1 // SPDX-License-Identifier: GPL-2.0 2 /* 3 * Jailhouse paravirt_ops implementation 4 * 5 * Copyright (c) Siemens AG, 2015-2017 6 * 7 * Authors: 8 * Jan Kiszka <jan.kiszka@siemens.com> 9 */ 10 11 #include <linux/acpi_pmtmr.h> 12 #include <linux/kernel.h> 13 #include <linux/reboot.h> 14 #include <asm/apic.h> 15 #include <asm/cpu.h> 16 #include <asm/hypervisor.h> 17 #include <asm/i8259.h> 18 #include <asm/irqdomain.h> 19 #include <asm/pci_x86.h> 20 #include <asm/reboot.h> 21 #include <asm/setup.h> 22 23 static __initdata struct jailhouse_setup_data setup_data; 24 static unsigned int precalibrated_tsc_khz; 25 26 static uint32_t jailhouse_cpuid_base(void) 27 { 28 if (boot_cpu_data.cpuid_level < 0 || 29 !boot_cpu_has(X86_FEATURE_HYPERVISOR)) 30 return 0; 31 32 return hypervisor_cpuid_base("Jailhouse\0\0\0", 0); 33 } 34 35 static uint32_t __init jailhouse_detect(void) 36 { 37 return jailhouse_cpuid_base(); 38 } 39 40 static void jailhouse_get_wallclock(struct timespec *now) 41 { 42 memset(now, 0, sizeof(*now)); 43 } 44 45 static void __init jailhouse_timer_init(void) 46 { 47 lapic_timer_frequency = setup_data.apic_khz * (1000 / HZ); 48 } 49 50 static unsigned long jailhouse_get_tsc(void) 51 { 52 return precalibrated_tsc_khz; 53 } 54 55 static void __init jailhouse_x2apic_init(void) 56 { 57 #ifdef CONFIG_X86_X2APIC 58 if (!x2apic_enabled()) 59 return; 60 /* 61 * We do not have access to IR inside Jailhouse non-root cells. So 62 * we have to run in physical mode. 63 */ 64 x2apic_phys = 1; 65 /* 66 * This will trigger the switch to apic_x2apic_phys. Empty OEM IDs 67 * ensure that only this APIC driver picks up the call. 68 */ 69 default_acpi_madt_oem_check("", ""); 70 #endif 71 } 72 73 static void __init jailhouse_get_smp_config(unsigned int early) 74 { 75 struct ioapic_domain_cfg ioapic_cfg = { 76 .type = IOAPIC_DOMAIN_STRICT, 77 .ops = &mp_ioapic_irqdomain_ops, 78 }; 79 struct mpc_intsrc mp_irq = { 80 .type = MP_INTSRC, 81 .irqtype = mp_INT, 82 .irqflag = MP_IRQPOL_ACTIVE_HIGH | MP_IRQTRIG_EDGE, 83 }; 84 unsigned int cpu; 85 86 jailhouse_x2apic_init(); 87 88 register_lapic_address(0xfee00000); 89 90 for (cpu = 0; cpu < setup_data.num_cpus; cpu++) { 91 generic_processor_info(setup_data.cpu_ids[cpu], 92 boot_cpu_apic_version); 93 } 94 95 smp_found_config = 1; 96 97 if (setup_data.standard_ioapic) { 98 mp_register_ioapic(0, 0xfec00000, gsi_top, &ioapic_cfg); 99 100 /* Register 1:1 mapping for legacy UART IRQs 3 and 4 */ 101 mp_irq.srcbusirq = mp_irq.dstirq = 3; 102 mp_save_irq(&mp_irq); 103 104 mp_irq.srcbusirq = mp_irq.dstirq = 4; 105 mp_save_irq(&mp_irq); 106 } 107 } 108 109 static void jailhouse_no_restart(void) 110 { 111 pr_notice("Jailhouse: Restart not supported, halting\n"); 112 machine_halt(); 113 } 114 115 static int __init jailhouse_pci_arch_init(void) 116 { 117 pci_direct_init(1); 118 119 /* 120 * There are no bridges on the virtual PCI root bus under Jailhouse, 121 * thus no other way to discover all devices than a full scan. 122 * Respect any overrides via the command line, though. 123 */ 124 if (pcibios_last_bus < 0) 125 pcibios_last_bus = 0xff; 126 127 #ifdef CONFIG_PCI_MMCONFIG 128 if (setup_data.pci_mmconfig_base) { 129 pci_mmconfig_add(0, 0, pcibios_last_bus, 130 setup_data.pci_mmconfig_base); 131 pci_mmcfg_arch_init(); 132 } 133 #endif 134 135 return 0; 136 } 137 138 static void __init jailhouse_init_platform(void) 139 { 140 u64 pa_data = boot_params.hdr.setup_data; 141 struct setup_data header; 142 void *mapping; 143 144 x86_init.irqs.pre_vector_init = x86_init_noop; 145 x86_init.timers.timer_init = jailhouse_timer_init; 146 x86_init.mpparse.get_smp_config = jailhouse_get_smp_config; 147 x86_init.pci.arch_init = jailhouse_pci_arch_init; 148 149 x86_platform.calibrate_cpu = jailhouse_get_tsc; 150 x86_platform.calibrate_tsc = jailhouse_get_tsc; 151 x86_platform.get_wallclock = jailhouse_get_wallclock; 152 x86_platform.legacy.rtc = 0; 153 x86_platform.legacy.warm_reset = 0; 154 x86_platform.legacy.i8042 = X86_LEGACY_I8042_PLATFORM_ABSENT; 155 156 legacy_pic = &null_legacy_pic; 157 158 machine_ops.emergency_restart = jailhouse_no_restart; 159 160 while (pa_data) { 161 mapping = early_memremap(pa_data, sizeof(header)); 162 memcpy(&header, mapping, sizeof(header)); 163 early_memunmap(mapping, sizeof(header)); 164 165 if (header.type == SETUP_JAILHOUSE && 166 header.len >= sizeof(setup_data)) { 167 pa_data += offsetof(struct setup_data, data); 168 169 mapping = early_memremap(pa_data, sizeof(setup_data)); 170 memcpy(&setup_data, mapping, sizeof(setup_data)); 171 early_memunmap(mapping, sizeof(setup_data)); 172 173 break; 174 } 175 176 pa_data = header.next; 177 } 178 179 if (!pa_data) 180 panic("Jailhouse: No valid setup data found"); 181 182 if (setup_data.compatible_version > JAILHOUSE_SETUP_REQUIRED_VERSION) 183 panic("Jailhouse: Unsupported setup data structure"); 184 185 pmtmr_ioport = setup_data.pm_timer_address; 186 pr_debug("Jailhouse: PM-Timer IO Port: %#x\n", pmtmr_ioport); 187 188 precalibrated_tsc_khz = setup_data.tsc_khz; 189 setup_force_cpu_cap(X86_FEATURE_TSC_KNOWN_FREQ); 190 191 pci_probe = 0; 192 193 /* 194 * Avoid that the kernel complains about missing ACPI tables - there 195 * are none in a non-root cell. 196 */ 197 disable_acpi(); 198 } 199 200 bool jailhouse_paravirt(void) 201 { 202 return jailhouse_cpuid_base() != 0; 203 } 204 205 static bool jailhouse_x2apic_available(void) 206 { 207 /* 208 * The x2APIC is only available if the root cell enabled it. Jailhouse 209 * does not support switching between xAPIC and x2APIC. 210 */ 211 return x2apic_enabled(); 212 } 213 214 const struct hypervisor_x86 x86_hyper_jailhouse __refconst = { 215 .name = "Jailhouse", 216 .detect = jailhouse_detect, 217 .init.init_platform = jailhouse_init_platform, 218 .init.x2apic_available = jailhouse_x2apic_available, 219 }; 220