1 /* 2 * Copyright (C) 1995 Linus Torvalds 3 * 4 * Pentium III FXSR, SSE support 5 * Gareth Hughes <gareth@valinux.com>, May 2000 6 */ 7 8 /* 9 * This file handles the architecture-dependent parts of process handling.. 10 */ 11 12 #include <linux/cpu.h> 13 #include <linux/errno.h> 14 #include <linux/sched.h> 15 #include <linux/sched/task.h> 16 #include <linux/sched/task_stack.h> 17 #include <linux/fs.h> 18 #include <linux/kernel.h> 19 #include <linux/mm.h> 20 #include <linux/elfcore.h> 21 #include <linux/smp.h> 22 #include <linux/stddef.h> 23 #include <linux/slab.h> 24 #include <linux/vmalloc.h> 25 #include <linux/user.h> 26 #include <linux/interrupt.h> 27 #include <linux/delay.h> 28 #include <linux/reboot.h> 29 #include <linux/mc146818rtc.h> 30 #include <linux/export.h> 31 #include <linux/kallsyms.h> 32 #include <linux/ptrace.h> 33 #include <linux/personality.h> 34 #include <linux/percpu.h> 35 #include <linux/prctl.h> 36 #include <linux/ftrace.h> 37 #include <linux/uaccess.h> 38 #include <linux/io.h> 39 #include <linux/kdebug.h> 40 #include <linux/syscalls.h> 41 42 #include <asm/pgtable.h> 43 #include <asm/ldt.h> 44 #include <asm/processor.h> 45 #include <asm/fpu/internal.h> 46 #include <asm/desc.h> 47 48 #include <linux/err.h> 49 50 #include <asm/tlbflush.h> 51 #include <asm/cpu.h> 52 #include <asm/syscalls.h> 53 #include <asm/debugreg.h> 54 #include <asm/switch_to.h> 55 #include <asm/vm86.h> 56 #include <asm/resctrl_sched.h> 57 #include <asm/proto.h> 58 59 #include "process.h" 60 61 void __show_regs(struct pt_regs *regs, enum show_regs_mode mode) 62 { 63 unsigned long cr0 = 0L, cr2 = 0L, cr3 = 0L, cr4 = 0L; 64 unsigned long d0, d1, d2, d3, d6, d7; 65 unsigned short gs; 66 67 if (user_mode(regs)) 68 gs = get_user_gs(regs); 69 else 70 savesegment(gs, gs); 71 72 show_ip(regs, KERN_DEFAULT); 73 74 printk(KERN_DEFAULT "EAX: %08lx EBX: %08lx ECX: %08lx EDX: %08lx\n", 75 regs->ax, regs->bx, regs->cx, regs->dx); 76 printk(KERN_DEFAULT "ESI: %08lx EDI: %08lx EBP: %08lx ESP: %08lx\n", 77 regs->si, regs->di, regs->bp, regs->sp); 78 printk(KERN_DEFAULT "DS: %04x ES: %04x FS: %04x GS: %04x SS: %04x EFLAGS: %08lx\n", 79 (u16)regs->ds, (u16)regs->es, (u16)regs->fs, gs, regs->ss, regs->flags); 80 81 if (mode != SHOW_REGS_ALL) 82 return; 83 84 cr0 = read_cr0(); 85 cr2 = read_cr2(); 86 cr3 = __read_cr3(); 87 cr4 = __read_cr4(); 88 printk(KERN_DEFAULT "CR0: %08lx CR2: %08lx CR3: %08lx CR4: %08lx\n", 89 cr0, cr2, cr3, cr4); 90 91 get_debugreg(d0, 0); 92 get_debugreg(d1, 1); 93 get_debugreg(d2, 2); 94 get_debugreg(d3, 3); 95 get_debugreg(d6, 6); 96 get_debugreg(d7, 7); 97 98 /* Only print out debug registers if they are in their non-default state. */ 99 if ((d0 == 0) && (d1 == 0) && (d2 == 0) && (d3 == 0) && 100 (d6 == DR6_RESERVED) && (d7 == 0x400)) 101 return; 102 103 printk(KERN_DEFAULT "DR0: %08lx DR1: %08lx DR2: %08lx DR3: %08lx\n", 104 d0, d1, d2, d3); 105 printk(KERN_DEFAULT "DR6: %08lx DR7: %08lx\n", 106 d6, d7); 107 } 108 109 void release_thread(struct task_struct *dead_task) 110 { 111 BUG_ON(dead_task->mm); 112 release_vm86_irqs(dead_task); 113 } 114 115 void 116 start_thread(struct pt_regs *regs, unsigned long new_ip, unsigned long new_sp) 117 { 118 set_user_gs(regs, 0); 119 regs->fs = 0; 120 regs->ds = __USER_DS; 121 regs->es = __USER_DS; 122 regs->ss = __USER_DS; 123 regs->cs = __USER_CS; 124 regs->ip = new_ip; 125 regs->sp = new_sp; 126 regs->flags = X86_EFLAGS_IF; 127 } 128 EXPORT_SYMBOL_GPL(start_thread); 129 130 131 /* 132 * switch_to(x,y) should switch tasks from x to y. 133 * 134 * We fsave/fwait so that an exception goes off at the right time 135 * (as a call from the fsave or fwait in effect) rather than to 136 * the wrong process. Lazy FP saving no longer makes any sense 137 * with modern CPU's, and this simplifies a lot of things (SMP 138 * and UP become the same). 139 * 140 * NOTE! We used to use the x86 hardware context switching. The 141 * reason for not using it any more becomes apparent when you 142 * try to recover gracefully from saved state that is no longer 143 * valid (stale segment register values in particular). With the 144 * hardware task-switch, there is no way to fix up bad state in 145 * a reasonable manner. 146 * 147 * The fact that Intel documents the hardware task-switching to 148 * be slow is a fairly red herring - this code is not noticeably 149 * faster. However, there _is_ some room for improvement here, 150 * so the performance issues may eventually be a valid point. 151 * More important, however, is the fact that this allows us much 152 * more flexibility. 153 * 154 * The return value (in %ax) will be the "prev" task after 155 * the task-switch, and shows up in ret_from_fork in entry.S, 156 * for example. 157 */ 158 __visible __notrace_funcgraph struct task_struct * 159 __switch_to(struct task_struct *prev_p, struct task_struct *next_p) 160 { 161 struct thread_struct *prev = &prev_p->thread, 162 *next = &next_p->thread; 163 struct fpu *prev_fpu = &prev->fpu; 164 struct fpu *next_fpu = &next->fpu; 165 int cpu = smp_processor_id(); 166 167 /* never put a printk in __switch_to... printk() calls wake_up*() indirectly */ 168 169 if (!test_thread_flag(TIF_NEED_FPU_LOAD)) 170 switch_fpu_prepare(prev_fpu, cpu); 171 172 /* 173 * Save away %gs. No need to save %fs, as it was saved on the 174 * stack on entry. No need to save %es and %ds, as those are 175 * always kernel segments while inside the kernel. Doing this 176 * before setting the new TLS descriptors avoids the situation 177 * where we temporarily have non-reloadable segments in %fs 178 * and %gs. This could be an issue if the NMI handler ever 179 * used %fs or %gs (it does not today), or if the kernel is 180 * running inside of a hypervisor layer. 181 */ 182 lazy_save_gs(prev->gs); 183 184 /* 185 * Load the per-thread Thread-Local Storage descriptor. 186 */ 187 load_TLS(next, cpu); 188 189 switch_to_extra(prev_p, next_p); 190 191 /* 192 * Leave lazy mode, flushing any hypercalls made here. 193 * This must be done before restoring TLS segments so 194 * the GDT and LDT are properly updated. 195 */ 196 arch_end_context_switch(next_p); 197 198 /* 199 * Reload esp0 and cpu_current_top_of_stack. This changes 200 * current_thread_info(). Refresh the SYSENTER configuration in 201 * case prev or next is vm86. 202 */ 203 update_task_stack(next_p); 204 refresh_sysenter_cs(next); 205 this_cpu_write(cpu_current_top_of_stack, 206 (unsigned long)task_stack_page(next_p) + 207 THREAD_SIZE); 208 209 /* 210 * Restore %gs if needed (which is common) 211 */ 212 if (prev->gs | next->gs) 213 lazy_load_gs(next->gs); 214 215 this_cpu_write(current_task, next_p); 216 217 switch_fpu_finish(next_fpu); 218 219 /* Load the Intel cache allocation PQR MSR. */ 220 resctrl_sched_in(); 221 222 return prev_p; 223 } 224 225 SYSCALL_DEFINE2(arch_prctl, int, option, unsigned long, arg2) 226 { 227 return do_arch_prctl_common(current, option, arg2); 228 } 229