1 // SPDX-License-Identifier: GPL-2.0-or-later 2 /* -*- linux-c -*- 3 * APM BIOS driver for Linux 4 * Copyright 1994-2001 Stephen Rothwell (sfr@canb.auug.org.au) 5 * 6 * Initial development of this driver was funded by NEC Australia P/L 7 * and NEC Corporation 8 * 9 * October 1995, Rik Faith (faith@cs.unc.edu): 10 * Minor enhancements and updates (to the patch set) for 1.3.x 11 * Documentation 12 * January 1996, Rik Faith (faith@cs.unc.edu): 13 * Make /proc/apm easy to format (bump driver version) 14 * March 1996, Rik Faith (faith@cs.unc.edu): 15 * Prohibit APM BIOS calls unless apm_enabled. 16 * (Thanks to Ulrich Windl <Ulrich.Windl@rz.uni-regensburg.de>) 17 * April 1996, Stephen Rothwell (sfr@canb.auug.org.au) 18 * Version 1.0 and 1.1 19 * May 1996, Version 1.2 20 * Feb 1998, Version 1.3 21 * Feb 1998, Version 1.4 22 * Aug 1998, Version 1.5 23 * Sep 1998, Version 1.6 24 * Nov 1998, Version 1.7 25 * Jan 1999, Version 1.8 26 * Jan 1999, Version 1.9 27 * Oct 1999, Version 1.10 28 * Nov 1999, Version 1.11 29 * Jan 2000, Version 1.12 30 * Feb 2000, Version 1.13 31 * Nov 2000, Version 1.14 32 * Oct 2001, Version 1.15 33 * Jan 2002, Version 1.16 34 * Oct 2002, Version 1.16ac 35 * 36 * History: 37 * 0.6b: first version in official kernel, Linux 1.3.46 38 * 0.7: changed /proc/apm format, Linux 1.3.58 39 * 0.8: fixed gcc 2.7.[12] compilation problems, Linux 1.3.59 40 * 0.9: only call bios if bios is present, Linux 1.3.72 41 * 1.0: use fixed device number, consolidate /proc/apm into this file, 42 * Linux 1.3.85 43 * 1.1: support user-space standby and suspend, power off after system 44 * halted, Linux 1.3.98 45 * 1.2: When resetting RTC after resume, take care so that the time 46 * is only incorrect by 30-60mS (vs. 1S previously) (Gabor J. Toth 47 * <jtoth@princeton.edu>); improve interaction between 48 * screen-blanking and gpm (Stephen Rothwell); Linux 1.99.4 49 * 1.2a:Simple change to stop mysterious bug reports with SMP also added 50 * levels to the printk calls. APM is not defined for SMP machines. 51 * The new replacement for it is, but Linux doesn't yet support this. 52 * Alan Cox Linux 2.1.55 53 * 1.3: Set up a valid data descriptor 0x40 for buggy BIOS's 54 * 1.4: Upgraded to support APM 1.2. Integrated ThinkPad suspend patch by 55 * Dean Gaudet <dgaudet@arctic.org>. 56 * C. Scott Ananian <cananian@alumni.princeton.edu> Linux 2.1.87 57 * 1.5: Fix segment register reloading (in case of bad segments saved 58 * across BIOS call). 59 * Stephen Rothwell 60 * 1.6: Cope with compiler/assembler differences. 61 * Only try to turn off the first display device. 62 * Fix OOPS at power off with no APM BIOS by Jan Echternach 63 * <echter@informatik.uni-rostock.de> 64 * Stephen Rothwell 65 * 1.7: Modify driver's cached copy of the disabled/disengaged flags 66 * to reflect current state of APM BIOS. 67 * Chris Rankin <rankinc@bellsouth.net> 68 * Reset interrupt 0 timer to 100Hz after suspend 69 * Chad Miller <cmiller@surfsouth.com> 70 * Add CONFIG_APM_IGNORE_SUSPEND_BOUNCE 71 * Richard Gooch <rgooch@atnf.csiro.au> 72 * Allow boot time disabling of APM 73 * Make boot messages far less verbose by default 74 * Make asm safer 75 * Stephen Rothwell 76 * 1.8: Add CONFIG_APM_RTC_IS_GMT 77 * Richard Gooch <rgooch@atnf.csiro.au> 78 * change APM_NOINTS to CONFIG_APM_ALLOW_INTS 79 * remove dependency on CONFIG_PROC_FS 80 * Stephen Rothwell 81 * 1.9: Fix small typo. <laslo@wodip.opole.pl> 82 * Try to cope with BIOS's that need to have all display 83 * devices blanked and not just the first one. 84 * Ross Paterson <ross@soi.city.ac.uk> 85 * Fix segment limit setting it has always been wrong as 86 * the segments needed to have byte granularity. 87 * Mark a few things __init. 88 * Add hack to allow power off of SMP systems by popular request. 89 * Use CONFIG_SMP instead of __SMP__ 90 * Ignore BOUNCES for three seconds. 91 * Stephen Rothwell 92 * 1.10: Fix for Thinkpad return code. 93 * Merge 2.2 and 2.3 drivers. 94 * Remove APM dependencies in arch/i386/kernel/process.c 95 * Remove APM dependencies in drivers/char/sysrq.c 96 * Reset time across standby. 97 * Allow more initialisation on SMP. 98 * Remove CONFIG_APM_POWER_OFF and make it boot time 99 * configurable (default on). 100 * Make debug only a boot time parameter (remove APM_DEBUG). 101 * Try to blank all devices on any error. 102 * 1.11: Remove APM dependencies in drivers/char/console.c 103 * Check nr_running to detect if we are idle (from 104 * Borislav Deianov <borislav@lix.polytechnique.fr>) 105 * Fix for bioses that don't zero the top part of the 106 * entrypoint offset (Mario Sitta <sitta@al.unipmn.it>) 107 * (reported by Panos Katsaloulis <teras@writeme.com>). 108 * Real mode power off patch (Walter Hofmann 109 * <Walter.Hofmann@physik.stud.uni-erlangen.de>). 110 * 1.12: Remove CONFIG_SMP as the compiler will optimize 111 * the code away anyway (smp_num_cpus == 1 in UP) 112 * noted by Artur Skawina <skawina@geocities.com>. 113 * Make power off under SMP work again. 114 * Fix thinko with initial engaging of BIOS. 115 * Make sure power off only happens on CPU 0 116 * (Paul "Rusty" Russell <rusty@rustcorp.com.au>). 117 * Do error notification to user mode if BIOS calls fail. 118 * Move entrypoint offset fix to ...boot/setup.S 119 * where it belongs (Cosmos <gis88564@cis.nctu.edu.tw>). 120 * Remove smp-power-off. SMP users must now specify 121 * "apm=power-off" on the kernel command line. Suggested 122 * by Jim Avera <jima@hal.com>, modified by Alan Cox 123 * <alan@lxorguk.ukuu.org.uk>. 124 * Register the /proc/apm entry even on SMP so that 125 * scripts that check for it before doing power off 126 * work (Jim Avera <jima@hal.com>). 127 * 1.13: Changes for new pm_ interfaces (Andy Henroid 128 * <andy_henroid@yahoo.com>). 129 * Modularize the code. 130 * Fix the Thinkpad (again) :-( (CONFIG_APM_IGNORE_MULTIPLE_SUSPENDS 131 * is now the way life works). 132 * Fix thinko in suspend() (wrong return). 133 * Notify drivers on critical suspend. 134 * Make kapmd absorb more idle time (Pavel Machek <pavel@ucw.cz> 135 * modified by sfr). 136 * Disable interrupts while we are suspended (Andy Henroid 137 * <andy_henroid@yahoo.com> fixed by sfr). 138 * Make power off work on SMP again (Tony Hoyle 139 * <tmh@magenta-logic.com> and <zlatko@iskon.hr>) modified by sfr. 140 * Remove CONFIG_APM_SUSPEND_BOUNCE. The bounce ignore 141 * interval is now configurable. 142 * 1.14: Make connection version persist across module unload/load. 143 * Enable and engage power management earlier. 144 * Disengage power management on module unload. 145 * Changed to use the sysrq-register hack for registering the 146 * power off function called by magic sysrq based upon discussions 147 * in irc://irc.openprojects.net/#kernelnewbies 148 * (Crutcher Dunnavant <crutcher+kernel@datastacks.com>). 149 * Make CONFIG_APM_REAL_MODE_POWER_OFF run time configurable. 150 * (Arjan van de Ven <arjanv@redhat.com>) modified by sfr. 151 * Work around byte swap bug in one of the Vaio's BIOS's 152 * (Marc Boucher <marc@mbsi.ca>). 153 * Exposed the disable flag to dmi so that we can handle known 154 * broken APM (Alan Cox <alan@lxorguk.ukuu.org.uk>). 155 * 1.14ac: If the BIOS says "I slowed the CPU down" then don't spin 156 * calling it - instead idle. (Alan Cox <alan@lxorguk.ukuu.org.uk>) 157 * If an APM idle fails log it and idle sensibly 158 * 1.15: Don't queue events to clients who open the device O_WRONLY. 159 * Don't expect replies from clients who open the device O_RDONLY. 160 * (Idea from Thomas Hood) 161 * Minor waitqueue cleanups. (John Fremlin <chief@bandits.org>) 162 * 1.16: Fix idle calling. (Andreas Steinmetz <ast@domdv.de> et al.) 163 * Notify listeners of standby or suspend events before notifying 164 * drivers. Return EBUSY to ioctl() if suspend is rejected. 165 * (Russell King <rmk@arm.linux.org.uk> and Thomas Hood) 166 * Ignore first resume after we generate our own resume event 167 * after a suspend (Thomas Hood) 168 * Daemonize now gets rid of our controlling terminal (sfr). 169 * CONFIG_APM_CPU_IDLE now just affects the default value of 170 * idle_threshold (sfr). 171 * Change name of kernel apm daemon (as it no longer idles) (sfr). 172 * 1.16ac: Fix up SMP support somewhat. You can now force SMP on and we 173 * make _all_ APM calls on the CPU#0. Fix unsafe sign bug. 174 * TODO: determine if its "boot CPU" or "CPU0" we want to lock to. 175 * 176 * APM 1.1 Reference: 177 * 178 * Intel Corporation, Microsoft Corporation. Advanced Power Management 179 * (APM) BIOS Interface Specification, Revision 1.1, September 1993. 180 * Intel Order Number 241704-001. Microsoft Part Number 781-110-X01. 181 * 182 * [This document is available free from Intel by calling 800.628.8686 (fax 183 * 916.356.6100) or 800.548.4725; or from 184 * http://www.microsoft.com/whdc/archive/amp_12.mspx It is also 185 * available from Microsoft by calling 206.882.8080.] 186 * 187 * APM 1.2 Reference: 188 * Intel Corporation, Microsoft Corporation. Advanced Power Management 189 * (APM) BIOS Interface Specification, Revision 1.2, February 1996. 190 * 191 * [This document is available from Microsoft at: 192 * http://www.microsoft.com/whdc/archive/amp_12.mspx] 193 */ 194 195 #define pr_fmt(fmt) "apm: " fmt 196 197 #include <linux/module.h> 198 199 #include <linux/poll.h> 200 #include <linux/types.h> 201 #include <linux/stddef.h> 202 #include <linux/timer.h> 203 #include <linux/fcntl.h> 204 #include <linux/slab.h> 205 #include <linux/stat.h> 206 #include <linux/proc_fs.h> 207 #include <linux/seq_file.h> 208 #include <linux/miscdevice.h> 209 #include <linux/apm_bios.h> 210 #include <linux/init.h> 211 #include <linux/time.h> 212 #include <linux/sched/signal.h> 213 #include <linux/sched/cputime.h> 214 #include <linux/pm.h> 215 #include <linux/capability.h> 216 #include <linux/device.h> 217 #include <linux/kernel.h> 218 #include <linux/freezer.h> 219 #include <linux/smp.h> 220 #include <linux/dmi.h> 221 #include <linux/suspend.h> 222 #include <linux/kthread.h> 223 #include <linux/jiffies.h> 224 #include <linux/acpi.h> 225 #include <linux/syscore_ops.h> 226 #include <linux/i8253.h> 227 #include <linux/cpuidle.h> 228 229 #include <linux/uaccess.h> 230 #include <asm/desc.h> 231 #include <asm/olpc.h> 232 #include <asm/paravirt.h> 233 #include <asm/reboot.h> 234 #include <asm/nospec-branch.h> 235 236 #if defined(CONFIG_APM_DISPLAY_BLANK) && defined(CONFIG_VT) 237 extern int (*console_blank_hook)(int); 238 #endif 239 240 /* 241 * The apm_bios device is one of the misc char devices. 242 * This is its minor number. 243 */ 244 #define APM_MINOR_DEV 134 245 246 /* 247 * Various options can be changed at boot time as follows: 248 * (We allow underscores for compatibility with the modules code) 249 * apm=on/off enable/disable APM 250 * [no-]allow[-_]ints allow interrupts during BIOS calls 251 * [no-]broken[-_]psr BIOS has a broken GetPowerStatus call 252 * [no-]realmode[-_]power[-_]off switch to real mode before 253 * powering off 254 * [no-]debug log some debugging messages 255 * [no-]power[-_]off power off on shutdown 256 * [no-]smp Use apm even on an SMP box 257 * bounce[-_]interval=<n> number of ticks to ignore suspend 258 * bounces 259 * idle[-_]threshold=<n> System idle percentage above which to 260 * make APM BIOS idle calls. Set it to 261 * 100 to disable. 262 * idle[-_]period=<n> Period (in 1/100s of a second) over 263 * which the idle percentage is 264 * calculated. 265 */ 266 267 /* KNOWN PROBLEM MACHINES: 268 * 269 * U: TI 4000M TravelMate: BIOS is *NOT* APM compliant 270 * [Confirmed by TI representative] 271 * ?: ACER 486DX4/75: uses dseg 0040, in violation of APM specification 272 * [Confirmed by BIOS disassembly] 273 * [This may work now ...] 274 * P: Toshiba 1950S: battery life information only gets updated after resume 275 * P: Midwest Micro Soundbook Elite DX2/66 monochrome: screen blanking 276 * broken in BIOS [Reported by Garst R. Reese <reese@isn.net>] 277 * ?: AcerNote-950: oops on reading /proc/apm - workaround is a WIP 278 * Neale Banks <neale@lowendale.com.au> December 2000 279 * 280 * Legend: U = unusable with APM patches 281 * P = partially usable with APM patches 282 */ 283 284 /* 285 * Define as 1 to make the driver always call the APM BIOS busy 286 * routine even if the clock was not reported as slowed by the 287 * idle routine. Otherwise, define as 0. 288 */ 289 #define ALWAYS_CALL_BUSY 1 290 291 /* 292 * Define to make the APM BIOS calls zero all data segment registers (so 293 * that an incorrect BIOS implementation will cause a kernel panic if it 294 * tries to write to arbitrary memory). 295 */ 296 #define APM_ZERO_SEGS 297 298 #include <asm/apm.h> 299 300 /* 301 * Define to re-initialize the interrupt 0 timer to 100 Hz after a suspend. 302 * This patched by Chad Miller <cmiller@surfsouth.com>, original code by 303 * David Chen <chen@ctpa04.mit.edu> 304 */ 305 #undef INIT_TIMER_AFTER_SUSPEND 306 307 #ifdef INIT_TIMER_AFTER_SUSPEND 308 #include <linux/timex.h> 309 #include <asm/io.h> 310 #include <linux/delay.h> 311 #endif 312 313 /* 314 * Need to poll the APM BIOS every second 315 */ 316 #define APM_CHECK_TIMEOUT (HZ) 317 318 /* 319 * Ignore suspend events for this amount of time after a resume 320 */ 321 #define DEFAULT_BOUNCE_INTERVAL (3 * HZ) 322 323 /* 324 * Maximum number of events stored 325 */ 326 #define APM_MAX_EVENTS 20 327 328 /* 329 * The per-file APM data 330 */ 331 struct apm_user { 332 int magic; 333 struct apm_user *next; 334 unsigned int suser: 1; 335 unsigned int writer: 1; 336 unsigned int reader: 1; 337 unsigned int suspend_wait: 1; 338 int suspend_result; 339 int suspends_pending; 340 int standbys_pending; 341 int suspends_read; 342 int standbys_read; 343 int event_head; 344 int event_tail; 345 apm_event_t events[APM_MAX_EVENTS]; 346 }; 347 348 /* 349 * The magic number in apm_user 350 */ 351 #define APM_BIOS_MAGIC 0x4101 352 353 /* 354 * idle percentage above which bios idle calls are done 355 */ 356 #ifdef CONFIG_APM_CPU_IDLE 357 #define DEFAULT_IDLE_THRESHOLD 95 358 #else 359 #define DEFAULT_IDLE_THRESHOLD 100 360 #endif 361 #define DEFAULT_IDLE_PERIOD (100 / 3) 362 363 static int apm_cpu_idle(struct cpuidle_device *dev, 364 struct cpuidle_driver *drv, int index); 365 366 static struct cpuidle_driver apm_idle_driver = { 367 .name = "apm_idle", 368 .owner = THIS_MODULE, 369 .states = { 370 { /* entry 0 is for polling */ }, 371 { /* entry 1 is for APM idle */ 372 .name = "APM", 373 .desc = "APM idle", 374 .exit_latency = 250, /* WAG */ 375 .target_residency = 500, /* WAG */ 376 .enter = &apm_cpu_idle 377 }, 378 }, 379 .state_count = 2, 380 }; 381 382 static struct cpuidle_device apm_cpuidle_device; 383 384 /* 385 * Local variables 386 */ 387 __visible struct { 388 unsigned long offset; 389 unsigned short segment; 390 } apm_bios_entry; 391 static int clock_slowed; 392 static int idle_threshold __read_mostly = DEFAULT_IDLE_THRESHOLD; 393 static int idle_period __read_mostly = DEFAULT_IDLE_PERIOD; 394 static int suspends_pending; 395 static int standbys_pending; 396 static int ignore_sys_suspend; 397 static int ignore_normal_resume; 398 static int bounce_interval __read_mostly = DEFAULT_BOUNCE_INTERVAL; 399 400 static bool debug __read_mostly; 401 static bool smp __read_mostly; 402 static int apm_disabled = -1; 403 #ifdef CONFIG_SMP 404 static bool power_off; 405 #else 406 static bool power_off = 1; 407 #endif 408 static bool realmode_power_off; 409 #ifdef CONFIG_APM_ALLOW_INTS 410 static bool allow_ints = 1; 411 #else 412 static bool allow_ints; 413 #endif 414 static bool broken_psr; 415 416 static DECLARE_WAIT_QUEUE_HEAD(apm_waitqueue); 417 static DECLARE_WAIT_QUEUE_HEAD(apm_suspend_waitqueue); 418 static struct apm_user *user_list; 419 static DEFINE_SPINLOCK(user_list_lock); 420 static DEFINE_MUTEX(apm_mutex); 421 422 /* 423 * Set up a segment that references the real mode segment 0x40 424 * that extends up to the end of page zero (that we have reserved). 425 * This is for buggy BIOS's that refer to (real mode) segment 0x40 426 * even though they are called in protected mode. 427 */ 428 static struct desc_struct bad_bios_desc = GDT_ENTRY_INIT(0x4092, 429 (unsigned long)__va(0x400UL), PAGE_SIZE - 0x400 - 1); 430 431 static const char driver_version[] = "1.16ac"; /* no spaces */ 432 433 static struct task_struct *kapmd_task; 434 435 /* 436 * APM event names taken from the APM 1.2 specification. These are 437 * the message codes that the BIOS uses to tell us about events 438 */ 439 static const char * const apm_event_name[] = { 440 "system standby", 441 "system suspend", 442 "normal resume", 443 "critical resume", 444 "low battery", 445 "power status change", 446 "update time", 447 "critical suspend", 448 "user standby", 449 "user suspend", 450 "system standby resume", 451 "capabilities change" 452 }; 453 #define NR_APM_EVENT_NAME ARRAY_SIZE(apm_event_name) 454 455 typedef struct lookup_t { 456 int key; 457 char *msg; 458 } lookup_t; 459 460 /* 461 * The BIOS returns a set of standard error codes in AX when the 462 * carry flag is set. 463 */ 464 465 static const lookup_t error_table[] = { 466 /* N/A { APM_SUCCESS, "Operation succeeded" }, */ 467 { APM_DISABLED, "Power management disabled" }, 468 { APM_CONNECTED, "Real mode interface already connected" }, 469 { APM_NOT_CONNECTED, "Interface not connected" }, 470 { APM_16_CONNECTED, "16 bit interface already connected" }, 471 /* N/A { APM_16_UNSUPPORTED, "16 bit interface not supported" }, */ 472 { APM_32_CONNECTED, "32 bit interface already connected" }, 473 { APM_32_UNSUPPORTED, "32 bit interface not supported" }, 474 { APM_BAD_DEVICE, "Unrecognized device ID" }, 475 { APM_BAD_PARAM, "Parameter out of range" }, 476 { APM_NOT_ENGAGED, "Interface not engaged" }, 477 { APM_BAD_FUNCTION, "Function not supported" }, 478 { APM_RESUME_DISABLED, "Resume timer disabled" }, 479 { APM_BAD_STATE, "Unable to enter requested state" }, 480 /* N/A { APM_NO_EVENTS, "No events pending" }, */ 481 { APM_NO_ERROR, "BIOS did not set a return code" }, 482 { APM_NOT_PRESENT, "No APM present" } 483 }; 484 #define ERROR_COUNT ARRAY_SIZE(error_table) 485 486 /** 487 * apm_error - display an APM error 488 * @str: information string 489 * @err: APM BIOS return code 490 * 491 * Write a meaningful log entry to the kernel log in the event of 492 * an APM error. Note that this also handles (negative) kernel errors. 493 */ 494 495 static void apm_error(char *str, int err) 496 { 497 int i; 498 499 for (i = 0; i < ERROR_COUNT; i++) 500 if (error_table[i].key == err) 501 break; 502 if (i < ERROR_COUNT) 503 pr_notice("%s: %s\n", str, error_table[i].msg); 504 else if (err < 0) 505 pr_notice("%s: linux error code %i\n", str, err); 506 else 507 pr_notice("%s: unknown error code %#2.2x\n", 508 str, err); 509 } 510 511 /* 512 * These are the actual BIOS calls. Depending on APM_ZERO_SEGS and 513 * apm_info.allow_ints, we are being really paranoid here! Not only 514 * are interrupts disabled, but all the segment registers (except SS) 515 * are saved and zeroed this means that if the BIOS tries to reference 516 * any data without explicitly loading the segment registers, the kernel 517 * will fault immediately rather than have some unforeseen circumstances 518 * for the rest of the kernel. And it will be very obvious! :-) Doing 519 * this depends on CS referring to the same physical memory as DS so that 520 * DS can be zeroed before the call. Unfortunately, we can't do anything 521 * about the stack segment/pointer. Also, we tell the compiler that 522 * everything could change. 523 * 524 * Also, we KNOW that for the non error case of apm_bios_call, there 525 * is no useful data returned in the low order 8 bits of eax. 526 */ 527 528 static inline unsigned long __apm_irq_save(void) 529 { 530 unsigned long flags; 531 local_save_flags(flags); 532 if (apm_info.allow_ints) { 533 if (irqs_disabled_flags(flags)) 534 local_irq_enable(); 535 } else 536 local_irq_disable(); 537 538 return flags; 539 } 540 541 #define apm_irq_save(flags) \ 542 do { flags = __apm_irq_save(); } while (0) 543 544 static inline void apm_irq_restore(unsigned long flags) 545 { 546 if (irqs_disabled_flags(flags)) 547 local_irq_disable(); 548 else if (irqs_disabled()) 549 local_irq_enable(); 550 } 551 552 #ifdef APM_ZERO_SEGS 553 # define APM_DECL_SEGS \ 554 unsigned int saved_fs; unsigned int saved_gs; 555 # define APM_DO_SAVE_SEGS \ 556 savesegment(fs, saved_fs); savesegment(gs, saved_gs) 557 # define APM_DO_RESTORE_SEGS \ 558 loadsegment(fs, saved_fs); loadsegment(gs, saved_gs) 559 #else 560 # define APM_DECL_SEGS 561 # define APM_DO_SAVE_SEGS 562 # define APM_DO_RESTORE_SEGS 563 #endif 564 565 struct apm_bios_call { 566 u32 func; 567 /* In and out */ 568 u32 ebx; 569 u32 ecx; 570 /* Out only */ 571 u32 eax; 572 u32 edx; 573 u32 esi; 574 575 /* Error: -ENOMEM, or bits 8-15 of eax */ 576 int err; 577 }; 578 579 /** 580 * __apm_bios_call - Make an APM BIOS 32bit call 581 * @_call: pointer to struct apm_bios_call. 582 * 583 * Make an APM call using the 32bit protected mode interface. The 584 * caller is responsible for knowing if APM BIOS is configured and 585 * enabled. This call can disable interrupts for a long period of 586 * time on some laptops. The return value is in AH and the carry 587 * flag is loaded into AL. If there is an error, then the error 588 * code is returned in AH (bits 8-15 of eax) and this function 589 * returns non-zero. 590 * 591 * Note: this makes the call on the current CPU. 592 */ 593 static long __apm_bios_call(void *_call) 594 { 595 APM_DECL_SEGS 596 unsigned long flags; 597 int cpu; 598 struct desc_struct save_desc_40; 599 struct desc_struct *gdt; 600 struct apm_bios_call *call = _call; 601 602 cpu = get_cpu(); 603 BUG_ON(cpu != 0); 604 gdt = get_cpu_gdt_rw(cpu); 605 save_desc_40 = gdt[0x40 / 8]; 606 gdt[0x40 / 8] = bad_bios_desc; 607 608 apm_irq_save(flags); 609 firmware_restrict_branch_speculation_start(); 610 APM_DO_SAVE_SEGS; 611 apm_bios_call_asm(call->func, call->ebx, call->ecx, 612 &call->eax, &call->ebx, &call->ecx, &call->edx, 613 &call->esi); 614 APM_DO_RESTORE_SEGS; 615 firmware_restrict_branch_speculation_end(); 616 apm_irq_restore(flags); 617 gdt[0x40 / 8] = save_desc_40; 618 put_cpu(); 619 620 return call->eax & 0xff; 621 } 622 623 /* Run __apm_bios_call or __apm_bios_call_simple on CPU 0 */ 624 static int on_cpu0(long (*fn)(void *), struct apm_bios_call *call) 625 { 626 int ret; 627 628 /* Don't bother with work_on_cpu in the common case, so we don't 629 * have to worry about OOM or overhead. */ 630 if (get_cpu() == 0) { 631 ret = fn(call); 632 put_cpu(); 633 } else { 634 put_cpu(); 635 ret = work_on_cpu(0, fn, call); 636 } 637 638 /* work_on_cpu can fail with -ENOMEM */ 639 if (ret < 0) 640 call->err = ret; 641 else 642 call->err = (call->eax >> 8) & 0xff; 643 644 return ret; 645 } 646 647 /** 648 * apm_bios_call - Make an APM BIOS 32bit call (on CPU 0) 649 * @call: the apm_bios_call registers. 650 * 651 * If there is an error, it is returned in @call.err. 652 */ 653 static int apm_bios_call(struct apm_bios_call *call) 654 { 655 return on_cpu0(__apm_bios_call, call); 656 } 657 658 /** 659 * __apm_bios_call_simple - Make an APM BIOS 32bit call (on CPU 0) 660 * @_call: pointer to struct apm_bios_call. 661 * 662 * Make a BIOS call that returns one value only, or just status. 663 * If there is an error, then the error code is returned in AH 664 * (bits 8-15 of eax) and this function returns non-zero (it can 665 * also return -ENOMEM). This is used for simpler BIOS operations. 666 * This call may hold interrupts off for a long time on some laptops. 667 * 668 * Note: this makes the call on the current CPU. 669 */ 670 static long __apm_bios_call_simple(void *_call) 671 { 672 u8 error; 673 APM_DECL_SEGS 674 unsigned long flags; 675 int cpu; 676 struct desc_struct save_desc_40; 677 struct desc_struct *gdt; 678 struct apm_bios_call *call = _call; 679 680 cpu = get_cpu(); 681 BUG_ON(cpu != 0); 682 gdt = get_cpu_gdt_rw(cpu); 683 save_desc_40 = gdt[0x40 / 8]; 684 gdt[0x40 / 8] = bad_bios_desc; 685 686 apm_irq_save(flags); 687 firmware_restrict_branch_speculation_start(); 688 APM_DO_SAVE_SEGS; 689 error = apm_bios_call_simple_asm(call->func, call->ebx, call->ecx, 690 &call->eax); 691 APM_DO_RESTORE_SEGS; 692 firmware_restrict_branch_speculation_end(); 693 apm_irq_restore(flags); 694 gdt[0x40 / 8] = save_desc_40; 695 put_cpu(); 696 return error; 697 } 698 699 /** 700 * apm_bios_call_simple - make a simple APM BIOS 32bit call 701 * @func: APM function to invoke 702 * @ebx_in: EBX register value for BIOS call 703 * @ecx_in: ECX register value for BIOS call 704 * @eax: EAX register on return from the BIOS call 705 * @err: bits 706 * 707 * Make a BIOS call that returns one value only, or just status. 708 * If there is an error, then the error code is returned in @err 709 * and this function returns non-zero. This is used for simpler 710 * BIOS operations. This call may hold interrupts off for a long 711 * time on some laptops. 712 */ 713 static int apm_bios_call_simple(u32 func, u32 ebx_in, u32 ecx_in, u32 *eax, 714 int *err) 715 { 716 struct apm_bios_call call; 717 int ret; 718 719 call.func = func; 720 call.ebx = ebx_in; 721 call.ecx = ecx_in; 722 723 ret = on_cpu0(__apm_bios_call_simple, &call); 724 *eax = call.eax; 725 *err = call.err; 726 return ret; 727 } 728 729 /** 730 * apm_driver_version - APM driver version 731 * @val: loaded with the APM version on return 732 * 733 * Retrieve the APM version supported by the BIOS. This is only 734 * supported for APM 1.1 or higher. An error indicates APM 1.0 is 735 * probably present. 736 * 737 * On entry val should point to a value indicating the APM driver 738 * version with the high byte being the major and the low byte the 739 * minor number both in BCD 740 * 741 * On return it will hold the BIOS revision supported in the 742 * same format. 743 */ 744 745 static int apm_driver_version(u_short *val) 746 { 747 u32 eax; 748 int err; 749 750 if (apm_bios_call_simple(APM_FUNC_VERSION, 0, *val, &eax, &err)) 751 return err; 752 *val = eax; 753 return APM_SUCCESS; 754 } 755 756 /** 757 * apm_get_event - get an APM event from the BIOS 758 * @event: pointer to the event 759 * @info: point to the event information 760 * 761 * The APM BIOS provides a polled information for event 762 * reporting. The BIOS expects to be polled at least every second 763 * when events are pending. When a message is found the caller should 764 * poll until no more messages are present. However, this causes 765 * problems on some laptops where a suspend event notification is 766 * not cleared until it is acknowledged. 767 * 768 * Additional information is returned in the info pointer, providing 769 * that APM 1.2 is in use. If no messages are pending the value 0x80 770 * is returned (No power management events pending). 771 */ 772 static int apm_get_event(apm_event_t *event, apm_eventinfo_t *info) 773 { 774 struct apm_bios_call call; 775 776 call.func = APM_FUNC_GET_EVENT; 777 call.ebx = call.ecx = 0; 778 779 if (apm_bios_call(&call)) 780 return call.err; 781 782 *event = call.ebx; 783 if (apm_info.connection_version < 0x0102) 784 *info = ~0; /* indicate info not valid */ 785 else 786 *info = call.ecx; 787 return APM_SUCCESS; 788 } 789 790 /** 791 * set_power_state - set the power management state 792 * @what: which items to transition 793 * @state: state to transition to 794 * 795 * Request an APM change of state for one or more system devices. The 796 * processor state must be transitioned last of all. what holds the 797 * class of device in the upper byte and the device number (0xFF for 798 * all) for the object to be transitioned. 799 * 800 * The state holds the state to transition to, which may in fact 801 * be an acceptance of a BIOS requested state change. 802 */ 803 804 static int set_power_state(u_short what, u_short state) 805 { 806 u32 eax; 807 int err; 808 809 if (apm_bios_call_simple(APM_FUNC_SET_STATE, what, state, &eax, &err)) 810 return err; 811 return APM_SUCCESS; 812 } 813 814 /** 815 * set_system_power_state - set system wide power state 816 * @state: which state to enter 817 * 818 * Transition the entire system into a new APM power state. 819 */ 820 821 static int set_system_power_state(u_short state) 822 { 823 return set_power_state(APM_DEVICE_ALL, state); 824 } 825 826 /** 827 * apm_do_idle - perform power saving 828 * 829 * This function notifies the BIOS that the processor is (in the view 830 * of the OS) idle. It returns -1 in the event that the BIOS refuses 831 * to handle the idle request. On a success the function returns 1 832 * if the BIOS did clock slowing or 0 otherwise. 833 */ 834 835 static int apm_do_idle(void) 836 { 837 u32 eax; 838 u8 ret = 0; 839 int idled = 0; 840 int err = 0; 841 842 if (!need_resched()) { 843 idled = 1; 844 ret = apm_bios_call_simple(APM_FUNC_IDLE, 0, 0, &eax, &err); 845 } 846 847 if (!idled) 848 return 0; 849 850 if (ret) { 851 static unsigned long t; 852 853 /* This always fails on some SMP boards running UP kernels. 854 * Only report the failure the first 5 times. 855 */ 856 if (++t < 5) { 857 printk(KERN_DEBUG "apm_do_idle failed (%d)\n", err); 858 t = jiffies; 859 } 860 return -1; 861 } 862 clock_slowed = (apm_info.bios.flags & APM_IDLE_SLOWS_CLOCK) != 0; 863 return clock_slowed; 864 } 865 866 /** 867 * apm_do_busy - inform the BIOS the CPU is busy 868 * 869 * Request that the BIOS brings the CPU back to full performance. 870 */ 871 872 static void apm_do_busy(void) 873 { 874 u32 dummy; 875 int err; 876 877 if (clock_slowed || ALWAYS_CALL_BUSY) { 878 (void)apm_bios_call_simple(APM_FUNC_BUSY, 0, 0, &dummy, &err); 879 clock_slowed = 0; 880 } 881 } 882 883 /* 884 * If no process has really been interested in 885 * the CPU for some time, we want to call BIOS 886 * power management - we probably want 887 * to conserve power. 888 */ 889 #define IDLE_CALC_LIMIT (HZ * 100) 890 #define IDLE_LEAKY_MAX 16 891 892 /** 893 * apm_cpu_idle - cpu idling for APM capable Linux 894 * 895 * This is the idling function the kernel executes when APM is available. It 896 * tries to do BIOS powermanagement based on the average system idle time. 897 * Furthermore it calls the system default idle routine. 898 */ 899 900 static int apm_cpu_idle(struct cpuidle_device *dev, 901 struct cpuidle_driver *drv, int index) 902 { 903 static int use_apm_idle; /* = 0 */ 904 static unsigned int last_jiffies; /* = 0 */ 905 static u64 last_stime; /* = 0 */ 906 u64 stime, utime; 907 908 int apm_idle_done = 0; 909 unsigned int jiffies_since_last_check = jiffies - last_jiffies; 910 unsigned int bucket; 911 912 recalc: 913 task_cputime(current, &utime, &stime); 914 if (jiffies_since_last_check > IDLE_CALC_LIMIT) { 915 use_apm_idle = 0; 916 } else if (jiffies_since_last_check > idle_period) { 917 unsigned int idle_percentage; 918 919 idle_percentage = nsecs_to_jiffies(stime - last_stime); 920 idle_percentage *= 100; 921 idle_percentage /= jiffies_since_last_check; 922 use_apm_idle = (idle_percentage > idle_threshold); 923 if (apm_info.forbid_idle) 924 use_apm_idle = 0; 925 } 926 927 last_jiffies = jiffies; 928 last_stime = stime; 929 930 bucket = IDLE_LEAKY_MAX; 931 932 while (!need_resched()) { 933 if (use_apm_idle) { 934 unsigned int t; 935 936 t = jiffies; 937 switch (apm_do_idle()) { 938 case 0: 939 apm_idle_done = 1; 940 if (t != jiffies) { 941 if (bucket) { 942 bucket = IDLE_LEAKY_MAX; 943 continue; 944 } 945 } else if (bucket) { 946 bucket--; 947 continue; 948 } 949 break; 950 case 1: 951 apm_idle_done = 1; 952 break; 953 default: /* BIOS refused */ 954 break; 955 } 956 } 957 default_idle(); 958 local_irq_disable(); 959 jiffies_since_last_check = jiffies - last_jiffies; 960 if (jiffies_since_last_check > idle_period) 961 goto recalc; 962 } 963 964 if (apm_idle_done) 965 apm_do_busy(); 966 967 return index; 968 } 969 970 /** 971 * apm_power_off - ask the BIOS to power off 972 * 973 * Handle the power off sequence. This is the one piece of code we 974 * will execute even on SMP machines. In order to deal with BIOS 975 * bugs we support real mode APM BIOS power off calls. We also make 976 * the SMP call on CPU0 as some systems will only honour this call 977 * on their first cpu. 978 */ 979 980 static void apm_power_off(void) 981 { 982 /* Some bioses don't like being called from CPU != 0 */ 983 if (apm_info.realmode_power_off) { 984 set_cpus_allowed_ptr(current, cpumask_of(0)); 985 machine_real_restart(MRR_APM); 986 } else { 987 (void)set_system_power_state(APM_STATE_OFF); 988 } 989 } 990 991 #ifdef CONFIG_APM_DO_ENABLE 992 993 /** 994 * apm_enable_power_management - enable BIOS APM power management 995 * @enable: enable yes/no 996 * 997 * Enable or disable the APM BIOS power services. 998 */ 999 1000 static int apm_enable_power_management(int enable) 1001 { 1002 u32 eax; 1003 int err; 1004 1005 if ((enable == 0) && (apm_info.bios.flags & APM_BIOS_DISENGAGED)) 1006 return APM_NOT_ENGAGED; 1007 if (apm_bios_call_simple(APM_FUNC_ENABLE_PM, APM_DEVICE_BALL, 1008 enable, &eax, &err)) 1009 return err; 1010 if (enable) 1011 apm_info.bios.flags &= ~APM_BIOS_DISABLED; 1012 else 1013 apm_info.bios.flags |= APM_BIOS_DISABLED; 1014 return APM_SUCCESS; 1015 } 1016 #endif 1017 1018 /** 1019 * apm_get_power_status - get current power state 1020 * @status: returned status 1021 * @bat: battery info 1022 * @life: estimated life 1023 * 1024 * Obtain the current power status from the APM BIOS. We return a 1025 * status which gives the rough battery status, and current power 1026 * source. The bat value returned give an estimate as a percentage 1027 * of life and a status value for the battery. The estimated life 1028 * if reported is a lifetime in seconds/minutes at current power 1029 * consumption. 1030 */ 1031 1032 static int apm_get_power_status(u_short *status, u_short *bat, u_short *life) 1033 { 1034 struct apm_bios_call call; 1035 1036 call.func = APM_FUNC_GET_STATUS; 1037 call.ebx = APM_DEVICE_ALL; 1038 call.ecx = 0; 1039 1040 if (apm_info.get_power_status_broken) 1041 return APM_32_UNSUPPORTED; 1042 if (apm_bios_call(&call)) { 1043 if (!call.err) 1044 return APM_NO_ERROR; 1045 return call.err; 1046 } 1047 *status = call.ebx; 1048 *bat = call.ecx; 1049 if (apm_info.get_power_status_swabinminutes) { 1050 *life = swab16((u16)call.edx); 1051 *life |= 0x8000; 1052 } else 1053 *life = call.edx; 1054 return APM_SUCCESS; 1055 } 1056 1057 #if 0 1058 static int apm_get_battery_status(u_short which, u_short *status, 1059 u_short *bat, u_short *life, u_short *nbat) 1060 { 1061 u32 eax; 1062 u32 ebx; 1063 u32 ecx; 1064 u32 edx; 1065 u32 esi; 1066 1067 if (apm_info.connection_version < 0x0102) { 1068 /* pretend we only have one battery. */ 1069 if (which != 1) 1070 return APM_BAD_DEVICE; 1071 *nbat = 1; 1072 return apm_get_power_status(status, bat, life); 1073 } 1074 1075 if (apm_bios_call(APM_FUNC_GET_STATUS, (0x8000 | (which)), 0, &eax, 1076 &ebx, &ecx, &edx, &esi)) 1077 return (eax >> 8) & 0xff; 1078 *status = ebx; 1079 *bat = ecx; 1080 *life = edx; 1081 *nbat = esi; 1082 return APM_SUCCESS; 1083 } 1084 #endif 1085 1086 /** 1087 * apm_engage_power_management - enable PM on a device 1088 * @device: identity of device 1089 * @enable: on/off 1090 * 1091 * Activate or deactivate power management on either a specific device 1092 * or the entire system (%APM_DEVICE_ALL). 1093 */ 1094 1095 static int apm_engage_power_management(u_short device, int enable) 1096 { 1097 u32 eax; 1098 int err; 1099 1100 if ((enable == 0) && (device == APM_DEVICE_ALL) 1101 && (apm_info.bios.flags & APM_BIOS_DISABLED)) 1102 return APM_DISABLED; 1103 if (apm_bios_call_simple(APM_FUNC_ENGAGE_PM, device, enable, 1104 &eax, &err)) 1105 return err; 1106 if (device == APM_DEVICE_ALL) { 1107 if (enable) 1108 apm_info.bios.flags &= ~APM_BIOS_DISENGAGED; 1109 else 1110 apm_info.bios.flags |= APM_BIOS_DISENGAGED; 1111 } 1112 return APM_SUCCESS; 1113 } 1114 1115 #if defined(CONFIG_APM_DISPLAY_BLANK) && defined(CONFIG_VT) 1116 1117 /** 1118 * apm_console_blank - blank the display 1119 * @blank: on/off 1120 * 1121 * Attempt to blank the console, firstly by blanking just video device 1122 * zero, and if that fails (some BIOSes don't support it) then it blanks 1123 * all video devices. Typically the BIOS will do laptop backlight and 1124 * monitor powerdown for us. 1125 */ 1126 1127 static int apm_console_blank(int blank) 1128 { 1129 int error = APM_NOT_ENGAGED; /* silence gcc */ 1130 int i; 1131 u_short state; 1132 static const u_short dev[3] = { 0x100, 0x1FF, 0x101 }; 1133 1134 state = blank ? APM_STATE_STANDBY : APM_STATE_READY; 1135 1136 for (i = 0; i < ARRAY_SIZE(dev); i++) { 1137 error = set_power_state(dev[i], state); 1138 1139 if ((error == APM_SUCCESS) || (error == APM_NO_ERROR)) 1140 return 1; 1141 1142 if (error == APM_NOT_ENGAGED) 1143 break; 1144 } 1145 1146 if (error == APM_NOT_ENGAGED) { 1147 static int tried; 1148 int eng_error; 1149 if (tried++ == 0) { 1150 eng_error = apm_engage_power_management(APM_DEVICE_ALL, 1); 1151 if (eng_error) { 1152 apm_error("set display", error); 1153 apm_error("engage interface", eng_error); 1154 return 0; 1155 } else 1156 return apm_console_blank(blank); 1157 } 1158 } 1159 apm_error("set display", error); 1160 return 0; 1161 } 1162 #endif 1163 1164 static int queue_empty(struct apm_user *as) 1165 { 1166 return as->event_head == as->event_tail; 1167 } 1168 1169 static apm_event_t get_queued_event(struct apm_user *as) 1170 { 1171 if (++as->event_tail >= APM_MAX_EVENTS) 1172 as->event_tail = 0; 1173 return as->events[as->event_tail]; 1174 } 1175 1176 static void queue_event(apm_event_t event, struct apm_user *sender) 1177 { 1178 struct apm_user *as; 1179 1180 spin_lock(&user_list_lock); 1181 if (user_list == NULL) 1182 goto out; 1183 for (as = user_list; as != NULL; as = as->next) { 1184 if ((as == sender) || (!as->reader)) 1185 continue; 1186 if (++as->event_head >= APM_MAX_EVENTS) 1187 as->event_head = 0; 1188 1189 if (as->event_head == as->event_tail) { 1190 static int notified; 1191 1192 if (notified++ == 0) 1193 pr_err("an event queue overflowed\n"); 1194 if (++as->event_tail >= APM_MAX_EVENTS) 1195 as->event_tail = 0; 1196 } 1197 as->events[as->event_head] = event; 1198 if (!as->suser || !as->writer) 1199 continue; 1200 switch (event) { 1201 case APM_SYS_SUSPEND: 1202 case APM_USER_SUSPEND: 1203 as->suspends_pending++; 1204 suspends_pending++; 1205 break; 1206 1207 case APM_SYS_STANDBY: 1208 case APM_USER_STANDBY: 1209 as->standbys_pending++; 1210 standbys_pending++; 1211 break; 1212 } 1213 } 1214 wake_up_interruptible(&apm_waitqueue); 1215 out: 1216 spin_unlock(&user_list_lock); 1217 } 1218 1219 static void reinit_timer(void) 1220 { 1221 #ifdef INIT_TIMER_AFTER_SUSPEND 1222 unsigned long flags; 1223 1224 raw_spin_lock_irqsave(&i8253_lock, flags); 1225 /* set the clock to HZ */ 1226 outb_p(0x34, PIT_MODE); /* binary, mode 2, LSB/MSB, ch 0 */ 1227 udelay(10); 1228 outb_p(LATCH & 0xff, PIT_CH0); /* LSB */ 1229 udelay(10); 1230 outb_p(LATCH >> 8, PIT_CH0); /* MSB */ 1231 udelay(10); 1232 raw_spin_unlock_irqrestore(&i8253_lock, flags); 1233 #endif 1234 } 1235 1236 static int suspend(int vetoable) 1237 { 1238 int err; 1239 struct apm_user *as; 1240 1241 dpm_suspend_start(PMSG_SUSPEND); 1242 dpm_suspend_end(PMSG_SUSPEND); 1243 1244 local_irq_disable(); 1245 syscore_suspend(); 1246 1247 local_irq_enable(); 1248 1249 save_processor_state(); 1250 err = set_system_power_state(APM_STATE_SUSPEND); 1251 ignore_normal_resume = 1; 1252 restore_processor_state(); 1253 1254 local_irq_disable(); 1255 reinit_timer(); 1256 1257 if (err == APM_NO_ERROR) 1258 err = APM_SUCCESS; 1259 if (err != APM_SUCCESS) 1260 apm_error("suspend", err); 1261 err = (err == APM_SUCCESS) ? 0 : -EIO; 1262 1263 syscore_resume(); 1264 local_irq_enable(); 1265 1266 dpm_resume_start(PMSG_RESUME); 1267 dpm_resume_end(PMSG_RESUME); 1268 1269 queue_event(APM_NORMAL_RESUME, NULL); 1270 spin_lock(&user_list_lock); 1271 for (as = user_list; as != NULL; as = as->next) { 1272 as->suspend_wait = 0; 1273 as->suspend_result = err; 1274 } 1275 spin_unlock(&user_list_lock); 1276 wake_up_interruptible(&apm_suspend_waitqueue); 1277 return err; 1278 } 1279 1280 static void standby(void) 1281 { 1282 int err; 1283 1284 dpm_suspend_end(PMSG_SUSPEND); 1285 1286 local_irq_disable(); 1287 syscore_suspend(); 1288 local_irq_enable(); 1289 1290 err = set_system_power_state(APM_STATE_STANDBY); 1291 if ((err != APM_SUCCESS) && (err != APM_NO_ERROR)) 1292 apm_error("standby", err); 1293 1294 local_irq_disable(); 1295 syscore_resume(); 1296 local_irq_enable(); 1297 1298 dpm_resume_start(PMSG_RESUME); 1299 } 1300 1301 static apm_event_t get_event(void) 1302 { 1303 int error; 1304 apm_event_t event = APM_NO_EVENTS; /* silence gcc */ 1305 apm_eventinfo_t info; 1306 1307 static int notified; 1308 1309 /* we don't use the eventinfo */ 1310 error = apm_get_event(&event, &info); 1311 if (error == APM_SUCCESS) 1312 return event; 1313 1314 if ((error != APM_NO_EVENTS) && (notified++ == 0)) 1315 apm_error("get_event", error); 1316 1317 return 0; 1318 } 1319 1320 static void check_events(void) 1321 { 1322 apm_event_t event; 1323 static unsigned long last_resume; 1324 static int ignore_bounce; 1325 1326 while ((event = get_event()) != 0) { 1327 if (debug) { 1328 if (event <= NR_APM_EVENT_NAME) 1329 printk(KERN_DEBUG "apm: received %s notify\n", 1330 apm_event_name[event - 1]); 1331 else 1332 printk(KERN_DEBUG "apm: received unknown " 1333 "event 0x%02x\n", event); 1334 } 1335 if (ignore_bounce 1336 && (time_after(jiffies, last_resume + bounce_interval))) 1337 ignore_bounce = 0; 1338 1339 switch (event) { 1340 case APM_SYS_STANDBY: 1341 case APM_USER_STANDBY: 1342 queue_event(event, NULL); 1343 if (standbys_pending <= 0) 1344 standby(); 1345 break; 1346 1347 case APM_USER_SUSPEND: 1348 #ifdef CONFIG_APM_IGNORE_USER_SUSPEND 1349 if (apm_info.connection_version > 0x100) 1350 set_system_power_state(APM_STATE_REJECT); 1351 break; 1352 #endif 1353 case APM_SYS_SUSPEND: 1354 if (ignore_bounce) { 1355 if (apm_info.connection_version > 0x100) 1356 set_system_power_state(APM_STATE_REJECT); 1357 break; 1358 } 1359 /* 1360 * If we are already processing a SUSPEND, 1361 * then further SUSPEND events from the BIOS 1362 * will be ignored. We also return here to 1363 * cope with the fact that the Thinkpads keep 1364 * sending a SUSPEND event until something else 1365 * happens! 1366 */ 1367 if (ignore_sys_suspend) 1368 return; 1369 ignore_sys_suspend = 1; 1370 queue_event(event, NULL); 1371 if (suspends_pending <= 0) 1372 (void) suspend(1); 1373 break; 1374 1375 case APM_NORMAL_RESUME: 1376 case APM_CRITICAL_RESUME: 1377 case APM_STANDBY_RESUME: 1378 ignore_sys_suspend = 0; 1379 last_resume = jiffies; 1380 ignore_bounce = 1; 1381 if ((event != APM_NORMAL_RESUME) 1382 || (ignore_normal_resume == 0)) { 1383 dpm_resume_end(PMSG_RESUME); 1384 queue_event(event, NULL); 1385 } 1386 ignore_normal_resume = 0; 1387 break; 1388 1389 case APM_CAPABILITY_CHANGE: 1390 case APM_LOW_BATTERY: 1391 case APM_POWER_STATUS_CHANGE: 1392 queue_event(event, NULL); 1393 /* If needed, notify drivers here */ 1394 break; 1395 1396 case APM_UPDATE_TIME: 1397 break; 1398 1399 case APM_CRITICAL_SUSPEND: 1400 /* 1401 * We are not allowed to reject a critical suspend. 1402 */ 1403 (void)suspend(0); 1404 break; 1405 } 1406 } 1407 } 1408 1409 static void apm_event_handler(void) 1410 { 1411 static int pending_count = 4; 1412 int err; 1413 1414 if ((standbys_pending > 0) || (suspends_pending > 0)) { 1415 if ((apm_info.connection_version > 0x100) && 1416 (pending_count-- <= 0)) { 1417 pending_count = 4; 1418 if (debug) 1419 printk(KERN_DEBUG "apm: setting state busy\n"); 1420 err = set_system_power_state(APM_STATE_BUSY); 1421 if (err) 1422 apm_error("busy", err); 1423 } 1424 } else 1425 pending_count = 4; 1426 check_events(); 1427 } 1428 1429 /* 1430 * This is the APM thread main loop. 1431 */ 1432 1433 static void apm_mainloop(void) 1434 { 1435 DECLARE_WAITQUEUE(wait, current); 1436 1437 add_wait_queue(&apm_waitqueue, &wait); 1438 set_current_state(TASK_INTERRUPTIBLE); 1439 for (;;) { 1440 schedule_timeout(APM_CHECK_TIMEOUT); 1441 if (kthread_should_stop()) 1442 break; 1443 /* 1444 * Ok, check all events, check for idle (and mark us sleeping 1445 * so as not to count towards the load average).. 1446 */ 1447 set_current_state(TASK_INTERRUPTIBLE); 1448 apm_event_handler(); 1449 } 1450 remove_wait_queue(&apm_waitqueue, &wait); 1451 } 1452 1453 static int check_apm_user(struct apm_user *as, const char *func) 1454 { 1455 if (as == NULL || as->magic != APM_BIOS_MAGIC) { 1456 pr_err("%s passed bad filp\n", func); 1457 return 1; 1458 } 1459 return 0; 1460 } 1461 1462 static ssize_t do_read(struct file *fp, char __user *buf, size_t count, loff_t *ppos) 1463 { 1464 struct apm_user *as; 1465 int i; 1466 apm_event_t event; 1467 1468 as = fp->private_data; 1469 if (check_apm_user(as, "read")) 1470 return -EIO; 1471 if ((int)count < sizeof(apm_event_t)) 1472 return -EINVAL; 1473 if ((queue_empty(as)) && (fp->f_flags & O_NONBLOCK)) 1474 return -EAGAIN; 1475 wait_event_interruptible(apm_waitqueue, !queue_empty(as)); 1476 i = count; 1477 while ((i >= sizeof(event)) && !queue_empty(as)) { 1478 event = get_queued_event(as); 1479 if (copy_to_user(buf, &event, sizeof(event))) { 1480 if (i < count) 1481 break; 1482 return -EFAULT; 1483 } 1484 switch (event) { 1485 case APM_SYS_SUSPEND: 1486 case APM_USER_SUSPEND: 1487 as->suspends_read++; 1488 break; 1489 1490 case APM_SYS_STANDBY: 1491 case APM_USER_STANDBY: 1492 as->standbys_read++; 1493 break; 1494 } 1495 buf += sizeof(event); 1496 i -= sizeof(event); 1497 } 1498 if (i < count) 1499 return count - i; 1500 if (signal_pending(current)) 1501 return -ERESTARTSYS; 1502 return 0; 1503 } 1504 1505 static __poll_t do_poll(struct file *fp, poll_table *wait) 1506 { 1507 struct apm_user *as; 1508 1509 as = fp->private_data; 1510 if (check_apm_user(as, "poll")) 1511 return 0; 1512 poll_wait(fp, &apm_waitqueue, wait); 1513 if (!queue_empty(as)) 1514 return EPOLLIN | EPOLLRDNORM; 1515 return 0; 1516 } 1517 1518 static long do_ioctl(struct file *filp, u_int cmd, u_long arg) 1519 { 1520 struct apm_user *as; 1521 int ret; 1522 1523 as = filp->private_data; 1524 if (check_apm_user(as, "ioctl")) 1525 return -EIO; 1526 if (!as->suser || !as->writer) 1527 return -EPERM; 1528 switch (cmd) { 1529 case APM_IOC_STANDBY: 1530 mutex_lock(&apm_mutex); 1531 if (as->standbys_read > 0) { 1532 as->standbys_read--; 1533 as->standbys_pending--; 1534 standbys_pending--; 1535 } else 1536 queue_event(APM_USER_STANDBY, as); 1537 if (standbys_pending <= 0) 1538 standby(); 1539 mutex_unlock(&apm_mutex); 1540 break; 1541 case APM_IOC_SUSPEND: 1542 mutex_lock(&apm_mutex); 1543 if (as->suspends_read > 0) { 1544 as->suspends_read--; 1545 as->suspends_pending--; 1546 suspends_pending--; 1547 } else 1548 queue_event(APM_USER_SUSPEND, as); 1549 if (suspends_pending <= 0) { 1550 ret = suspend(1); 1551 mutex_unlock(&apm_mutex); 1552 } else { 1553 as->suspend_wait = 1; 1554 mutex_unlock(&apm_mutex); 1555 wait_event_interruptible(apm_suspend_waitqueue, 1556 as->suspend_wait == 0); 1557 ret = as->suspend_result; 1558 } 1559 return ret; 1560 default: 1561 return -ENOTTY; 1562 } 1563 return 0; 1564 } 1565 1566 static int do_release(struct inode *inode, struct file *filp) 1567 { 1568 struct apm_user *as; 1569 1570 as = filp->private_data; 1571 if (check_apm_user(as, "release")) 1572 return 0; 1573 filp->private_data = NULL; 1574 if (as->standbys_pending > 0) { 1575 standbys_pending -= as->standbys_pending; 1576 if (standbys_pending <= 0) 1577 standby(); 1578 } 1579 if (as->suspends_pending > 0) { 1580 suspends_pending -= as->suspends_pending; 1581 if (suspends_pending <= 0) 1582 (void) suspend(1); 1583 } 1584 spin_lock(&user_list_lock); 1585 if (user_list == as) 1586 user_list = as->next; 1587 else { 1588 struct apm_user *as1; 1589 1590 for (as1 = user_list; 1591 (as1 != NULL) && (as1->next != as); 1592 as1 = as1->next) 1593 ; 1594 if (as1 == NULL) 1595 pr_err("filp not in user list\n"); 1596 else 1597 as1->next = as->next; 1598 } 1599 spin_unlock(&user_list_lock); 1600 kfree(as); 1601 return 0; 1602 } 1603 1604 static int do_open(struct inode *inode, struct file *filp) 1605 { 1606 struct apm_user *as; 1607 1608 as = kmalloc(sizeof(*as), GFP_KERNEL); 1609 if (as == NULL) 1610 return -ENOMEM; 1611 1612 as->magic = APM_BIOS_MAGIC; 1613 as->event_tail = as->event_head = 0; 1614 as->suspends_pending = as->standbys_pending = 0; 1615 as->suspends_read = as->standbys_read = 0; 1616 /* 1617 * XXX - this is a tiny bit broken, when we consider BSD 1618 * process accounting. If the device is opened by root, we 1619 * instantly flag that we used superuser privs. Who knows, 1620 * we might close the device immediately without doing a 1621 * privileged operation -- cevans 1622 */ 1623 as->suser = capable(CAP_SYS_ADMIN); 1624 as->writer = (filp->f_mode & FMODE_WRITE) == FMODE_WRITE; 1625 as->reader = (filp->f_mode & FMODE_READ) == FMODE_READ; 1626 spin_lock(&user_list_lock); 1627 as->next = user_list; 1628 user_list = as; 1629 spin_unlock(&user_list_lock); 1630 filp->private_data = as; 1631 return 0; 1632 } 1633 1634 #ifdef CONFIG_PROC_FS 1635 static int proc_apm_show(struct seq_file *m, void *v) 1636 { 1637 unsigned short bx; 1638 unsigned short cx; 1639 unsigned short dx; 1640 int error; 1641 unsigned short ac_line_status = 0xff; 1642 unsigned short battery_status = 0xff; 1643 unsigned short battery_flag = 0xff; 1644 int percentage = -1; 1645 int time_units = -1; 1646 char *units = "?"; 1647 1648 if ((num_online_cpus() == 1) && 1649 !(error = apm_get_power_status(&bx, &cx, &dx))) { 1650 ac_line_status = (bx >> 8) & 0xff; 1651 battery_status = bx & 0xff; 1652 if ((cx & 0xff) != 0xff) 1653 percentage = cx & 0xff; 1654 1655 if (apm_info.connection_version > 0x100) { 1656 battery_flag = (cx >> 8) & 0xff; 1657 if (dx != 0xffff) { 1658 units = (dx & 0x8000) ? "min" : "sec"; 1659 time_units = dx & 0x7fff; 1660 } 1661 } 1662 } 1663 /* Arguments, with symbols from linux/apm_bios.h. Information is 1664 from the Get Power Status (0x0a) call unless otherwise noted. 1665 1666 0) Linux driver version (this will change if format changes) 1667 1) APM BIOS Version. Usually 1.0, 1.1 or 1.2. 1668 2) APM flags from APM Installation Check (0x00): 1669 bit 0: APM_16_BIT_SUPPORT 1670 bit 1: APM_32_BIT_SUPPORT 1671 bit 2: APM_IDLE_SLOWS_CLOCK 1672 bit 3: APM_BIOS_DISABLED 1673 bit 4: APM_BIOS_DISENGAGED 1674 3) AC line status 1675 0x00: Off-line 1676 0x01: On-line 1677 0x02: On backup power (BIOS >= 1.1 only) 1678 0xff: Unknown 1679 4) Battery status 1680 0x00: High 1681 0x01: Low 1682 0x02: Critical 1683 0x03: Charging 1684 0x04: Selected battery not present (BIOS >= 1.2 only) 1685 0xff: Unknown 1686 5) Battery flag 1687 bit 0: High 1688 bit 1: Low 1689 bit 2: Critical 1690 bit 3: Charging 1691 bit 7: No system battery 1692 0xff: Unknown 1693 6) Remaining battery life (percentage of charge): 1694 0-100: valid 1695 -1: Unknown 1696 7) Remaining battery life (time units): 1697 Number of remaining minutes or seconds 1698 -1: Unknown 1699 8) min = minutes; sec = seconds */ 1700 1701 seq_printf(m, "%s %d.%d 0x%02x 0x%02x 0x%02x 0x%02x %d%% %d %s\n", 1702 driver_version, 1703 (apm_info.bios.version >> 8) & 0xff, 1704 apm_info.bios.version & 0xff, 1705 apm_info.bios.flags, 1706 ac_line_status, 1707 battery_status, 1708 battery_flag, 1709 percentage, 1710 time_units, 1711 units); 1712 return 0; 1713 } 1714 #endif 1715 1716 static int apm(void *unused) 1717 { 1718 unsigned short bx; 1719 unsigned short cx; 1720 unsigned short dx; 1721 int error; 1722 char *power_stat; 1723 char *bat_stat; 1724 1725 /* 2002/08/01 - WT 1726 * This is to avoid random crashes at boot time during initialization 1727 * on SMP systems in case of "apm=power-off" mode. Seen on ASUS A7M266D. 1728 * Some bioses don't like being called from CPU != 0. 1729 * Method suggested by Ingo Molnar. 1730 */ 1731 set_cpus_allowed_ptr(current, cpumask_of(0)); 1732 BUG_ON(smp_processor_id() != 0); 1733 1734 if (apm_info.connection_version == 0) { 1735 apm_info.connection_version = apm_info.bios.version; 1736 if (apm_info.connection_version > 0x100) { 1737 /* 1738 * We only support BIOSs up to version 1.2 1739 */ 1740 if (apm_info.connection_version > 0x0102) 1741 apm_info.connection_version = 0x0102; 1742 error = apm_driver_version(&apm_info.connection_version); 1743 if (error != APM_SUCCESS) { 1744 apm_error("driver version", error); 1745 /* Fall back to an APM 1.0 connection. */ 1746 apm_info.connection_version = 0x100; 1747 } 1748 } 1749 } 1750 1751 if (debug) 1752 printk(KERN_INFO "apm: Connection version %d.%d\n", 1753 (apm_info.connection_version >> 8) & 0xff, 1754 apm_info.connection_version & 0xff); 1755 1756 #ifdef CONFIG_APM_DO_ENABLE 1757 if (apm_info.bios.flags & APM_BIOS_DISABLED) { 1758 /* 1759 * This call causes my NEC UltraLite Versa 33/C to hang if it 1760 * is booted with PM disabled but not in the docking station. 1761 * Unfortunate ... 1762 */ 1763 error = apm_enable_power_management(1); 1764 if (error) { 1765 apm_error("enable power management", error); 1766 return -1; 1767 } 1768 } 1769 #endif 1770 1771 if ((apm_info.bios.flags & APM_BIOS_DISENGAGED) 1772 && (apm_info.connection_version > 0x0100)) { 1773 error = apm_engage_power_management(APM_DEVICE_ALL, 1); 1774 if (error) { 1775 apm_error("engage power management", error); 1776 return -1; 1777 } 1778 } 1779 1780 if (debug && (num_online_cpus() == 1 || smp)) { 1781 error = apm_get_power_status(&bx, &cx, &dx); 1782 if (error) 1783 printk(KERN_INFO "apm: power status not available\n"); 1784 else { 1785 switch ((bx >> 8) & 0xff) { 1786 case 0: 1787 power_stat = "off line"; 1788 break; 1789 case 1: 1790 power_stat = "on line"; 1791 break; 1792 case 2: 1793 power_stat = "on backup power"; 1794 break; 1795 default: 1796 power_stat = "unknown"; 1797 break; 1798 } 1799 switch (bx & 0xff) { 1800 case 0: 1801 bat_stat = "high"; 1802 break; 1803 case 1: 1804 bat_stat = "low"; 1805 break; 1806 case 2: 1807 bat_stat = "critical"; 1808 break; 1809 case 3: 1810 bat_stat = "charging"; 1811 break; 1812 default: 1813 bat_stat = "unknown"; 1814 break; 1815 } 1816 printk(KERN_INFO 1817 "apm: AC %s, battery status %s, battery life ", 1818 power_stat, bat_stat); 1819 if ((cx & 0xff) == 0xff) 1820 printk("unknown\n"); 1821 else 1822 printk("%d%%\n", cx & 0xff); 1823 if (apm_info.connection_version > 0x100) { 1824 printk(KERN_INFO 1825 "apm: battery flag 0x%02x, battery life ", 1826 (cx >> 8) & 0xff); 1827 if (dx == 0xffff) 1828 printk("unknown\n"); 1829 else 1830 printk("%d %s\n", dx & 0x7fff, 1831 (dx & 0x8000) ? 1832 "minutes" : "seconds"); 1833 } 1834 } 1835 } 1836 1837 /* Install our power off handler.. */ 1838 if (power_off) 1839 pm_power_off = apm_power_off; 1840 1841 if (num_online_cpus() == 1 || smp) { 1842 #if defined(CONFIG_APM_DISPLAY_BLANK) && defined(CONFIG_VT) 1843 console_blank_hook = apm_console_blank; 1844 #endif 1845 apm_mainloop(); 1846 #if defined(CONFIG_APM_DISPLAY_BLANK) && defined(CONFIG_VT) 1847 console_blank_hook = NULL; 1848 #endif 1849 } 1850 1851 return 0; 1852 } 1853 1854 #ifndef MODULE 1855 static int __init apm_setup(char *str) 1856 { 1857 int invert; 1858 1859 while ((str != NULL) && (*str != '\0')) { 1860 if (strncmp(str, "off", 3) == 0) 1861 apm_disabled = 1; 1862 if (strncmp(str, "on", 2) == 0) 1863 apm_disabled = 0; 1864 if ((strncmp(str, "bounce-interval=", 16) == 0) || 1865 (strncmp(str, "bounce_interval=", 16) == 0)) 1866 bounce_interval = simple_strtol(str + 16, NULL, 0); 1867 if ((strncmp(str, "idle-threshold=", 15) == 0) || 1868 (strncmp(str, "idle_threshold=", 15) == 0)) 1869 idle_threshold = simple_strtol(str + 15, NULL, 0); 1870 if ((strncmp(str, "idle-period=", 12) == 0) || 1871 (strncmp(str, "idle_period=", 12) == 0)) 1872 idle_period = simple_strtol(str + 12, NULL, 0); 1873 invert = (strncmp(str, "no-", 3) == 0) || 1874 (strncmp(str, "no_", 3) == 0); 1875 if (invert) 1876 str += 3; 1877 if (strncmp(str, "debug", 5) == 0) 1878 debug = !invert; 1879 if ((strncmp(str, "power-off", 9) == 0) || 1880 (strncmp(str, "power_off", 9) == 0)) 1881 power_off = !invert; 1882 if (strncmp(str, "smp", 3) == 0) { 1883 smp = !invert; 1884 idle_threshold = 100; 1885 } 1886 if ((strncmp(str, "allow-ints", 10) == 0) || 1887 (strncmp(str, "allow_ints", 10) == 0)) 1888 apm_info.allow_ints = !invert; 1889 if ((strncmp(str, "broken-psr", 10) == 0) || 1890 (strncmp(str, "broken_psr", 10) == 0)) 1891 apm_info.get_power_status_broken = !invert; 1892 if ((strncmp(str, "realmode-power-off", 18) == 0) || 1893 (strncmp(str, "realmode_power_off", 18) == 0)) 1894 apm_info.realmode_power_off = !invert; 1895 str = strchr(str, ','); 1896 if (str != NULL) 1897 str += strspn(str, ", \t"); 1898 } 1899 return 1; 1900 } 1901 1902 __setup("apm=", apm_setup); 1903 #endif 1904 1905 static const struct file_operations apm_bios_fops = { 1906 .owner = THIS_MODULE, 1907 .read = do_read, 1908 .poll = do_poll, 1909 .unlocked_ioctl = do_ioctl, 1910 .open = do_open, 1911 .release = do_release, 1912 .llseek = noop_llseek, 1913 }; 1914 1915 static struct miscdevice apm_device = { 1916 APM_MINOR_DEV, 1917 "apm_bios", 1918 &apm_bios_fops 1919 }; 1920 1921 1922 /* Simple "print if true" callback */ 1923 static int __init print_if_true(const struct dmi_system_id *d) 1924 { 1925 printk("%s\n", d->ident); 1926 return 0; 1927 } 1928 1929 /* 1930 * Some Bioses enable the PS/2 mouse (touchpad) at resume, even if it was 1931 * disabled before the suspend. Linux used to get terribly confused by that. 1932 */ 1933 static int __init broken_ps2_resume(const struct dmi_system_id *d) 1934 { 1935 printk(KERN_INFO "%s machine detected. Mousepad Resume Bug " 1936 "workaround hopefully not needed.\n", d->ident); 1937 return 0; 1938 } 1939 1940 /* Some bioses have a broken protected mode poweroff and need to use realmode */ 1941 static int __init set_realmode_power_off(const struct dmi_system_id *d) 1942 { 1943 if (apm_info.realmode_power_off == 0) { 1944 apm_info.realmode_power_off = 1; 1945 printk(KERN_INFO "%s bios detected. " 1946 "Using realmode poweroff only.\n", d->ident); 1947 } 1948 return 0; 1949 } 1950 1951 /* Some laptops require interrupts to be enabled during APM calls */ 1952 static int __init set_apm_ints(const struct dmi_system_id *d) 1953 { 1954 if (apm_info.allow_ints == 0) { 1955 apm_info.allow_ints = 1; 1956 printk(KERN_INFO "%s machine detected. " 1957 "Enabling interrupts during APM calls.\n", d->ident); 1958 } 1959 return 0; 1960 } 1961 1962 /* Some APM bioses corrupt memory or just plain do not work */ 1963 static int __init apm_is_horked(const struct dmi_system_id *d) 1964 { 1965 if (apm_info.disabled == 0) { 1966 apm_info.disabled = 1; 1967 printk(KERN_INFO "%s machine detected. " 1968 "Disabling APM.\n", d->ident); 1969 } 1970 return 0; 1971 } 1972 1973 static int __init apm_is_horked_d850md(const struct dmi_system_id *d) 1974 { 1975 if (apm_info.disabled == 0) { 1976 apm_info.disabled = 1; 1977 printk(KERN_INFO "%s machine detected. " 1978 "Disabling APM.\n", d->ident); 1979 printk(KERN_INFO "This bug is fixed in bios P15 which is available for\n"); 1980 printk(KERN_INFO "download from support.intel.com\n"); 1981 } 1982 return 0; 1983 } 1984 1985 /* Some APM bioses hang on APM idle calls */ 1986 static int __init apm_likes_to_melt(const struct dmi_system_id *d) 1987 { 1988 if (apm_info.forbid_idle == 0) { 1989 apm_info.forbid_idle = 1; 1990 printk(KERN_INFO "%s machine detected. " 1991 "Disabling APM idle calls.\n", d->ident); 1992 } 1993 return 0; 1994 } 1995 1996 /* 1997 * Check for clue free BIOS implementations who use 1998 * the following QA technique 1999 * 2000 * [ Write BIOS Code ]<------ 2001 * | ^ 2002 * < Does it Compile >----N-- 2003 * |Y ^ 2004 * < Does it Boot Win98 >-N-- 2005 * |Y 2006 * [Ship It] 2007 * 2008 * Phoenix A04 08/24/2000 is known bad (Dell Inspiron 5000e) 2009 * Phoenix A07 09/29/2000 is known good (Dell Inspiron 5000) 2010 */ 2011 static int __init broken_apm_power(const struct dmi_system_id *d) 2012 { 2013 apm_info.get_power_status_broken = 1; 2014 printk(KERN_WARNING "BIOS strings suggest APM bugs, " 2015 "disabling power status reporting.\n"); 2016 return 0; 2017 } 2018 2019 /* 2020 * This bios swaps the APM minute reporting bytes over (Many sony laptops 2021 * have this problem). 2022 */ 2023 static int __init swab_apm_power_in_minutes(const struct dmi_system_id *d) 2024 { 2025 apm_info.get_power_status_swabinminutes = 1; 2026 printk(KERN_WARNING "BIOS strings suggest APM reports battery life " 2027 "in minutes and wrong byte order.\n"); 2028 return 0; 2029 } 2030 2031 static const struct dmi_system_id apm_dmi_table[] __initconst = { 2032 { 2033 print_if_true, 2034 KERN_WARNING "IBM T23 - BIOS 1.03b+ and controller firmware 1.02+ may be needed for Linux APM.", 2035 { DMI_MATCH(DMI_SYS_VENDOR, "IBM"), 2036 DMI_MATCH(DMI_BIOS_VERSION, "1AET38WW (1.01b)"), }, 2037 }, 2038 { /* Handle problems with APM on the C600 */ 2039 broken_ps2_resume, "Dell Latitude C600", 2040 { DMI_MATCH(DMI_SYS_VENDOR, "Dell"), 2041 DMI_MATCH(DMI_PRODUCT_NAME, "Latitude C600"), }, 2042 }, 2043 { /* Allow interrupts during suspend on Dell Latitude laptops*/ 2044 set_apm_ints, "Dell Latitude", 2045 { DMI_MATCH(DMI_SYS_VENDOR, "Dell Computer Corporation"), 2046 DMI_MATCH(DMI_PRODUCT_NAME, "Latitude C510"), } 2047 }, 2048 { /* APM crashes */ 2049 apm_is_horked, "Dell Inspiron 2500", 2050 { DMI_MATCH(DMI_SYS_VENDOR, "Dell Computer Corporation"), 2051 DMI_MATCH(DMI_PRODUCT_NAME, "Inspiron 2500"), 2052 DMI_MATCH(DMI_BIOS_VENDOR, "Phoenix Technologies LTD"), 2053 DMI_MATCH(DMI_BIOS_VERSION, "A11"), }, 2054 }, 2055 { /* Allow interrupts during suspend on Dell Inspiron laptops*/ 2056 set_apm_ints, "Dell Inspiron", { 2057 DMI_MATCH(DMI_SYS_VENDOR, "Dell Computer Corporation"), 2058 DMI_MATCH(DMI_PRODUCT_NAME, "Inspiron 4000"), }, 2059 }, 2060 { /* Handle problems with APM on Inspiron 5000e */ 2061 broken_apm_power, "Dell Inspiron 5000e", 2062 { DMI_MATCH(DMI_BIOS_VENDOR, "Phoenix Technologies LTD"), 2063 DMI_MATCH(DMI_BIOS_VERSION, "A04"), 2064 DMI_MATCH(DMI_BIOS_DATE, "08/24/2000"), }, 2065 }, 2066 { /* Handle problems with APM on Inspiron 2500 */ 2067 broken_apm_power, "Dell Inspiron 2500", 2068 { DMI_MATCH(DMI_BIOS_VENDOR, "Phoenix Technologies LTD"), 2069 DMI_MATCH(DMI_BIOS_VERSION, "A12"), 2070 DMI_MATCH(DMI_BIOS_DATE, "02/04/2002"), }, 2071 }, 2072 { /* APM crashes */ 2073 apm_is_horked, "Dell Dimension 4100", 2074 { DMI_MATCH(DMI_SYS_VENDOR, "Dell Computer Corporation"), 2075 DMI_MATCH(DMI_PRODUCT_NAME, "XPS-Z"), 2076 DMI_MATCH(DMI_BIOS_VENDOR, "Intel Corp."), 2077 DMI_MATCH(DMI_BIOS_VERSION, "A11"), }, 2078 }, 2079 { /* Allow interrupts during suspend on Compaq Laptops*/ 2080 set_apm_ints, "Compaq 12XL125", 2081 { DMI_MATCH(DMI_SYS_VENDOR, "Compaq"), 2082 DMI_MATCH(DMI_PRODUCT_NAME, "Compaq PC"), 2083 DMI_MATCH(DMI_BIOS_VENDOR, "Phoenix Technologies LTD"), 2084 DMI_MATCH(DMI_BIOS_VERSION, "4.06"), }, 2085 }, 2086 { /* Allow interrupts during APM or the clock goes slow */ 2087 set_apm_ints, "ASUSTeK", 2088 { DMI_MATCH(DMI_SYS_VENDOR, "ASUSTeK Computer Inc."), 2089 DMI_MATCH(DMI_PRODUCT_NAME, "L8400K series Notebook PC"), }, 2090 }, 2091 { /* APM blows on shutdown */ 2092 apm_is_horked, "ABIT KX7-333[R]", 2093 { DMI_MATCH(DMI_BOARD_VENDOR, "ABIT"), 2094 DMI_MATCH(DMI_BOARD_NAME, "VT8367-8233A (KX7-333[R])"), }, 2095 }, 2096 { /* APM crashes */ 2097 apm_is_horked, "Trigem Delhi3", 2098 { DMI_MATCH(DMI_SYS_VENDOR, "TriGem Computer, Inc"), 2099 DMI_MATCH(DMI_PRODUCT_NAME, "Delhi3"), }, 2100 }, 2101 { /* APM crashes */ 2102 apm_is_horked, "Fujitsu-Siemens", 2103 { DMI_MATCH(DMI_BIOS_VENDOR, "hoenix/FUJITSU SIEMENS"), 2104 DMI_MATCH(DMI_BIOS_VERSION, "Version1.01"), }, 2105 }, 2106 { /* APM crashes */ 2107 apm_is_horked_d850md, "Intel D850MD", 2108 { DMI_MATCH(DMI_BIOS_VENDOR, "Intel Corp."), 2109 DMI_MATCH(DMI_BIOS_VERSION, "MV85010A.86A.0016.P07.0201251536"), }, 2110 }, 2111 { /* APM crashes */ 2112 apm_is_horked, "Intel D810EMO", 2113 { DMI_MATCH(DMI_BIOS_VENDOR, "Intel Corp."), 2114 DMI_MATCH(DMI_BIOS_VERSION, "MO81010A.86A.0008.P04.0004170800"), }, 2115 }, 2116 { /* APM crashes */ 2117 apm_is_horked, "Dell XPS-Z", 2118 { DMI_MATCH(DMI_BIOS_VENDOR, "Intel Corp."), 2119 DMI_MATCH(DMI_BIOS_VERSION, "A11"), 2120 DMI_MATCH(DMI_PRODUCT_NAME, "XPS-Z"), }, 2121 }, 2122 { /* APM crashes */ 2123 apm_is_horked, "Sharp PC-PJ/AX", 2124 { DMI_MATCH(DMI_SYS_VENDOR, "SHARP"), 2125 DMI_MATCH(DMI_PRODUCT_NAME, "PC-PJ/AX"), 2126 DMI_MATCH(DMI_BIOS_VENDOR, "SystemSoft"), 2127 DMI_MATCH(DMI_BIOS_VERSION, "Version R2.08"), }, 2128 }, 2129 { /* APM crashes */ 2130 apm_is_horked, "Dell Inspiron 2500", 2131 { DMI_MATCH(DMI_SYS_VENDOR, "Dell Computer Corporation"), 2132 DMI_MATCH(DMI_PRODUCT_NAME, "Inspiron 2500"), 2133 DMI_MATCH(DMI_BIOS_VENDOR, "Phoenix Technologies LTD"), 2134 DMI_MATCH(DMI_BIOS_VERSION, "A11"), }, 2135 }, 2136 { /* APM idle hangs */ 2137 apm_likes_to_melt, "Jabil AMD", 2138 { DMI_MATCH(DMI_BIOS_VENDOR, "American Megatrends Inc."), 2139 DMI_MATCH(DMI_BIOS_VERSION, "0AASNP06"), }, 2140 }, 2141 { /* APM idle hangs */ 2142 apm_likes_to_melt, "AMI Bios", 2143 { DMI_MATCH(DMI_BIOS_VENDOR, "American Megatrends Inc."), 2144 DMI_MATCH(DMI_BIOS_VERSION, "0AASNP05"), }, 2145 }, 2146 { /* Handle problems with APM on Sony Vaio PCG-N505X(DE) */ 2147 swab_apm_power_in_minutes, "Sony VAIO", 2148 { DMI_MATCH(DMI_BIOS_VENDOR, "Phoenix Technologies LTD"), 2149 DMI_MATCH(DMI_BIOS_VERSION, "R0206H"), 2150 DMI_MATCH(DMI_BIOS_DATE, "08/23/99"), }, 2151 }, 2152 { /* Handle problems with APM on Sony Vaio PCG-N505VX */ 2153 swab_apm_power_in_minutes, "Sony VAIO", 2154 { DMI_MATCH(DMI_BIOS_VENDOR, "Phoenix Technologies LTD"), 2155 DMI_MATCH(DMI_BIOS_VERSION, "W2K06H0"), 2156 DMI_MATCH(DMI_BIOS_DATE, "02/03/00"), }, 2157 }, 2158 { /* Handle problems with APM on Sony Vaio PCG-XG29 */ 2159 swab_apm_power_in_minutes, "Sony VAIO", 2160 { DMI_MATCH(DMI_BIOS_VENDOR, "Phoenix Technologies LTD"), 2161 DMI_MATCH(DMI_BIOS_VERSION, "R0117A0"), 2162 DMI_MATCH(DMI_BIOS_DATE, "04/25/00"), }, 2163 }, 2164 { /* Handle problems with APM on Sony Vaio PCG-Z600NE */ 2165 swab_apm_power_in_minutes, "Sony VAIO", 2166 { DMI_MATCH(DMI_BIOS_VENDOR, "Phoenix Technologies LTD"), 2167 DMI_MATCH(DMI_BIOS_VERSION, "R0121Z1"), 2168 DMI_MATCH(DMI_BIOS_DATE, "05/11/00"), }, 2169 }, 2170 { /* Handle problems with APM on Sony Vaio PCG-Z600NE */ 2171 swab_apm_power_in_minutes, "Sony VAIO", 2172 { DMI_MATCH(DMI_BIOS_VENDOR, "Phoenix Technologies LTD"), 2173 DMI_MATCH(DMI_BIOS_VERSION, "WME01Z1"), 2174 DMI_MATCH(DMI_BIOS_DATE, "08/11/00"), }, 2175 }, 2176 { /* Handle problems with APM on Sony Vaio PCG-Z600LEK(DE) */ 2177 swab_apm_power_in_minutes, "Sony VAIO", 2178 { DMI_MATCH(DMI_BIOS_VENDOR, "Phoenix Technologies LTD"), 2179 DMI_MATCH(DMI_BIOS_VERSION, "R0206Z3"), 2180 DMI_MATCH(DMI_BIOS_DATE, "12/25/00"), }, 2181 }, 2182 { /* Handle problems with APM on Sony Vaio PCG-Z505LS */ 2183 swab_apm_power_in_minutes, "Sony VAIO", 2184 { DMI_MATCH(DMI_BIOS_VENDOR, "Phoenix Technologies LTD"), 2185 DMI_MATCH(DMI_BIOS_VERSION, "R0203D0"), 2186 DMI_MATCH(DMI_BIOS_DATE, "05/12/00"), }, 2187 }, 2188 { /* Handle problems with APM on Sony Vaio PCG-Z505LS */ 2189 swab_apm_power_in_minutes, "Sony VAIO", 2190 { DMI_MATCH(DMI_BIOS_VENDOR, "Phoenix Technologies LTD"), 2191 DMI_MATCH(DMI_BIOS_VERSION, "R0203Z3"), 2192 DMI_MATCH(DMI_BIOS_DATE, "08/25/00"), }, 2193 }, 2194 { /* Handle problems with APM on Sony Vaio PCG-Z505LS (with updated BIOS) */ 2195 swab_apm_power_in_minutes, "Sony VAIO", 2196 { DMI_MATCH(DMI_BIOS_VENDOR, "Phoenix Technologies LTD"), 2197 DMI_MATCH(DMI_BIOS_VERSION, "R0209Z3"), 2198 DMI_MATCH(DMI_BIOS_DATE, "05/12/01"), }, 2199 }, 2200 { /* Handle problems with APM on Sony Vaio PCG-F104K */ 2201 swab_apm_power_in_minutes, "Sony VAIO", 2202 { DMI_MATCH(DMI_BIOS_VENDOR, "Phoenix Technologies LTD"), 2203 DMI_MATCH(DMI_BIOS_VERSION, "R0204K2"), 2204 DMI_MATCH(DMI_BIOS_DATE, "08/28/00"), }, 2205 }, 2206 2207 { /* Handle problems with APM on Sony Vaio PCG-C1VN/C1VE */ 2208 swab_apm_power_in_minutes, "Sony VAIO", 2209 { DMI_MATCH(DMI_BIOS_VENDOR, "Phoenix Technologies LTD"), 2210 DMI_MATCH(DMI_BIOS_VERSION, "R0208P1"), 2211 DMI_MATCH(DMI_BIOS_DATE, "11/09/00"), }, 2212 }, 2213 { /* Handle problems with APM on Sony Vaio PCG-C1VE */ 2214 swab_apm_power_in_minutes, "Sony VAIO", 2215 { DMI_MATCH(DMI_BIOS_VENDOR, "Phoenix Technologies LTD"), 2216 DMI_MATCH(DMI_BIOS_VERSION, "R0204P1"), 2217 DMI_MATCH(DMI_BIOS_DATE, "09/12/00"), }, 2218 }, 2219 { /* Handle problems with APM on Sony Vaio PCG-C1VE */ 2220 swab_apm_power_in_minutes, "Sony VAIO", 2221 { DMI_MATCH(DMI_BIOS_VENDOR, "Phoenix Technologies LTD"), 2222 DMI_MATCH(DMI_BIOS_VERSION, "WXPO1Z3"), 2223 DMI_MATCH(DMI_BIOS_DATE, "10/26/01"), }, 2224 }, 2225 { /* broken PM poweroff bios */ 2226 set_realmode_power_off, "Award Software v4.60 PGMA", 2227 { DMI_MATCH(DMI_BIOS_VENDOR, "Award Software International, Inc."), 2228 DMI_MATCH(DMI_BIOS_VERSION, "4.60 PGMA"), 2229 DMI_MATCH(DMI_BIOS_DATE, "134526184"), }, 2230 }, 2231 2232 /* Generic per vendor APM settings */ 2233 2234 { /* Allow interrupts during suspend on IBM laptops */ 2235 set_apm_ints, "IBM", 2236 { DMI_MATCH(DMI_SYS_VENDOR, "IBM"), }, 2237 }, 2238 2239 { } 2240 }; 2241 2242 /* 2243 * Just start the APM thread. We do NOT want to do APM BIOS 2244 * calls from anything but the APM thread, if for no other reason 2245 * than the fact that we don't trust the APM BIOS. This way, 2246 * most common APM BIOS problems that lead to protection errors 2247 * etc will have at least some level of being contained... 2248 * 2249 * In short, if something bad happens, at least we have a choice 2250 * of just killing the apm thread.. 2251 */ 2252 static int __init apm_init(void) 2253 { 2254 struct desc_struct *gdt; 2255 int err; 2256 2257 dmi_check_system(apm_dmi_table); 2258 2259 if (apm_info.bios.version == 0 || machine_is_olpc()) { 2260 printk(KERN_INFO "apm: BIOS not found.\n"); 2261 return -ENODEV; 2262 } 2263 printk(KERN_INFO 2264 "apm: BIOS version %d.%d Flags 0x%02x (Driver version %s)\n", 2265 ((apm_info.bios.version >> 8) & 0xff), 2266 (apm_info.bios.version & 0xff), 2267 apm_info.bios.flags, 2268 driver_version); 2269 if ((apm_info.bios.flags & APM_32_BIT_SUPPORT) == 0) { 2270 printk(KERN_INFO "apm: no 32 bit BIOS support\n"); 2271 return -ENODEV; 2272 } 2273 2274 if (allow_ints) 2275 apm_info.allow_ints = 1; 2276 if (broken_psr) 2277 apm_info.get_power_status_broken = 1; 2278 if (realmode_power_off) 2279 apm_info.realmode_power_off = 1; 2280 /* User can override, but default is to trust DMI */ 2281 if (apm_disabled != -1) 2282 apm_info.disabled = apm_disabled; 2283 2284 /* 2285 * Fix for the Compaq Contura 3/25c which reports BIOS version 0.1 2286 * but is reportedly a 1.0 BIOS. 2287 */ 2288 if (apm_info.bios.version == 0x001) 2289 apm_info.bios.version = 0x100; 2290 2291 /* BIOS < 1.2 doesn't set cseg_16_len */ 2292 if (apm_info.bios.version < 0x102) 2293 apm_info.bios.cseg_16_len = 0; /* 64k */ 2294 2295 if (debug) { 2296 printk(KERN_INFO "apm: entry %x:%x cseg16 %x dseg %x", 2297 apm_info.bios.cseg, apm_info.bios.offset, 2298 apm_info.bios.cseg_16, apm_info.bios.dseg); 2299 if (apm_info.bios.version > 0x100) 2300 printk(" cseg len %x, dseg len %x", 2301 apm_info.bios.cseg_len, 2302 apm_info.bios.dseg_len); 2303 if (apm_info.bios.version > 0x101) 2304 printk(" cseg16 len %x", apm_info.bios.cseg_16_len); 2305 printk("\n"); 2306 } 2307 2308 if (apm_info.disabled) { 2309 pr_notice("disabled on user request.\n"); 2310 return -ENODEV; 2311 } 2312 if ((num_online_cpus() > 1) && !power_off && !smp) { 2313 pr_notice("disabled - APM is not SMP safe.\n"); 2314 apm_info.disabled = 1; 2315 return -ENODEV; 2316 } 2317 if (!acpi_disabled) { 2318 pr_notice("overridden by ACPI.\n"); 2319 apm_info.disabled = 1; 2320 return -ENODEV; 2321 } 2322 2323 /* 2324 * Set up the long jump entry point to the APM BIOS, which is called 2325 * from inline assembly. 2326 */ 2327 apm_bios_entry.offset = apm_info.bios.offset; 2328 apm_bios_entry.segment = APM_CS; 2329 2330 /* 2331 * The APM 1.1 BIOS is supposed to provide limit information that it 2332 * recognizes. Many machines do this correctly, but many others do 2333 * not restrict themselves to their claimed limit. When this happens, 2334 * they will cause a segmentation violation in the kernel at boot time. 2335 * Most BIOS's, however, will respect a 64k limit, so we use that. 2336 * 2337 * Note we only set APM segments on CPU zero, since we pin the APM 2338 * code to that CPU. 2339 */ 2340 gdt = get_cpu_gdt_rw(0); 2341 set_desc_base(&gdt[APM_CS >> 3], 2342 (unsigned long)__va((unsigned long)apm_info.bios.cseg << 4)); 2343 set_desc_base(&gdt[APM_CS_16 >> 3], 2344 (unsigned long)__va((unsigned long)apm_info.bios.cseg_16 << 4)); 2345 set_desc_base(&gdt[APM_DS >> 3], 2346 (unsigned long)__va((unsigned long)apm_info.bios.dseg << 4)); 2347 2348 proc_create_single("apm", 0, NULL, proc_apm_show); 2349 2350 kapmd_task = kthread_create(apm, NULL, "kapmd"); 2351 if (IS_ERR(kapmd_task)) { 2352 pr_err("disabled - Unable to start kernel thread\n"); 2353 err = PTR_ERR(kapmd_task); 2354 kapmd_task = NULL; 2355 remove_proc_entry("apm", NULL); 2356 return err; 2357 } 2358 wake_up_process(kapmd_task); 2359 2360 if (num_online_cpus() > 1 && !smp) { 2361 printk(KERN_NOTICE 2362 "apm: disabled - APM is not SMP safe (power off active).\n"); 2363 return 0; 2364 } 2365 2366 /* 2367 * Note we don't actually care if the misc_device cannot be registered. 2368 * this driver can do its job without it, even if userspace can't 2369 * control it. just log the error 2370 */ 2371 if (misc_register(&apm_device)) 2372 printk(KERN_WARNING "apm: Could not register misc device.\n"); 2373 2374 if (HZ != 100) 2375 idle_period = (idle_period * HZ) / 100; 2376 if (idle_threshold < 100) { 2377 cpuidle_poll_state_init(&apm_idle_driver); 2378 if (!cpuidle_register_driver(&apm_idle_driver)) 2379 if (cpuidle_register_device(&apm_cpuidle_device)) 2380 cpuidle_unregister_driver(&apm_idle_driver); 2381 } 2382 2383 return 0; 2384 } 2385 2386 static void __exit apm_exit(void) 2387 { 2388 int error; 2389 2390 cpuidle_unregister_device(&apm_cpuidle_device); 2391 cpuidle_unregister_driver(&apm_idle_driver); 2392 2393 if (((apm_info.bios.flags & APM_BIOS_DISENGAGED) == 0) 2394 && (apm_info.connection_version > 0x0100)) { 2395 error = apm_engage_power_management(APM_DEVICE_ALL, 0); 2396 if (error) 2397 apm_error("disengage power management", error); 2398 } 2399 misc_deregister(&apm_device); 2400 remove_proc_entry("apm", NULL); 2401 if (power_off) 2402 pm_power_off = NULL; 2403 if (kapmd_task) { 2404 kthread_stop(kapmd_task); 2405 kapmd_task = NULL; 2406 } 2407 } 2408 2409 module_init(apm_init); 2410 module_exit(apm_exit); 2411 2412 MODULE_AUTHOR("Stephen Rothwell"); 2413 MODULE_DESCRIPTION("Advanced Power Management"); 2414 MODULE_LICENSE("GPL"); 2415 module_param(debug, bool, 0644); 2416 MODULE_PARM_DESC(debug, "Enable debug mode"); 2417 module_param(power_off, bool, 0444); 2418 MODULE_PARM_DESC(power_off, "Enable power off"); 2419 module_param(bounce_interval, int, 0444); 2420 MODULE_PARM_DESC(bounce_interval, 2421 "Set the number of ticks to ignore suspend bounces"); 2422 module_param(allow_ints, bool, 0444); 2423 MODULE_PARM_DESC(allow_ints, "Allow interrupts during BIOS calls"); 2424 module_param(broken_psr, bool, 0444); 2425 MODULE_PARM_DESC(broken_psr, "BIOS has a broken GetPowerStatus call"); 2426 module_param(realmode_power_off, bool, 0444); 2427 MODULE_PARM_DESC(realmode_power_off, 2428 "Switch to real mode before powering off"); 2429 module_param(idle_threshold, int, 0444); 2430 MODULE_PARM_DESC(idle_threshold, 2431 "System idle percentage above which to make APM BIOS idle calls"); 2432 module_param(idle_period, int, 0444); 2433 MODULE_PARM_DESC(idle_period, 2434 "Period (in sec/100) over which to calculate the idle percentage"); 2435 module_param(smp, bool, 0444); 2436 MODULE_PARM_DESC(smp, 2437 "Set this to enable APM use on an SMP platform. Use with caution on older systems"); 2438 MODULE_ALIAS_MISCDEV(APM_MINOR_DEV); 2439