xref: /openbmc/linux/arch/x86/kernel/idt.c (revision b830f94f)
1 // SPDX-License-Identifier: GPL-2.0-only
2 /*
3  * Interrupt descriptor table related code
4  */
5 #include <linux/interrupt.h>
6 
7 #include <asm/traps.h>
8 #include <asm/proto.h>
9 #include <asm/desc.h>
10 #include <asm/hw_irq.h>
11 
12 struct idt_data {
13 	unsigned int	vector;
14 	unsigned int	segment;
15 	struct idt_bits	bits;
16 	const void	*addr;
17 };
18 
19 #define DPL0		0x0
20 #define DPL3		0x3
21 
22 #define DEFAULT_STACK	0
23 
24 #define G(_vector, _addr, _ist, _type, _dpl, _segment)	\
25 	{						\
26 		.vector		= _vector,		\
27 		.bits.ist	= _ist,			\
28 		.bits.type	= _type,		\
29 		.bits.dpl	= _dpl,			\
30 		.bits.p		= 1,			\
31 		.addr		= _addr,		\
32 		.segment	= _segment,		\
33 	}
34 
35 /* Interrupt gate */
36 #define INTG(_vector, _addr)				\
37 	G(_vector, _addr, DEFAULT_STACK, GATE_INTERRUPT, DPL0, __KERNEL_CS)
38 
39 /* System interrupt gate */
40 #define SYSG(_vector, _addr)				\
41 	G(_vector, _addr, DEFAULT_STACK, GATE_INTERRUPT, DPL3, __KERNEL_CS)
42 
43 /*
44  * Interrupt gate with interrupt stack. The _ist index is the index in
45  * the tss.ist[] array, but for the descriptor it needs to start at 1.
46  */
47 #define ISTG(_vector, _addr, _ist)			\
48 	G(_vector, _addr, _ist + 1, GATE_INTERRUPT, DPL0, __KERNEL_CS)
49 
50 /* Task gate */
51 #define TSKG(_vector, _gdt)				\
52 	G(_vector, NULL, DEFAULT_STACK, GATE_TASK, DPL0, _gdt << 3)
53 
54 /*
55  * Early traps running on the DEFAULT_STACK because the other interrupt
56  * stacks work only after cpu_init().
57  */
58 static const __initconst struct idt_data early_idts[] = {
59 	INTG(X86_TRAP_DB,		debug),
60 	SYSG(X86_TRAP_BP,		int3),
61 #ifdef CONFIG_X86_32
62 	INTG(X86_TRAP_PF,		page_fault),
63 #endif
64 };
65 
66 /*
67  * The default IDT entries which are set up in trap_init() before
68  * cpu_init() is invoked. Interrupt stacks cannot be used at that point and
69  * the traps which use them are reinitialized with IST after cpu_init() has
70  * set up TSS.
71  */
72 static const __initconst struct idt_data def_idts[] = {
73 	INTG(X86_TRAP_DE,		divide_error),
74 	INTG(X86_TRAP_NMI,		nmi),
75 	INTG(X86_TRAP_BR,		bounds),
76 	INTG(X86_TRAP_UD,		invalid_op),
77 	INTG(X86_TRAP_NM,		device_not_available),
78 	INTG(X86_TRAP_OLD_MF,		coprocessor_segment_overrun),
79 	INTG(X86_TRAP_TS,		invalid_TSS),
80 	INTG(X86_TRAP_NP,		segment_not_present),
81 	INTG(X86_TRAP_SS,		stack_segment),
82 	INTG(X86_TRAP_GP,		general_protection),
83 	INTG(X86_TRAP_SPURIOUS,		spurious_interrupt_bug),
84 	INTG(X86_TRAP_MF,		coprocessor_error),
85 	INTG(X86_TRAP_AC,		alignment_check),
86 	INTG(X86_TRAP_XF,		simd_coprocessor_error),
87 
88 #ifdef CONFIG_X86_32
89 	TSKG(X86_TRAP_DF,		GDT_ENTRY_DOUBLEFAULT_TSS),
90 #else
91 	INTG(X86_TRAP_DF,		double_fault),
92 #endif
93 	INTG(X86_TRAP_DB,		debug),
94 
95 #ifdef CONFIG_X86_MCE
96 	INTG(X86_TRAP_MC,		&machine_check),
97 #endif
98 
99 	SYSG(X86_TRAP_OF,		overflow),
100 #if defined(CONFIG_IA32_EMULATION)
101 	SYSG(IA32_SYSCALL_VECTOR,	entry_INT80_compat),
102 #elif defined(CONFIG_X86_32)
103 	SYSG(IA32_SYSCALL_VECTOR,	entry_INT80_32),
104 #endif
105 };
106 
107 /*
108  * The APIC and SMP idt entries
109  */
110 static const __initconst struct idt_data apic_idts[] = {
111 #ifdef CONFIG_SMP
112 	INTG(RESCHEDULE_VECTOR,		reschedule_interrupt),
113 	INTG(CALL_FUNCTION_VECTOR,	call_function_interrupt),
114 	INTG(CALL_FUNCTION_SINGLE_VECTOR, call_function_single_interrupt),
115 	INTG(IRQ_MOVE_CLEANUP_VECTOR,	irq_move_cleanup_interrupt),
116 	INTG(REBOOT_VECTOR,		reboot_interrupt),
117 #endif
118 
119 #ifdef CONFIG_X86_THERMAL_VECTOR
120 	INTG(THERMAL_APIC_VECTOR,	thermal_interrupt),
121 #endif
122 
123 #ifdef CONFIG_X86_MCE_THRESHOLD
124 	INTG(THRESHOLD_APIC_VECTOR,	threshold_interrupt),
125 #endif
126 
127 #ifdef CONFIG_X86_MCE_AMD
128 	INTG(DEFERRED_ERROR_VECTOR,	deferred_error_interrupt),
129 #endif
130 
131 #ifdef CONFIG_X86_LOCAL_APIC
132 	INTG(LOCAL_TIMER_VECTOR,	apic_timer_interrupt),
133 	INTG(X86_PLATFORM_IPI_VECTOR,	x86_platform_ipi),
134 # ifdef CONFIG_HAVE_KVM
135 	INTG(POSTED_INTR_VECTOR,	kvm_posted_intr_ipi),
136 	INTG(POSTED_INTR_WAKEUP_VECTOR, kvm_posted_intr_wakeup_ipi),
137 	INTG(POSTED_INTR_NESTED_VECTOR, kvm_posted_intr_nested_ipi),
138 # endif
139 # ifdef CONFIG_IRQ_WORK
140 	INTG(IRQ_WORK_VECTOR,		irq_work_interrupt),
141 # endif
142 #ifdef CONFIG_X86_UV
143 	INTG(UV_BAU_MESSAGE,		uv_bau_message_intr1),
144 #endif
145 	INTG(SPURIOUS_APIC_VECTOR,	spurious_interrupt),
146 	INTG(ERROR_APIC_VECTOR,		error_interrupt),
147 #endif
148 };
149 
150 #ifdef CONFIG_X86_64
151 /*
152  * Early traps running on the DEFAULT_STACK because the other interrupt
153  * stacks work only after cpu_init().
154  */
155 static const __initconst struct idt_data early_pf_idts[] = {
156 	INTG(X86_TRAP_PF,		page_fault),
157 };
158 
159 /*
160  * Override for the debug_idt. Same as the default, but with interrupt
161  * stack set to DEFAULT_STACK (0). Required for NMI trap handling.
162  */
163 static const __initconst struct idt_data dbg_idts[] = {
164 	INTG(X86_TRAP_DB,	debug),
165 };
166 #endif
167 
168 /* Must be page-aligned because the real IDT is used in a fixmap. */
169 gate_desc idt_table[IDT_ENTRIES] __page_aligned_bss;
170 
171 struct desc_ptr idt_descr __ro_after_init = {
172 	.size		= (IDT_ENTRIES * 2 * sizeof(unsigned long)) - 1,
173 	.address	= (unsigned long) idt_table,
174 };
175 
176 #ifdef CONFIG_X86_64
177 /* No need to be aligned, but done to keep all IDTs defined the same way. */
178 gate_desc debug_idt_table[IDT_ENTRIES] __page_aligned_bss;
179 
180 /*
181  * The exceptions which use Interrupt stacks. They are setup after
182  * cpu_init() when the TSS has been initialized.
183  */
184 static const __initconst struct idt_data ist_idts[] = {
185 	ISTG(X86_TRAP_DB,	debug,		IST_INDEX_DB),
186 	ISTG(X86_TRAP_NMI,	nmi,		IST_INDEX_NMI),
187 	ISTG(X86_TRAP_DF,	double_fault,	IST_INDEX_DF),
188 #ifdef CONFIG_X86_MCE
189 	ISTG(X86_TRAP_MC,	&machine_check,	IST_INDEX_MCE),
190 #endif
191 };
192 
193 /*
194  * Override for the debug_idt. Same as the default, but with interrupt
195  * stack set to DEFAULT_STACK (0). Required for NMI trap handling.
196  */
197 const struct desc_ptr debug_idt_descr = {
198 	.size		= IDT_ENTRIES * 16 - 1,
199 	.address	= (unsigned long) debug_idt_table,
200 };
201 #endif
202 
203 static inline void idt_init_desc(gate_desc *gate, const struct idt_data *d)
204 {
205 	unsigned long addr = (unsigned long) d->addr;
206 
207 	gate->offset_low	= (u16) addr;
208 	gate->segment		= (u16) d->segment;
209 	gate->bits		= d->bits;
210 	gate->offset_middle	= (u16) (addr >> 16);
211 #ifdef CONFIG_X86_64
212 	gate->offset_high	= (u32) (addr >> 32);
213 	gate->reserved		= 0;
214 #endif
215 }
216 
217 static void
218 idt_setup_from_table(gate_desc *idt, const struct idt_data *t, int size, bool sys)
219 {
220 	gate_desc desc;
221 
222 	for (; size > 0; t++, size--) {
223 		idt_init_desc(&desc, t);
224 		write_idt_entry(idt, t->vector, &desc);
225 		if (sys)
226 			set_bit(t->vector, system_vectors);
227 	}
228 }
229 
230 static void set_intr_gate(unsigned int n, const void *addr)
231 {
232 	struct idt_data data;
233 
234 	BUG_ON(n > 0xFF);
235 
236 	memset(&data, 0, sizeof(data));
237 	data.vector	= n;
238 	data.addr	= addr;
239 	data.segment	= __KERNEL_CS;
240 	data.bits.type	= GATE_INTERRUPT;
241 	data.bits.p	= 1;
242 
243 	idt_setup_from_table(idt_table, &data, 1, false);
244 }
245 
246 /**
247  * idt_setup_early_traps - Initialize the idt table with early traps
248  *
249  * On X8664 these traps do not use interrupt stacks as they can't work
250  * before cpu_init() is invoked and sets up TSS. The IST variants are
251  * installed after that.
252  */
253 void __init idt_setup_early_traps(void)
254 {
255 	idt_setup_from_table(idt_table, early_idts, ARRAY_SIZE(early_idts),
256 			     true);
257 	load_idt(&idt_descr);
258 }
259 
260 /**
261  * idt_setup_traps - Initialize the idt table with default traps
262  */
263 void __init idt_setup_traps(void)
264 {
265 	idt_setup_from_table(idt_table, def_idts, ARRAY_SIZE(def_idts), true);
266 }
267 
268 #ifdef CONFIG_X86_64
269 /**
270  * idt_setup_early_pf - Initialize the idt table with early pagefault handler
271  *
272  * On X8664 this does not use interrupt stacks as they can't work before
273  * cpu_init() is invoked and sets up TSS. The IST variant is installed
274  * after that.
275  *
276  * FIXME: Why is 32bit and 64bit installing the PF handler at different
277  * places in the early setup code?
278  */
279 void __init idt_setup_early_pf(void)
280 {
281 	idt_setup_from_table(idt_table, early_pf_idts,
282 			     ARRAY_SIZE(early_pf_idts), true);
283 }
284 
285 /**
286  * idt_setup_ist_traps - Initialize the idt table with traps using IST
287  */
288 void __init idt_setup_ist_traps(void)
289 {
290 	idt_setup_from_table(idt_table, ist_idts, ARRAY_SIZE(ist_idts), true);
291 }
292 
293 /**
294  * idt_setup_debugidt_traps - Initialize the debug idt table with debug traps
295  */
296 void __init idt_setup_debugidt_traps(void)
297 {
298 	memcpy(&debug_idt_table, &idt_table, IDT_ENTRIES * 16);
299 
300 	idt_setup_from_table(debug_idt_table, dbg_idts, ARRAY_SIZE(dbg_idts), false);
301 }
302 #endif
303 
304 /**
305  * idt_setup_apic_and_irq_gates - Setup APIC/SMP and normal interrupt gates
306  */
307 void __init idt_setup_apic_and_irq_gates(void)
308 {
309 	int i = FIRST_EXTERNAL_VECTOR;
310 	void *entry;
311 
312 	idt_setup_from_table(idt_table, apic_idts, ARRAY_SIZE(apic_idts), true);
313 
314 	for_each_clear_bit_from(i, system_vectors, FIRST_SYSTEM_VECTOR) {
315 		entry = irq_entries_start + 8 * (i - FIRST_EXTERNAL_VECTOR);
316 		set_intr_gate(i, entry);
317 	}
318 
319 #ifdef CONFIG_X86_LOCAL_APIC
320 	for_each_clear_bit_from(i, system_vectors, NR_VECTORS) {
321 		set_bit(i, system_vectors);
322 		entry = spurious_entries_start + 8 * (i - FIRST_SYSTEM_VECTOR);
323 		set_intr_gate(i, entry);
324 	}
325 #endif
326 }
327 
328 /**
329  * idt_setup_early_handler - Initializes the idt table with early handlers
330  */
331 void __init idt_setup_early_handler(void)
332 {
333 	int i;
334 
335 	for (i = 0; i < NUM_EXCEPTION_VECTORS; i++)
336 		set_intr_gate(i, early_idt_handler_array[i]);
337 #ifdef CONFIG_X86_32
338 	for ( ; i < NR_VECTORS; i++)
339 		set_intr_gate(i, early_ignore_irq);
340 #endif
341 	load_idt(&idt_descr);
342 }
343 
344 /**
345  * idt_invalidate - Invalidate interrupt descriptor table
346  * @addr:	The virtual address of the 'invalid' IDT
347  */
348 void idt_invalidate(void *addr)
349 {
350 	struct desc_ptr idt = { .address = (unsigned long) addr, .size = 0 };
351 
352 	load_idt(&idt);
353 }
354 
355 void __init update_intr_gate(unsigned int n, const void *addr)
356 {
357 	if (WARN_ON_ONCE(!test_bit(n, system_vectors)))
358 		return;
359 	set_intr_gate(n, addr);
360 }
361 
362 void alloc_intr_gate(unsigned int n, const void *addr)
363 {
364 	BUG_ON(n < FIRST_SYSTEM_VECTOR);
365 	if (!test_and_set_bit(n, system_vectors))
366 		set_intr_gate(n, addr);
367 }
368