xref: /openbmc/linux/arch/x86/kernel/idt.c (revision bb3982b4)
1 /*
2  * Interrupt descriptor table related code
3  *
4  * This file is licensed under the GPL V2
5  */
6 #include <linux/interrupt.h>
7 
8 #include <asm/traps.h>
9 #include <asm/proto.h>
10 #include <asm/desc.h>
11 #include <asm/hw_irq.h>
12 
13 struct idt_data {
14 	unsigned int	vector;
15 	unsigned int	segment;
16 	struct idt_bits	bits;
17 	const void	*addr;
18 };
19 
20 #define DPL0		0x0
21 #define DPL3		0x3
22 
23 #define DEFAULT_STACK	0
24 
25 #define G(_vector, _addr, _ist, _type, _dpl, _segment)	\
26 	{						\
27 		.vector		= _vector,		\
28 		.bits.ist	= _ist,			\
29 		.bits.type	= _type,		\
30 		.bits.dpl	= _dpl,			\
31 		.bits.p		= 1,			\
32 		.addr		= _addr,		\
33 		.segment	= _segment,		\
34 	}
35 
36 /* Interrupt gate */
37 #define INTG(_vector, _addr)				\
38 	G(_vector, _addr, DEFAULT_STACK, GATE_INTERRUPT, DPL0, __KERNEL_CS)
39 
40 /* System interrupt gate */
41 #define SYSG(_vector, _addr)				\
42 	G(_vector, _addr, DEFAULT_STACK, GATE_INTERRUPT, DPL3, __KERNEL_CS)
43 
44 /*
45  * Interrupt gate with interrupt stack. The _ist index is the index in
46  * the tss.ist[] array, but for the descriptor it needs to start at 1.
47  */
48 #define ISTG(_vector, _addr, _ist)			\
49 	G(_vector, _addr, _ist + 1, GATE_INTERRUPT, DPL0, __KERNEL_CS)
50 
51 /* Task gate */
52 #define TSKG(_vector, _gdt)				\
53 	G(_vector, NULL, DEFAULT_STACK, GATE_TASK, DPL0, _gdt << 3)
54 
55 /*
56  * Early traps running on the DEFAULT_STACK because the other interrupt
57  * stacks work only after cpu_init().
58  */
59 static const __initconst struct idt_data early_idts[] = {
60 	INTG(X86_TRAP_DB,		debug),
61 	SYSG(X86_TRAP_BP,		int3),
62 #ifdef CONFIG_X86_32
63 	INTG(X86_TRAP_PF,		page_fault),
64 #endif
65 };
66 
67 /*
68  * The default IDT entries which are set up in trap_init() before
69  * cpu_init() is invoked. Interrupt stacks cannot be used at that point and
70  * the traps which use them are reinitialized with IST after cpu_init() has
71  * set up TSS.
72  */
73 static const __initconst struct idt_data def_idts[] = {
74 	INTG(X86_TRAP_DE,		divide_error),
75 	INTG(X86_TRAP_NMI,		nmi),
76 	INTG(X86_TRAP_BR,		bounds),
77 	INTG(X86_TRAP_UD,		invalid_op),
78 	INTG(X86_TRAP_NM,		device_not_available),
79 	INTG(X86_TRAP_OLD_MF,		coprocessor_segment_overrun),
80 	INTG(X86_TRAP_TS,		invalid_TSS),
81 	INTG(X86_TRAP_NP,		segment_not_present),
82 	INTG(X86_TRAP_SS,		stack_segment),
83 	INTG(X86_TRAP_GP,		general_protection),
84 	INTG(X86_TRAP_SPURIOUS,		spurious_interrupt_bug),
85 	INTG(X86_TRAP_MF,		coprocessor_error),
86 	INTG(X86_TRAP_AC,		alignment_check),
87 	INTG(X86_TRAP_XF,		simd_coprocessor_error),
88 
89 #ifdef CONFIG_X86_32
90 	TSKG(X86_TRAP_DF,		GDT_ENTRY_DOUBLEFAULT_TSS),
91 #else
92 	INTG(X86_TRAP_DF,		double_fault),
93 #endif
94 	INTG(X86_TRAP_DB,		debug),
95 
96 #ifdef CONFIG_X86_MCE
97 	INTG(X86_TRAP_MC,		&machine_check),
98 #endif
99 
100 	SYSG(X86_TRAP_OF,		overflow),
101 #if defined(CONFIG_IA32_EMULATION)
102 	SYSG(IA32_SYSCALL_VECTOR,	entry_INT80_compat),
103 #elif defined(CONFIG_X86_32)
104 	SYSG(IA32_SYSCALL_VECTOR,	entry_INT80_32),
105 #endif
106 };
107 
108 /*
109  * The APIC and SMP idt entries
110  */
111 static const __initconst struct idt_data apic_idts[] = {
112 #ifdef CONFIG_SMP
113 	INTG(RESCHEDULE_VECTOR,		reschedule_interrupt),
114 	INTG(CALL_FUNCTION_VECTOR,	call_function_interrupt),
115 	INTG(CALL_FUNCTION_SINGLE_VECTOR, call_function_single_interrupt),
116 	INTG(IRQ_MOVE_CLEANUP_VECTOR,	irq_move_cleanup_interrupt),
117 	INTG(REBOOT_VECTOR,		reboot_interrupt),
118 #endif
119 
120 #ifdef CONFIG_X86_THERMAL_VECTOR
121 	INTG(THERMAL_APIC_VECTOR,	thermal_interrupt),
122 #endif
123 
124 #ifdef CONFIG_X86_MCE_THRESHOLD
125 	INTG(THRESHOLD_APIC_VECTOR,	threshold_interrupt),
126 #endif
127 
128 #ifdef CONFIG_X86_MCE_AMD
129 	INTG(DEFERRED_ERROR_VECTOR,	deferred_error_interrupt),
130 #endif
131 
132 #ifdef CONFIG_X86_LOCAL_APIC
133 	INTG(LOCAL_TIMER_VECTOR,	apic_timer_interrupt),
134 	INTG(X86_PLATFORM_IPI_VECTOR,	x86_platform_ipi),
135 # ifdef CONFIG_HAVE_KVM
136 	INTG(POSTED_INTR_VECTOR,	kvm_posted_intr_ipi),
137 	INTG(POSTED_INTR_WAKEUP_VECTOR, kvm_posted_intr_wakeup_ipi),
138 	INTG(POSTED_INTR_NESTED_VECTOR, kvm_posted_intr_nested_ipi),
139 # endif
140 # ifdef CONFIG_IRQ_WORK
141 	INTG(IRQ_WORK_VECTOR,		irq_work_interrupt),
142 # endif
143 #ifdef CONFIG_X86_UV
144 	INTG(UV_BAU_MESSAGE,		uv_bau_message_intr1),
145 #endif
146 	INTG(SPURIOUS_APIC_VECTOR,	spurious_interrupt),
147 	INTG(ERROR_APIC_VECTOR,		error_interrupt),
148 #endif
149 };
150 
151 #ifdef CONFIG_X86_64
152 /*
153  * Early traps running on the DEFAULT_STACK because the other interrupt
154  * stacks work only after cpu_init().
155  */
156 static const __initconst struct idt_data early_pf_idts[] = {
157 	INTG(X86_TRAP_PF,		page_fault),
158 };
159 
160 /*
161  * Override for the debug_idt. Same as the default, but with interrupt
162  * stack set to DEFAULT_STACK (0). Required for NMI trap handling.
163  */
164 static const __initconst struct idt_data dbg_idts[] = {
165 	INTG(X86_TRAP_DB,	debug),
166 };
167 #endif
168 
169 /* Must be page-aligned because the real IDT is used in a fixmap. */
170 gate_desc idt_table[IDT_ENTRIES] __page_aligned_bss;
171 
172 struct desc_ptr idt_descr __ro_after_init = {
173 	.size		= (IDT_ENTRIES * 2 * sizeof(unsigned long)) - 1,
174 	.address	= (unsigned long) idt_table,
175 };
176 
177 #ifdef CONFIG_X86_64
178 /* No need to be aligned, but done to keep all IDTs defined the same way. */
179 gate_desc debug_idt_table[IDT_ENTRIES] __page_aligned_bss;
180 
181 /*
182  * The exceptions which use Interrupt stacks. They are setup after
183  * cpu_init() when the TSS has been initialized.
184  */
185 static const __initconst struct idt_data ist_idts[] = {
186 	ISTG(X86_TRAP_DB,	debug,		IST_INDEX_DB),
187 	ISTG(X86_TRAP_NMI,	nmi,		IST_INDEX_NMI),
188 	ISTG(X86_TRAP_DF,	double_fault,	IST_INDEX_DF),
189 #ifdef CONFIG_X86_MCE
190 	ISTG(X86_TRAP_MC,	&machine_check,	IST_INDEX_MCE),
191 #endif
192 };
193 
194 /*
195  * Override for the debug_idt. Same as the default, but with interrupt
196  * stack set to DEFAULT_STACK (0). Required for NMI trap handling.
197  */
198 const struct desc_ptr debug_idt_descr = {
199 	.size		= IDT_ENTRIES * 16 - 1,
200 	.address	= (unsigned long) debug_idt_table,
201 };
202 #endif
203 
204 static inline void idt_init_desc(gate_desc *gate, const struct idt_data *d)
205 {
206 	unsigned long addr = (unsigned long) d->addr;
207 
208 	gate->offset_low	= (u16) addr;
209 	gate->segment		= (u16) d->segment;
210 	gate->bits		= d->bits;
211 	gate->offset_middle	= (u16) (addr >> 16);
212 #ifdef CONFIG_X86_64
213 	gate->offset_high	= (u32) (addr >> 32);
214 	gate->reserved		= 0;
215 #endif
216 }
217 
218 static void
219 idt_setup_from_table(gate_desc *idt, const struct idt_data *t, int size, bool sys)
220 {
221 	gate_desc desc;
222 
223 	for (; size > 0; t++, size--) {
224 		idt_init_desc(&desc, t);
225 		write_idt_entry(idt, t->vector, &desc);
226 		if (sys)
227 			set_bit(t->vector, system_vectors);
228 	}
229 }
230 
231 static void set_intr_gate(unsigned int n, const void *addr)
232 {
233 	struct idt_data data;
234 
235 	BUG_ON(n > 0xFF);
236 
237 	memset(&data, 0, sizeof(data));
238 	data.vector	= n;
239 	data.addr	= addr;
240 	data.segment	= __KERNEL_CS;
241 	data.bits.type	= GATE_INTERRUPT;
242 	data.bits.p	= 1;
243 
244 	idt_setup_from_table(idt_table, &data, 1, false);
245 }
246 
247 /**
248  * idt_setup_early_traps - Initialize the idt table with early traps
249  *
250  * On X8664 these traps do not use interrupt stacks as they can't work
251  * before cpu_init() is invoked and sets up TSS. The IST variants are
252  * installed after that.
253  */
254 void __init idt_setup_early_traps(void)
255 {
256 	idt_setup_from_table(idt_table, early_idts, ARRAY_SIZE(early_idts),
257 			     true);
258 	load_idt(&idt_descr);
259 }
260 
261 /**
262  * idt_setup_traps - Initialize the idt table with default traps
263  */
264 void __init idt_setup_traps(void)
265 {
266 	idt_setup_from_table(idt_table, def_idts, ARRAY_SIZE(def_idts), true);
267 }
268 
269 #ifdef CONFIG_X86_64
270 /**
271  * idt_setup_early_pf - Initialize the idt table with early pagefault handler
272  *
273  * On X8664 this does not use interrupt stacks as they can't work before
274  * cpu_init() is invoked and sets up TSS. The IST variant is installed
275  * after that.
276  *
277  * FIXME: Why is 32bit and 64bit installing the PF handler at different
278  * places in the early setup code?
279  */
280 void __init idt_setup_early_pf(void)
281 {
282 	idt_setup_from_table(idt_table, early_pf_idts,
283 			     ARRAY_SIZE(early_pf_idts), true);
284 }
285 
286 /**
287  * idt_setup_ist_traps - Initialize the idt table with traps using IST
288  */
289 void __init idt_setup_ist_traps(void)
290 {
291 	idt_setup_from_table(idt_table, ist_idts, ARRAY_SIZE(ist_idts), true);
292 }
293 
294 /**
295  * idt_setup_debugidt_traps - Initialize the debug idt table with debug traps
296  */
297 void __init idt_setup_debugidt_traps(void)
298 {
299 	memcpy(&debug_idt_table, &idt_table, IDT_ENTRIES * 16);
300 
301 	idt_setup_from_table(debug_idt_table, dbg_idts, ARRAY_SIZE(dbg_idts), false);
302 }
303 #endif
304 
305 /**
306  * idt_setup_apic_and_irq_gates - Setup APIC/SMP and normal interrupt gates
307  */
308 void __init idt_setup_apic_and_irq_gates(void)
309 {
310 	int i = FIRST_EXTERNAL_VECTOR;
311 	void *entry;
312 
313 	idt_setup_from_table(idt_table, apic_idts, ARRAY_SIZE(apic_idts), true);
314 
315 	for_each_clear_bit_from(i, system_vectors, FIRST_SYSTEM_VECTOR) {
316 		entry = irq_entries_start + 8 * (i - FIRST_EXTERNAL_VECTOR);
317 		set_intr_gate(i, entry);
318 	}
319 
320 #ifdef CONFIG_X86_LOCAL_APIC
321 	for_each_clear_bit_from(i, system_vectors, NR_VECTORS) {
322 		set_bit(i, system_vectors);
323 		set_intr_gate(i, spurious_interrupt);
324 	}
325 #endif
326 }
327 
328 /**
329  * idt_setup_early_handler - Initializes the idt table with early handlers
330  */
331 void __init idt_setup_early_handler(void)
332 {
333 	int i;
334 
335 	for (i = 0; i < NUM_EXCEPTION_VECTORS; i++)
336 		set_intr_gate(i, early_idt_handler_array[i]);
337 #ifdef CONFIG_X86_32
338 	for ( ; i < NR_VECTORS; i++)
339 		set_intr_gate(i, early_ignore_irq);
340 #endif
341 	load_idt(&idt_descr);
342 }
343 
344 /**
345  * idt_invalidate - Invalidate interrupt descriptor table
346  * @addr:	The virtual address of the 'invalid' IDT
347  */
348 void idt_invalidate(void *addr)
349 {
350 	struct desc_ptr idt = { .address = (unsigned long) addr, .size = 0 };
351 
352 	load_idt(&idt);
353 }
354 
355 void __init update_intr_gate(unsigned int n, const void *addr)
356 {
357 	if (WARN_ON_ONCE(!test_bit(n, system_vectors)))
358 		return;
359 	set_intr_gate(n, addr);
360 }
361 
362 void alloc_intr_gate(unsigned int n, const void *addr)
363 {
364 	BUG_ON(n < FIRST_SYSTEM_VECTOR);
365 	if (!test_and_set_bit(n, system_vectors))
366 		set_intr_gate(n, addr);
367 }
368