xref: /openbmc/linux/arch/x86/lib/delay.c (revision cb1aaebe)
1 // SPDX-License-Identifier: GPL-2.0
2 /*
3  *	Precise Delay Loops for i386
4  *
5  *	Copyright (C) 1993 Linus Torvalds
6  *	Copyright (C) 1997 Martin Mares <mj@atrey.karlin.mff.cuni.cz>
7  *	Copyright (C) 2008 Jiri Hladky <hladky _dot_ jiri _at_ gmail _dot_ com>
8  *
9  *	The __delay function must _NOT_ be inlined as its execution time
10  *	depends wildly on alignment on many x86 processors. The additional
11  *	jump magic is needed to get the timing stable on all the CPU's
12  *	we have to worry about.
13  */
14 
15 #include <linux/export.h>
16 #include <linux/sched.h>
17 #include <linux/timex.h>
18 #include <linux/preempt.h>
19 #include <linux/delay.h>
20 
21 #include <asm/processor.h>
22 #include <asm/delay.h>
23 #include <asm/timer.h>
24 #include <asm/mwait.h>
25 
26 #ifdef CONFIG_SMP
27 # include <asm/smp.h>
28 #endif
29 
30 /* simple loop based delay: */
31 static void delay_loop(unsigned long loops)
32 {
33 	asm volatile(
34 		"	test %0,%0	\n"
35 		"	jz 3f		\n"
36 		"	jmp 1f		\n"
37 
38 		".align 16		\n"
39 		"1:	jmp 2f		\n"
40 
41 		".align 16		\n"
42 		"2:	dec %0		\n"
43 		"	jnz 2b		\n"
44 		"3:	dec %0		\n"
45 
46 		: /* we don't need output */
47 		:"a" (loops)
48 	);
49 }
50 
51 /* TSC based delay: */
52 static void delay_tsc(unsigned long __loops)
53 {
54 	u64 bclock, now, loops = __loops;
55 	int cpu;
56 
57 	preempt_disable();
58 	cpu = smp_processor_id();
59 	bclock = rdtsc_ordered();
60 	for (;;) {
61 		now = rdtsc_ordered();
62 		if ((now - bclock) >= loops)
63 			break;
64 
65 		/* Allow RT tasks to run */
66 		preempt_enable();
67 		rep_nop();
68 		preempt_disable();
69 
70 		/*
71 		 * It is possible that we moved to another CPU, and
72 		 * since TSC's are per-cpu we need to calculate
73 		 * that. The delay must guarantee that we wait "at
74 		 * least" the amount of time. Being moved to another
75 		 * CPU could make the wait longer but we just need to
76 		 * make sure we waited long enough. Rebalance the
77 		 * counter for this CPU.
78 		 */
79 		if (unlikely(cpu != smp_processor_id())) {
80 			loops -= (now - bclock);
81 			cpu = smp_processor_id();
82 			bclock = rdtsc_ordered();
83 		}
84 	}
85 	preempt_enable();
86 }
87 
88 /*
89  * On some AMD platforms, MWAITX has a configurable 32-bit timer, that
90  * counts with TSC frequency. The input value is the loop of the
91  * counter, it will exit when the timer expires.
92  */
93 static void delay_mwaitx(unsigned long __loops)
94 {
95 	u64 start, end, delay, loops = __loops;
96 
97 	/*
98 	 * Timer value of 0 causes MWAITX to wait indefinitely, unless there
99 	 * is a store on the memory monitored by MONITORX.
100 	 */
101 	if (loops == 0)
102 		return;
103 
104 	start = rdtsc_ordered();
105 
106 	for (;;) {
107 		delay = min_t(u64, MWAITX_MAX_LOOPS, loops);
108 
109 		/*
110 		 * Use cpu_tss_rw as a cacheline-aligned, seldomly
111 		 * accessed per-cpu variable as the monitor target.
112 		 */
113 		__monitorx(raw_cpu_ptr(&cpu_tss_rw), 0, 0);
114 
115 		/*
116 		 * AMD, like Intel, supports the EAX hint and EAX=0xf
117 		 * means, do not enter any deep C-state and we use it
118 		 * here in delay() to minimize wakeup latency.
119 		 */
120 		__mwaitx(MWAITX_DISABLE_CSTATES, delay, MWAITX_ECX_TIMER_ENABLE);
121 
122 		end = rdtsc_ordered();
123 
124 		if (loops <= end - start)
125 			break;
126 
127 		loops -= end - start;
128 
129 		start = end;
130 	}
131 }
132 
133 /*
134  * Since we calibrate only once at boot, this
135  * function should be set once at boot and not changed
136  */
137 static void (*delay_fn)(unsigned long) = delay_loop;
138 
139 void use_tsc_delay(void)
140 {
141 	if (delay_fn == delay_loop)
142 		delay_fn = delay_tsc;
143 }
144 
145 void use_mwaitx_delay(void)
146 {
147 	delay_fn = delay_mwaitx;
148 }
149 
150 int read_current_timer(unsigned long *timer_val)
151 {
152 	if (delay_fn == delay_tsc) {
153 		*timer_val = rdtsc();
154 		return 0;
155 	}
156 	return -1;
157 }
158 
159 void __delay(unsigned long loops)
160 {
161 	delay_fn(loops);
162 }
163 EXPORT_SYMBOL(__delay);
164 
165 noinline void __const_udelay(unsigned long xloops)
166 {
167 	unsigned long lpj = this_cpu_read(cpu_info.loops_per_jiffy) ? : loops_per_jiffy;
168 	int d0;
169 
170 	xloops *= 4;
171 	asm("mull %%edx"
172 		:"=d" (xloops), "=&a" (d0)
173 		:"1" (xloops), "0" (lpj * (HZ / 4)));
174 
175 	__delay(++xloops);
176 }
177 EXPORT_SYMBOL(__const_udelay);
178 
179 void __udelay(unsigned long usecs)
180 {
181 	__const_udelay(usecs * 0x000010c7); /* 2**32 / 1000000 (rounded up) */
182 }
183 EXPORT_SYMBOL(__udelay);
184 
185 void __ndelay(unsigned long nsecs)
186 {
187 	__const_udelay(nsecs * 0x00005); /* 2**32 / 1000000000 (rounded up) */
188 }
189 EXPORT_SYMBOL(__ndelay);
190