xref: /openbmc/linux/arch/x86/kernel/idt.c (revision d7b31359)
1 /*
2  * Interrupt descriptor table related code
3  *
4  * This file is licensed under the GPL V2
5  */
6 #include <linux/interrupt.h>
7 
8 #include <asm/traps.h>
9 #include <asm/proto.h>
10 #include <asm/desc.h>
11 #include <asm/hw_irq.h>
12 
13 struct idt_data {
14 	unsigned int	vector;
15 	unsigned int	segment;
16 	struct idt_bits	bits;
17 	const void	*addr;
18 };
19 
20 #define DPL0		0x0
21 #define DPL3		0x3
22 
23 #define DEFAULT_STACK	0
24 
25 #define G(_vector, _addr, _ist, _type, _dpl, _segment)	\
26 	{						\
27 		.vector		= _vector,		\
28 		.bits.ist	= _ist,			\
29 		.bits.type	= _type,		\
30 		.bits.dpl	= _dpl,			\
31 		.bits.p		= 1,			\
32 		.addr		= _addr,		\
33 		.segment	= _segment,		\
34 	}
35 
36 /* Interrupt gate */
37 #define INTG(_vector, _addr)				\
38 	G(_vector, _addr, DEFAULT_STACK, GATE_INTERRUPT, DPL0, __KERNEL_CS)
39 
40 /* System interrupt gate */
41 #define SYSG(_vector, _addr)				\
42 	G(_vector, _addr, DEFAULT_STACK, GATE_INTERRUPT, DPL3, __KERNEL_CS)
43 
44 /* Interrupt gate with interrupt stack */
45 #define ISTG(_vector, _addr, _ist)			\
46 	G(_vector, _addr, _ist, GATE_INTERRUPT, DPL0, __KERNEL_CS)
47 
48 /* System interrupt gate with interrupt stack */
49 #define SISTG(_vector, _addr, _ist)			\
50 	G(_vector, _addr, _ist, GATE_INTERRUPT, DPL3, __KERNEL_CS)
51 
52 /* Task gate */
53 #define TSKG(_vector, _gdt)				\
54 	G(_vector, NULL, DEFAULT_STACK, GATE_TASK, DPL0, _gdt << 3)
55 
56 /*
57  * Early traps running on the DEFAULT_STACK because the other interrupt
58  * stacks work only after cpu_init().
59  */
60 static const __initconst struct idt_data early_idts[] = {
61 	INTG(X86_TRAP_DB,		debug),
62 	SYSG(X86_TRAP_BP,		int3),
63 #ifdef CONFIG_X86_32
64 	INTG(X86_TRAP_PF,		page_fault),
65 #endif
66 };
67 
68 /*
69  * The default IDT entries which are set up in trap_init() before
70  * cpu_init() is invoked. Interrupt stacks cannot be used at that point and
71  * the traps which use them are reinitialized with IST after cpu_init() has
72  * set up TSS.
73  */
74 static const __initconst struct idt_data def_idts[] = {
75 	INTG(X86_TRAP_DE,		divide_error),
76 	INTG(X86_TRAP_NMI,		nmi),
77 	INTG(X86_TRAP_BR,		bounds),
78 	INTG(X86_TRAP_UD,		invalid_op),
79 	INTG(X86_TRAP_NM,		device_not_available),
80 	INTG(X86_TRAP_OLD_MF,		coprocessor_segment_overrun),
81 	INTG(X86_TRAP_TS,		invalid_TSS),
82 	INTG(X86_TRAP_NP,		segment_not_present),
83 	INTG(X86_TRAP_SS,		stack_segment),
84 	INTG(X86_TRAP_GP,		general_protection),
85 	INTG(X86_TRAP_SPURIOUS,		spurious_interrupt_bug),
86 	INTG(X86_TRAP_MF,		coprocessor_error),
87 	INTG(X86_TRAP_AC,		alignment_check),
88 	INTG(X86_TRAP_XF,		simd_coprocessor_error),
89 
90 #ifdef CONFIG_X86_32
91 	TSKG(X86_TRAP_DF,		GDT_ENTRY_DOUBLEFAULT_TSS),
92 #else
93 	INTG(X86_TRAP_DF,		double_fault),
94 #endif
95 	INTG(X86_TRAP_DB,		debug),
96 
97 #ifdef CONFIG_X86_MCE
98 	INTG(X86_TRAP_MC,		&machine_check),
99 #endif
100 
101 	SYSG(X86_TRAP_OF,		overflow),
102 #if defined(CONFIG_IA32_EMULATION)
103 	SYSG(IA32_SYSCALL_VECTOR,	entry_INT80_compat),
104 #elif defined(CONFIG_X86_32)
105 	SYSG(IA32_SYSCALL_VECTOR,	entry_INT80_32),
106 #endif
107 };
108 
109 /*
110  * The APIC and SMP idt entries
111  */
112 static const __initconst struct idt_data apic_idts[] = {
113 #ifdef CONFIG_SMP
114 	INTG(RESCHEDULE_VECTOR,		reschedule_interrupt),
115 	INTG(CALL_FUNCTION_VECTOR,	call_function_interrupt),
116 	INTG(CALL_FUNCTION_SINGLE_VECTOR, call_function_single_interrupt),
117 	INTG(IRQ_MOVE_CLEANUP_VECTOR,	irq_move_cleanup_interrupt),
118 	INTG(REBOOT_VECTOR,		reboot_interrupt),
119 #endif
120 
121 #ifdef CONFIG_X86_THERMAL_VECTOR
122 	INTG(THERMAL_APIC_VECTOR,	thermal_interrupt),
123 #endif
124 
125 #ifdef CONFIG_X86_MCE_THRESHOLD
126 	INTG(THRESHOLD_APIC_VECTOR,	threshold_interrupt),
127 #endif
128 
129 #ifdef CONFIG_X86_MCE_AMD
130 	INTG(DEFERRED_ERROR_VECTOR,	deferred_error_interrupt),
131 #endif
132 
133 #ifdef CONFIG_X86_LOCAL_APIC
134 	INTG(LOCAL_TIMER_VECTOR,	apic_timer_interrupt),
135 	INTG(X86_PLATFORM_IPI_VECTOR,	x86_platform_ipi),
136 # ifdef CONFIG_HAVE_KVM
137 	INTG(POSTED_INTR_VECTOR,	kvm_posted_intr_ipi),
138 	INTG(POSTED_INTR_WAKEUP_VECTOR, kvm_posted_intr_wakeup_ipi),
139 	INTG(POSTED_INTR_NESTED_VECTOR, kvm_posted_intr_nested_ipi),
140 # endif
141 # ifdef CONFIG_IRQ_WORK
142 	INTG(IRQ_WORK_VECTOR,		irq_work_interrupt),
143 # endif
144 #ifdef CONFIG_X86_UV
145 	INTG(UV_BAU_MESSAGE,		uv_bau_message_intr1),
146 #endif
147 	INTG(SPURIOUS_APIC_VECTOR,	spurious_interrupt),
148 	INTG(ERROR_APIC_VECTOR,		error_interrupt),
149 #endif
150 };
151 
152 #ifdef CONFIG_X86_64
153 /*
154  * Early traps running on the DEFAULT_STACK because the other interrupt
155  * stacks work only after cpu_init().
156  */
157 static const __initconst struct idt_data early_pf_idts[] = {
158 	INTG(X86_TRAP_PF,		page_fault),
159 };
160 
161 /*
162  * Override for the debug_idt. Same as the default, but with interrupt
163  * stack set to DEFAULT_STACK (0). Required for NMI trap handling.
164  */
165 static const __initconst struct idt_data dbg_idts[] = {
166 	INTG(X86_TRAP_DB,	debug),
167 };
168 #endif
169 
170 /* Must be page-aligned because the real IDT is used in a fixmap. */
171 gate_desc idt_table[IDT_ENTRIES] __page_aligned_bss;
172 
173 struct desc_ptr idt_descr __ro_after_init = {
174 	.size		= (IDT_ENTRIES * 2 * sizeof(unsigned long)) - 1,
175 	.address	= (unsigned long) idt_table,
176 };
177 
178 #ifdef CONFIG_X86_64
179 /* No need to be aligned, but done to keep all IDTs defined the same way. */
180 gate_desc debug_idt_table[IDT_ENTRIES] __page_aligned_bss;
181 
182 /*
183  * The exceptions which use Interrupt stacks. They are setup after
184  * cpu_init() when the TSS has been initialized.
185  */
186 static const __initconst struct idt_data ist_idts[] = {
187 	ISTG(X86_TRAP_DB,	debug,		DEBUG_STACK),
188 	ISTG(X86_TRAP_NMI,	nmi,		NMI_STACK),
189 	ISTG(X86_TRAP_DF,	double_fault,	DOUBLEFAULT_STACK),
190 #ifdef CONFIG_X86_MCE
191 	ISTG(X86_TRAP_MC,	&machine_check,	MCE_STACK),
192 #endif
193 };
194 
195 /*
196  * Override for the debug_idt. Same as the default, but with interrupt
197  * stack set to DEFAULT_STACK (0). Required for NMI trap handling.
198  */
199 const struct desc_ptr debug_idt_descr = {
200 	.size		= IDT_ENTRIES * 16 - 1,
201 	.address	= (unsigned long) debug_idt_table,
202 };
203 #endif
204 
205 static inline void idt_init_desc(gate_desc *gate, const struct idt_data *d)
206 {
207 	unsigned long addr = (unsigned long) d->addr;
208 
209 	gate->offset_low	= (u16) addr;
210 	gate->segment		= (u16) d->segment;
211 	gate->bits		= d->bits;
212 	gate->offset_middle	= (u16) (addr >> 16);
213 #ifdef CONFIG_X86_64
214 	gate->offset_high	= (u32) (addr >> 32);
215 	gate->reserved		= 0;
216 #endif
217 }
218 
219 static void
220 idt_setup_from_table(gate_desc *idt, const struct idt_data *t, int size, bool sys)
221 {
222 	gate_desc desc;
223 
224 	for (; size > 0; t++, size--) {
225 		idt_init_desc(&desc, t);
226 		write_idt_entry(idt, t->vector, &desc);
227 		if (sys)
228 			set_bit(t->vector, system_vectors);
229 	}
230 }
231 
232 static void set_intr_gate(unsigned int n, const void *addr)
233 {
234 	struct idt_data data;
235 
236 	BUG_ON(n > 0xFF);
237 
238 	memset(&data, 0, sizeof(data));
239 	data.vector	= n;
240 	data.addr	= addr;
241 	data.segment	= __KERNEL_CS;
242 	data.bits.type	= GATE_INTERRUPT;
243 	data.bits.p	= 1;
244 
245 	idt_setup_from_table(idt_table, &data, 1, false);
246 }
247 
248 /**
249  * idt_setup_early_traps - Initialize the idt table with early traps
250  *
251  * On X8664 these traps do not use interrupt stacks as they can't work
252  * before cpu_init() is invoked and sets up TSS. The IST variants are
253  * installed after that.
254  */
255 void __init idt_setup_early_traps(void)
256 {
257 	idt_setup_from_table(idt_table, early_idts, ARRAY_SIZE(early_idts),
258 			     true);
259 	load_idt(&idt_descr);
260 }
261 
262 /**
263  * idt_setup_traps - Initialize the idt table with default traps
264  */
265 void __init idt_setup_traps(void)
266 {
267 	idt_setup_from_table(idt_table, def_idts, ARRAY_SIZE(def_idts), true);
268 }
269 
270 #ifdef CONFIG_X86_64
271 /**
272  * idt_setup_early_pf - Initialize the idt table with early pagefault handler
273  *
274  * On X8664 this does not use interrupt stacks as they can't work before
275  * cpu_init() is invoked and sets up TSS. The IST variant is installed
276  * after that.
277  *
278  * FIXME: Why is 32bit and 64bit installing the PF handler at different
279  * places in the early setup code?
280  */
281 void __init idt_setup_early_pf(void)
282 {
283 	idt_setup_from_table(idt_table, early_pf_idts,
284 			     ARRAY_SIZE(early_pf_idts), true);
285 }
286 
287 /**
288  * idt_setup_ist_traps - Initialize the idt table with traps using IST
289  */
290 void __init idt_setup_ist_traps(void)
291 {
292 	idt_setup_from_table(idt_table, ist_idts, ARRAY_SIZE(ist_idts), true);
293 }
294 
295 /**
296  * idt_setup_debugidt_traps - Initialize the debug idt table with debug traps
297  */
298 void __init idt_setup_debugidt_traps(void)
299 {
300 	memcpy(&debug_idt_table, &idt_table, IDT_ENTRIES * 16);
301 
302 	idt_setup_from_table(debug_idt_table, dbg_idts, ARRAY_SIZE(dbg_idts), false);
303 }
304 #endif
305 
306 /**
307  * idt_setup_apic_and_irq_gates - Setup APIC/SMP and normal interrupt gates
308  */
309 void __init idt_setup_apic_and_irq_gates(void)
310 {
311 	int i = FIRST_EXTERNAL_VECTOR;
312 	void *entry;
313 
314 	idt_setup_from_table(idt_table, apic_idts, ARRAY_SIZE(apic_idts), true);
315 
316 	for_each_clear_bit_from(i, system_vectors, FIRST_SYSTEM_VECTOR) {
317 		entry = irq_entries_start + 8 * (i - FIRST_EXTERNAL_VECTOR);
318 		set_intr_gate(i, entry);
319 	}
320 
321 #ifdef CONFIG_X86_LOCAL_APIC
322 	for_each_clear_bit_from(i, system_vectors, NR_VECTORS) {
323 		set_bit(i, system_vectors);
324 		set_intr_gate(i, spurious_interrupt);
325 	}
326 #endif
327 }
328 
329 /**
330  * idt_setup_early_handler - Initializes the idt table with early handlers
331  */
332 void __init idt_setup_early_handler(void)
333 {
334 	int i;
335 
336 	for (i = 0; i < NUM_EXCEPTION_VECTORS; i++)
337 		set_intr_gate(i, early_idt_handler_array[i]);
338 #ifdef CONFIG_X86_32
339 	for ( ; i < NR_VECTORS; i++)
340 		set_intr_gate(i, early_ignore_irq);
341 #endif
342 	load_idt(&idt_descr);
343 }
344 
345 /**
346  * idt_invalidate - Invalidate interrupt descriptor table
347  * @addr:	The virtual address of the 'invalid' IDT
348  */
349 void idt_invalidate(void *addr)
350 {
351 	struct desc_ptr idt = { .address = (unsigned long) addr, .size = 0 };
352 
353 	load_idt(&idt);
354 }
355 
356 void __init update_intr_gate(unsigned int n, const void *addr)
357 {
358 	if (WARN_ON_ONCE(!test_bit(n, system_vectors)))
359 		return;
360 	set_intr_gate(n, addr);
361 }
362 
363 void alloc_intr_gate(unsigned int n, const void *addr)
364 {
365 	BUG_ON(n < FIRST_SYSTEM_VECTOR);
366 	if (!test_and_set_bit(n, system_vectors))
367 		set_intr_gate(n, addr);
368 }
369