xref: /openbmc/linux/arch/x86/kernel/acpi/cstate.c (revision 12eb4683)
1 /*
2  * Copyright (C) 2005 Intel Corporation
3  * 	Venkatesh Pallipadi <venkatesh.pallipadi@intel.com>
4  * 	- Added _PDC for SMP C-states on Intel CPUs
5  */
6 
7 #include <linux/kernel.h>
8 #include <linux/module.h>
9 #include <linux/init.h>
10 #include <linux/acpi.h>
11 #include <linux/cpu.h>
12 #include <linux/sched.h>
13 
14 #include <acpi/processor.h>
15 #include <asm/acpi.h>
16 #include <asm/mwait.h>
17 #include <asm/special_insns.h>
18 
19 /*
20  * Initialize bm_flags based on the CPU cache properties
21  * On SMP it depends on cache configuration
22  * - When cache is not shared among all CPUs, we flush cache
23  *   before entering C3.
24  * - When cache is shared among all CPUs, we use bm_check
25  *   mechanism as in UP case
26  *
27  * This routine is called only after all the CPUs are online
28  */
29 void acpi_processor_power_init_bm_check(struct acpi_processor_flags *flags,
30 					unsigned int cpu)
31 {
32 	struct cpuinfo_x86 *c = &cpu_data(cpu);
33 
34 	flags->bm_check = 0;
35 	if (num_online_cpus() == 1)
36 		flags->bm_check = 1;
37 	else if (c->x86_vendor == X86_VENDOR_INTEL) {
38 		/*
39 		 * Today all MP CPUs that support C3 share cache.
40 		 * And caches should not be flushed by software while
41 		 * entering C3 type state.
42 		 */
43 		flags->bm_check = 1;
44 	}
45 
46 	/*
47 	 * On all recent Intel platforms, ARB_DISABLE is a nop.
48 	 * So, set bm_control to zero to indicate that ARB_DISABLE
49 	 * is not required while entering C3 type state on
50 	 * P4, Core and beyond CPUs
51 	 */
52 	if (c->x86_vendor == X86_VENDOR_INTEL &&
53 	    (c->x86 > 0xf || (c->x86 == 6 && c->x86_model >= 0x0f)))
54 			flags->bm_control = 0;
55 }
56 EXPORT_SYMBOL(acpi_processor_power_init_bm_check);
57 
58 /* The code below handles cstate entry with monitor-mwait pair on Intel*/
59 
60 struct cstate_entry {
61 	struct {
62 		unsigned int eax;
63 		unsigned int ecx;
64 	} states[ACPI_PROCESSOR_MAX_POWER];
65 };
66 static struct cstate_entry __percpu *cpu_cstate_entry;	/* per CPU ptr */
67 
68 static short mwait_supported[ACPI_PROCESSOR_MAX_POWER];
69 
70 #define NATIVE_CSTATE_BEYOND_HALT	(2)
71 
72 static long acpi_processor_ffh_cstate_probe_cpu(void *_cx)
73 {
74 	struct acpi_processor_cx *cx = _cx;
75 	long retval;
76 	unsigned int eax, ebx, ecx, edx;
77 	unsigned int edx_part;
78 	unsigned int cstate_type; /* C-state type and not ACPI C-state type */
79 	unsigned int num_cstate_subtype;
80 
81 	cpuid(CPUID_MWAIT_LEAF, &eax, &ebx, &ecx, &edx);
82 
83 	/* Check whether this particular cx_type (in CST) is supported or not */
84 	cstate_type = ((cx->address >> MWAIT_SUBSTATE_SIZE) &
85 			MWAIT_CSTATE_MASK) + 1;
86 	edx_part = edx >> (cstate_type * MWAIT_SUBSTATE_SIZE);
87 	num_cstate_subtype = edx_part & MWAIT_SUBSTATE_MASK;
88 
89 	retval = 0;
90 	if (num_cstate_subtype < (cx->address & MWAIT_SUBSTATE_MASK)) {
91 		retval = -1;
92 		goto out;
93 	}
94 
95 	/* mwait ecx extensions INTERRUPT_BREAK should be supported for C2/C3 */
96 	if (!(ecx & CPUID5_ECX_EXTENSIONS_SUPPORTED) ||
97 	    !(ecx & CPUID5_ECX_INTERRUPT_BREAK)) {
98 		retval = -1;
99 		goto out;
100 	}
101 
102 	if (!mwait_supported[cstate_type]) {
103 		mwait_supported[cstate_type] = 1;
104 		printk(KERN_DEBUG
105 			"Monitor-Mwait will be used to enter C-%d "
106 			"state\n", cx->type);
107 	}
108 	snprintf(cx->desc,
109 			ACPI_CX_DESC_LEN, "ACPI FFH INTEL MWAIT 0x%x",
110 			cx->address);
111 out:
112 	return retval;
113 }
114 
115 int acpi_processor_ffh_cstate_probe(unsigned int cpu,
116 		struct acpi_processor_cx *cx, struct acpi_power_register *reg)
117 {
118 	struct cstate_entry *percpu_entry;
119 	struct cpuinfo_x86 *c = &cpu_data(cpu);
120 	long retval;
121 
122 	if (!cpu_cstate_entry || c->cpuid_level < CPUID_MWAIT_LEAF)
123 		return -1;
124 
125 	if (reg->bit_offset != NATIVE_CSTATE_BEYOND_HALT)
126 		return -1;
127 
128 	percpu_entry = per_cpu_ptr(cpu_cstate_entry, cpu);
129 	percpu_entry->states[cx->index].eax = 0;
130 	percpu_entry->states[cx->index].ecx = 0;
131 
132 	/* Make sure we are running on right CPU */
133 
134 	retval = work_on_cpu(cpu, acpi_processor_ffh_cstate_probe_cpu, cx);
135 	if (retval == 0) {
136 		/* Use the hint in CST */
137 		percpu_entry->states[cx->index].eax = cx->address;
138 		percpu_entry->states[cx->index].ecx = MWAIT_ECX_INTERRUPT_BREAK;
139 	}
140 
141 	/*
142 	 * For _CST FFH on Intel, if GAS.access_size bit 1 is cleared,
143 	 * then we should skip checking BM_STS for this C-state.
144 	 * ref: "Intel Processor Vendor-Specific ACPI Interface Specification"
145 	 */
146 	if ((c->x86_vendor == X86_VENDOR_INTEL) && !(reg->access_size & 0x2))
147 		cx->bm_sts_skip = 1;
148 
149 	return retval;
150 }
151 EXPORT_SYMBOL_GPL(acpi_processor_ffh_cstate_probe);
152 
153 /*
154  * This uses new MONITOR/MWAIT instructions on P4 processors with PNI,
155  * which can obviate IPI to trigger checking of need_resched.
156  * We execute MONITOR against need_resched and enter optimized wait state
157  * through MWAIT. Whenever someone changes need_resched, we would be woken
158  * up from MWAIT (without an IPI).
159  *
160  * New with Core Duo processors, MWAIT can take some hints based on CPU
161  * capability.
162  */
163 void mwait_idle_with_hints(unsigned long ax, unsigned long cx)
164 {
165 	if (!need_resched()) {
166 		if (this_cpu_has(X86_FEATURE_CLFLUSH_MONITOR))
167 			clflush((void *)&current_thread_info()->flags);
168 
169 		__monitor((void *)&current_thread_info()->flags, 0, 0);
170 		smp_mb();
171 		if (!need_resched())
172 			__mwait(ax, cx);
173 	}
174 }
175 
176 void acpi_processor_ffh_cstate_enter(struct acpi_processor_cx *cx)
177 {
178 	unsigned int cpu = smp_processor_id();
179 	struct cstate_entry *percpu_entry;
180 
181 	percpu_entry = per_cpu_ptr(cpu_cstate_entry, cpu);
182 	mwait_idle_with_hints(percpu_entry->states[cx->index].eax,
183 	                      percpu_entry->states[cx->index].ecx);
184 }
185 EXPORT_SYMBOL_GPL(acpi_processor_ffh_cstate_enter);
186 
187 static int __init ffh_cstate_init(void)
188 {
189 	struct cpuinfo_x86 *c = &boot_cpu_data;
190 	if (c->x86_vendor != X86_VENDOR_INTEL)
191 		return -1;
192 
193 	cpu_cstate_entry = alloc_percpu(struct cstate_entry);
194 	return 0;
195 }
196 
197 static void __exit ffh_cstate_exit(void)
198 {
199 	free_percpu(cpu_cstate_entry);
200 	cpu_cstate_entry = NULL;
201 }
202 
203 arch_initcall(ffh_cstate_init);
204 __exitcall(ffh_cstate_exit);
205