1 /* 2 * Low-Level PCI Support for PC 3 * 4 * (c) 1999--2000 Martin Mares <mj@ucw.cz> 5 */ 6 7 #include <linux/sched.h> 8 #include <linux/pci.h> 9 #include <linux/pci-acpi.h> 10 #include <linux/ioport.h> 11 #include <linux/init.h> 12 #include <linux/dmi.h> 13 #include <linux/slab.h> 14 15 #include <asm-generic/pci-bridge.h> 16 #include <asm/acpi.h> 17 #include <asm/segment.h> 18 #include <asm/io.h> 19 #include <asm/smp.h> 20 #include <asm/pci_x86.h> 21 #include <asm/setup.h> 22 23 unsigned int pci_probe = PCI_PROBE_BIOS | PCI_PROBE_CONF1 | PCI_PROBE_CONF2 | 24 PCI_PROBE_MMCONF; 25 26 unsigned int pci_early_dump_regs; 27 static int pci_bf_sort; 28 static int smbios_type_b1_flag; 29 int pci_routeirq; 30 int noioapicquirk; 31 #ifdef CONFIG_X86_REROUTE_FOR_BROKEN_BOOT_IRQS 32 int noioapicreroute = 0; 33 #else 34 int noioapicreroute = 1; 35 #endif 36 int pcibios_last_bus = -1; 37 unsigned long pirq_table_addr; 38 const struct pci_raw_ops *__read_mostly raw_pci_ops; 39 const struct pci_raw_ops *__read_mostly raw_pci_ext_ops; 40 41 int raw_pci_read(unsigned int domain, unsigned int bus, unsigned int devfn, 42 int reg, int len, u32 *val) 43 { 44 if (domain == 0 && reg < 256 && raw_pci_ops) 45 return raw_pci_ops->read(domain, bus, devfn, reg, len, val); 46 if (raw_pci_ext_ops) 47 return raw_pci_ext_ops->read(domain, bus, devfn, reg, len, val); 48 return -EINVAL; 49 } 50 51 int raw_pci_write(unsigned int domain, unsigned int bus, unsigned int devfn, 52 int reg, int len, u32 val) 53 { 54 if (domain == 0 && reg < 256 && raw_pci_ops) 55 return raw_pci_ops->write(domain, bus, devfn, reg, len, val); 56 if (raw_pci_ext_ops) 57 return raw_pci_ext_ops->write(domain, bus, devfn, reg, len, val); 58 return -EINVAL; 59 } 60 61 static int pci_read(struct pci_bus *bus, unsigned int devfn, int where, int size, u32 *value) 62 { 63 return raw_pci_read(pci_domain_nr(bus), bus->number, 64 devfn, where, size, value); 65 } 66 67 static int pci_write(struct pci_bus *bus, unsigned int devfn, int where, int size, u32 value) 68 { 69 return raw_pci_write(pci_domain_nr(bus), bus->number, 70 devfn, where, size, value); 71 } 72 73 struct pci_ops pci_root_ops = { 74 .read = pci_read, 75 .write = pci_write, 76 }; 77 78 /* 79 * This interrupt-safe spinlock protects all accesses to PCI 80 * configuration space. 81 */ 82 DEFINE_RAW_SPINLOCK(pci_config_lock); 83 84 static int can_skip_ioresource_align(const struct dmi_system_id *d) 85 { 86 pci_probe |= PCI_CAN_SKIP_ISA_ALIGN; 87 printk(KERN_INFO "PCI: %s detected, can skip ISA alignment\n", d->ident); 88 return 0; 89 } 90 91 static const struct dmi_system_id can_skip_pciprobe_dmi_table[] = { 92 /* 93 * Systems where PCI IO resource ISA alignment can be skipped 94 * when the ISA enable bit in the bridge control is not set 95 */ 96 { 97 .callback = can_skip_ioresource_align, 98 .ident = "IBM System x3800", 99 .matches = { 100 DMI_MATCH(DMI_SYS_VENDOR, "IBM"), 101 DMI_MATCH(DMI_PRODUCT_NAME, "x3800"), 102 }, 103 }, 104 { 105 .callback = can_skip_ioresource_align, 106 .ident = "IBM System x3850", 107 .matches = { 108 DMI_MATCH(DMI_SYS_VENDOR, "IBM"), 109 DMI_MATCH(DMI_PRODUCT_NAME, "x3850"), 110 }, 111 }, 112 { 113 .callback = can_skip_ioresource_align, 114 .ident = "IBM System x3950", 115 .matches = { 116 DMI_MATCH(DMI_SYS_VENDOR, "IBM"), 117 DMI_MATCH(DMI_PRODUCT_NAME, "x3950"), 118 }, 119 }, 120 {} 121 }; 122 123 void __init dmi_check_skip_isa_align(void) 124 { 125 dmi_check_system(can_skip_pciprobe_dmi_table); 126 } 127 128 static void pcibios_fixup_device_resources(struct pci_dev *dev) 129 { 130 struct resource *rom_r = &dev->resource[PCI_ROM_RESOURCE]; 131 struct resource *bar_r; 132 int bar; 133 134 if (pci_probe & PCI_NOASSIGN_BARS) { 135 /* 136 * If the BIOS did not assign the BAR, zero out the 137 * resource so the kernel doesn't attmept to assign 138 * it later on in pci_assign_unassigned_resources 139 */ 140 for (bar = 0; bar <= PCI_STD_RESOURCE_END; bar++) { 141 bar_r = &dev->resource[bar]; 142 if (bar_r->start == 0 && bar_r->end != 0) { 143 bar_r->flags = 0; 144 bar_r->end = 0; 145 } 146 } 147 } 148 149 if (pci_probe & PCI_NOASSIGN_ROMS) { 150 if (rom_r->parent) 151 return; 152 if (rom_r->start) { 153 /* we deal with BIOS assigned ROM later */ 154 return; 155 } 156 rom_r->start = rom_r->end = rom_r->flags = 0; 157 } 158 } 159 160 /* 161 * Called after each bus is probed, but before its children 162 * are examined. 163 */ 164 165 void pcibios_fixup_bus(struct pci_bus *b) 166 { 167 struct pci_dev *dev; 168 169 pci_read_bridge_bases(b); 170 list_for_each_entry(dev, &b->devices, bus_list) 171 pcibios_fixup_device_resources(dev); 172 } 173 174 void pcibios_add_bus(struct pci_bus *bus) 175 { 176 acpi_pci_add_bus(bus); 177 } 178 179 void pcibios_remove_bus(struct pci_bus *bus) 180 { 181 acpi_pci_remove_bus(bus); 182 } 183 184 /* 185 * Only use DMI information to set this if nothing was passed 186 * on the kernel command line (which was parsed earlier). 187 */ 188 189 static int set_bf_sort(const struct dmi_system_id *d) 190 { 191 if (pci_bf_sort == pci_bf_sort_default) { 192 pci_bf_sort = pci_dmi_bf; 193 printk(KERN_INFO "PCI: %s detected, enabling pci=bfsort.\n", d->ident); 194 } 195 return 0; 196 } 197 198 static void read_dmi_type_b1(const struct dmi_header *dm, 199 void *private_data) 200 { 201 u8 *d = (u8 *)dm + 4; 202 203 if (dm->type != 0xB1) 204 return; 205 switch (((*(u32 *)d) >> 9) & 0x03) { 206 case 0x00: 207 printk(KERN_INFO "dmi type 0xB1 record - unknown flag\n"); 208 break; 209 case 0x01: /* set pci=bfsort */ 210 smbios_type_b1_flag = 1; 211 break; 212 case 0x02: /* do not set pci=bfsort */ 213 smbios_type_b1_flag = 2; 214 break; 215 default: 216 break; 217 } 218 } 219 220 static int find_sort_method(const struct dmi_system_id *d) 221 { 222 dmi_walk(read_dmi_type_b1, NULL); 223 224 if (smbios_type_b1_flag == 1) { 225 set_bf_sort(d); 226 return 0; 227 } 228 return -1; 229 } 230 231 /* 232 * Enable renumbering of PCI bus# ranges to reach all PCI busses (Cardbus) 233 */ 234 #ifdef __i386__ 235 static int assign_all_busses(const struct dmi_system_id *d) 236 { 237 pci_probe |= PCI_ASSIGN_ALL_BUSSES; 238 printk(KERN_INFO "%s detected: enabling PCI bus# renumbering" 239 " (pci=assign-busses)\n", d->ident); 240 return 0; 241 } 242 #endif 243 244 static int set_scan_all(const struct dmi_system_id *d) 245 { 246 printk(KERN_INFO "PCI: %s detected, enabling pci=pcie_scan_all\n", 247 d->ident); 248 pci_add_flags(PCI_SCAN_ALL_PCIE_DEVS); 249 return 0; 250 } 251 252 static const struct dmi_system_id pciprobe_dmi_table[] = { 253 #ifdef __i386__ 254 /* 255 * Laptops which need pci=assign-busses to see Cardbus cards 256 */ 257 { 258 .callback = assign_all_busses, 259 .ident = "Samsung X20 Laptop", 260 .matches = { 261 DMI_MATCH(DMI_SYS_VENDOR, "Samsung Electronics"), 262 DMI_MATCH(DMI_PRODUCT_NAME, "SX20S"), 263 }, 264 }, 265 #endif /* __i386__ */ 266 { 267 .callback = set_bf_sort, 268 .ident = "Dell PowerEdge 1950", 269 .matches = { 270 DMI_MATCH(DMI_SYS_VENDOR, "Dell"), 271 DMI_MATCH(DMI_PRODUCT_NAME, "PowerEdge 1950"), 272 }, 273 }, 274 { 275 .callback = set_bf_sort, 276 .ident = "Dell PowerEdge 1955", 277 .matches = { 278 DMI_MATCH(DMI_SYS_VENDOR, "Dell"), 279 DMI_MATCH(DMI_PRODUCT_NAME, "PowerEdge 1955"), 280 }, 281 }, 282 { 283 .callback = set_bf_sort, 284 .ident = "Dell PowerEdge 2900", 285 .matches = { 286 DMI_MATCH(DMI_SYS_VENDOR, "Dell"), 287 DMI_MATCH(DMI_PRODUCT_NAME, "PowerEdge 2900"), 288 }, 289 }, 290 { 291 .callback = set_bf_sort, 292 .ident = "Dell PowerEdge 2950", 293 .matches = { 294 DMI_MATCH(DMI_SYS_VENDOR, "Dell"), 295 DMI_MATCH(DMI_PRODUCT_NAME, "PowerEdge 2950"), 296 }, 297 }, 298 { 299 .callback = set_bf_sort, 300 .ident = "Dell PowerEdge R900", 301 .matches = { 302 DMI_MATCH(DMI_SYS_VENDOR, "Dell"), 303 DMI_MATCH(DMI_PRODUCT_NAME, "PowerEdge R900"), 304 }, 305 }, 306 { 307 .callback = find_sort_method, 308 .ident = "Dell System", 309 .matches = { 310 DMI_MATCH(DMI_SYS_VENDOR, "Dell Inc"), 311 }, 312 }, 313 { 314 .callback = set_bf_sort, 315 .ident = "HP ProLiant BL20p G3", 316 .matches = { 317 DMI_MATCH(DMI_SYS_VENDOR, "HP"), 318 DMI_MATCH(DMI_PRODUCT_NAME, "ProLiant BL20p G3"), 319 }, 320 }, 321 { 322 .callback = set_bf_sort, 323 .ident = "HP ProLiant BL20p G4", 324 .matches = { 325 DMI_MATCH(DMI_SYS_VENDOR, "HP"), 326 DMI_MATCH(DMI_PRODUCT_NAME, "ProLiant BL20p G4"), 327 }, 328 }, 329 { 330 .callback = set_bf_sort, 331 .ident = "HP ProLiant BL30p G1", 332 .matches = { 333 DMI_MATCH(DMI_SYS_VENDOR, "HP"), 334 DMI_MATCH(DMI_PRODUCT_NAME, "ProLiant BL30p G1"), 335 }, 336 }, 337 { 338 .callback = set_bf_sort, 339 .ident = "HP ProLiant BL25p G1", 340 .matches = { 341 DMI_MATCH(DMI_SYS_VENDOR, "HP"), 342 DMI_MATCH(DMI_PRODUCT_NAME, "ProLiant BL25p G1"), 343 }, 344 }, 345 { 346 .callback = set_bf_sort, 347 .ident = "HP ProLiant BL35p G1", 348 .matches = { 349 DMI_MATCH(DMI_SYS_VENDOR, "HP"), 350 DMI_MATCH(DMI_PRODUCT_NAME, "ProLiant BL35p G1"), 351 }, 352 }, 353 { 354 .callback = set_bf_sort, 355 .ident = "HP ProLiant BL45p G1", 356 .matches = { 357 DMI_MATCH(DMI_SYS_VENDOR, "HP"), 358 DMI_MATCH(DMI_PRODUCT_NAME, "ProLiant BL45p G1"), 359 }, 360 }, 361 { 362 .callback = set_bf_sort, 363 .ident = "HP ProLiant BL45p G2", 364 .matches = { 365 DMI_MATCH(DMI_SYS_VENDOR, "HP"), 366 DMI_MATCH(DMI_PRODUCT_NAME, "ProLiant BL45p G2"), 367 }, 368 }, 369 { 370 .callback = set_bf_sort, 371 .ident = "HP ProLiant BL460c G1", 372 .matches = { 373 DMI_MATCH(DMI_SYS_VENDOR, "HP"), 374 DMI_MATCH(DMI_PRODUCT_NAME, "ProLiant BL460c G1"), 375 }, 376 }, 377 { 378 .callback = set_bf_sort, 379 .ident = "HP ProLiant BL465c G1", 380 .matches = { 381 DMI_MATCH(DMI_SYS_VENDOR, "HP"), 382 DMI_MATCH(DMI_PRODUCT_NAME, "ProLiant BL465c G1"), 383 }, 384 }, 385 { 386 .callback = set_bf_sort, 387 .ident = "HP ProLiant BL480c G1", 388 .matches = { 389 DMI_MATCH(DMI_SYS_VENDOR, "HP"), 390 DMI_MATCH(DMI_PRODUCT_NAME, "ProLiant BL480c G1"), 391 }, 392 }, 393 { 394 .callback = set_bf_sort, 395 .ident = "HP ProLiant BL685c G1", 396 .matches = { 397 DMI_MATCH(DMI_SYS_VENDOR, "HP"), 398 DMI_MATCH(DMI_PRODUCT_NAME, "ProLiant BL685c G1"), 399 }, 400 }, 401 { 402 .callback = set_bf_sort, 403 .ident = "HP ProLiant DL360", 404 .matches = { 405 DMI_MATCH(DMI_SYS_VENDOR, "HP"), 406 DMI_MATCH(DMI_PRODUCT_NAME, "ProLiant DL360"), 407 }, 408 }, 409 { 410 .callback = set_bf_sort, 411 .ident = "HP ProLiant DL380", 412 .matches = { 413 DMI_MATCH(DMI_SYS_VENDOR, "HP"), 414 DMI_MATCH(DMI_PRODUCT_NAME, "ProLiant DL380"), 415 }, 416 }, 417 #ifdef __i386__ 418 { 419 .callback = assign_all_busses, 420 .ident = "Compaq EVO N800c", 421 .matches = { 422 DMI_MATCH(DMI_SYS_VENDOR, "Compaq"), 423 DMI_MATCH(DMI_PRODUCT_NAME, "EVO N800c"), 424 }, 425 }, 426 #endif 427 { 428 .callback = set_bf_sort, 429 .ident = "HP ProLiant DL385 G2", 430 .matches = { 431 DMI_MATCH(DMI_SYS_VENDOR, "HP"), 432 DMI_MATCH(DMI_PRODUCT_NAME, "ProLiant DL385 G2"), 433 }, 434 }, 435 { 436 .callback = set_bf_sort, 437 .ident = "HP ProLiant DL585 G2", 438 .matches = { 439 DMI_MATCH(DMI_SYS_VENDOR, "HP"), 440 DMI_MATCH(DMI_PRODUCT_NAME, "ProLiant DL585 G2"), 441 }, 442 }, 443 { 444 .callback = set_scan_all, 445 .ident = "Stratus/NEC ftServer", 446 .matches = { 447 DMI_MATCH(DMI_SYS_VENDOR, "Stratus"), 448 DMI_MATCH(DMI_PRODUCT_NAME, "ftServer"), 449 }, 450 }, 451 {} 452 }; 453 454 void __init dmi_check_pciprobe(void) 455 { 456 dmi_check_system(pciprobe_dmi_table); 457 } 458 459 void pcibios_scan_root(int busnum) 460 { 461 struct pci_bus *bus; 462 struct pci_sysdata *sd; 463 LIST_HEAD(resources); 464 465 sd = kzalloc(sizeof(*sd), GFP_KERNEL); 466 if (!sd) { 467 printk(KERN_ERR "PCI: OOM, skipping PCI bus %02x\n", busnum); 468 return; 469 } 470 sd->node = x86_pci_root_bus_node(busnum); 471 x86_pci_root_bus_resources(busnum, &resources); 472 printk(KERN_DEBUG "PCI: Probing PCI hardware (bus %02x)\n", busnum); 473 bus = pci_scan_root_bus(NULL, busnum, &pci_root_ops, sd, &resources); 474 if (!bus) { 475 pci_free_resource_list(&resources); 476 kfree(sd); 477 } 478 } 479 480 void __init pcibios_set_cache_line_size(void) 481 { 482 struct cpuinfo_x86 *c = &boot_cpu_data; 483 484 /* 485 * Set PCI cacheline size to that of the CPU if the CPU has reported it. 486 * (For older CPUs that don't support cpuid, we se it to 32 bytes 487 * It's also good for 386/486s (which actually have 16) 488 * as quite a few PCI devices do not support smaller values. 489 */ 490 if (c->x86_clflush_size > 0) { 491 pci_dfl_cache_line_size = c->x86_clflush_size >> 2; 492 printk(KERN_DEBUG "PCI: pci_cache_line_size set to %d bytes\n", 493 pci_dfl_cache_line_size << 2); 494 } else { 495 pci_dfl_cache_line_size = 32 >> 2; 496 printk(KERN_DEBUG "PCI: Unknown cacheline size. Setting to 32 bytes\n"); 497 } 498 } 499 500 int __init pcibios_init(void) 501 { 502 if (!raw_pci_ops) { 503 printk(KERN_WARNING "PCI: System does not support PCI\n"); 504 return 0; 505 } 506 507 pcibios_set_cache_line_size(); 508 pcibios_resource_survey(); 509 510 if (pci_bf_sort >= pci_force_bf) 511 pci_sort_breadthfirst(); 512 return 0; 513 } 514 515 char * __init pcibios_setup(char *str) 516 { 517 if (!strcmp(str, "off")) { 518 pci_probe = 0; 519 return NULL; 520 } else if (!strcmp(str, "bfsort")) { 521 pci_bf_sort = pci_force_bf; 522 return NULL; 523 } else if (!strcmp(str, "nobfsort")) { 524 pci_bf_sort = pci_force_nobf; 525 return NULL; 526 } 527 #ifdef CONFIG_PCI_BIOS 528 else if (!strcmp(str, "bios")) { 529 pci_probe = PCI_PROBE_BIOS; 530 return NULL; 531 } else if (!strcmp(str, "nobios")) { 532 pci_probe &= ~PCI_PROBE_BIOS; 533 return NULL; 534 } else if (!strcmp(str, "biosirq")) { 535 pci_probe |= PCI_BIOS_IRQ_SCAN; 536 return NULL; 537 } else if (!strncmp(str, "pirqaddr=", 9)) { 538 pirq_table_addr = simple_strtoul(str+9, NULL, 0); 539 return NULL; 540 } 541 #endif 542 #ifdef CONFIG_PCI_DIRECT 543 else if (!strcmp(str, "conf1")) { 544 pci_probe = PCI_PROBE_CONF1 | PCI_NO_CHECKS; 545 return NULL; 546 } 547 else if (!strcmp(str, "conf2")) { 548 pci_probe = PCI_PROBE_CONF2 | PCI_NO_CHECKS; 549 return NULL; 550 } 551 #endif 552 #ifdef CONFIG_PCI_MMCONFIG 553 else if (!strcmp(str, "nommconf")) { 554 pci_probe &= ~PCI_PROBE_MMCONF; 555 return NULL; 556 } 557 else if (!strcmp(str, "check_enable_amd_mmconf")) { 558 pci_probe |= PCI_CHECK_ENABLE_AMD_MMCONF; 559 return NULL; 560 } 561 #endif 562 else if (!strcmp(str, "noacpi")) { 563 acpi_noirq_set(); 564 return NULL; 565 } 566 else if (!strcmp(str, "noearly")) { 567 pci_probe |= PCI_PROBE_NOEARLY; 568 return NULL; 569 } 570 else if (!strcmp(str, "usepirqmask")) { 571 pci_probe |= PCI_USE_PIRQ_MASK; 572 return NULL; 573 } else if (!strncmp(str, "irqmask=", 8)) { 574 pcibios_irq_mask = simple_strtol(str+8, NULL, 0); 575 return NULL; 576 } else if (!strncmp(str, "lastbus=", 8)) { 577 pcibios_last_bus = simple_strtol(str+8, NULL, 0); 578 return NULL; 579 } else if (!strcmp(str, "rom")) { 580 pci_probe |= PCI_ASSIGN_ROMS; 581 return NULL; 582 } else if (!strcmp(str, "norom")) { 583 pci_probe |= PCI_NOASSIGN_ROMS; 584 return NULL; 585 } else if (!strcmp(str, "nobar")) { 586 pci_probe |= PCI_NOASSIGN_BARS; 587 return NULL; 588 } else if (!strcmp(str, "assign-busses")) { 589 pci_probe |= PCI_ASSIGN_ALL_BUSSES; 590 return NULL; 591 } else if (!strcmp(str, "use_crs")) { 592 pci_probe |= PCI_USE__CRS; 593 return NULL; 594 } else if (!strcmp(str, "nocrs")) { 595 pci_probe |= PCI_ROOT_NO_CRS; 596 return NULL; 597 } else if (!strcmp(str, "earlydump")) { 598 pci_early_dump_regs = 1; 599 return NULL; 600 } else if (!strcmp(str, "routeirq")) { 601 pci_routeirq = 1; 602 return NULL; 603 } else if (!strcmp(str, "skip_isa_align")) { 604 pci_probe |= PCI_CAN_SKIP_ISA_ALIGN; 605 return NULL; 606 } else if (!strcmp(str, "noioapicquirk")) { 607 noioapicquirk = 1; 608 return NULL; 609 } else if (!strcmp(str, "ioapicreroute")) { 610 if (noioapicreroute != -1) 611 noioapicreroute = 0; 612 return NULL; 613 } else if (!strcmp(str, "noioapicreroute")) { 614 if (noioapicreroute != -1) 615 noioapicreroute = 1; 616 return NULL; 617 } 618 return str; 619 } 620 621 unsigned int pcibios_assign_all_busses(void) 622 { 623 return (pci_probe & PCI_ASSIGN_ALL_BUSSES) ? 1 : 0; 624 } 625 626 int pcibios_add_device(struct pci_dev *dev) 627 { 628 struct setup_data *data; 629 struct pci_setup_rom *rom; 630 u64 pa_data; 631 632 pa_data = boot_params.hdr.setup_data; 633 while (pa_data) { 634 data = ioremap(pa_data, sizeof(*rom)); 635 if (!data) 636 return -ENOMEM; 637 638 if (data->type == SETUP_PCI) { 639 rom = (struct pci_setup_rom *)data; 640 641 if ((pci_domain_nr(dev->bus) == rom->segment) && 642 (dev->bus->number == rom->bus) && 643 (PCI_SLOT(dev->devfn) == rom->device) && 644 (PCI_FUNC(dev->devfn) == rom->function) && 645 (dev->vendor == rom->vendor) && 646 (dev->device == rom->devid)) { 647 dev->rom = pa_data + 648 offsetof(struct pci_setup_rom, romdata); 649 dev->romlen = rom->pcilen; 650 } 651 } 652 pa_data = data->next; 653 iounmap(data); 654 } 655 return 0; 656 } 657 658 int pcibios_enable_device(struct pci_dev *dev, int mask) 659 { 660 int err; 661 662 if ((err = pci_enable_resources(dev, mask)) < 0) 663 return err; 664 665 if (!pci_dev_msi_enabled(dev)) 666 return pcibios_enable_irq(dev); 667 return 0; 668 } 669 670 void pcibios_disable_device (struct pci_dev *dev) 671 { 672 if (!pci_dev_msi_enabled(dev) && pcibios_disable_irq) 673 pcibios_disable_irq(dev); 674 } 675 676 int pci_ext_cfg_avail(void) 677 { 678 if (raw_pci_ext_ops) 679 return 1; 680 else 681 return 0; 682 } 683