1 // SPDX-License-Identifier: GPL-2.0+ 2 /* 3 * Hygon Processor Support for Linux 4 * 5 * Copyright (C) 2018 Chengdu Haiguang IC Design Co., Ltd. 6 * 7 * Author: Pu Wen <puwen@hygon.cn> 8 */ 9 #include <linux/io.h> 10 11 #include <asm/cpu.h> 12 #include <asm/smp.h> 13 #include <asm/cacheinfo.h> 14 #include <asm/spec-ctrl.h> 15 #include <asm/delay.h> 16 #ifdef CONFIG_X86_64 17 # include <asm/set_memory.h> 18 #endif 19 20 #include "cpu.h" 21 22 #define APICID_SOCKET_ID_BIT 6 23 24 /* 25 * nodes_per_socket: Stores the number of nodes per socket. 26 * Refer to CPUID Fn8000_001E_ECX Node Identifiers[10:8] 27 */ 28 static u32 nodes_per_socket = 1; 29 30 #ifdef CONFIG_NUMA 31 /* 32 * To workaround broken NUMA config. Read the comment in 33 * srat_detect_node(). 34 */ 35 static int nearby_node(int apicid) 36 { 37 int i, node; 38 39 for (i = apicid - 1; i >= 0; i--) { 40 node = __apicid_to_node[i]; 41 if (node != NUMA_NO_NODE && node_online(node)) 42 return node; 43 } 44 for (i = apicid + 1; i < MAX_LOCAL_APIC; i++) { 45 node = __apicid_to_node[i]; 46 if (node != NUMA_NO_NODE && node_online(node)) 47 return node; 48 } 49 return first_node(node_online_map); /* Shouldn't happen */ 50 } 51 #endif 52 53 static void hygon_get_topology_early(struct cpuinfo_x86 *c) 54 { 55 if (cpu_has(c, X86_FEATURE_TOPOEXT)) 56 smp_num_siblings = ((cpuid_ebx(0x8000001e) >> 8) & 0xff) + 1; 57 } 58 59 /* 60 * Fixup core topology information for 61 * (1) Hygon multi-node processors 62 * Assumption: Number of cores in each internal node is the same. 63 * (2) Hygon processors supporting compute units 64 */ 65 static void hygon_get_topology(struct cpuinfo_x86 *c) 66 { 67 u8 node_id; 68 int cpu = smp_processor_id(); 69 70 /* get information required for multi-node processors */ 71 if (boot_cpu_has(X86_FEATURE_TOPOEXT)) { 72 int err; 73 u32 eax, ebx, ecx, edx; 74 75 cpuid(0x8000001e, &eax, &ebx, &ecx, &edx); 76 77 node_id = ecx & 0xff; 78 79 c->cpu_core_id = ebx & 0xff; 80 81 if (smp_num_siblings > 1) 82 c->x86_max_cores /= smp_num_siblings; 83 84 /* 85 * In case leaf B is available, use it to derive 86 * topology information. 87 */ 88 err = detect_extended_topology(c); 89 if (!err) 90 c->x86_coreid_bits = get_count_order(c->x86_max_cores); 91 92 /* Socket ID is ApicId[6] for these processors. */ 93 c->phys_proc_id = c->apicid >> APICID_SOCKET_ID_BIT; 94 95 cacheinfo_hygon_init_llc_id(c, cpu, node_id); 96 } else if (cpu_has(c, X86_FEATURE_NODEID_MSR)) { 97 u64 value; 98 99 rdmsrl(MSR_FAM10H_NODE_ID, value); 100 node_id = value & 7; 101 102 per_cpu(cpu_llc_id, cpu) = node_id; 103 } else 104 return; 105 106 if (nodes_per_socket > 1) 107 set_cpu_cap(c, X86_FEATURE_AMD_DCM); 108 } 109 110 /* 111 * On Hygon setup the lower bits of the APIC id distinguish the cores. 112 * Assumes number of cores is a power of two. 113 */ 114 static void hygon_detect_cmp(struct cpuinfo_x86 *c) 115 { 116 unsigned int bits; 117 int cpu = smp_processor_id(); 118 119 bits = c->x86_coreid_bits; 120 /* Low order bits define the core id (index of core in socket) */ 121 c->cpu_core_id = c->initial_apicid & ((1 << bits)-1); 122 /* Convert the initial APIC ID into the socket ID */ 123 c->phys_proc_id = c->initial_apicid >> bits; 124 /* use socket ID also for last level cache */ 125 per_cpu(cpu_llc_id, cpu) = c->phys_proc_id; 126 } 127 128 static void srat_detect_node(struct cpuinfo_x86 *c) 129 { 130 #ifdef CONFIG_NUMA 131 int cpu = smp_processor_id(); 132 int node; 133 unsigned int apicid = c->apicid; 134 135 node = numa_cpu_node(cpu); 136 if (node == NUMA_NO_NODE) 137 node = per_cpu(cpu_llc_id, cpu); 138 139 /* 140 * On multi-fabric platform (e.g. Numascale NumaChip) a 141 * platform-specific handler needs to be called to fixup some 142 * IDs of the CPU. 143 */ 144 if (x86_cpuinit.fixup_cpu_id) 145 x86_cpuinit.fixup_cpu_id(c, node); 146 147 if (!node_online(node)) { 148 /* 149 * Two possibilities here: 150 * 151 * - The CPU is missing memory and no node was created. In 152 * that case try picking one from a nearby CPU. 153 * 154 * - The APIC IDs differ from the HyperTransport node IDs. 155 * Assume they are all increased by a constant offset, but 156 * in the same order as the HT nodeids. If that doesn't 157 * result in a usable node fall back to the path for the 158 * previous case. 159 * 160 * This workaround operates directly on the mapping between 161 * APIC ID and NUMA node, assuming certain relationship 162 * between APIC ID, HT node ID and NUMA topology. As going 163 * through CPU mapping may alter the outcome, directly 164 * access __apicid_to_node[]. 165 */ 166 int ht_nodeid = c->initial_apicid; 167 168 if (__apicid_to_node[ht_nodeid] != NUMA_NO_NODE) 169 node = __apicid_to_node[ht_nodeid]; 170 /* Pick a nearby node */ 171 if (!node_online(node)) 172 node = nearby_node(apicid); 173 } 174 numa_set_node(cpu, node); 175 #endif 176 } 177 178 static void early_init_hygon_mc(struct cpuinfo_x86 *c) 179 { 180 #ifdef CONFIG_SMP 181 unsigned int bits, ecx; 182 183 /* Multi core CPU? */ 184 if (c->extended_cpuid_level < 0x80000008) 185 return; 186 187 ecx = cpuid_ecx(0x80000008); 188 189 c->x86_max_cores = (ecx & 0xff) + 1; 190 191 /* CPU telling us the core id bits shift? */ 192 bits = (ecx >> 12) & 0xF; 193 194 /* Otherwise recompute */ 195 if (bits == 0) { 196 while ((1 << bits) < c->x86_max_cores) 197 bits++; 198 } 199 200 c->x86_coreid_bits = bits; 201 #endif 202 } 203 204 static void bsp_init_hygon(struct cpuinfo_x86 *c) 205 { 206 #ifdef CONFIG_X86_64 207 unsigned long long tseg; 208 209 /* 210 * Split up direct mapping around the TSEG SMM area. 211 * Don't do it for gbpages because there seems very little 212 * benefit in doing so. 213 */ 214 if (!rdmsrl_safe(MSR_K8_TSEG_ADDR, &tseg)) { 215 unsigned long pfn = tseg >> PAGE_SHIFT; 216 217 pr_debug("tseg: %010llx\n", tseg); 218 if (pfn_range_is_mapped(pfn, pfn + 1)) 219 set_memory_4k((unsigned long)__va(tseg), 1); 220 } 221 #endif 222 223 if (cpu_has(c, X86_FEATURE_CONSTANT_TSC)) { 224 u64 val; 225 226 rdmsrl(MSR_K7_HWCR, val); 227 if (!(val & BIT(24))) 228 pr_warn(FW_BUG "TSC doesn't count with P0 frequency!\n"); 229 } 230 231 if (cpu_has(c, X86_FEATURE_MWAITX)) 232 use_mwaitx_delay(); 233 234 if (boot_cpu_has(X86_FEATURE_TOPOEXT)) { 235 u32 ecx; 236 237 ecx = cpuid_ecx(0x8000001e); 238 nodes_per_socket = ((ecx >> 8) & 7) + 1; 239 } else if (boot_cpu_has(X86_FEATURE_NODEID_MSR)) { 240 u64 value; 241 242 rdmsrl(MSR_FAM10H_NODE_ID, value); 243 nodes_per_socket = ((value >> 3) & 7) + 1; 244 } 245 246 if (!boot_cpu_has(X86_FEATURE_AMD_SSBD) && 247 !boot_cpu_has(X86_FEATURE_VIRT_SSBD)) { 248 /* 249 * Try to cache the base value so further operations can 250 * avoid RMW. If that faults, do not enable SSBD. 251 */ 252 if (!rdmsrl_safe(MSR_AMD64_LS_CFG, &x86_amd_ls_cfg_base)) { 253 setup_force_cpu_cap(X86_FEATURE_LS_CFG_SSBD); 254 setup_force_cpu_cap(X86_FEATURE_SSBD); 255 x86_amd_ls_cfg_ssbd_mask = 1ULL << 10; 256 } 257 } 258 } 259 260 static void early_init_hygon(struct cpuinfo_x86 *c) 261 { 262 u32 dummy; 263 264 early_init_hygon_mc(c); 265 266 set_cpu_cap(c, X86_FEATURE_K8); 267 268 rdmsr_safe(MSR_AMD64_PATCH_LEVEL, &c->microcode, &dummy); 269 270 /* 271 * c->x86_power is 8000_0007 edx. Bit 8 is TSC runs at constant rate 272 * with P/T states and does not stop in deep C-states 273 */ 274 if (c->x86_power & (1 << 8)) { 275 set_cpu_cap(c, X86_FEATURE_CONSTANT_TSC); 276 set_cpu_cap(c, X86_FEATURE_NONSTOP_TSC); 277 } 278 279 /* Bit 12 of 8000_0007 edx is accumulated power mechanism. */ 280 if (c->x86_power & BIT(12)) 281 set_cpu_cap(c, X86_FEATURE_ACC_POWER); 282 283 #ifdef CONFIG_X86_64 284 set_cpu_cap(c, X86_FEATURE_SYSCALL32); 285 #endif 286 287 #if defined(CONFIG_X86_LOCAL_APIC) && defined(CONFIG_PCI) 288 /* 289 * ApicID can always be treated as an 8-bit value for Hygon APIC So, we 290 * can safely set X86_FEATURE_EXTD_APICID unconditionally. 291 */ 292 if (boot_cpu_has(X86_FEATURE_APIC)) 293 set_cpu_cap(c, X86_FEATURE_EXTD_APICID); 294 #endif 295 296 /* 297 * This is only needed to tell the kernel whether to use VMCALL 298 * and VMMCALL. VMMCALL is never executed except under virt, so 299 * we can set it unconditionally. 300 */ 301 set_cpu_cap(c, X86_FEATURE_VMMCALL); 302 303 hygon_get_topology_early(c); 304 } 305 306 static void init_hygon(struct cpuinfo_x86 *c) 307 { 308 early_init_hygon(c); 309 310 /* 311 * Bit 31 in normal CPUID used for nonstandard 3DNow ID; 312 * 3DNow is IDd by bit 31 in extended CPUID (1*32+31) anyway 313 */ 314 clear_cpu_cap(c, 0*32+31); 315 316 set_cpu_cap(c, X86_FEATURE_REP_GOOD); 317 318 /* get apicid instead of initial apic id from cpuid */ 319 c->apicid = hard_smp_processor_id(); 320 321 set_cpu_cap(c, X86_FEATURE_ZEN); 322 set_cpu_cap(c, X86_FEATURE_CPB); 323 324 cpu_detect_cache_sizes(c); 325 326 hygon_detect_cmp(c); 327 hygon_get_topology(c); 328 srat_detect_node(c); 329 330 init_hygon_cacheinfo(c); 331 332 if (cpu_has(c, X86_FEATURE_XMM2)) { 333 /* 334 * Use LFENCE for execution serialization. On families which 335 * don't have that MSR, LFENCE is already serializing. 336 * msr_set_bit() uses the safe accessors, too, even if the MSR 337 * is not present. 338 */ 339 msr_set_bit(MSR_F10H_DECFG, 340 MSR_F10H_DECFG_LFENCE_SERIALIZE_BIT); 341 342 /* A serializing LFENCE stops RDTSC speculation */ 343 set_cpu_cap(c, X86_FEATURE_LFENCE_RDTSC); 344 } 345 346 /* 347 * Hygon processors have APIC timer running in deep C states. 348 */ 349 set_cpu_cap(c, X86_FEATURE_ARAT); 350 351 /* Hygon CPUs don't reset SS attributes on SYSRET, Xen does. */ 352 if (!cpu_has(c, X86_FEATURE_XENPV)) 353 set_cpu_bug(c, X86_BUG_SYSRET_SS_ATTRS); 354 } 355 356 static void cpu_detect_tlb_hygon(struct cpuinfo_x86 *c) 357 { 358 u32 ebx, eax, ecx, edx; 359 u16 mask = 0xfff; 360 361 if (c->extended_cpuid_level < 0x80000006) 362 return; 363 364 cpuid(0x80000006, &eax, &ebx, &ecx, &edx); 365 366 tlb_lld_4k[ENTRIES] = (ebx >> 16) & mask; 367 tlb_lli_4k[ENTRIES] = ebx & mask; 368 369 /* Handle DTLB 2M and 4M sizes, fall back to L1 if L2 is disabled */ 370 if (!((eax >> 16) & mask)) 371 tlb_lld_2m[ENTRIES] = (cpuid_eax(0x80000005) >> 16) & 0xff; 372 else 373 tlb_lld_2m[ENTRIES] = (eax >> 16) & mask; 374 375 /* a 4M entry uses two 2M entries */ 376 tlb_lld_4m[ENTRIES] = tlb_lld_2m[ENTRIES] >> 1; 377 378 /* Handle ITLB 2M and 4M sizes, fall back to L1 if L2 is disabled */ 379 if (!(eax & mask)) { 380 cpuid(0x80000005, &eax, &ebx, &ecx, &edx); 381 tlb_lli_2m[ENTRIES] = eax & 0xff; 382 } else 383 tlb_lli_2m[ENTRIES] = eax & mask; 384 385 tlb_lli_4m[ENTRIES] = tlb_lli_2m[ENTRIES] >> 1; 386 } 387 388 static const struct cpu_dev hygon_cpu_dev = { 389 .c_vendor = "Hygon", 390 .c_ident = { "HygonGenuine" }, 391 .c_early_init = early_init_hygon, 392 .c_detect_tlb = cpu_detect_tlb_hygon, 393 .c_bsp_init = bsp_init_hygon, 394 .c_init = init_hygon, 395 .c_x86_vendor = X86_VENDOR_HYGON, 396 }; 397 398 cpu_dev_register(hygon_cpu_dev); 399