xref: /openbmc/linux/arch/x86/kvm/vmx/posted_intr.c (revision a5d46d9a)
1 // SPDX-License-Identifier: GPL-2.0-only
2 #include <linux/kvm_host.h>
3 
4 #include <asm/irq_remapping.h>
5 #include <asm/cpu.h>
6 
7 #include "lapic.h"
8 #include "posted_intr.h"
9 #include "trace.h"
10 #include "vmx.h"
11 
12 /*
13  * We maintain a per-CPU linked-list of vCPU, so in wakeup_handler() we
14  * can find which vCPU should be waken up.
15  */
16 static DEFINE_PER_CPU(struct list_head, blocked_vcpu_on_cpu);
17 static DEFINE_PER_CPU(spinlock_t, blocked_vcpu_on_cpu_lock);
18 
19 static inline struct pi_desc *vcpu_to_pi_desc(struct kvm_vcpu *vcpu)
20 {
21 	return &(to_vmx(vcpu)->pi_desc);
22 }
23 
24 void vmx_vcpu_pi_load(struct kvm_vcpu *vcpu, int cpu)
25 {
26 	struct pi_desc *pi_desc = vcpu_to_pi_desc(vcpu);
27 	struct pi_desc old, new;
28 	unsigned int dest;
29 
30 	/*
31 	 * In case of hot-plug or hot-unplug, we may have to undo
32 	 * vmx_vcpu_pi_put even if there is no assigned device.  And we
33 	 * always keep PI.NDST up to date for simplicity: it makes the
34 	 * code easier, and CPU migration is not a fast path.
35 	 */
36 	if (!pi_test_sn(pi_desc) && vcpu->cpu == cpu)
37 		return;
38 
39 	/*
40 	 * If the 'nv' field is POSTED_INTR_WAKEUP_VECTOR, do not change
41 	 * PI.NDST: pi_post_block is the one expected to change PID.NDST and the
42 	 * wakeup handler expects the vCPU to be on the blocked_vcpu_list that
43 	 * matches PI.NDST. Otherwise, a vcpu may not be able to be woken up
44 	 * correctly.
45 	 */
46 	if (pi_desc->nv == POSTED_INTR_WAKEUP_VECTOR || vcpu->cpu == cpu) {
47 		pi_clear_sn(pi_desc);
48 		goto after_clear_sn;
49 	}
50 
51 	/* The full case.  */
52 	do {
53 		old.control = new.control = pi_desc->control;
54 
55 		dest = cpu_physical_id(cpu);
56 
57 		if (x2apic_mode)
58 			new.ndst = dest;
59 		else
60 			new.ndst = (dest << 8) & 0xFF00;
61 
62 		new.sn = 0;
63 	} while (cmpxchg64(&pi_desc->control, old.control,
64 			   new.control) != old.control);
65 
66 after_clear_sn:
67 
68 	/*
69 	 * Clear SN before reading the bitmap.  The VT-d firmware
70 	 * writes the bitmap and reads SN atomically (5.2.3 in the
71 	 * spec), so it doesn't really have a memory barrier that
72 	 * pairs with this, but we cannot do that and we need one.
73 	 */
74 	smp_mb__after_atomic();
75 
76 	if (!pi_is_pir_empty(pi_desc))
77 		pi_set_on(pi_desc);
78 }
79 
80 void vmx_vcpu_pi_put(struct kvm_vcpu *vcpu)
81 {
82 	struct pi_desc *pi_desc = vcpu_to_pi_desc(vcpu);
83 
84 	if (!kvm_arch_has_assigned_device(vcpu->kvm) ||
85 		!irq_remapping_cap(IRQ_POSTING_CAP)  ||
86 		!kvm_vcpu_apicv_active(vcpu))
87 		return;
88 
89 	/* Set SN when the vCPU is preempted */
90 	if (vcpu->preempted)
91 		pi_set_sn(pi_desc);
92 }
93 
94 static void __pi_post_block(struct kvm_vcpu *vcpu)
95 {
96 	struct pi_desc *pi_desc = vcpu_to_pi_desc(vcpu);
97 	struct pi_desc old, new;
98 	unsigned int dest;
99 
100 	do {
101 		old.control = new.control = pi_desc->control;
102 		WARN(old.nv != POSTED_INTR_WAKEUP_VECTOR,
103 		     "Wakeup handler not enabled while the VCPU is blocked\n");
104 
105 		dest = cpu_physical_id(vcpu->cpu);
106 
107 		if (x2apic_mode)
108 			new.ndst = dest;
109 		else
110 			new.ndst = (dest << 8) & 0xFF00;
111 
112 		/* set 'NV' to 'notification vector' */
113 		new.nv = POSTED_INTR_VECTOR;
114 	} while (cmpxchg64(&pi_desc->control, old.control,
115 			   new.control) != old.control);
116 
117 	if (!WARN_ON_ONCE(vcpu->pre_pcpu == -1)) {
118 		spin_lock(&per_cpu(blocked_vcpu_on_cpu_lock, vcpu->pre_pcpu));
119 		list_del(&vcpu->blocked_vcpu_list);
120 		spin_unlock(&per_cpu(blocked_vcpu_on_cpu_lock, vcpu->pre_pcpu));
121 		vcpu->pre_pcpu = -1;
122 	}
123 }
124 
125 /*
126  * This routine does the following things for vCPU which is going
127  * to be blocked if VT-d PI is enabled.
128  * - Store the vCPU to the wakeup list, so when interrupts happen
129  *   we can find the right vCPU to wake up.
130  * - Change the Posted-interrupt descriptor as below:
131  *      'NDST' <-- vcpu->pre_pcpu
132  *      'NV' <-- POSTED_INTR_WAKEUP_VECTOR
133  * - If 'ON' is set during this process, which means at least one
134  *   interrupt is posted for this vCPU, we cannot block it, in
135  *   this case, return 1, otherwise, return 0.
136  *
137  */
138 int pi_pre_block(struct kvm_vcpu *vcpu)
139 {
140 	unsigned int dest;
141 	struct pi_desc old, new;
142 	struct pi_desc *pi_desc = vcpu_to_pi_desc(vcpu);
143 
144 	if (!kvm_arch_has_assigned_device(vcpu->kvm) ||
145 		!irq_remapping_cap(IRQ_POSTING_CAP)  ||
146 		!kvm_vcpu_apicv_active(vcpu))
147 		return 0;
148 
149 	WARN_ON(irqs_disabled());
150 	local_irq_disable();
151 	if (!WARN_ON_ONCE(vcpu->pre_pcpu != -1)) {
152 		vcpu->pre_pcpu = vcpu->cpu;
153 		spin_lock(&per_cpu(blocked_vcpu_on_cpu_lock, vcpu->pre_pcpu));
154 		list_add_tail(&vcpu->blocked_vcpu_list,
155 			      &per_cpu(blocked_vcpu_on_cpu,
156 				       vcpu->pre_pcpu));
157 		spin_unlock(&per_cpu(blocked_vcpu_on_cpu_lock, vcpu->pre_pcpu));
158 	}
159 
160 	do {
161 		old.control = new.control = pi_desc->control;
162 
163 		WARN((pi_desc->sn == 1),
164 		     "Warning: SN field of posted-interrupts "
165 		     "is set before blocking\n");
166 
167 		/*
168 		 * Since vCPU can be preempted during this process,
169 		 * vcpu->cpu could be different with pre_pcpu, we
170 		 * need to set pre_pcpu as the destination of wakeup
171 		 * notification event, then we can find the right vCPU
172 		 * to wakeup in wakeup handler if interrupts happen
173 		 * when the vCPU is in blocked state.
174 		 */
175 		dest = cpu_physical_id(vcpu->pre_pcpu);
176 
177 		if (x2apic_mode)
178 			new.ndst = dest;
179 		else
180 			new.ndst = (dest << 8) & 0xFF00;
181 
182 		/* set 'NV' to 'wakeup vector' */
183 		new.nv = POSTED_INTR_WAKEUP_VECTOR;
184 	} while (cmpxchg64(&pi_desc->control, old.control,
185 			   new.control) != old.control);
186 
187 	/* We should not block the vCPU if an interrupt is posted for it.  */
188 	if (pi_test_on(pi_desc) == 1)
189 		__pi_post_block(vcpu);
190 
191 	local_irq_enable();
192 	return (vcpu->pre_pcpu == -1);
193 }
194 
195 void pi_post_block(struct kvm_vcpu *vcpu)
196 {
197 	if (vcpu->pre_pcpu == -1)
198 		return;
199 
200 	WARN_ON(irqs_disabled());
201 	local_irq_disable();
202 	__pi_post_block(vcpu);
203 	local_irq_enable();
204 }
205 
206 /*
207  * Handler for POSTED_INTERRUPT_WAKEUP_VECTOR.
208  */
209 void pi_wakeup_handler(void)
210 {
211 	struct kvm_vcpu *vcpu;
212 	int cpu = smp_processor_id();
213 
214 	spin_lock(&per_cpu(blocked_vcpu_on_cpu_lock, cpu));
215 	list_for_each_entry(vcpu, &per_cpu(blocked_vcpu_on_cpu, cpu),
216 			blocked_vcpu_list) {
217 		struct pi_desc *pi_desc = vcpu_to_pi_desc(vcpu);
218 
219 		if (pi_test_on(pi_desc) == 1)
220 			kvm_vcpu_kick(vcpu);
221 	}
222 	spin_unlock(&per_cpu(blocked_vcpu_on_cpu_lock, cpu));
223 }
224 
225 void __init pi_init_cpu(int cpu)
226 {
227 	INIT_LIST_HEAD(&per_cpu(blocked_vcpu_on_cpu, cpu));
228 	spin_lock_init(&per_cpu(blocked_vcpu_on_cpu_lock, cpu));
229 }
230 
231 bool pi_has_pending_interrupt(struct kvm_vcpu *vcpu)
232 {
233 	struct pi_desc *pi_desc = vcpu_to_pi_desc(vcpu);
234 
235 	return pi_test_on(pi_desc) ||
236 		(pi_test_sn(pi_desc) && !pi_is_pir_empty(pi_desc));
237 }
238 
239 
240 /*
241  * Bail out of the block loop if the VM has an assigned
242  * device, but the blocking vCPU didn't reconfigure the
243  * PI.NV to the wakeup vector, i.e. the assigned device
244  * came along after the initial check in pi_pre_block().
245  */
246 void vmx_pi_start_assignment(struct kvm *kvm)
247 {
248 	if (!irq_remapping_cap(IRQ_POSTING_CAP))
249 		return;
250 
251 	kvm_make_all_cpus_request(kvm, KVM_REQ_UNBLOCK);
252 }
253 
254 /*
255  * pi_update_irte - set IRTE for Posted-Interrupts
256  *
257  * @kvm: kvm
258  * @host_irq: host irq of the interrupt
259  * @guest_irq: gsi of the interrupt
260  * @set: set or unset PI
261  * returns 0 on success, < 0 on failure
262  */
263 int pi_update_irte(struct kvm *kvm, unsigned int host_irq, uint32_t guest_irq,
264 		   bool set)
265 {
266 	struct kvm_kernel_irq_routing_entry *e;
267 	struct kvm_irq_routing_table *irq_rt;
268 	struct kvm_lapic_irq irq;
269 	struct kvm_vcpu *vcpu;
270 	struct vcpu_data vcpu_info;
271 	int idx, ret = 0;
272 
273 	if (!kvm_arch_has_assigned_device(kvm) ||
274 	    !irq_remapping_cap(IRQ_POSTING_CAP) ||
275 	    !kvm_vcpu_apicv_active(kvm->vcpus[0]))
276 		return 0;
277 
278 	idx = srcu_read_lock(&kvm->irq_srcu);
279 	irq_rt = srcu_dereference(kvm->irq_routing, &kvm->irq_srcu);
280 	if (guest_irq >= irq_rt->nr_rt_entries ||
281 	    hlist_empty(&irq_rt->map[guest_irq])) {
282 		pr_warn_once("no route for guest_irq %u/%u (broken user space?)\n",
283 			     guest_irq, irq_rt->nr_rt_entries);
284 		goto out;
285 	}
286 
287 	hlist_for_each_entry(e, &irq_rt->map[guest_irq], link) {
288 		if (e->type != KVM_IRQ_ROUTING_MSI)
289 			continue;
290 		/*
291 		 * VT-d PI cannot support posting multicast/broadcast
292 		 * interrupts to a vCPU, we still use interrupt remapping
293 		 * for these kind of interrupts.
294 		 *
295 		 * For lowest-priority interrupts, we only support
296 		 * those with single CPU as the destination, e.g. user
297 		 * configures the interrupts via /proc/irq or uses
298 		 * irqbalance to make the interrupts single-CPU.
299 		 *
300 		 * We will support full lowest-priority interrupt later.
301 		 *
302 		 * In addition, we can only inject generic interrupts using
303 		 * the PI mechanism, refuse to route others through it.
304 		 */
305 
306 		kvm_set_msi_irq(kvm, e, &irq);
307 		if (!kvm_intr_is_single_vcpu(kvm, &irq, &vcpu) ||
308 		    !kvm_irq_is_postable(&irq)) {
309 			/*
310 			 * Make sure the IRTE is in remapped mode if
311 			 * we don't handle it in posted mode.
312 			 */
313 			ret = irq_set_vcpu_affinity(host_irq, NULL);
314 			if (ret < 0) {
315 				printk(KERN_INFO
316 				   "failed to back to remapped mode, irq: %u\n",
317 				   host_irq);
318 				goto out;
319 			}
320 
321 			continue;
322 		}
323 
324 		vcpu_info.pi_desc_addr = __pa(&to_vmx(vcpu)->pi_desc);
325 		vcpu_info.vector = irq.vector;
326 
327 		trace_kvm_pi_irte_update(host_irq, vcpu->vcpu_id, e->gsi,
328 				vcpu_info.vector, vcpu_info.pi_desc_addr, set);
329 
330 		if (set)
331 			ret = irq_set_vcpu_affinity(host_irq, &vcpu_info);
332 		else
333 			ret = irq_set_vcpu_affinity(host_irq, NULL);
334 
335 		if (ret < 0) {
336 			printk(KERN_INFO "%s: failed to update PI IRTE\n",
337 					__func__);
338 			goto out;
339 		}
340 	}
341 
342 	ret = 0;
343 out:
344 	srcu_read_unlock(&kvm->irq_srcu, idx);
345 	return ret;
346 }
347