xref: /openbmc/linux/arch/x86/kernel/ebda.c (revision 50fdda70)
1 #include <linux/kernel.h>
2 #include <linux/init.h>
3 #include <linux/memblock.h>
4 
5 #include <asm/setup.h>
6 #include <asm/bios_ebda.h>
7 
8 /*
9  * The BIOS places the EBDA/XBDA at the top of conventional
10  * memory, and usually decreases the reported amount of
11  * conventional memory (int 0x12) too. This also contains a
12  * workaround for Dell systems that neglect to reserve EBDA.
13  * The same workaround also avoids a problem with the AMD768MPX
14  * chipset: reserve a page before VGA to prevent PCI prefetch
15  * into it (errata #56). Usually the page is reserved anyways,
16  * unless you have no PS/2 mouse plugged in.
17  *
18  * This functions is deliberately very conservative.  Losing
19  * memory in the bottom megabyte is rarely a problem, as long
20  * as we have enough memory to install the trampoline.  Using
21  * memory that is in use by the BIOS or by some DMA device
22  * the BIOS didn't shut down *is* a big problem.
23  */
24 
25 #define BIOS_LOWMEM_KILOBYTES	0x413
26 #define LOWMEM_CAP		0x9f000U	/* Absolute maximum */
27 #define INSANE_CUTOFF		0x20000U	/* Less than this = insane */
28 
29 void __init reserve_ebda_region(void)
30 {
31 	unsigned int lowmem, ebda_addr;
32 
33 	/*
34 	 * To determine the position of the EBDA and the
35 	 * end of conventional memory, we need to look at
36 	 * the BIOS data area. In a paravirtual environment
37 	 * that area is absent. We'll just have to assume
38 	 * that the paravirt case can handle memory setup
39 	 * correctly, without our help.
40 	 */
41 	if (!x86_platform.legacy.ebda_search)
42 		return;
43 
44 	/* end of low (conventional) memory */
45 	lowmem = *(unsigned short *)__va(BIOS_LOWMEM_KILOBYTES);
46 	lowmem <<= 10;
47 
48 	/* start of EBDA area */
49 	ebda_addr = get_bios_ebda();
50 
51 	/*
52 	 * Note: some old Dells seem to need 4k EBDA without
53 	 * reporting so, so just consider the memory above 0x9f000
54 	 * to be off limits (bugzilla 2990).
55 	 */
56 
57 	/* If the EBDA address is below 128K, assume it is bogus */
58 	if (ebda_addr < INSANE_CUTOFF)
59 		ebda_addr = LOWMEM_CAP;
60 
61 	/* If lowmem is less than 128K, assume it is bogus */
62 	if (lowmem < INSANE_CUTOFF)
63 		lowmem = LOWMEM_CAP;
64 
65 	/* Use the lower of the lowmem and EBDA markers as the cutoff */
66 	lowmem = min(lowmem, ebda_addr);
67 	lowmem = min(lowmem, LOWMEM_CAP); /* Absolute cap */
68 
69 	/* reserve all memory between lowmem and the 1MB mark */
70 	memblock_reserve(lowmem, 0x100000 - lowmem);
71 }
72