1 // SPDX-License-Identifier: GPL-2.0
2 /*
3  * AMD Family 10h mmconfig enablement
4  */
5 
6 #include <linux/types.h>
7 #include <linux/mm.h>
8 #include <linux/string.h>
9 #include <linux/pci.h>
10 #include <linux/dmi.h>
11 #include <linux/range.h>
12 
13 #include <asm/pci-direct.h>
14 #include <linux/sort.h>
15 #include <asm/io.h>
16 #include <asm/msr.h>
17 #include <asm/acpi.h>
18 #include <asm/mmconfig.h>
19 #include <asm/pci_x86.h>
20 
21 struct pci_hostbridge_probe {
22 	u32 bus;
23 	u32 slot;
24 	u32 vendor;
25 	u32 device;
26 };
27 
28 static u64 fam10h_pci_mmconf_base;
29 
30 static struct pci_hostbridge_probe pci_probes[] = {
31 	{ 0, 0x18, PCI_VENDOR_ID_AMD, 0x1200 },
32 	{ 0xff, 0, PCI_VENDOR_ID_AMD, 0x1200 },
33 };
34 
35 static int cmp_range(const void *x1, const void *x2)
36 {
37 	const struct range *r1 = x1;
38 	const struct range *r2 = x2;
39 	int start1, start2;
40 
41 	start1 = r1->start >> 32;
42 	start2 = r2->start >> 32;
43 
44 	return start1 - start2;
45 }
46 
47 #define MMCONF_UNIT (1ULL << FAM10H_MMIO_CONF_BASE_SHIFT)
48 #define MMCONF_MASK (~(MMCONF_UNIT - 1))
49 #define MMCONF_SIZE (MMCONF_UNIT << 8)
50 /* need to avoid (0xfd<<32), (0xfe<<32), and (0xff<<32), ht used space */
51 #define FAM10H_PCI_MMCONF_BASE (0xfcULL<<32)
52 #define BASE_VALID(b) ((b) + MMCONF_SIZE <= (0xfdULL<<32) || (b) >= (1ULL<<40))
53 static void get_fam10h_pci_mmconf_base(void)
54 {
55 	int i;
56 	unsigned bus;
57 	unsigned slot;
58 	int found;
59 
60 	u64 val;
61 	u32 address;
62 	u64 tom2;
63 	u64 base = FAM10H_PCI_MMCONF_BASE;
64 
65 	int hi_mmio_num;
66 	struct range range[8];
67 
68 	/* only try to get setting from BSP */
69 	if (fam10h_pci_mmconf_base)
70 		return;
71 
72 	if (!early_pci_allowed())
73 		return;
74 
75 	found = 0;
76 	for (i = 0; i < ARRAY_SIZE(pci_probes); i++) {
77 		u32 id;
78 		u16 device;
79 		u16 vendor;
80 
81 		bus = pci_probes[i].bus;
82 		slot = pci_probes[i].slot;
83 		id = read_pci_config(bus, slot, 0, PCI_VENDOR_ID);
84 
85 		vendor = id & 0xffff;
86 		device = (id>>16) & 0xffff;
87 		if (pci_probes[i].vendor == vendor &&
88 		    pci_probes[i].device == device) {
89 			found = 1;
90 			break;
91 		}
92 	}
93 
94 	if (!found)
95 		return;
96 
97 	/* SYS_CFG */
98 	address = MSR_K8_SYSCFG;
99 	rdmsrl(address, val);
100 
101 	/* TOP_MEM2 is not enabled? */
102 	if (!(val & (1<<21))) {
103 		tom2 = 1ULL << 32;
104 	} else {
105 		/* TOP_MEM2 */
106 		address = MSR_K8_TOP_MEM2;
107 		rdmsrl(address, val);
108 		tom2 = max(val & 0xffffff800000ULL, 1ULL << 32);
109 	}
110 
111 	if (base <= tom2)
112 		base = (tom2 + 2 * MMCONF_UNIT - 1) & MMCONF_MASK;
113 
114 	/*
115 	 * need to check if the range is in the high mmio range that is
116 	 * above 4G
117 	 */
118 	hi_mmio_num = 0;
119 	for (i = 0; i < 8; i++) {
120 		u32 reg;
121 		u64 start;
122 		u64 end;
123 		reg = read_pci_config(bus, slot, 1, 0x80 + (i << 3));
124 		if (!(reg & 3))
125 			continue;
126 
127 		start = (u64)(reg & 0xffffff00) << 8; /* 39:16 on 31:8*/
128 		reg = read_pci_config(bus, slot, 1, 0x84 + (i << 3));
129 		end = ((u64)(reg & 0xffffff00) << 8) | 0xffff; /* 39:16 on 31:8*/
130 
131 		if (end < tom2)
132 			continue;
133 
134 		range[hi_mmio_num].start = start;
135 		range[hi_mmio_num].end = end;
136 		hi_mmio_num++;
137 	}
138 
139 	if (!hi_mmio_num)
140 		goto out;
141 
142 	/* sort the range */
143 	sort(range, hi_mmio_num, sizeof(struct range), cmp_range, NULL);
144 
145 	if (range[hi_mmio_num - 1].end < base)
146 		goto out;
147 	if (range[0].start > base + MMCONF_SIZE)
148 		goto out;
149 
150 	/* need to find one window */
151 	base = (range[0].start & MMCONF_MASK) - MMCONF_UNIT;
152 	if ((base > tom2) && BASE_VALID(base))
153 		goto out;
154 	base = (range[hi_mmio_num - 1].end + MMCONF_UNIT) & MMCONF_MASK;
155 	if (BASE_VALID(base))
156 		goto out;
157 	/* need to find window between ranges */
158 	for (i = 1; i < hi_mmio_num; i++) {
159 		base = (range[i - 1].end + MMCONF_UNIT) & MMCONF_MASK;
160 		val = range[i].start & MMCONF_MASK;
161 		if (val >= base + MMCONF_SIZE && BASE_VALID(base))
162 			goto out;
163 	}
164 	return;
165 
166 out:
167 	fam10h_pci_mmconf_base = base;
168 }
169 
170 void fam10h_check_enable_mmcfg(void)
171 {
172 	u64 val;
173 	u32 address;
174 
175 	if (!(pci_probe & PCI_CHECK_ENABLE_AMD_MMCONF))
176 		return;
177 
178 	address = MSR_FAM10H_MMIO_CONF_BASE;
179 	rdmsrl(address, val);
180 
181 	/* try to make sure that AP's setting is identical to BSP setting */
182 	if (val & FAM10H_MMIO_CONF_ENABLE) {
183 		unsigned busnbits;
184 		busnbits = (val >> FAM10H_MMIO_CONF_BUSRANGE_SHIFT) &
185 			FAM10H_MMIO_CONF_BUSRANGE_MASK;
186 
187 		/* only trust the one handle 256 buses, if acpi=off */
188 		if (!acpi_pci_disabled || busnbits >= 8) {
189 			u64 base = val & MMCONF_MASK;
190 
191 			if (!fam10h_pci_mmconf_base) {
192 				fam10h_pci_mmconf_base = base;
193 				return;
194 			} else if (fam10h_pci_mmconf_base ==  base)
195 				return;
196 		}
197 	}
198 
199 	/*
200 	 * if it is not enabled, try to enable it and assume only one segment
201 	 * with 256 buses
202 	 */
203 	get_fam10h_pci_mmconf_base();
204 	if (!fam10h_pci_mmconf_base) {
205 		pci_probe &= ~PCI_CHECK_ENABLE_AMD_MMCONF;
206 		return;
207 	}
208 
209 	printk(KERN_INFO "Enable MMCONFIG on AMD Family 10h\n");
210 	val &= ~((FAM10H_MMIO_CONF_BASE_MASK<<FAM10H_MMIO_CONF_BASE_SHIFT) |
211 	     (FAM10H_MMIO_CONF_BUSRANGE_MASK<<FAM10H_MMIO_CONF_BUSRANGE_SHIFT));
212 	val |= fam10h_pci_mmconf_base | (8 << FAM10H_MMIO_CONF_BUSRANGE_SHIFT) |
213 	       FAM10H_MMIO_CONF_ENABLE;
214 	wrmsrl(address, val);
215 }
216 
217 static int __init set_check_enable_amd_mmconf(const struct dmi_system_id *d)
218 {
219         pci_probe |= PCI_CHECK_ENABLE_AMD_MMCONF;
220         return 0;
221 }
222 
223 static const struct dmi_system_id __initconst mmconf_dmi_table[] = {
224         {
225                 .callback = set_check_enable_amd_mmconf,
226                 .ident = "Sun Microsystems Machine",
227                 .matches = {
228                         DMI_MATCH(DMI_SYS_VENDOR, "Sun Microsystems"),
229                 },
230         },
231 	{}
232 };
233 
234 /* Called from a non __init function, but only on the BSP. */
235 void __ref check_enable_amd_mmconf_dmi(void)
236 {
237 	dmi_check_system(mmconf_dmi_table);
238 }
239