xref: /openbmc/linux/arch/x86/kernel/idt.c (revision 26cfd12b)
1 // SPDX-License-Identifier: GPL-2.0-only
2 /*
3  * Interrupt descriptor table related code
4  */
5 #include <linux/interrupt.h>
6 
7 #include <asm/cpu_entry_area.h>
8 #include <asm/set_memory.h>
9 #include <asm/traps.h>
10 #include <asm/proto.h>
11 #include <asm/desc.h>
12 #include <asm/hw_irq.h>
13 
14 struct idt_data {
15 	unsigned int	vector;
16 	unsigned int	segment;
17 	struct idt_bits	bits;
18 	const void	*addr;
19 };
20 
21 #define DPL0		0x0
22 #define DPL3		0x3
23 
24 #define DEFAULT_STACK	0
25 
26 #define G(_vector, _addr, _ist, _type, _dpl, _segment)	\
27 	{						\
28 		.vector		= _vector,		\
29 		.bits.ist	= _ist,			\
30 		.bits.type	= _type,		\
31 		.bits.dpl	= _dpl,			\
32 		.bits.p		= 1,			\
33 		.addr		= _addr,		\
34 		.segment	= _segment,		\
35 	}
36 
37 /* Interrupt gate */
38 #define INTG(_vector, _addr)				\
39 	G(_vector, _addr, DEFAULT_STACK, GATE_INTERRUPT, DPL0, __KERNEL_CS)
40 
41 /* System interrupt gate */
42 #define SYSG(_vector, _addr)				\
43 	G(_vector, _addr, DEFAULT_STACK, GATE_INTERRUPT, DPL3, __KERNEL_CS)
44 
45 /*
46  * Interrupt gate with interrupt stack. The _ist index is the index in
47  * the tss.ist[] array, but for the descriptor it needs to start at 1.
48  */
49 #define ISTG(_vector, _addr, _ist)			\
50 	G(_vector, _addr, _ist + 1, GATE_INTERRUPT, DPL0, __KERNEL_CS)
51 
52 /* Task gate */
53 #define TSKG(_vector, _gdt)				\
54 	G(_vector, NULL, DEFAULT_STACK, GATE_TASK, DPL0, _gdt << 3)
55 
56 #define IDT_TABLE_SIZE		(IDT_ENTRIES * sizeof(gate_desc))
57 
58 static bool idt_setup_done __initdata;
59 
60 /*
61  * Early traps running on the DEFAULT_STACK because the other interrupt
62  * stacks work only after cpu_init().
63  */
64 static const __initconst struct idt_data early_idts[] = {
65 	INTG(X86_TRAP_DB,		asm_exc_debug),
66 	SYSG(X86_TRAP_BP,		asm_exc_int3),
67 
68 #ifdef CONFIG_X86_32
69 	/*
70 	 * Not possible on 64-bit. See idt_setup_early_pf() for details.
71 	 */
72 	INTG(X86_TRAP_PF,		asm_exc_page_fault),
73 #endif
74 };
75 
76 /*
77  * The default IDT entries which are set up in trap_init() before
78  * cpu_init() is invoked. Interrupt stacks cannot be used at that point and
79  * the traps which use them are reinitialized with IST after cpu_init() has
80  * set up TSS.
81  */
82 static const __initconst struct idt_data def_idts[] = {
83 	INTG(X86_TRAP_DE,		asm_exc_divide_error),
84 	INTG(X86_TRAP_NMI,		asm_exc_nmi),
85 	INTG(X86_TRAP_BR,		asm_exc_bounds),
86 	INTG(X86_TRAP_UD,		asm_exc_invalid_op),
87 	INTG(X86_TRAP_NM,		asm_exc_device_not_available),
88 	INTG(X86_TRAP_OLD_MF,		asm_exc_coproc_segment_overrun),
89 	INTG(X86_TRAP_TS,		asm_exc_invalid_tss),
90 	INTG(X86_TRAP_NP,		asm_exc_segment_not_present),
91 	INTG(X86_TRAP_SS,		asm_exc_stack_segment),
92 	INTG(X86_TRAP_GP,		asm_exc_general_protection),
93 	INTG(X86_TRAP_SPURIOUS,		asm_exc_spurious_interrupt_bug),
94 	INTG(X86_TRAP_MF,		asm_exc_coprocessor_error),
95 	INTG(X86_TRAP_AC,		asm_exc_alignment_check),
96 	INTG(X86_TRAP_XF,		asm_exc_simd_coprocessor_error),
97 
98 #ifdef CONFIG_X86_32
99 	TSKG(X86_TRAP_DF,		GDT_ENTRY_DOUBLEFAULT_TSS),
100 #else
101 	INTG(X86_TRAP_DF,		asm_exc_double_fault),
102 #endif
103 	INTG(X86_TRAP_DB,		asm_exc_debug),
104 
105 #ifdef CONFIG_X86_MCE
106 	INTG(X86_TRAP_MC,		asm_exc_machine_check),
107 #endif
108 
109 	SYSG(X86_TRAP_OF,		asm_exc_overflow),
110 #if defined(CONFIG_IA32_EMULATION)
111 	SYSG(IA32_SYSCALL_VECTOR,	entry_INT80_compat),
112 #elif defined(CONFIG_X86_32)
113 	SYSG(IA32_SYSCALL_VECTOR,	entry_INT80_32),
114 #endif
115 };
116 
117 /*
118  * The APIC and SMP idt entries
119  */
120 static const __initconst struct idt_data apic_idts[] = {
121 #ifdef CONFIG_SMP
122 	INTG(RESCHEDULE_VECTOR,			asm_sysvec_reschedule_ipi),
123 	INTG(CALL_FUNCTION_VECTOR,		asm_sysvec_call_function),
124 	INTG(CALL_FUNCTION_SINGLE_VECTOR,	asm_sysvec_call_function_single),
125 	INTG(IRQ_MOVE_CLEANUP_VECTOR,		asm_sysvec_irq_move_cleanup),
126 	INTG(REBOOT_VECTOR,			asm_sysvec_reboot),
127 #endif
128 
129 #ifdef CONFIG_X86_THERMAL_VECTOR
130 	INTG(THERMAL_APIC_VECTOR,		asm_sysvec_thermal),
131 #endif
132 
133 #ifdef CONFIG_X86_MCE_THRESHOLD
134 	INTG(THRESHOLD_APIC_VECTOR,		asm_sysvec_threshold),
135 #endif
136 
137 #ifdef CONFIG_X86_MCE_AMD
138 	INTG(DEFERRED_ERROR_VECTOR,		asm_sysvec_deferred_error),
139 #endif
140 
141 #ifdef CONFIG_X86_LOCAL_APIC
142 	INTG(LOCAL_TIMER_VECTOR,		asm_sysvec_apic_timer_interrupt),
143 	INTG(X86_PLATFORM_IPI_VECTOR,		asm_sysvec_x86_platform_ipi),
144 # ifdef CONFIG_HAVE_KVM
145 	INTG(POSTED_INTR_VECTOR,		asm_sysvec_kvm_posted_intr_ipi),
146 	INTG(POSTED_INTR_WAKEUP_VECTOR,		asm_sysvec_kvm_posted_intr_wakeup_ipi),
147 	INTG(POSTED_INTR_NESTED_VECTOR,		asm_sysvec_kvm_posted_intr_nested_ipi),
148 # endif
149 # ifdef CONFIG_IRQ_WORK
150 	INTG(IRQ_WORK_VECTOR,			asm_sysvec_irq_work),
151 # endif
152 # ifdef CONFIG_X86_UV
153 	INTG(UV_BAU_MESSAGE,			asm_sysvec_uv_bau_message),
154 # endif
155 	INTG(SPURIOUS_APIC_VECTOR,		asm_sysvec_spurious_apic_interrupt),
156 	INTG(ERROR_APIC_VECTOR,			asm_sysvec_error_interrupt),
157 #endif
158 };
159 
160 /* Must be page-aligned because the real IDT is used in the cpu entry area */
161 static gate_desc idt_table[IDT_ENTRIES] __page_aligned_bss;
162 
163 struct desc_ptr idt_descr __ro_after_init = {
164 	.size		= IDT_TABLE_SIZE - 1,
165 	.address	= (unsigned long) idt_table,
166 };
167 
168 void load_current_idt(void)
169 {
170 	lockdep_assert_irqs_disabled();
171 	load_idt(&idt_descr);
172 }
173 
174 #ifdef CONFIG_X86_F00F_BUG
175 bool idt_is_f00f_address(unsigned long address)
176 {
177 	return ((address - idt_descr.address) >> 3) == 6;
178 }
179 #endif
180 
181 static inline void idt_init_desc(gate_desc *gate, const struct idt_data *d)
182 {
183 	unsigned long addr = (unsigned long) d->addr;
184 
185 	gate->offset_low	= (u16) addr;
186 	gate->segment		= (u16) d->segment;
187 	gate->bits		= d->bits;
188 	gate->offset_middle	= (u16) (addr >> 16);
189 #ifdef CONFIG_X86_64
190 	gate->offset_high	= (u32) (addr >> 32);
191 	gate->reserved		= 0;
192 #endif
193 }
194 
195 static __init void
196 idt_setup_from_table(gate_desc *idt, const struct idt_data *t, int size, bool sys)
197 {
198 	gate_desc desc;
199 
200 	for (; size > 0; t++, size--) {
201 		idt_init_desc(&desc, t);
202 		write_idt_entry(idt, t->vector, &desc);
203 		if (sys)
204 			set_bit(t->vector, system_vectors);
205 	}
206 }
207 
208 static __init void set_intr_gate(unsigned int n, const void *addr)
209 {
210 	struct idt_data data;
211 
212 	BUG_ON(n > 0xFF);
213 
214 	memset(&data, 0, sizeof(data));
215 	data.vector	= n;
216 	data.addr	= addr;
217 	data.segment	= __KERNEL_CS;
218 	data.bits.type	= GATE_INTERRUPT;
219 	data.bits.p	= 1;
220 
221 	idt_setup_from_table(idt_table, &data, 1, false);
222 }
223 
224 /**
225  * idt_setup_early_traps - Initialize the idt table with early traps
226  *
227  * On X8664 these traps do not use interrupt stacks as they can't work
228  * before cpu_init() is invoked and sets up TSS. The IST variants are
229  * installed after that.
230  */
231 void __init idt_setup_early_traps(void)
232 {
233 	idt_setup_from_table(idt_table, early_idts, ARRAY_SIZE(early_idts),
234 			     true);
235 	load_idt(&idt_descr);
236 }
237 
238 /**
239  * idt_setup_traps - Initialize the idt table with default traps
240  */
241 void __init idt_setup_traps(void)
242 {
243 	idt_setup_from_table(idt_table, def_idts, ARRAY_SIZE(def_idts), true);
244 }
245 
246 #ifdef CONFIG_X86_64
247 /*
248  * Early traps running on the DEFAULT_STACK because the other interrupt
249  * stacks work only after cpu_init().
250  */
251 static const __initconst struct idt_data early_pf_idts[] = {
252 	INTG(X86_TRAP_PF,		asm_exc_page_fault),
253 };
254 
255 /*
256  * The exceptions which use Interrupt stacks. They are setup after
257  * cpu_init() when the TSS has been initialized.
258  */
259 static const __initconst struct idt_data ist_idts[] = {
260 	ISTG(X86_TRAP_DB,	asm_exc_debug,		IST_INDEX_DB),
261 	ISTG(X86_TRAP_NMI,	asm_exc_nmi,		IST_INDEX_NMI),
262 	ISTG(X86_TRAP_DF,	asm_exc_double_fault,	IST_INDEX_DF),
263 #ifdef CONFIG_X86_MCE
264 	ISTG(X86_TRAP_MC,	asm_exc_machine_check,	IST_INDEX_MCE),
265 #endif
266 };
267 
268 /**
269  * idt_setup_early_pf - Initialize the idt table with early pagefault handler
270  *
271  * On X8664 this does not use interrupt stacks as they can't work before
272  * cpu_init() is invoked and sets up TSS. The IST variant is installed
273  * after that.
274  *
275  * Note, that X86_64 cannot install the real #PF handler in
276  * idt_setup_early_traps() because the memory intialization needs the #PF
277  * handler from the early_idt_handler_array to initialize the early page
278  * tables.
279  */
280 void __init idt_setup_early_pf(void)
281 {
282 	idt_setup_from_table(idt_table, early_pf_idts,
283 			     ARRAY_SIZE(early_pf_idts), true);
284 }
285 
286 /**
287  * idt_setup_ist_traps - Initialize the idt table with traps using IST
288  */
289 void __init idt_setup_ist_traps(void)
290 {
291 	idt_setup_from_table(idt_table, ist_idts, ARRAY_SIZE(ist_idts), true);
292 }
293 #endif
294 
295 static void __init idt_map_in_cea(void)
296 {
297 	/*
298 	 * Set the IDT descriptor to a fixed read-only location in the cpu
299 	 * entry area, so that the "sidt" instruction will not leak the
300 	 * location of the kernel, and to defend the IDT against arbitrary
301 	 * memory write vulnerabilities.
302 	 */
303 	cea_set_pte(CPU_ENTRY_AREA_RO_IDT_VADDR, __pa_symbol(idt_table),
304 		    PAGE_KERNEL_RO);
305 	idt_descr.address = CPU_ENTRY_AREA_RO_IDT;
306 }
307 
308 /**
309  * idt_setup_apic_and_irq_gates - Setup APIC/SMP and normal interrupt gates
310  */
311 void __init idt_setup_apic_and_irq_gates(void)
312 {
313 	int i = FIRST_EXTERNAL_VECTOR;
314 	void *entry;
315 
316 	idt_setup_from_table(idt_table, apic_idts, ARRAY_SIZE(apic_idts), true);
317 
318 	for_each_clear_bit_from(i, system_vectors, FIRST_SYSTEM_VECTOR) {
319 		entry = irq_entries_start + 8 * (i - FIRST_EXTERNAL_VECTOR);
320 		set_intr_gate(i, entry);
321 	}
322 
323 #ifdef CONFIG_X86_LOCAL_APIC
324 	for_each_clear_bit_from(i, system_vectors, NR_VECTORS) {
325 		/*
326 		 * Don't set the non assigned system vectors in the
327 		 * system_vectors bitmap. Otherwise they show up in
328 		 * /proc/interrupts.
329 		 */
330 		entry = spurious_entries_start + 8 * (i - FIRST_SYSTEM_VECTOR);
331 		set_intr_gate(i, entry);
332 	}
333 #endif
334 	/* Map IDT into CPU entry area and reload it. */
335 	idt_map_in_cea();
336 	load_idt(&idt_descr);
337 
338 	/* Make the IDT table read only */
339 	set_memory_ro((unsigned long)&idt_table, 1);
340 
341 	idt_setup_done = true;
342 }
343 
344 /**
345  * idt_setup_early_handler - Initializes the idt table with early handlers
346  */
347 void __init idt_setup_early_handler(void)
348 {
349 	int i;
350 
351 	for (i = 0; i < NUM_EXCEPTION_VECTORS; i++)
352 		set_intr_gate(i, early_idt_handler_array[i]);
353 #ifdef CONFIG_X86_32
354 	for ( ; i < NR_VECTORS; i++)
355 		set_intr_gate(i, early_ignore_irq);
356 #endif
357 	load_idt(&idt_descr);
358 }
359 
360 /**
361  * idt_invalidate - Invalidate interrupt descriptor table
362  * @addr:	The virtual address of the 'invalid' IDT
363  */
364 void idt_invalidate(void *addr)
365 {
366 	struct desc_ptr idt = { .address = (unsigned long) addr, .size = 0 };
367 
368 	load_idt(&idt);
369 }
370 
371 void __init alloc_intr_gate(unsigned int n, const void *addr)
372 {
373 	if (WARN_ON(n < FIRST_SYSTEM_VECTOR))
374 		return;
375 
376 	if (WARN_ON(idt_setup_done))
377 		return;
378 
379 	if (!WARN_ON(test_and_set_bit(n, system_vectors)))
380 		set_intr_gate(n, addr);
381 }
382