xref: /openbmc/linux/arch/x86/kernel/tsc_msr.c (revision aac5987a)
1 /*
2  * tsc_msr.c - TSC frequency enumeration via MSR
3  *
4  * Copyright (C) 2013 Intel Corporation
5  * Author: Bin Gao <bin.gao@intel.com>
6  *
7  * This file is released under the GPLv2.
8  */
9 
10 #include <linux/kernel.h>
11 #include <asm/processor.h>
12 #include <asm/setup.h>
13 #include <asm/apic.h>
14 #include <asm/param.h>
15 
16 #define MAX_NUM_FREQS	9
17 
18 /*
19  * If MSR_PERF_STAT[31] is set, the maximum resolved bus ratio can be
20  * read in MSR_PLATFORM_ID[12:8], otherwise in MSR_PERF_STAT[44:40].
21  * Unfortunately some Intel Atom SoCs aren't quite compliant to this,
22  * so we need manually differentiate SoC families. This is what the
23  * field msr_plat does.
24  */
25 struct freq_desc {
26 	u8 x86_family;	/* CPU family */
27 	u8 x86_model;	/* model */
28 	u8 msr_plat;	/* 1: use MSR_PLATFORM_INFO, 0: MSR_IA32_PERF_STATUS */
29 	u32 freqs[MAX_NUM_FREQS];
30 };
31 
32 static struct freq_desc freq_desc_tables[] = {
33 	/* PNW */
34 	{ 6, 0x27, 0, { 0, 0, 0, 0, 0, 99840, 0, 83200 } },
35 	/* CLV+ */
36 	{ 6, 0x35, 0, { 0, 133200, 0, 0, 0, 99840, 0, 83200 } },
37 	/* TNG - Intel Atom processor Z3400 series */
38 	{ 6, 0x4a, 1, { 0, 100000, 133300, 0, 0, 0, 0, 0 } },
39 	/* VLV2 - Intel Atom processor E3000, Z3600, Z3700 series */
40 	{ 6, 0x37, 1, { 83300, 100000, 133300, 116700, 80000, 0, 0, 0 } },
41 	/* ANN - Intel Atom processor Z3500 series */
42 	{ 6, 0x5a, 1, { 83300, 100000, 133300, 100000, 0, 0, 0, 0 } },
43 	/* AMT - Intel Atom processor X7-Z8000 and X5-Z8000 series */
44 	{ 6, 0x4c, 1, { 83300, 100000, 133300, 116700,
45 			80000, 93300, 90000, 88900, 87500 } },
46 };
47 
48 static int match_cpu(u8 family, u8 model)
49 {
50 	int i;
51 
52 	for (i = 0; i < ARRAY_SIZE(freq_desc_tables); i++) {
53 		if ((family == freq_desc_tables[i].x86_family) &&
54 			(model == freq_desc_tables[i].x86_model))
55 			return i;
56 	}
57 
58 	return -1;
59 }
60 
61 /* Map CPU reference clock freq ID(0-7) to CPU reference clock freq(KHz) */
62 #define id_to_freq(cpu_index, freq_id) \
63 	(freq_desc_tables[cpu_index].freqs[freq_id])
64 
65 /*
66  * MSR-based CPU/TSC frequency discovery for certain CPUs.
67  *
68  * Set global "lapic_timer_frequency" to bus_clock_cycles/jiffy
69  * Return processor base frequency in KHz, or 0 on failure.
70  */
71 unsigned long cpu_khz_from_msr(void)
72 {
73 	u32 lo, hi, ratio, freq_id, freq;
74 	unsigned long res;
75 	int cpu_index;
76 
77 	if (boot_cpu_data.x86_vendor != X86_VENDOR_INTEL)
78 		return 0;
79 
80 	cpu_index = match_cpu(boot_cpu_data.x86, boot_cpu_data.x86_model);
81 	if (cpu_index < 0)
82 		return 0;
83 
84 	if (freq_desc_tables[cpu_index].msr_plat) {
85 		rdmsr(MSR_PLATFORM_INFO, lo, hi);
86 		ratio = (lo >> 8) & 0xff;
87 	} else {
88 		rdmsr(MSR_IA32_PERF_STATUS, lo, hi);
89 		ratio = (hi >> 8) & 0x1f;
90 	}
91 
92 	/* Get FSB FREQ ID */
93 	rdmsr(MSR_FSB_FREQ, lo, hi);
94 	freq_id = lo & 0x7;
95 	freq = id_to_freq(cpu_index, freq_id);
96 
97 	/* TSC frequency = maximum resolved freq * maximum resolved bus ratio */
98 	res = freq * ratio;
99 
100 #ifdef CONFIG_X86_LOCAL_APIC
101 	lapic_timer_frequency = (freq * 1000) / HZ;
102 #endif
103 
104 	/*
105 	 * TSC frequency determined by MSR is always considered "known"
106 	 * because it is reported by HW.
107 	 * Another fact is that on MSR capable platforms, PIT/HPET is
108 	 * generally not available so calibration won't work at all.
109 	 */
110 	setup_force_cpu_cap(X86_FEATURE_TSC_KNOWN_FREQ);
111 
112 	/*
113 	 * Unfortunately there is no way for hardware to tell whether the
114 	 * TSC is reliable.  We were told by silicon design team that TSC
115 	 * on Atom SoCs are always "reliable". TSC is also the only
116 	 * reliable clocksource on these SoCs (HPET is either not present
117 	 * or not functional) so mark TSC reliable which removes the
118 	 * requirement for a watchdog clocksource.
119 	 */
120 	setup_force_cpu_cap(X86_FEATURE_TSC_RELIABLE);
121 
122 	return res;
123 }
124