xref: /openbmc/linux/arch/x86/kernel/i8259.c (revision 79f08d9e)
1 #include <linux/linkage.h>
2 #include <linux/errno.h>
3 #include <linux/signal.h>
4 #include <linux/sched.h>
5 #include <linux/ioport.h>
6 #include <linux/interrupt.h>
7 #include <linux/timex.h>
8 #include <linux/random.h>
9 #include <linux/init.h>
10 #include <linux/kernel_stat.h>
11 #include <linux/syscore_ops.h>
12 #include <linux/bitops.h>
13 #include <linux/acpi.h>
14 #include <linux/io.h>
15 #include <linux/delay.h>
16 
17 #include <linux/atomic.h>
18 #include <asm/timer.h>
19 #include <asm/hw_irq.h>
20 #include <asm/pgtable.h>
21 #include <asm/desc.h>
22 #include <asm/apic.h>
23 #include <asm/i8259.h>
24 
25 /*
26  * This is the 'legacy' 8259A Programmable Interrupt Controller,
27  * present in the majority of PC/AT boxes.
28  * plus some generic x86 specific things if generic specifics makes
29  * any sense at all.
30  */
31 static void init_8259A(int auto_eoi);
32 
33 static int i8259A_auto_eoi;
34 DEFINE_RAW_SPINLOCK(i8259A_lock);
35 
36 /*
37  * 8259A PIC functions to handle ISA devices:
38  */
39 
40 /*
41  * This contains the irq mask for both 8259A irq controllers,
42  */
43 unsigned int cached_irq_mask = 0xffff;
44 
45 /*
46  * Not all IRQs can be routed through the IO-APIC, eg. on certain (older)
47  * boards the timer interrupt is not really connected to any IO-APIC pin,
48  * it's fed to the master 8259A's IR0 line only.
49  *
50  * Any '1' bit in this mask means the IRQ is routed through the IO-APIC.
51  * this 'mixed mode' IRQ handling costs nothing because it's only used
52  * at IRQ setup time.
53  */
54 unsigned long io_apic_irqs;
55 
56 static void mask_8259A_irq(unsigned int irq)
57 {
58 	unsigned int mask = 1 << irq;
59 	unsigned long flags;
60 
61 	raw_spin_lock_irqsave(&i8259A_lock, flags);
62 	cached_irq_mask |= mask;
63 	if (irq & 8)
64 		outb(cached_slave_mask, PIC_SLAVE_IMR);
65 	else
66 		outb(cached_master_mask, PIC_MASTER_IMR);
67 	raw_spin_unlock_irqrestore(&i8259A_lock, flags);
68 }
69 
70 static void disable_8259A_irq(struct irq_data *data)
71 {
72 	mask_8259A_irq(data->irq);
73 }
74 
75 static void unmask_8259A_irq(unsigned int irq)
76 {
77 	unsigned int mask = ~(1 << irq);
78 	unsigned long flags;
79 
80 	raw_spin_lock_irqsave(&i8259A_lock, flags);
81 	cached_irq_mask &= mask;
82 	if (irq & 8)
83 		outb(cached_slave_mask, PIC_SLAVE_IMR);
84 	else
85 		outb(cached_master_mask, PIC_MASTER_IMR);
86 	raw_spin_unlock_irqrestore(&i8259A_lock, flags);
87 }
88 
89 static void enable_8259A_irq(struct irq_data *data)
90 {
91 	unmask_8259A_irq(data->irq);
92 }
93 
94 static int i8259A_irq_pending(unsigned int irq)
95 {
96 	unsigned int mask = 1<<irq;
97 	unsigned long flags;
98 	int ret;
99 
100 	raw_spin_lock_irqsave(&i8259A_lock, flags);
101 	if (irq < 8)
102 		ret = inb(PIC_MASTER_CMD) & mask;
103 	else
104 		ret = inb(PIC_SLAVE_CMD) & (mask >> 8);
105 	raw_spin_unlock_irqrestore(&i8259A_lock, flags);
106 
107 	return ret;
108 }
109 
110 static void make_8259A_irq(unsigned int irq)
111 {
112 	disable_irq_nosync(irq);
113 	io_apic_irqs &= ~(1<<irq);
114 	irq_set_chip_and_handler_name(irq, &i8259A_chip, handle_level_irq,
115 				      i8259A_chip.name);
116 	enable_irq(irq);
117 }
118 
119 /*
120  * This function assumes to be called rarely. Switching between
121  * 8259A registers is slow.
122  * This has to be protected by the irq controller spinlock
123  * before being called.
124  */
125 static inline int i8259A_irq_real(unsigned int irq)
126 {
127 	int value;
128 	int irqmask = 1<<irq;
129 
130 	if (irq < 8) {
131 		outb(0x0B, PIC_MASTER_CMD);	/* ISR register */
132 		value = inb(PIC_MASTER_CMD) & irqmask;
133 		outb(0x0A, PIC_MASTER_CMD);	/* back to the IRR register */
134 		return value;
135 	}
136 	outb(0x0B, PIC_SLAVE_CMD);	/* ISR register */
137 	value = inb(PIC_SLAVE_CMD) & (irqmask >> 8);
138 	outb(0x0A, PIC_SLAVE_CMD);	/* back to the IRR register */
139 	return value;
140 }
141 
142 /*
143  * Careful! The 8259A is a fragile beast, it pretty
144  * much _has_ to be done exactly like this (mask it
145  * first, _then_ send the EOI, and the order of EOI
146  * to the two 8259s is important!
147  */
148 static void mask_and_ack_8259A(struct irq_data *data)
149 {
150 	unsigned int irq = data->irq;
151 	unsigned int irqmask = 1 << irq;
152 	unsigned long flags;
153 
154 	raw_spin_lock_irqsave(&i8259A_lock, flags);
155 	/*
156 	 * Lightweight spurious IRQ detection. We do not want
157 	 * to overdo spurious IRQ handling - it's usually a sign
158 	 * of hardware problems, so we only do the checks we can
159 	 * do without slowing down good hardware unnecessarily.
160 	 *
161 	 * Note that IRQ7 and IRQ15 (the two spurious IRQs
162 	 * usually resulting from the 8259A-1|2 PICs) occur
163 	 * even if the IRQ is masked in the 8259A. Thus we
164 	 * can check spurious 8259A IRQs without doing the
165 	 * quite slow i8259A_irq_real() call for every IRQ.
166 	 * This does not cover 100% of spurious interrupts,
167 	 * but should be enough to warn the user that there
168 	 * is something bad going on ...
169 	 */
170 	if (cached_irq_mask & irqmask)
171 		goto spurious_8259A_irq;
172 	cached_irq_mask |= irqmask;
173 
174 handle_real_irq:
175 	if (irq & 8) {
176 		inb(PIC_SLAVE_IMR);	/* DUMMY - (do we need this?) */
177 		outb(cached_slave_mask, PIC_SLAVE_IMR);
178 		/* 'Specific EOI' to slave */
179 		outb(0x60+(irq&7), PIC_SLAVE_CMD);
180 		 /* 'Specific EOI' to master-IRQ2 */
181 		outb(0x60+PIC_CASCADE_IR, PIC_MASTER_CMD);
182 	} else {
183 		inb(PIC_MASTER_IMR);	/* DUMMY - (do we need this?) */
184 		outb(cached_master_mask, PIC_MASTER_IMR);
185 		outb(0x60+irq, PIC_MASTER_CMD);	/* 'Specific EOI to master */
186 	}
187 	raw_spin_unlock_irqrestore(&i8259A_lock, flags);
188 	return;
189 
190 spurious_8259A_irq:
191 	/*
192 	 * this is the slow path - should happen rarely.
193 	 */
194 	if (i8259A_irq_real(irq))
195 		/*
196 		 * oops, the IRQ _is_ in service according to the
197 		 * 8259A - not spurious, go handle it.
198 		 */
199 		goto handle_real_irq;
200 
201 	{
202 		static int spurious_irq_mask;
203 		/*
204 		 * At this point we can be sure the IRQ is spurious,
205 		 * lets ACK and report it. [once per IRQ]
206 		 */
207 		if (!(spurious_irq_mask & irqmask)) {
208 			printk(KERN_DEBUG
209 			       "spurious 8259A interrupt: IRQ%d.\n", irq);
210 			spurious_irq_mask |= irqmask;
211 		}
212 		atomic_inc(&irq_err_count);
213 		/*
214 		 * Theoretically we do not have to handle this IRQ,
215 		 * but in Linux this does not cause problems and is
216 		 * simpler for us.
217 		 */
218 		goto handle_real_irq;
219 	}
220 }
221 
222 struct irq_chip i8259A_chip = {
223 	.name		= "XT-PIC",
224 	.irq_mask	= disable_8259A_irq,
225 	.irq_disable	= disable_8259A_irq,
226 	.irq_unmask	= enable_8259A_irq,
227 	.irq_mask_ack	= mask_and_ack_8259A,
228 };
229 
230 static char irq_trigger[2];
231 /**
232  * ELCR registers (0x4d0, 0x4d1) control edge/level of IRQ
233  */
234 static void restore_ELCR(char *trigger)
235 {
236 	outb(trigger[0], 0x4d0);
237 	outb(trigger[1], 0x4d1);
238 }
239 
240 static void save_ELCR(char *trigger)
241 {
242 	/* IRQ 0,1,2,8,13 are marked as reserved */
243 	trigger[0] = inb(0x4d0) & 0xF8;
244 	trigger[1] = inb(0x4d1) & 0xDE;
245 }
246 
247 static void i8259A_resume(void)
248 {
249 	init_8259A(i8259A_auto_eoi);
250 	restore_ELCR(irq_trigger);
251 }
252 
253 static int i8259A_suspend(void)
254 {
255 	save_ELCR(irq_trigger);
256 	return 0;
257 }
258 
259 static void i8259A_shutdown(void)
260 {
261 	/* Put the i8259A into a quiescent state that
262 	 * the kernel initialization code can get it
263 	 * out of.
264 	 */
265 	outb(0xff, PIC_MASTER_IMR);	/* mask all of 8259A-1 */
266 	outb(0xff, PIC_SLAVE_IMR);	/* mask all of 8259A-2 */
267 }
268 
269 static struct syscore_ops i8259_syscore_ops = {
270 	.suspend = i8259A_suspend,
271 	.resume = i8259A_resume,
272 	.shutdown = i8259A_shutdown,
273 };
274 
275 static void mask_8259A(void)
276 {
277 	unsigned long flags;
278 
279 	raw_spin_lock_irqsave(&i8259A_lock, flags);
280 
281 	outb(0xff, PIC_MASTER_IMR);	/* mask all of 8259A-1 */
282 	outb(0xff, PIC_SLAVE_IMR);	/* mask all of 8259A-2 */
283 
284 	raw_spin_unlock_irqrestore(&i8259A_lock, flags);
285 }
286 
287 static void unmask_8259A(void)
288 {
289 	unsigned long flags;
290 
291 	raw_spin_lock_irqsave(&i8259A_lock, flags);
292 
293 	outb(cached_master_mask, PIC_MASTER_IMR); /* restore master IRQ mask */
294 	outb(cached_slave_mask, PIC_SLAVE_IMR);	  /* restore slave IRQ mask */
295 
296 	raw_spin_unlock_irqrestore(&i8259A_lock, flags);
297 }
298 
299 static void init_8259A(int auto_eoi)
300 {
301 	unsigned long flags;
302 
303 	i8259A_auto_eoi = auto_eoi;
304 
305 	raw_spin_lock_irqsave(&i8259A_lock, flags);
306 
307 	outb(0xff, PIC_MASTER_IMR);	/* mask all of 8259A-1 */
308 	outb(0xff, PIC_SLAVE_IMR);	/* mask all of 8259A-2 */
309 
310 	/*
311 	 * outb_pic - this has to work on a wide range of PC hardware.
312 	 */
313 	outb_pic(0x11, PIC_MASTER_CMD);	/* ICW1: select 8259A-1 init */
314 
315 	/* ICW2: 8259A-1 IR0-7 mapped to 0x30-0x37 */
316 	outb_pic(IRQ0_VECTOR, PIC_MASTER_IMR);
317 
318 	/* 8259A-1 (the master) has a slave on IR2 */
319 	outb_pic(1U << PIC_CASCADE_IR, PIC_MASTER_IMR);
320 
321 	if (auto_eoi)	/* master does Auto EOI */
322 		outb_pic(MASTER_ICW4_DEFAULT | PIC_ICW4_AEOI, PIC_MASTER_IMR);
323 	else		/* master expects normal EOI */
324 		outb_pic(MASTER_ICW4_DEFAULT, PIC_MASTER_IMR);
325 
326 	outb_pic(0x11, PIC_SLAVE_CMD);	/* ICW1: select 8259A-2 init */
327 
328 	/* ICW2: 8259A-2 IR0-7 mapped to IRQ8_VECTOR */
329 	outb_pic(IRQ8_VECTOR, PIC_SLAVE_IMR);
330 	/* 8259A-2 is a slave on master's IR2 */
331 	outb_pic(PIC_CASCADE_IR, PIC_SLAVE_IMR);
332 	/* (slave's support for AEOI in flat mode is to be investigated) */
333 	outb_pic(SLAVE_ICW4_DEFAULT, PIC_SLAVE_IMR);
334 
335 	if (auto_eoi)
336 		/*
337 		 * In AEOI mode we just have to mask the interrupt
338 		 * when acking.
339 		 */
340 		i8259A_chip.irq_mask_ack = disable_8259A_irq;
341 	else
342 		i8259A_chip.irq_mask_ack = mask_and_ack_8259A;
343 
344 	udelay(100);		/* wait for 8259A to initialize */
345 
346 	outb(cached_master_mask, PIC_MASTER_IMR); /* restore master IRQ mask */
347 	outb(cached_slave_mask, PIC_SLAVE_IMR);	  /* restore slave IRQ mask */
348 
349 	raw_spin_unlock_irqrestore(&i8259A_lock, flags);
350 }
351 
352 /*
353  * make i8259 a driver so that we can select pic functions at run time. the goal
354  * is to make x86 binary compatible among pc compatible and non-pc compatible
355  * platforms, such as x86 MID.
356  */
357 
358 static void legacy_pic_noop(void) { };
359 static void legacy_pic_uint_noop(unsigned int unused) { };
360 static void legacy_pic_int_noop(int unused) { };
361 static int legacy_pic_irq_pending_noop(unsigned int irq)
362 {
363 	return 0;
364 }
365 
366 struct legacy_pic null_legacy_pic = {
367 	.nr_legacy_irqs = 0,
368 	.chip = &dummy_irq_chip,
369 	.mask = legacy_pic_uint_noop,
370 	.unmask = legacy_pic_uint_noop,
371 	.mask_all = legacy_pic_noop,
372 	.restore_mask = legacy_pic_noop,
373 	.init = legacy_pic_int_noop,
374 	.irq_pending = legacy_pic_irq_pending_noop,
375 	.make_irq = legacy_pic_uint_noop,
376 };
377 
378 struct legacy_pic default_legacy_pic = {
379 	.nr_legacy_irqs = NR_IRQS_LEGACY,
380 	.chip  = &i8259A_chip,
381 	.mask = mask_8259A_irq,
382 	.unmask = unmask_8259A_irq,
383 	.mask_all = mask_8259A,
384 	.restore_mask = unmask_8259A,
385 	.init = init_8259A,
386 	.irq_pending = i8259A_irq_pending,
387 	.make_irq = make_8259A_irq,
388 };
389 
390 struct legacy_pic *legacy_pic = &default_legacy_pic;
391 
392 static int __init i8259A_init_ops(void)
393 {
394 	if (legacy_pic == &default_legacy_pic)
395 		register_syscore_ops(&i8259_syscore_ops);
396 
397 	return 0;
398 }
399 
400 device_initcall(i8259A_init_ops);
401