1 // SPDX-License-Identifier: GPL-2.0-only 2 /* 3 * Copyright (C) 1995 Linus Torvalds 4 * 5 * This file contains the setup_arch() code, which handles the architecture-dependent 6 * parts of early kernel initialization. 7 */ 8 #include <linux/acpi.h> 9 #include <linux/console.h> 10 #include <linux/crash_dump.h> 11 #include <linux/dma-map-ops.h> 12 #include <linux/dmi.h> 13 #include <linux/efi.h> 14 #include <linux/init_ohci1394_dma.h> 15 #include <linux/initrd.h> 16 #include <linux/iscsi_ibft.h> 17 #include <linux/memblock.h> 18 #include <linux/panic_notifier.h> 19 #include <linux/pci.h> 20 #include <linux/root_dev.h> 21 #include <linux/hugetlb.h> 22 #include <linux/tboot.h> 23 #include <linux/usb/xhci-dbgp.h> 24 #include <linux/static_call.h> 25 #include <linux/swiotlb.h> 26 27 #include <uapi/linux/mount.h> 28 29 #include <xen/xen.h> 30 31 #include <asm/apic.h> 32 #include <asm/numa.h> 33 #include <asm/bios_ebda.h> 34 #include <asm/bugs.h> 35 #include <asm/cpu.h> 36 #include <asm/efi.h> 37 #include <asm/gart.h> 38 #include <asm/hypervisor.h> 39 #include <asm/io_apic.h> 40 #include <asm/kasan.h> 41 #include <asm/kaslr.h> 42 #include <asm/mce.h> 43 #include <asm/mtrr.h> 44 #include <asm/realmode.h> 45 #include <asm/olpc_ofw.h> 46 #include <asm/pci-direct.h> 47 #include <asm/prom.h> 48 #include <asm/proto.h> 49 #include <asm/thermal.h> 50 #include <asm/unwind.h> 51 #include <asm/vsyscall.h> 52 #include <linux/vmalloc.h> 53 54 /* 55 * max_low_pfn_mapped: highest directly mapped pfn < 4 GB 56 * max_pfn_mapped: highest directly mapped pfn > 4 GB 57 * 58 * The direct mapping only covers E820_TYPE_RAM regions, so the ranges and gaps are 59 * represented by pfn_mapped[]. 60 */ 61 unsigned long max_low_pfn_mapped; 62 unsigned long max_pfn_mapped; 63 64 #ifdef CONFIG_DMI 65 RESERVE_BRK(dmi_alloc, 65536); 66 #endif 67 68 69 /* 70 * Range of the BSS area. The size of the BSS area is determined 71 * at link time, with RESERVE_BRK() facility reserving additional 72 * chunks. 73 */ 74 unsigned long _brk_start = (unsigned long)__brk_base; 75 unsigned long _brk_end = (unsigned long)__brk_base; 76 77 struct boot_params boot_params; 78 79 /* 80 * These are the four main kernel memory regions, we put them into 81 * the resource tree so that kdump tools and other debugging tools 82 * recover it: 83 */ 84 85 static struct resource rodata_resource = { 86 .name = "Kernel rodata", 87 .start = 0, 88 .end = 0, 89 .flags = IORESOURCE_BUSY | IORESOURCE_SYSTEM_RAM 90 }; 91 92 static struct resource data_resource = { 93 .name = "Kernel data", 94 .start = 0, 95 .end = 0, 96 .flags = IORESOURCE_BUSY | IORESOURCE_SYSTEM_RAM 97 }; 98 99 static struct resource code_resource = { 100 .name = "Kernel code", 101 .start = 0, 102 .end = 0, 103 .flags = IORESOURCE_BUSY | IORESOURCE_SYSTEM_RAM 104 }; 105 106 static struct resource bss_resource = { 107 .name = "Kernel bss", 108 .start = 0, 109 .end = 0, 110 .flags = IORESOURCE_BUSY | IORESOURCE_SYSTEM_RAM 111 }; 112 113 114 #ifdef CONFIG_X86_32 115 /* CPU data as detected by the assembly code in head_32.S */ 116 struct cpuinfo_x86 new_cpu_data; 117 118 /* Common CPU data for all CPUs */ 119 struct cpuinfo_x86 boot_cpu_data __read_mostly; 120 EXPORT_SYMBOL(boot_cpu_data); 121 122 unsigned int def_to_bigsmp; 123 124 struct apm_info apm_info; 125 EXPORT_SYMBOL(apm_info); 126 127 #if defined(CONFIG_X86_SPEEDSTEP_SMI) || \ 128 defined(CONFIG_X86_SPEEDSTEP_SMI_MODULE) 129 struct ist_info ist_info; 130 EXPORT_SYMBOL(ist_info); 131 #else 132 struct ist_info ist_info; 133 #endif 134 135 #else 136 struct cpuinfo_x86 boot_cpu_data __read_mostly; 137 EXPORT_SYMBOL(boot_cpu_data); 138 #endif 139 140 141 #if !defined(CONFIG_X86_PAE) || defined(CONFIG_X86_64) 142 __visible unsigned long mmu_cr4_features __ro_after_init; 143 #else 144 __visible unsigned long mmu_cr4_features __ro_after_init = X86_CR4_PAE; 145 #endif 146 147 /* Boot loader ID and version as integers, for the benefit of proc_dointvec */ 148 int bootloader_type, bootloader_version; 149 150 /* 151 * Setup options 152 */ 153 struct screen_info screen_info; 154 EXPORT_SYMBOL(screen_info); 155 struct edid_info edid_info; 156 EXPORT_SYMBOL_GPL(edid_info); 157 158 extern int root_mountflags; 159 160 unsigned long saved_video_mode; 161 162 #define RAMDISK_IMAGE_START_MASK 0x07FF 163 #define RAMDISK_PROMPT_FLAG 0x8000 164 #define RAMDISK_LOAD_FLAG 0x4000 165 166 static char __initdata command_line[COMMAND_LINE_SIZE]; 167 #ifdef CONFIG_CMDLINE_BOOL 168 static char __initdata builtin_cmdline[COMMAND_LINE_SIZE] = CONFIG_CMDLINE; 169 #endif 170 171 #if defined(CONFIG_EDD) || defined(CONFIG_EDD_MODULE) 172 struct edd edd; 173 #ifdef CONFIG_EDD_MODULE 174 EXPORT_SYMBOL(edd); 175 #endif 176 /** 177 * copy_edd() - Copy the BIOS EDD information 178 * from boot_params into a safe place. 179 * 180 */ 181 static inline void __init copy_edd(void) 182 { 183 memcpy(edd.mbr_signature, boot_params.edd_mbr_sig_buffer, 184 sizeof(edd.mbr_signature)); 185 memcpy(edd.edd_info, boot_params.eddbuf, sizeof(edd.edd_info)); 186 edd.mbr_signature_nr = boot_params.edd_mbr_sig_buf_entries; 187 edd.edd_info_nr = boot_params.eddbuf_entries; 188 } 189 #else 190 static inline void __init copy_edd(void) 191 { 192 } 193 #endif 194 195 void * __init extend_brk(size_t size, size_t align) 196 { 197 size_t mask = align - 1; 198 void *ret; 199 200 BUG_ON(_brk_start == 0); 201 BUG_ON(align & mask); 202 203 _brk_end = (_brk_end + mask) & ~mask; 204 BUG_ON((char *)(_brk_end + size) > __brk_limit); 205 206 ret = (void *)_brk_end; 207 _brk_end += size; 208 209 memset(ret, 0, size); 210 211 return ret; 212 } 213 214 #ifdef CONFIG_X86_32 215 static void __init cleanup_highmap(void) 216 { 217 } 218 #endif 219 220 static void __init reserve_brk(void) 221 { 222 if (_brk_end > _brk_start) 223 memblock_reserve(__pa_symbol(_brk_start), 224 _brk_end - _brk_start); 225 226 /* Mark brk area as locked down and no longer taking any 227 new allocations */ 228 _brk_start = 0; 229 } 230 231 u64 relocated_ramdisk; 232 233 #ifdef CONFIG_BLK_DEV_INITRD 234 235 static u64 __init get_ramdisk_image(void) 236 { 237 u64 ramdisk_image = boot_params.hdr.ramdisk_image; 238 239 ramdisk_image |= (u64)boot_params.ext_ramdisk_image << 32; 240 241 if (ramdisk_image == 0) 242 ramdisk_image = phys_initrd_start; 243 244 return ramdisk_image; 245 } 246 static u64 __init get_ramdisk_size(void) 247 { 248 u64 ramdisk_size = boot_params.hdr.ramdisk_size; 249 250 ramdisk_size |= (u64)boot_params.ext_ramdisk_size << 32; 251 252 if (ramdisk_size == 0) 253 ramdisk_size = phys_initrd_size; 254 255 return ramdisk_size; 256 } 257 258 static void __init relocate_initrd(void) 259 { 260 /* Assume only end is not page aligned */ 261 u64 ramdisk_image = get_ramdisk_image(); 262 u64 ramdisk_size = get_ramdisk_size(); 263 u64 area_size = PAGE_ALIGN(ramdisk_size); 264 265 /* We need to move the initrd down into directly mapped mem */ 266 relocated_ramdisk = memblock_phys_alloc_range(area_size, PAGE_SIZE, 0, 267 PFN_PHYS(max_pfn_mapped)); 268 if (!relocated_ramdisk) 269 panic("Cannot find place for new RAMDISK of size %lld\n", 270 ramdisk_size); 271 272 initrd_start = relocated_ramdisk + PAGE_OFFSET; 273 initrd_end = initrd_start + ramdisk_size; 274 printk(KERN_INFO "Allocated new RAMDISK: [mem %#010llx-%#010llx]\n", 275 relocated_ramdisk, relocated_ramdisk + ramdisk_size - 1); 276 277 copy_from_early_mem((void *)initrd_start, ramdisk_image, ramdisk_size); 278 279 printk(KERN_INFO "Move RAMDISK from [mem %#010llx-%#010llx] to" 280 " [mem %#010llx-%#010llx]\n", 281 ramdisk_image, ramdisk_image + ramdisk_size - 1, 282 relocated_ramdisk, relocated_ramdisk + ramdisk_size - 1); 283 } 284 285 static void __init early_reserve_initrd(void) 286 { 287 /* Assume only end is not page aligned */ 288 u64 ramdisk_image = get_ramdisk_image(); 289 u64 ramdisk_size = get_ramdisk_size(); 290 u64 ramdisk_end = PAGE_ALIGN(ramdisk_image + ramdisk_size); 291 292 if (!boot_params.hdr.type_of_loader || 293 !ramdisk_image || !ramdisk_size) 294 return; /* No initrd provided by bootloader */ 295 296 memblock_reserve(ramdisk_image, ramdisk_end - ramdisk_image); 297 } 298 299 static void __init reserve_initrd(void) 300 { 301 /* Assume only end is not page aligned */ 302 u64 ramdisk_image = get_ramdisk_image(); 303 u64 ramdisk_size = get_ramdisk_size(); 304 u64 ramdisk_end = PAGE_ALIGN(ramdisk_image + ramdisk_size); 305 306 if (!boot_params.hdr.type_of_loader || 307 !ramdisk_image || !ramdisk_size) 308 return; /* No initrd provided by bootloader */ 309 310 initrd_start = 0; 311 312 printk(KERN_INFO "RAMDISK: [mem %#010llx-%#010llx]\n", ramdisk_image, 313 ramdisk_end - 1); 314 315 if (pfn_range_is_mapped(PFN_DOWN(ramdisk_image), 316 PFN_DOWN(ramdisk_end))) { 317 /* All are mapped, easy case */ 318 initrd_start = ramdisk_image + PAGE_OFFSET; 319 initrd_end = initrd_start + ramdisk_size; 320 return; 321 } 322 323 relocate_initrd(); 324 325 memblock_free(ramdisk_image, ramdisk_end - ramdisk_image); 326 } 327 328 #else 329 static void __init early_reserve_initrd(void) 330 { 331 } 332 static void __init reserve_initrd(void) 333 { 334 } 335 #endif /* CONFIG_BLK_DEV_INITRD */ 336 337 static void __init parse_setup_data(void) 338 { 339 struct setup_data *data; 340 u64 pa_data, pa_next; 341 342 pa_data = boot_params.hdr.setup_data; 343 while (pa_data) { 344 u32 data_len, data_type; 345 346 data = early_memremap(pa_data, sizeof(*data)); 347 data_len = data->len + sizeof(struct setup_data); 348 data_type = data->type; 349 pa_next = data->next; 350 early_memunmap(data, sizeof(*data)); 351 352 switch (data_type) { 353 case SETUP_E820_EXT: 354 e820__memory_setup_extended(pa_data, data_len); 355 break; 356 case SETUP_DTB: 357 add_dtb(pa_data); 358 break; 359 case SETUP_EFI: 360 parse_efi_setup(pa_data, data_len); 361 break; 362 default: 363 break; 364 } 365 pa_data = pa_next; 366 } 367 } 368 369 static void __init memblock_x86_reserve_range_setup_data(void) 370 { 371 struct setup_data *data; 372 u64 pa_data; 373 374 pa_data = boot_params.hdr.setup_data; 375 while (pa_data) { 376 data = early_memremap(pa_data, sizeof(*data)); 377 memblock_reserve(pa_data, sizeof(*data) + data->len); 378 379 if (data->type == SETUP_INDIRECT && 380 ((struct setup_indirect *)data->data)->type != SETUP_INDIRECT) 381 memblock_reserve(((struct setup_indirect *)data->data)->addr, 382 ((struct setup_indirect *)data->data)->len); 383 384 pa_data = data->next; 385 early_memunmap(data, sizeof(*data)); 386 } 387 } 388 389 /* 390 * --------- Crashkernel reservation ------------------------------ 391 */ 392 393 #ifdef CONFIG_KEXEC_CORE 394 395 /* 16M alignment for crash kernel regions */ 396 #define CRASH_ALIGN SZ_16M 397 398 /* 399 * Keep the crash kernel below this limit. 400 * 401 * Earlier 32-bits kernels would limit the kernel to the low 512 MB range 402 * due to mapping restrictions. 403 * 404 * 64-bit kdump kernels need to be restricted to be under 64 TB, which is 405 * the upper limit of system RAM in 4-level paging mode. Since the kdump 406 * jump could be from 5-level paging to 4-level paging, the jump will fail if 407 * the kernel is put above 64 TB, and during the 1st kernel bootup there's 408 * no good way to detect the paging mode of the target kernel which will be 409 * loaded for dumping. 410 */ 411 #ifdef CONFIG_X86_32 412 # define CRASH_ADDR_LOW_MAX SZ_512M 413 # define CRASH_ADDR_HIGH_MAX SZ_512M 414 #else 415 # define CRASH_ADDR_LOW_MAX SZ_4G 416 # define CRASH_ADDR_HIGH_MAX SZ_64T 417 #endif 418 419 static int __init reserve_crashkernel_low(void) 420 { 421 #ifdef CONFIG_X86_64 422 unsigned long long base, low_base = 0, low_size = 0; 423 unsigned long low_mem_limit; 424 int ret; 425 426 low_mem_limit = min(memblock_phys_mem_size(), CRASH_ADDR_LOW_MAX); 427 428 /* crashkernel=Y,low */ 429 ret = parse_crashkernel_low(boot_command_line, low_mem_limit, &low_size, &base); 430 if (ret) { 431 /* 432 * two parts from kernel/dma/swiotlb.c: 433 * -swiotlb size: user-specified with swiotlb= or default. 434 * 435 * -swiotlb overflow buffer: now hardcoded to 32k. We round it 436 * to 8M for other buffers that may need to stay low too. Also 437 * make sure we allocate enough extra low memory so that we 438 * don't run out of DMA buffers for 32-bit devices. 439 */ 440 low_size = max(swiotlb_size_or_default() + (8UL << 20), 256UL << 20); 441 } else { 442 /* passed with crashkernel=0,low ? */ 443 if (!low_size) 444 return 0; 445 } 446 447 low_base = memblock_phys_alloc_range(low_size, CRASH_ALIGN, 0, CRASH_ADDR_LOW_MAX); 448 if (!low_base) { 449 pr_err("Cannot reserve %ldMB crashkernel low memory, please try smaller size.\n", 450 (unsigned long)(low_size >> 20)); 451 return -ENOMEM; 452 } 453 454 pr_info("Reserving %ldMB of low memory at %ldMB for crashkernel (low RAM limit: %ldMB)\n", 455 (unsigned long)(low_size >> 20), 456 (unsigned long)(low_base >> 20), 457 (unsigned long)(low_mem_limit >> 20)); 458 459 crashk_low_res.start = low_base; 460 crashk_low_res.end = low_base + low_size - 1; 461 insert_resource(&iomem_resource, &crashk_low_res); 462 #endif 463 return 0; 464 } 465 466 static void __init reserve_crashkernel(void) 467 { 468 unsigned long long crash_size, crash_base, total_mem; 469 bool high = false; 470 int ret; 471 472 total_mem = memblock_phys_mem_size(); 473 474 /* crashkernel=XM */ 475 ret = parse_crashkernel(boot_command_line, total_mem, &crash_size, &crash_base); 476 if (ret != 0 || crash_size <= 0) { 477 /* crashkernel=X,high */ 478 ret = parse_crashkernel_high(boot_command_line, total_mem, 479 &crash_size, &crash_base); 480 if (ret != 0 || crash_size <= 0) 481 return; 482 high = true; 483 } 484 485 if (xen_pv_domain()) { 486 pr_info("Ignoring crashkernel for a Xen PV domain\n"); 487 return; 488 } 489 490 /* 0 means: find the address automatically */ 491 if (!crash_base) { 492 /* 493 * Set CRASH_ADDR_LOW_MAX upper bound for crash memory, 494 * crashkernel=x,high reserves memory over 4G, also allocates 495 * 256M extra low memory for DMA buffers and swiotlb. 496 * But the extra memory is not required for all machines. 497 * So try low memory first and fall back to high memory 498 * unless "crashkernel=size[KMG],high" is specified. 499 */ 500 if (!high) 501 crash_base = memblock_phys_alloc_range(crash_size, 502 CRASH_ALIGN, CRASH_ALIGN, 503 CRASH_ADDR_LOW_MAX); 504 if (!crash_base) 505 crash_base = memblock_phys_alloc_range(crash_size, 506 CRASH_ALIGN, CRASH_ALIGN, 507 CRASH_ADDR_HIGH_MAX); 508 if (!crash_base) { 509 pr_info("crashkernel reservation failed - No suitable area found.\n"); 510 return; 511 } 512 } else { 513 unsigned long long start; 514 515 start = memblock_phys_alloc_range(crash_size, SZ_1M, crash_base, 516 crash_base + crash_size); 517 if (start != crash_base) { 518 pr_info("crashkernel reservation failed - memory is in use.\n"); 519 return; 520 } 521 } 522 523 if (crash_base >= (1ULL << 32) && reserve_crashkernel_low()) { 524 memblock_free(crash_base, crash_size); 525 return; 526 } 527 528 pr_info("Reserving %ldMB of memory at %ldMB for crashkernel (System RAM: %ldMB)\n", 529 (unsigned long)(crash_size >> 20), 530 (unsigned long)(crash_base >> 20), 531 (unsigned long)(total_mem >> 20)); 532 533 crashk_res.start = crash_base; 534 crashk_res.end = crash_base + crash_size - 1; 535 insert_resource(&iomem_resource, &crashk_res); 536 } 537 #else 538 static void __init reserve_crashkernel(void) 539 { 540 } 541 #endif 542 543 static struct resource standard_io_resources[] = { 544 { .name = "dma1", .start = 0x00, .end = 0x1f, 545 .flags = IORESOURCE_BUSY | IORESOURCE_IO }, 546 { .name = "pic1", .start = 0x20, .end = 0x21, 547 .flags = IORESOURCE_BUSY | IORESOURCE_IO }, 548 { .name = "timer0", .start = 0x40, .end = 0x43, 549 .flags = IORESOURCE_BUSY | IORESOURCE_IO }, 550 { .name = "timer1", .start = 0x50, .end = 0x53, 551 .flags = IORESOURCE_BUSY | IORESOURCE_IO }, 552 { .name = "keyboard", .start = 0x60, .end = 0x60, 553 .flags = IORESOURCE_BUSY | IORESOURCE_IO }, 554 { .name = "keyboard", .start = 0x64, .end = 0x64, 555 .flags = IORESOURCE_BUSY | IORESOURCE_IO }, 556 { .name = "dma page reg", .start = 0x80, .end = 0x8f, 557 .flags = IORESOURCE_BUSY | IORESOURCE_IO }, 558 { .name = "pic2", .start = 0xa0, .end = 0xa1, 559 .flags = IORESOURCE_BUSY | IORESOURCE_IO }, 560 { .name = "dma2", .start = 0xc0, .end = 0xdf, 561 .flags = IORESOURCE_BUSY | IORESOURCE_IO }, 562 { .name = "fpu", .start = 0xf0, .end = 0xff, 563 .flags = IORESOURCE_BUSY | IORESOURCE_IO } 564 }; 565 566 void __init reserve_standard_io_resources(void) 567 { 568 int i; 569 570 /* request I/O space for devices used on all i[345]86 PCs */ 571 for (i = 0; i < ARRAY_SIZE(standard_io_resources); i++) 572 request_resource(&ioport_resource, &standard_io_resources[i]); 573 574 } 575 576 static bool __init snb_gfx_workaround_needed(void) 577 { 578 #ifdef CONFIG_PCI 579 int i; 580 u16 vendor, devid; 581 static const __initconst u16 snb_ids[] = { 582 0x0102, 583 0x0112, 584 0x0122, 585 0x0106, 586 0x0116, 587 0x0126, 588 0x010a, 589 }; 590 591 /* Assume no if something weird is going on with PCI */ 592 if (!early_pci_allowed()) 593 return false; 594 595 vendor = read_pci_config_16(0, 2, 0, PCI_VENDOR_ID); 596 if (vendor != 0x8086) 597 return false; 598 599 devid = read_pci_config_16(0, 2, 0, PCI_DEVICE_ID); 600 for (i = 0; i < ARRAY_SIZE(snb_ids); i++) 601 if (devid == snb_ids[i]) 602 return true; 603 #endif 604 605 return false; 606 } 607 608 /* 609 * Sandy Bridge graphics has trouble with certain ranges, exclude 610 * them from allocation. 611 */ 612 static void __init trim_snb_memory(void) 613 { 614 static const __initconst unsigned long bad_pages[] = { 615 0x20050000, 616 0x20110000, 617 0x20130000, 618 0x20138000, 619 0x40004000, 620 }; 621 int i; 622 623 if (!snb_gfx_workaround_needed()) 624 return; 625 626 printk(KERN_DEBUG "reserving inaccessible SNB gfx pages\n"); 627 628 /* 629 * SandyBridge integrated graphics devices have a bug that prevents 630 * them from accessing certain memory ranges, namely anything below 631 * 1M and in the pages listed in bad_pages[] above. 632 * 633 * To avoid these pages being ever accessed by SNB gfx devices reserve 634 * bad_pages that have not already been reserved at boot time. 635 * All memory below the 1 MB mark is anyway reserved later during 636 * setup_arch(), so there is no need to reserve it here. 637 */ 638 639 for (i = 0; i < ARRAY_SIZE(bad_pages); i++) { 640 if (memblock_reserve(bad_pages[i], PAGE_SIZE)) 641 printk(KERN_WARNING "failed to reserve 0x%08lx\n", 642 bad_pages[i]); 643 } 644 } 645 646 static void __init trim_bios_range(void) 647 { 648 /* 649 * A special case is the first 4Kb of memory; 650 * This is a BIOS owned area, not kernel ram, but generally 651 * not listed as such in the E820 table. 652 * 653 * This typically reserves additional memory (64KiB by default) 654 * since some BIOSes are known to corrupt low memory. See the 655 * Kconfig help text for X86_RESERVE_LOW. 656 */ 657 e820__range_update(0, PAGE_SIZE, E820_TYPE_RAM, E820_TYPE_RESERVED); 658 659 /* 660 * special case: Some BIOSes report the PC BIOS 661 * area (640Kb -> 1Mb) as RAM even though it is not. 662 * take them out. 663 */ 664 e820__range_remove(BIOS_BEGIN, BIOS_END - BIOS_BEGIN, E820_TYPE_RAM, 1); 665 666 e820__update_table(e820_table); 667 } 668 669 /* called before trim_bios_range() to spare extra sanitize */ 670 static void __init e820_add_kernel_range(void) 671 { 672 u64 start = __pa_symbol(_text); 673 u64 size = __pa_symbol(_end) - start; 674 675 /* 676 * Complain if .text .data and .bss are not marked as E820_TYPE_RAM and 677 * attempt to fix it by adding the range. We may have a confused BIOS, 678 * or the user may have used memmap=exactmap or memmap=xxM$yyM to 679 * exclude kernel range. If we really are running on top non-RAM, 680 * we will crash later anyways. 681 */ 682 if (e820__mapped_all(start, start + size, E820_TYPE_RAM)) 683 return; 684 685 pr_warn(".text .data .bss are not marked as E820_TYPE_RAM!\n"); 686 e820__range_remove(start, size, E820_TYPE_RAM, 0); 687 e820__range_add(start, size, E820_TYPE_RAM); 688 } 689 690 static void __init early_reserve_memory(void) 691 { 692 /* 693 * Reserve the memory occupied by the kernel between _text and 694 * __end_of_kernel_reserve symbols. Any kernel sections after the 695 * __end_of_kernel_reserve symbol must be explicitly reserved with a 696 * separate memblock_reserve() or they will be discarded. 697 */ 698 memblock_reserve(__pa_symbol(_text), 699 (unsigned long)__end_of_kernel_reserve - (unsigned long)_text); 700 701 /* 702 * The first 4Kb of memory is a BIOS owned area, but generally it is 703 * not listed as such in the E820 table. 704 * 705 * Reserve the first 64K of memory since some BIOSes are known to 706 * corrupt low memory. After the real mode trampoline is allocated the 707 * rest of the memory below 640k is reserved. 708 * 709 * In addition, make sure page 0 is always reserved because on 710 * systems with L1TF its contents can be leaked to user processes. 711 */ 712 memblock_reserve(0, SZ_64K); 713 714 early_reserve_initrd(); 715 716 if (efi_enabled(EFI_BOOT)) 717 efi_memblock_x86_reserve_range(); 718 719 memblock_x86_reserve_range_setup_data(); 720 721 reserve_ibft_region(); 722 reserve_bios_regions(); 723 trim_snb_memory(); 724 } 725 726 /* 727 * Dump out kernel offset information on panic. 728 */ 729 static int 730 dump_kernel_offset(struct notifier_block *self, unsigned long v, void *p) 731 { 732 if (kaslr_enabled()) { 733 pr_emerg("Kernel Offset: 0x%lx from 0x%lx (relocation range: 0x%lx-0x%lx)\n", 734 kaslr_offset(), 735 __START_KERNEL, 736 __START_KERNEL_map, 737 MODULES_VADDR-1); 738 } else { 739 pr_emerg("Kernel Offset: disabled\n"); 740 } 741 742 return 0; 743 } 744 745 /* 746 * Determine if we were loaded by an EFI loader. If so, then we have also been 747 * passed the efi memmap, systab, etc., so we should use these data structures 748 * for initialization. Note, the efi init code path is determined by the 749 * global efi_enabled. This allows the same kernel image to be used on existing 750 * systems (with a traditional BIOS) as well as on EFI systems. 751 */ 752 /* 753 * setup_arch - architecture-specific boot-time initializations 754 * 755 * Note: On x86_64, fixmaps are ready for use even before this is called. 756 */ 757 758 void __init setup_arch(char **cmdline_p) 759 { 760 #ifdef CONFIG_X86_32 761 memcpy(&boot_cpu_data, &new_cpu_data, sizeof(new_cpu_data)); 762 763 /* 764 * copy kernel address range established so far and switch 765 * to the proper swapper page table 766 */ 767 clone_pgd_range(swapper_pg_dir + KERNEL_PGD_BOUNDARY, 768 initial_page_table + KERNEL_PGD_BOUNDARY, 769 KERNEL_PGD_PTRS); 770 771 load_cr3(swapper_pg_dir); 772 /* 773 * Note: Quark X1000 CPUs advertise PGE incorrectly and require 774 * a cr3 based tlb flush, so the following __flush_tlb_all() 775 * will not flush anything because the CPU quirk which clears 776 * X86_FEATURE_PGE has not been invoked yet. Though due to the 777 * load_cr3() above the TLB has been flushed already. The 778 * quirk is invoked before subsequent calls to __flush_tlb_all() 779 * so proper operation is guaranteed. 780 */ 781 __flush_tlb_all(); 782 #else 783 printk(KERN_INFO "Command line: %s\n", boot_command_line); 784 boot_cpu_data.x86_phys_bits = MAX_PHYSMEM_BITS; 785 #endif 786 787 /* 788 * If we have OLPC OFW, we might end up relocating the fixmap due to 789 * reserve_top(), so do this before touching the ioremap area. 790 */ 791 olpc_ofw_detect(); 792 793 idt_setup_early_traps(); 794 early_cpu_init(); 795 jump_label_init(); 796 static_call_init(); 797 early_ioremap_init(); 798 799 setup_olpc_ofw_pgd(); 800 801 ROOT_DEV = old_decode_dev(boot_params.hdr.root_dev); 802 screen_info = boot_params.screen_info; 803 edid_info = boot_params.edid_info; 804 #ifdef CONFIG_X86_32 805 apm_info.bios = boot_params.apm_bios_info; 806 ist_info = boot_params.ist_info; 807 #endif 808 saved_video_mode = boot_params.hdr.vid_mode; 809 bootloader_type = boot_params.hdr.type_of_loader; 810 if ((bootloader_type >> 4) == 0xe) { 811 bootloader_type &= 0xf; 812 bootloader_type |= (boot_params.hdr.ext_loader_type+0x10) << 4; 813 } 814 bootloader_version = bootloader_type & 0xf; 815 bootloader_version |= boot_params.hdr.ext_loader_ver << 4; 816 817 #ifdef CONFIG_BLK_DEV_RAM 818 rd_image_start = boot_params.hdr.ram_size & RAMDISK_IMAGE_START_MASK; 819 #endif 820 #ifdef CONFIG_EFI 821 if (!strncmp((char *)&boot_params.efi_info.efi_loader_signature, 822 EFI32_LOADER_SIGNATURE, 4)) { 823 set_bit(EFI_BOOT, &efi.flags); 824 } else if (!strncmp((char *)&boot_params.efi_info.efi_loader_signature, 825 EFI64_LOADER_SIGNATURE, 4)) { 826 set_bit(EFI_BOOT, &efi.flags); 827 set_bit(EFI_64BIT, &efi.flags); 828 } 829 #endif 830 831 x86_init.oem.arch_setup(); 832 833 /* 834 * Do some memory reservations *before* memory is added to memblock, so 835 * memblock allocations won't overwrite it. 836 * 837 * After this point, everything still needed from the boot loader or 838 * firmware or kernel text should be early reserved or marked not RAM in 839 * e820. All other memory is free game. 840 * 841 * This call needs to happen before e820__memory_setup() which calls the 842 * xen_memory_setup() on Xen dom0 which relies on the fact that those 843 * early reservations have happened already. 844 */ 845 early_reserve_memory(); 846 847 iomem_resource.end = (1ULL << boot_cpu_data.x86_phys_bits) - 1; 848 e820__memory_setup(); 849 parse_setup_data(); 850 851 copy_edd(); 852 853 if (!boot_params.hdr.root_flags) 854 root_mountflags &= ~MS_RDONLY; 855 setup_initial_init_mm(_text, _etext, _edata, (void *)_brk_end); 856 857 code_resource.start = __pa_symbol(_text); 858 code_resource.end = __pa_symbol(_etext)-1; 859 rodata_resource.start = __pa_symbol(__start_rodata); 860 rodata_resource.end = __pa_symbol(__end_rodata)-1; 861 data_resource.start = __pa_symbol(_sdata); 862 data_resource.end = __pa_symbol(_edata)-1; 863 bss_resource.start = __pa_symbol(__bss_start); 864 bss_resource.end = __pa_symbol(__bss_stop)-1; 865 866 #ifdef CONFIG_CMDLINE_BOOL 867 #ifdef CONFIG_CMDLINE_OVERRIDE 868 strlcpy(boot_command_line, builtin_cmdline, COMMAND_LINE_SIZE); 869 #else 870 if (builtin_cmdline[0]) { 871 /* append boot loader cmdline to builtin */ 872 strlcat(builtin_cmdline, " ", COMMAND_LINE_SIZE); 873 strlcat(builtin_cmdline, boot_command_line, COMMAND_LINE_SIZE); 874 strlcpy(boot_command_line, builtin_cmdline, COMMAND_LINE_SIZE); 875 } 876 #endif 877 #endif 878 879 strlcpy(command_line, boot_command_line, COMMAND_LINE_SIZE); 880 *cmdline_p = command_line; 881 882 /* 883 * x86_configure_nx() is called before parse_early_param() to detect 884 * whether hardware doesn't support NX (so that the early EHCI debug 885 * console setup can safely call set_fixmap()). It may then be called 886 * again from within noexec_setup() during parsing early parameters 887 * to honor the respective command line option. 888 */ 889 x86_configure_nx(); 890 891 parse_early_param(); 892 893 #ifdef CONFIG_MEMORY_HOTPLUG 894 /* 895 * Memory used by the kernel cannot be hot-removed because Linux 896 * cannot migrate the kernel pages. When memory hotplug is 897 * enabled, we should prevent memblock from allocating memory 898 * for the kernel. 899 * 900 * ACPI SRAT records all hotpluggable memory ranges. But before 901 * SRAT is parsed, we don't know about it. 902 * 903 * The kernel image is loaded into memory at very early time. We 904 * cannot prevent this anyway. So on NUMA system, we set any 905 * node the kernel resides in as un-hotpluggable. 906 * 907 * Since on modern servers, one node could have double-digit 908 * gigabytes memory, we can assume the memory around the kernel 909 * image is also un-hotpluggable. So before SRAT is parsed, just 910 * allocate memory near the kernel image to try the best to keep 911 * the kernel away from hotpluggable memory. 912 */ 913 if (movable_node_is_enabled()) 914 memblock_set_bottom_up(true); 915 #endif 916 917 x86_report_nx(); 918 919 if (acpi_mps_check()) { 920 #ifdef CONFIG_X86_LOCAL_APIC 921 disable_apic = 1; 922 #endif 923 setup_clear_cpu_cap(X86_FEATURE_APIC); 924 } 925 926 e820__reserve_setup_data(); 927 e820__finish_early_params(); 928 929 if (efi_enabled(EFI_BOOT)) 930 efi_init(); 931 932 dmi_setup(); 933 934 /* 935 * VMware detection requires dmi to be available, so this 936 * needs to be done after dmi_setup(), for the boot CPU. 937 */ 938 init_hypervisor_platform(); 939 940 tsc_early_init(); 941 x86_init.resources.probe_roms(); 942 943 /* after parse_early_param, so could debug it */ 944 insert_resource(&iomem_resource, &code_resource); 945 insert_resource(&iomem_resource, &rodata_resource); 946 insert_resource(&iomem_resource, &data_resource); 947 insert_resource(&iomem_resource, &bss_resource); 948 949 e820_add_kernel_range(); 950 trim_bios_range(); 951 #ifdef CONFIG_X86_32 952 if (ppro_with_ram_bug()) { 953 e820__range_update(0x70000000ULL, 0x40000ULL, E820_TYPE_RAM, 954 E820_TYPE_RESERVED); 955 e820__update_table(e820_table); 956 printk(KERN_INFO "fixed physical RAM map:\n"); 957 e820__print_table("bad_ppro"); 958 } 959 #else 960 early_gart_iommu_check(); 961 #endif 962 963 /* 964 * partially used pages are not usable - thus 965 * we are rounding upwards: 966 */ 967 max_pfn = e820__end_of_ram_pfn(); 968 969 /* update e820 for memory not covered by WB MTRRs */ 970 mtrr_bp_init(); 971 if (mtrr_trim_uncached_memory(max_pfn)) 972 max_pfn = e820__end_of_ram_pfn(); 973 974 max_possible_pfn = max_pfn; 975 976 /* 977 * This call is required when the CPU does not support PAT. If 978 * mtrr_bp_init() invoked it already via pat_init() the call has no 979 * effect. 980 */ 981 init_cache_modes(); 982 983 /* 984 * Define random base addresses for memory sections after max_pfn is 985 * defined and before each memory section base is used. 986 */ 987 kernel_randomize_memory(); 988 989 #ifdef CONFIG_X86_32 990 /* max_low_pfn get updated here */ 991 find_low_pfn_range(); 992 #else 993 check_x2apic(); 994 995 /* How many end-of-memory variables you have, grandma! */ 996 /* need this before calling reserve_initrd */ 997 if (max_pfn > (1UL<<(32 - PAGE_SHIFT))) 998 max_low_pfn = e820__end_of_low_ram_pfn(); 999 else 1000 max_low_pfn = max_pfn; 1001 1002 high_memory = (void *)__va(max_pfn * PAGE_SIZE - 1) + 1; 1003 #endif 1004 1005 /* 1006 * Find and reserve possible boot-time SMP configuration: 1007 */ 1008 find_smp_config(); 1009 1010 early_alloc_pgt_buf(); 1011 1012 /* 1013 * Need to conclude brk, before e820__memblock_setup() 1014 * it could use memblock_find_in_range, could overlap with 1015 * brk area. 1016 */ 1017 reserve_brk(); 1018 1019 cleanup_highmap(); 1020 1021 memblock_set_current_limit(ISA_END_ADDRESS); 1022 e820__memblock_setup(); 1023 1024 /* 1025 * Needs to run after memblock setup because it needs the physical 1026 * memory size. 1027 */ 1028 sev_setup_arch(); 1029 1030 efi_fake_memmap(); 1031 efi_find_mirror(); 1032 efi_esrt_init(); 1033 efi_mokvar_table_init(); 1034 1035 /* 1036 * The EFI specification says that boot service code won't be 1037 * called after ExitBootServices(). This is, in fact, a lie. 1038 */ 1039 efi_reserve_boot_services(); 1040 1041 /* preallocate 4k for mptable mpc */ 1042 e820__memblock_alloc_reserved_mpc_new(); 1043 1044 #ifdef CONFIG_X86_CHECK_BIOS_CORRUPTION 1045 setup_bios_corruption_check(); 1046 #endif 1047 1048 #ifdef CONFIG_X86_32 1049 printk(KERN_DEBUG "initial memory mapped: [mem 0x00000000-%#010lx]\n", 1050 (max_pfn_mapped<<PAGE_SHIFT) - 1); 1051 #endif 1052 1053 /* 1054 * Find free memory for the real mode trampoline and place it there. If 1055 * there is not enough free memory under 1M, on EFI-enabled systems 1056 * there will be additional attempt to reclaim the memory for the real 1057 * mode trampoline at efi_free_boot_services(). 1058 * 1059 * Unconditionally reserve the entire first 1M of RAM because BIOSes 1060 * are known to corrupt low memory and several hundred kilobytes are not 1061 * worth complex detection what memory gets clobbered. Windows does the 1062 * same thing for very similar reasons. 1063 * 1064 * Moreover, on machines with SandyBridge graphics or in setups that use 1065 * crashkernel the entire 1M is reserved anyway. 1066 */ 1067 reserve_real_mode(); 1068 1069 init_mem_mapping(); 1070 1071 idt_setup_early_pf(); 1072 1073 /* 1074 * Update mmu_cr4_features (and, indirectly, trampoline_cr4_features) 1075 * with the current CR4 value. This may not be necessary, but 1076 * auditing all the early-boot CR4 manipulation would be needed to 1077 * rule it out. 1078 * 1079 * Mask off features that don't work outside long mode (just 1080 * PCIDE for now). 1081 */ 1082 mmu_cr4_features = __read_cr4() & ~X86_CR4_PCIDE; 1083 1084 memblock_set_current_limit(get_max_mapped()); 1085 1086 /* 1087 * NOTE: On x86-32, only from this point on, fixmaps are ready for use. 1088 */ 1089 1090 #ifdef CONFIG_PROVIDE_OHCI1394_DMA_INIT 1091 if (init_ohci1394_dma_early) 1092 init_ohci1394_dma_on_all_controllers(); 1093 #endif 1094 /* Allocate bigger log buffer */ 1095 setup_log_buf(1); 1096 1097 if (efi_enabled(EFI_BOOT)) { 1098 switch (boot_params.secure_boot) { 1099 case efi_secureboot_mode_disabled: 1100 pr_info("Secure boot disabled\n"); 1101 break; 1102 case efi_secureboot_mode_enabled: 1103 pr_info("Secure boot enabled\n"); 1104 break; 1105 default: 1106 pr_info("Secure boot could not be determined\n"); 1107 break; 1108 } 1109 } 1110 1111 reserve_initrd(); 1112 1113 acpi_table_upgrade(); 1114 /* Look for ACPI tables and reserve memory occupied by them. */ 1115 acpi_boot_table_init(); 1116 1117 vsmp_init(); 1118 1119 io_delay_init(); 1120 1121 early_platform_quirks(); 1122 1123 early_acpi_boot_init(); 1124 1125 initmem_init(); 1126 dma_contiguous_reserve(max_pfn_mapped << PAGE_SHIFT); 1127 1128 if (boot_cpu_has(X86_FEATURE_GBPAGES)) 1129 hugetlb_cma_reserve(PUD_SHIFT - PAGE_SHIFT); 1130 1131 /* 1132 * Reserve memory for crash kernel after SRAT is parsed so that it 1133 * won't consume hotpluggable memory. 1134 */ 1135 reserve_crashkernel(); 1136 1137 memblock_find_dma_reserve(); 1138 1139 if (!early_xdbc_setup_hardware()) 1140 early_xdbc_register_console(); 1141 1142 x86_init.paging.pagetable_init(); 1143 1144 kasan_init(); 1145 1146 /* 1147 * Sync back kernel address range. 1148 * 1149 * FIXME: Can the later sync in setup_cpu_entry_areas() replace 1150 * this call? 1151 */ 1152 sync_initial_page_table(); 1153 1154 tboot_probe(); 1155 1156 map_vsyscall(); 1157 1158 generic_apic_probe(); 1159 1160 early_quirks(); 1161 1162 /* 1163 * Read APIC and some other early information from ACPI tables. 1164 */ 1165 acpi_boot_init(); 1166 x86_dtb_init(); 1167 1168 /* 1169 * get boot-time SMP configuration: 1170 */ 1171 get_smp_config(); 1172 1173 /* 1174 * Systems w/o ACPI and mptables might not have it mapped the local 1175 * APIC yet, but prefill_possible_map() might need to access it. 1176 */ 1177 init_apic_mappings(); 1178 1179 prefill_possible_map(); 1180 1181 init_cpu_to_node(); 1182 init_gi_nodes(); 1183 1184 io_apic_init_mappings(); 1185 1186 x86_init.hyper.guest_late_init(); 1187 1188 e820__reserve_resources(); 1189 e820__register_nosave_regions(max_pfn); 1190 1191 x86_init.resources.reserve_resources(); 1192 1193 e820__setup_pci_gap(); 1194 1195 #ifdef CONFIG_VT 1196 #if defined(CONFIG_VGA_CONSOLE) 1197 if (!efi_enabled(EFI_BOOT) || (efi_mem_type(0xa0000) != EFI_CONVENTIONAL_MEMORY)) 1198 conswitchp = &vga_con; 1199 #endif 1200 #endif 1201 x86_init.oem.banner(); 1202 1203 x86_init.timers.wallclock_init(); 1204 1205 /* 1206 * This needs to run before setup_local_APIC() which soft-disables the 1207 * local APIC temporarily and that masks the thermal LVT interrupt, 1208 * leading to softlockups on machines which have configured SMI 1209 * interrupt delivery. 1210 */ 1211 therm_lvt_init(); 1212 1213 mcheck_init(); 1214 1215 register_refined_jiffies(CLOCK_TICK_RATE); 1216 1217 #ifdef CONFIG_EFI 1218 if (efi_enabled(EFI_BOOT)) 1219 efi_apply_memmap_quirks(); 1220 #endif 1221 1222 unwind_init(); 1223 } 1224 1225 #ifdef CONFIG_X86_32 1226 1227 static struct resource video_ram_resource = { 1228 .name = "Video RAM area", 1229 .start = 0xa0000, 1230 .end = 0xbffff, 1231 .flags = IORESOURCE_BUSY | IORESOURCE_MEM 1232 }; 1233 1234 void __init i386_reserve_resources(void) 1235 { 1236 request_resource(&iomem_resource, &video_ram_resource); 1237 reserve_standard_io_resources(); 1238 } 1239 1240 #endif /* CONFIG_X86_32 */ 1241 1242 static struct notifier_block kernel_offset_notifier = { 1243 .notifier_call = dump_kernel_offset 1244 }; 1245 1246 static int __init register_kernel_offset_dumper(void) 1247 { 1248 atomic_notifier_chain_register(&panic_notifier_list, 1249 &kernel_offset_notifier); 1250 return 0; 1251 } 1252 __initcall(register_kernel_offset_dumper); 1253