, &busno); 45 dev_info(&d->dev, "i440KX/GX host bridge; secondary bus %02x\n", busno); 46 pcibios_scan_root(busno); 47 pcibios_last_bus = -1; 48 } 49 DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_82454GX, pci_fixup_i450gx); 50 51 static void pci_fixup_umc_ide(struct pci_dev *d) 52 { 53 /* 54 * UM8886BF IDE controller sets region type bits incorrectly, 55 * therefore they look like memory despite of them being I/O. 56 */ 57 int i; 58 59 dev_warn(&d->dev, "Fixing base address flags\n"); 60 for(i = 0; i < 4; i++) 61 d->resource[i].flags |= PCI_BASE_ADDRESS_SPACE_IO; 62 } 63 DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_UMC, PCI_DEVICE_ID_UMC_UM8886BF, pci_fixup_umc_ide); 64 65 static void pci_fixup_ncr53c810(struct pci_dev *d) 66 { 67 /* 68 * NCR 53C810 returns class code 0 (at least on some systems). 69 * Fix class to be PCI_CLASS_STORAGE_SCSI 70 */ 71 if (!d->class) { 72 dev_warn(&d->dev, "Fixing NCR 53C810 class code\n"); 73 d->class = PCI_CLASS_STORAGE_SCSI << 8; 74 } 75 } 76 DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_NCR, PCI_DEVICE_ID_NCR_53C810, pci_fixup_ncr53c810); 77 78 static void pci_fixup_latency(struct pci_dev *d) 79 { 80 /* 81 * SiS 5597 and 5598 chipsets require latency timer set to 82 * at most 32 to avoid lockups. 83 */ 84 dev_dbg(&d->dev, "Setting max latency to 32\n"); 85 pcibios_max_latency = 32; 86 } 87 DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_SI, PCI_DEVICE_ID_SI_5597, pci_fixup_latency); 88 DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_SI, PCI_DEVICE_ID_SI_5598, pci_fixup_latency); 89 90 static void pci_fixup_piix4_acpi(struct pci_dev *d) 91 { 92 /* 93 * PIIX4 ACPI device: hardwired IRQ9 94 */ 95 d->irq = 9; 96 } 97 DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_82371AB_3, pci_fixup_piix4_acpi); 98 99 /* 100 * Addresses issues with problems in the memory write queue timer in 101 * certain VIA Northbridges. This bugfix is per VIA's specifications, 102 * except for the KL133/KM133: clearing bit 5 on those Northbridges seems 103 * to trigger a bug in its integrated ProSavage video card, which 104 * causes screen corruption. We only clear bits 6 and 7 for that chipset, 105 * until VIA can provide us with definitive information on why screen 106 * corruption occurs, and what exactly those bits do. 107 * 108 * VIA 8363,8622,8361 Northbridges: 109 * - bits 5, 6, 7 at offset 0x55 need to be turned off 110 * VIA 8367 (KT266x) Northbridges: 111 * - bits 5, 6, 7 at offset 0x95 need to be turned off 112 * VIA 8363 rev 0x81/0x84 (KL133/KM133) Northbridges: 113 * - bits 6, 7 at offset 0x55 need to be turned off 114 */ 115 116 #define VIA_8363_KL133_REVISION_ID 0x81 117 #define VIA_8363_KM133_REVISION_ID 0x84 118 119 static void pci_fixup_via_northbridge_bug(struct pci_dev *d) 120 { 121 u8 v; 122 int where = 0x55; 123 int mask = 0x1f; /* clear bits 5, 6, 7 by default */ 124 125 if (d->device == PCI_DEVICE_ID_VIA_8367_0) { 126 /* fix pci bus latency issues resulted by NB bios error 127 it appears on bug free^Wreduced kt266x's bios forces 128 NB latency to zero */ 129 pci_write_config_byte(d, PCI_LATENCY_TIMER, 0); 130 131 where = 0x95; /* the memory write queue timer register is 132 different for the KT266x's: 0x95 not 0x55 */ 133 } else if (d->device == PCI_DEVICE_ID_VIA_8363_0 && 134 (d->revision == VIA_8363_KL133_REVISION_ID || 135 d->revision == VIA_8363_KM133_REVISION_ID)) { 136 mask = 0x3f; /* clear only bits 6 and 7; clearing bit 5 137 causes screen corruption on the KL133/KM133 */ 138 } 139 140 pci_read_config_byte(d, where, &v); 141 if (v & ~mask) { 142 dev_warn(&d->dev, "Disabling VIA memory write queue (PCI ID %04x, rev %02x): [%02x] %02x & %02x -> %02x\n", \ 143 d->device, d->revision, where, v, mask, v & mask); 144 v &= mask; 145 pci_write_config_byte(d, where, v); 146 } 147 } 148 DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_VIA, PCI_DEVICE_ID_VIA_8363_0, pci_fixup_via_northbridge_bug); 149 DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_VIA, PCI_DEVICE_ID_VIA_8622, pci_fixup_via_northbridge_bug); 150 DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_VIA, PCI_DEVICE_ID_VIA_8361, pci_fixup_via_northbridge_bug); 151 DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_VIA, PCI_DEVICE_ID_VIA_8367_0, pci_fixup_via_northbridge_bug); 152 DECLARE_PCI_FIXUP_RESUME(PCI_VENDOR_ID_VIA, PCI_DEVICE_ID_VIA_8363_0, pci_fixup_via_northbridge_bug); 153 DECLARE_PCI_FIXUP_RESUME(PCI_VENDOR_ID_VIA, PCI_DEVICE_ID_VIA_8622, pci_fixup_via_northbridge_bug); 154 DECLARE_PCI_FIXUP_RESUME(PCI_VENDOR_ID_VIA, PCI_DEVICE_ID_VIA_8361, pci_fixup_via_northbridge_bug); 155 DECLARE_PCI_FIXUP_RESUME(PCI_VENDOR_ID_VIA, PCI_DEVICE_ID_VIA_8367_0, pci_fixup_via_northbridge_bug); 156 157 /* 158 * For some reasons Intel decided that certain parts of their 159 * 815, 845 and some other chipsets must look like PCI-to-PCI bridges 160 * while they are obviously not. The 82801 family (AA, AB, BAM/CAM, 161 * BA/CA/DB and E) PCI bridges are actually HUB-to-PCI ones, according 162 * to Intel terminology. These devices do forward all addresses from 163 * system to PCI bus no matter what are their window settings, so they are 164 * "transparent" (or subtractive decoding) from programmers point of view. 165 */ 166 static void pci_fixup_transparent_bridge(struct pci_dev *dev) 167 { 168 if ((dev->device & 0xff00) == 0x2400) 169 dev->transparent = 1; 170 } 171 DECLARE_PCI_FIXUP_CLASS_HEADER(PCI_VENDOR_ID_INTEL, PCI_ANY_ID, 172 PCI_CLASS_BRIDGE_PCI, 8, pci_fixup_transparent_bridge); 173 174 /* 175 * Fixup for C1 Halt Disconnect problem on nForce2 systems. 176 * 177 * From information provided by "Allen Martin" <AMartin@nvidia.com>: 178 * 179 * A hang is caused when the CPU generates a very fast CONNECT/HALT cycle 180 * sequence. Workaround is to set the SYSTEM_IDLE_TIMEOUT to 80 ns. 181 * This allows the state-machine and timer to return to a proper state within 182 * 80 ns of the CONNECT and probe appearing together. Since the CPU will not 183 * issue another HALT within 80 ns of the initial HALT, the failure condition 184 * is avoided. 185 */ 186 static void pci_fixup_nforce2(struct pci_dev *dev) 187 { 188 u32 val; 189 190 /* 191 * Chip Old value New value 192 * C17 0x1F0FFF01 0x1F01FF01 193 * C18D 0x9F0FFF01 0x9F01FF01 194 * 195 * Northbridge chip version may be determined by 196 * reading the PCI revision ID (0xC1 or greater is C18D). 197 */ 198 pci_read_config_dword(dev, 0x6c, &val); 199 200 /* 201 * Apply fixup if needed, but don't touch disconnect state 202 */ 203 if ((val & 0x00FF0000) != 0x00010000) { 204 dev_warn(&dev->dev, "nForce2 C1 Halt Disconnect fixup\n"); 205 pci_write_config_dword(dev, 0x6c, (val & 0xFF00FFFF) | 0x00010000); 206 } 207 } 208 DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_NVIDIA, PCI_DEVICE_ID_NVIDIA_NFORCE2, pci_fixup_nforce2); 209 DECLARE_PCI_FIXUP_RESUME(PCI_VENDOR_ID_NVIDIA, PCI_DEVICE_ID_NVIDIA_NFORCE2, pci_fixup_nforce2); 210 211 /* Max PCI Express root ports */ 212 #define MAX_PCIEROOT 6 213 static int quirk_aspm_offset[MAX_PCIEROOT << 3]; 214 215 #define GET_INDEX(a, b) ((((a) - PCI_DEVICE_ID_INTEL_MCH_PA) << 3) + ((b) & 7)) 216 217 static int quirk_pcie_aspm_read(struct pci_bus *bus, unsigned int devfn, int where, int size, u32 *value) 218 { 219 return raw_pci_read(pci_domain_nr(bus), bus->number, 220 devfn, where, size, value); 221 } 222 223 /* 224 * Replace the original pci bus ops for write with a new one that will filter 225 * the request to insure ASPM cannot be enabled. 226 */ 227 static int quirk_pcie_aspm_write(struct pci_bus *bus, unsigned int devfn, int where, int size, u32 value) 228 { 229 u8 offset; 230 231 offset = quirk_aspm_offset[GET_INDEX(bus->self->device, devfn)]; 232 233 if ((offset) && (where == offset)) 234 value = value & ~PCI_EXP_LNKCTL_ASPMC; 235 236 return raw_pci_write(pci_domain_nr(bus), bus->number, 237 devfn, where, size, value); 238 } 239 240 static struct pci_ops quirk_pcie_aspm_ops = { 241 .read = quirk_pcie_aspm_read, 242 .write = quirk_pcie_aspm_write, 243 }; 244 245 /* 246 * Prevents PCI Express ASPM (Active State Power Management) being enabled. 247 * 248 * Save the register offset, where the ASPM control bits are located, 249 * for each PCI Express device that is in the device list of 250 * the root port in an array for fast indexing. Replace the bus ops 251 * with the modified one. 252 */ 253 static void pcie_rootport_aspm_quirk(struct pci_dev *pdev) 254 { 255 int i; 256 struct pci_bus *pbus; 257 struct pci_dev *dev; 258 259 if ((pbus = pdev->subordinate) == NULL) 260 return; 261 262 /* 263 * Check if the DID of pdev matches one of the six root ports. This 264 * check is needed in the case this function is called directly by the 265 * hot-plug driver. 266 */ 267 if ((pdev->device < PCI_DEVICE_ID_INTEL_MCH_PA) || 268 (pdev->device > PCI_DEVICE_ID_INTEL_MCH_PC1)) 269 return; 270 271 if (list_empty(&pbus->devices)) { 272 /* 273 * If no device is attached to the root port at power-up or 274 * after hot-remove, the pbus->devices is empty and this code 275 * will set the offsets to zero and the bus ops to parent's bus 276 * ops, which is unmodified. 277 */ 278 for (i = GET_INDEX(pdev->device, 0); i <= GET_INDEX(pdev->device, 7); ++i) 279 quirk_aspm_offset[i] = 0; 280 281 pci_bus_set_ops(pbus, pbus->parent->ops); 282 } else { 283 /* 284 * If devices are attached to the root port at power-up or 285 * after hot-add, the code loops through the device list of 286 * each root port to save the register offsets and replace the 287 * bus ops. 288 */ 289 list_for_each_entry(dev, &pbus->devices, bus_list) 290 /* There are 0 to 8 devices attached to this bus */ 291 quirk_aspm_offset[GET_INDEX(pdev->device, dev->devfn)] = 292 dev->pcie_cap + PCI_EXP_LNKCTL; 293 294 pci_bus_set_ops(pbus, &quirk_pcie_aspm_ops); 295 dev_info(&pbus->dev, "writes to ASPM control bits will be ignored\n"); 296 } 297 298 } 299 DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_MCH_PA, pcie_rootport_aspm_quirk); 300 DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_MCH_PA1, pcie_rootport_aspm_quirk); 301 DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_MCH_PB, pcie_rootport_aspm_quirk); 302 DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_MCH_PB1, pcie_rootport_aspm_quirk); 303 DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_MCH_PC, pcie_rootport_aspm_quirk); 304 DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_MCH_PC1, pcie_rootport_aspm_quirk); 305 306 /* 307 * Fixup to mark boot BIOS video selected by BIOS before it changes 308 * 309 * From information provided by "Jon Smirl" <jonsmirl@gmail.com> 310 * 311 * The standard boot ROM sequence for an x86 machine uses the BIOS 312 * to select an initial video card for boot display. This boot video 313 * card will have it's BIOS copied to C0000 in system RAM. 314 * IORESOURCE_ROM_SHADOW is used to associate the boot video 315 * card with this copy. On laptops this copy has to be used since 316 * the main ROM may be compressed or combined with another image. 317 * See pci_map_rom() for use of this flag. Before marking the device 318 * with IORESOURCE_ROM_SHADOW check if a vga_default_device is already set 319 * by either arch cde or vga-arbitration, if so only apply the fixup to this 320 * already determined primary video card. 321 */ 322 323 static void pci_fixup_video(struct pci_dev *pdev) 324 { 325 struct pci_dev *bridge; 326 struct pci_bus *bus; 327 u16 config; 328 329 if (!vga_default_device()) { 330 resource_size_t start, end; 331 int i; 332 333 /* Does firmware framebuffer belong to us? */ 334 for (i = 0; i < DEVICE_COUNT_RESOURCE; i++) { 335 if (!(pci_resource_flags(pdev, i) & IORESOURCE_MEM)) 336 continue; 337 338 start = pci_resource_start(pdev, i); 339 end = pci_resource_end(pdev, i); 340 341 if (!start || !end) 342 continue; 343 344 if (screen_info.lfb_base >= start && 345 (screen_info.lfb_base + screen_info.lfb_size) < end) 346 vga_set_default_device(pdev); 347 } 348 } 349 350 /* Is VGA routed to us? */ 351 bus = pdev->bus; 352 while (bus) { 353 bridge = bus->self; 354 355 /* 356 * From information provided by 357 * "David Miller" <davem@davemloft.net> 358 * The bridge control register is valid for PCI header 359 * type BRIDGE, or CARDBUS. Host to PCI controllers use 360 * PCI header type NORMAL. 361 */ 362 if (bridge && (pci_is_bridge(bridge))) { 363 pci_read_config_word(bridge, PCI_BRIDGE_CONTROL, 364 &config); 365 if (!(config & PCI_BRIDGE_CTL_VGA)) 366 return; 367 } 368 bus = bus->parent; 369 } 370 if (!vga_default_device() || pdev == vga_default_device()) { 371 pci_read_config_word(pdev, PCI_COMMAND, &config); 372 if (config & (PCI_COMMAND_IO | PCI_COMMAND_MEMORY)) { 373 pdev->resource[PCI_ROM_RESOURCE].flags |= IORESOURCE_ROM_SHADOW; 374 dev_printk(KERN_DEBUG, &pdev->dev, "Boot video device\n"); 375 vga_set_default_device(pdev); 376 } 377 } 378 } 379 DECLARE_PCI_FIXUP_CLASS_FINAL(PCI_ANY_ID, PCI_ANY_ID, 380 PCI_CLASS_DISPLAY_VGA, 8, pci_fixup_video); 381 382 383 static const struct dmi_system_id msi_k8t_dmi_table[] = { 384 { 385 .ident = "MSI-K8T-Neo2Fir", 386 .matches = { 387 DMI_MATCH(DMI_SYS_VENDOR, "MSI"), 388 DMI_MATCH(DMI_PRODUCT_NAME, "MS-6702E"), 389 }, 390 }, 391 {} 392 }; 393 394 /* 395 * The AMD-Athlon64 board MSI "K8T Neo2-FIR" disables the onboard sound 396 * card if a PCI-soundcard is added. 397 * 398 * The BIOS only gives options "DISABLED" and "AUTO". This code sets 399 * the corresponding register-value to enable the soundcard. 400 * 401 * The soundcard is only enabled, if the mainborad is identified 402 * via DMI-tables and the soundcard is detected to be off. 403 */ 404 static void pci_fixup_msi_k8t_onboard_sound(struct pci_dev *dev) 405 { 406 unsigned char val; 407 if (!dmi_check_system(msi_k8t_dmi_table)) 408 return; /* only applies to MSI K8T Neo2-FIR */ 409 410 pci_read_config_byte(dev, 0x50, &val); 411 if (val & 0x40) { 412 pci_write_config_byte(dev, 0x50, val & (~0x40)); 413 414 /* verify the change for status output */ 415 pci_read_config_byte(dev, 0x50, &val); 416 if (val & 0x40) 417 dev_info(&dev->dev, "Detected MSI K8T Neo2-FIR; " 418 "can't enable onboard soundcard!\n"); 419 else 420 dev_info(&dev->dev, "Detected MSI K8T Neo2-FIR; " 421 "enabled onboard soundcard\n"); 422 } 423 } 424 DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_VIA, PCI_DEVICE_ID_VIA_8237, 425 pci_fixup_msi_k8t_onboard_sound); 426 DECLARE_PCI_FIXUP_RESUME(PCI_VENDOR_ID_VIA, PCI_DEVICE_ID_VIA_8237, 427 pci_fixup_msi_k8t_onboard_sound); 428 429 /* 430 * Some Toshiba laptops need extra code to enable their TI TSB43AB22/A. 431 * 432 * We pretend to bring them out of full D3 state, and restore the proper 433 * IRQ, PCI cache line size, and BARs, otherwise the device won't function 434 * properly. In some cases, the device will generate an interrupt on 435 * the wrong IRQ line, causing any devices sharing the line it's 436 * *supposed* to use to be disabled by the kernel's IRQ debug code. 437 */ 438 static u16 toshiba_line_size; 439 440 static const struct dmi_system_id toshiba_ohci1394_dmi_table[] = { 441 { 442 .ident = "Toshiba PS5 based laptop", 443 .matches = { 444 DMI_MATCH(DMI_SYS_VENDOR, "TOSHIBA"), 445 DMI_MATCH(DMI_PRODUCT_VERSION, "PS5"), 446 }, 447 }, 448 { 449 .ident = "Toshiba PSM4 based laptop", 450 .matches = { 451 DMI_MATCH(DMI_SYS_VENDOR, "TOSHIBA"), 452 DMI_MATCH(DMI_PRODUCT_VERSION, "PSM4"), 453 }, 454 }, 455 { 456 .ident = "Toshiba A40 based laptop", 457 .matches = { 458 DMI_MATCH(DMI_SYS_VENDOR, "TOSHIBA"), 459 DMI_MATCH(DMI_PRODUCT_VERSION, "PSA40U"), 460 }, 461 }, 462 { } 463 }; 464 465 static void pci_pre_fixup_toshiba_ohci1394(struct pci_dev *dev) 466 { 467 if (!dmi_check_system(toshiba_ohci1394_dmi_table)) 468 return; /* only applies to certain Toshibas (so far) */ 469 470 dev->current_state = PCI_D3cold; 471 pci_read_config_word(dev, PCI_CACHE_LINE_SIZE, &toshiba_line_size); 472 } 473 DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_TI, 0x8032, 474 pci_pre_fixup_toshiba_ohci1394); 475 476 static void pci_post_fixup_toshiba_ohci1394(struct pci_dev *dev) 477 { 478 if (!dmi_check_system(toshiba_ohci1394_dmi_table)) 479 return; /* only applies to certain Toshibas (so far) */ 480 481 /* Restore config space on Toshiba laptops */ 482 pci_write_config_word(dev, PCI_CACHE_LINE_SIZE, toshiba_line_size); 483 pci_read_config_byte(dev, PCI_INTERRUPT_LINE, (u8 *)&dev->irq); 484 pci_write_config_dword(dev, PCI_BASE_ADDRESS_0, 485 pci_resource_start(dev, 0)); 486 pci_write_config_dword(dev, PCI_BASE_ADDRESS_1, 487 pci_resource_start(dev, 1)); 488 } 489 DECLARE_PCI_FIXUP_ENABLE(PCI_VENDOR_ID_TI, 0x8032, 490 pci_post_fixup_toshiba_ohci1394); 491 492 493 /* 494 * Prevent the BIOS trapping accesses to the Cyrix CS5530A video device 495 * configuration space. 496 */ 497 static void pci_early_fixup_cyrix_5530(struct pci_dev *dev) 498 { 499 u8 r; 500 /* clear 'F4 Video Configuration Trap' bit */ 501 pci_read_config_byte(dev, 0x42, &r); 502 r &= 0xfd; 503 pci_write_config_byte(dev, 0x42, r); 504 } 505 DECLARE_PCI_FIXUP_EARLY(PCI_VENDOR_ID_CYRIX, PCI_DEVICE_ID_CYRIX_5530_LEGACY, 506 pci_early_fixup_cyrix_5530); 507 DECLARE_PCI_FIXUP_RESUME(PCI_VENDOR_ID_CYRIX, PCI_DEVICE_ID_CYRIX_5530_LEGACY, 508 pci_early_fixup_cyrix_5530); 509 510 /* 511 * Siemens Nixdorf AG FSC Multiprocessor Interrupt Controller: 512 * prevent update of the BAR0, which doesn't look like a normal BAR. 513 */ 514 static void pci_siemens_interrupt_controller(struct pci_dev *dev) 515 { 516 dev->resource[0].flags |= IORESOURCE_PCI_FIXED; 517 } 518 DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_SIEMENS, 0x0015, 519 pci_siemens_interrupt_controller); 520 521 /* 522 * SB600: Disable BAR1 on device 14.0 to avoid HPET resources from 523 * confusing the PCI engine: 524 */ 525 static void sb600_disable_hpet_bar(struct pci_dev *dev) 526 { 527 u8 val; 528 529 /* 530 * The SB600 and SB700 both share the same device 531 * ID, but the PM register 0x55 does something different 532 * for the SB700, so make sure we are dealing with the 533 * SB600 before touching the bit: 534 */ 535 536 pci_read_config_byte(dev, 0x08, &val); 537 538 if (val < 0x2F) { 539 outb(0x55, 0xCD6); 540 val = inb(0xCD7); 541 542 /* Set bit 7 in PM register 0x55 */ 543 outb(0x55, 0xCD6); 544 outb(val | 0x80, 0xCD7); 545 } 546 } 547 DECLARE_PCI_FIXUP_EARLY(PCI_VENDOR_ID_ATI, 0x4385, sb600_disable_hpet_bar); 548 549 #ifdef CONFIG_HPET_TIMER 550 static void sb600_hpet_quirk(struct pci_dev *dev) 551 { 552 struct resource *r = &dev->resource[1]; 553 554 if (r->flags & IORESOURCE_MEM && r->start == hpet_address) { 555 r->flags |= IORESOURCE_PCI_FIXED; 556 dev_info(&dev->dev, "reg 0x14 contains HPET; making it immovable\n"); 557 } 558 } 559 DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_ATI, 0x4385, sb600_hpet_quirk); 560 #endif 561 562 /* 563 * Twinhead H12Y needs us to block out a region otherwise we map devices 564 * there and any access kills the box. 565 * 566 * See: https://bugzilla.kernel.org/show_bug.cgi?id=10231 567 * 568 * Match off the LPC and svid/sdid (older kernels lose the bridge subvendor) 569 */ 570 static void twinhead_reserve_killing_zone(struct pci_dev *dev) 571 { 572 if (dev->subsystem_vendor == 0x14FF && dev->subsystem_device == 0xA003) { 573 pr_info("Reserving memory on Twinhead H12Y\n"); 574 request_mem_region(0xFFB00000, 0x100000, "twinhead"); 575 } 576 } 577 DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_INTEL, 0x27B9, twinhead_reserve_killing_zone); 578