1 // SPDX-License-Identifier: GPL-2.0 2 #include <linux/linkage.h> 3 #include <linux/errno.h> 4 #include <linux/signal.h> 5 #include <linux/sched.h> 6 #include <linux/ioport.h> 7 #include <linux/interrupt.h> 8 #include <linux/timex.h> 9 #include <linux/random.h> 10 #include <linux/kprobes.h> 11 #include <linux/init.h> 12 #include <linux/kernel_stat.h> 13 #include <linux/device.h> 14 #include <linux/bitops.h> 15 #include <linux/acpi.h> 16 #include <linux/io.h> 17 #include <linux/delay.h> 18 19 #include <linux/atomic.h> 20 #include <asm/timer.h> 21 #include <asm/hw_irq.h> 22 #include <asm/pgtable.h> 23 #include <asm/desc.h> 24 #include <asm/apic.h> 25 #include <asm/setup.h> 26 #include <asm/i8259.h> 27 #include <asm/traps.h> 28 #include <asm/prom.h> 29 30 /* 31 * ISA PIC or low IO-APIC triggered (INTA-cycle or APIC) interrupts: 32 * (these are usually mapped to vectors 0x30-0x3f) 33 */ 34 35 /* 36 * The IO-APIC gives us many more interrupt sources. Most of these 37 * are unused but an SMP system is supposed to have enough memory ... 38 * sometimes (mostly wrt. hw bugs) we get corrupted vectors all 39 * across the spectrum, so we really want to be prepared to get all 40 * of these. Plus, more powerful systems might have more than 64 41 * IO-APIC registers. 42 * 43 * (these are usually mapped into the 0x30-0xff vector range) 44 */ 45 46 /* 47 * IRQ2 is cascade interrupt to second interrupt controller 48 */ 49 static struct irqaction irq2 = { 50 .handler = no_action, 51 .name = "cascade", 52 .flags = IRQF_NO_THREAD, 53 }; 54 55 DEFINE_PER_CPU(vector_irq_t, vector_irq) = { 56 [0 ... NR_VECTORS - 1] = VECTOR_UNUSED, 57 }; 58 59 void __init init_ISA_irqs(void) 60 { 61 struct irq_chip *chip = legacy_pic->chip; 62 int i; 63 64 legacy_pic->init(0); 65 66 for (i = 0; i < nr_legacy_irqs(); i++) 67 irq_set_chip_and_handler(i, chip, handle_level_irq); 68 } 69 70 void __init init_IRQ(void) 71 { 72 int i; 73 74 /* 75 * On cpu 0, Assign ISA_IRQ_VECTOR(irq) to IRQ 0..15. 76 * If these IRQ's are handled by legacy interrupt-controllers like PIC, 77 * then this configuration will likely be static after the boot. If 78 * these IRQ's are handled by more mordern controllers like IO-APIC, 79 * then this vector space can be freed and re-used dynamically as the 80 * irq's migrate etc. 81 */ 82 for (i = 0; i < nr_legacy_irqs(); i++) 83 per_cpu(vector_irq, 0)[ISA_IRQ_VECTOR(i)] = irq_to_desc(i); 84 85 x86_init.irqs.intr_init(); 86 } 87 88 void __init native_init_IRQ(void) 89 { 90 /* Execute any quirks before the call gates are initialised: */ 91 x86_init.irqs.pre_vector_init(); 92 93 idt_setup_apic_and_irq_gates(); 94 lapic_assign_system_vectors(); 95 96 if (!acpi_ioapic && !of_ioapic && nr_legacy_irqs()) 97 setup_irq(2, &irq2); 98 99 irq_ctx_init(smp_processor_id()); 100 } 101