1 /* SPDX-License-Identifier: GPL-2.0 WITH Linux-syscall-note */ 2 #ifndef _ASM_X86_BOOTPARAM_H 3 #define _ASM_X86_BOOTPARAM_H 4 5 /* setup_data/setup_indirect types */ 6 #define SETUP_NONE 0 7 #define SETUP_E820_EXT 1 8 #define SETUP_DTB 2 9 #define SETUP_PCI 3 10 #define SETUP_EFI 4 11 #define SETUP_APPLE_PROPERTIES 5 12 #define SETUP_JAILHOUSE 6 13 #define SETUP_CC_BLOB 7 14 #define SETUP_IMA 8 15 #define SETUP_RNG_SEED 9 16 #define SETUP_ENUM_MAX SETUP_RNG_SEED 17 18 #define SETUP_INDIRECT (1<<31) 19 #define SETUP_TYPE_MAX (SETUP_ENUM_MAX | SETUP_INDIRECT) 20 21 /* ram_size flags */ 22 #define RAMDISK_IMAGE_START_MASK 0x07FF 23 #define RAMDISK_PROMPT_FLAG 0x8000 24 #define RAMDISK_LOAD_FLAG 0x4000 25 26 /* loadflags */ 27 #define LOADED_HIGH (1<<0) 28 #define KASLR_FLAG (1<<1) 29 #define QUIET_FLAG (1<<5) 30 #define KEEP_SEGMENTS (1<<6) 31 #define CAN_USE_HEAP (1<<7) 32 33 /* xloadflags */ 34 #define XLF_KERNEL_64 (1<<0) 35 #define XLF_CAN_BE_LOADED_ABOVE_4G (1<<1) 36 #define XLF_EFI_HANDOVER_32 (1<<2) 37 #define XLF_EFI_HANDOVER_64 (1<<3) 38 #define XLF_EFI_KEXEC (1<<4) 39 #define XLF_5LEVEL (1<<5) 40 #define XLF_5LEVEL_ENABLED (1<<6) 41 42 #ifndef __ASSEMBLY__ 43 44 #include <linux/types.h> 45 #include <linux/screen_info.h> 46 #include <linux/apm_bios.h> 47 #include <linux/edd.h> 48 #include <asm/ist.h> 49 #include <video/edid.h> 50 51 /* extensible setup data list node */ 52 struct setup_data { 53 __u64 next; 54 __u32 type; 55 __u32 len; 56 __u8 data[]; 57 }; 58 59 /* extensible setup indirect data node */ 60 struct setup_indirect { 61 __u32 type; 62 __u32 reserved; /* Reserved, must be set to zero. */ 63 __u64 len; 64 __u64 addr; 65 }; 66 67 struct setup_header { 68 __u8 setup_sects; 69 __u16 root_flags; 70 __u32 syssize; 71 __u16 ram_size; 72 __u16 vid_mode; 73 __u16 root_dev; 74 __u16 boot_flag; 75 __u16 jump; 76 __u32 header; 77 __u16 version; 78 __u32 realmode_swtch; 79 __u16 start_sys_seg; 80 __u16 kernel_version; 81 __u8 type_of_loader; 82 __u8 loadflags; 83 __u16 setup_move_size; 84 __u32 code32_start; 85 __u32 ramdisk_image; 86 __u32 ramdisk_size; 87 __u32 bootsect_kludge; 88 __u16 heap_end_ptr; 89 __u8 ext_loader_ver; 90 __u8 ext_loader_type; 91 __u32 cmd_line_ptr; 92 __u32 initrd_addr_max; 93 __u32 kernel_alignment; 94 __u8 relocatable_kernel; 95 __u8 min_alignment; 96 __u16 xloadflags; 97 __u32 cmdline_size; 98 __u32 hardware_subarch; 99 __u64 hardware_subarch_data; 100 __u32 payload_offset; 101 __u32 payload_length; 102 __u64 setup_data; 103 __u64 pref_address; 104 __u32 init_size; 105 __u32 handover_offset; 106 __u32 kernel_info_offset; 107 } __attribute__((packed)); 108 109 struct sys_desc_table { 110 __u16 length; 111 __u8 table[14]; 112 }; 113 114 /* Gleaned from OFW's set-parameters in cpu/x86/pc/linux.fth */ 115 struct olpc_ofw_header { 116 __u32 ofw_magic; /* OFW signature */ 117 __u32 ofw_version; 118 __u32 cif_handler; /* callback into OFW */ 119 __u32 irq_desc_table; 120 } __attribute__((packed)); 121 122 struct efi_info { 123 __u32 efi_loader_signature; 124 __u32 efi_systab; 125 __u32 efi_memdesc_size; 126 __u32 efi_memdesc_version; 127 __u32 efi_memmap; 128 __u32 efi_memmap_size; 129 __u32 efi_systab_hi; 130 __u32 efi_memmap_hi; 131 }; 132 133 /* 134 * This is the maximum number of entries in struct boot_params::e820_table 135 * (the zeropage), which is part of the x86 boot protocol ABI: 136 */ 137 #define E820_MAX_ENTRIES_ZEROPAGE 128 138 139 /* 140 * The E820 memory region entry of the boot protocol ABI: 141 */ 142 struct boot_e820_entry { 143 __u64 addr; 144 __u64 size; 145 __u32 type; 146 } __attribute__((packed)); 147 148 /* 149 * Smallest compatible version of jailhouse_setup_data required by this kernel. 150 */ 151 #define JAILHOUSE_SETUP_REQUIRED_VERSION 1 152 153 /* 154 * The boot loader is passing platform information via this Jailhouse-specific 155 * setup data structure. 156 */ 157 struct jailhouse_setup_data { 158 struct { 159 __u16 version; 160 __u16 compatible_version; 161 } __attribute__((packed)) hdr; 162 struct { 163 __u16 pm_timer_address; 164 __u16 num_cpus; 165 __u64 pci_mmconfig_base; 166 __u32 tsc_khz; 167 __u32 apic_khz; 168 __u8 standard_ioapic; 169 __u8 cpu_ids[255]; 170 } __attribute__((packed)) v1; 171 struct { 172 __u32 flags; 173 } __attribute__((packed)) v2; 174 } __attribute__((packed)); 175 176 /* 177 * IMA buffer setup data information from the previous kernel during kexec 178 */ 179 struct ima_setup_data { 180 __u64 addr; 181 __u64 size; 182 } __attribute__((packed)); 183 184 /* The so-called "zeropage" */ 185 struct boot_params { 186 struct screen_info screen_info; /* 0x000 */ 187 struct apm_bios_info apm_bios_info; /* 0x040 */ 188 __u8 _pad2[4]; /* 0x054 */ 189 __u64 tboot_addr; /* 0x058 */ 190 struct ist_info ist_info; /* 0x060 */ 191 __u64 acpi_rsdp_addr; /* 0x070 */ 192 __u8 _pad3[8]; /* 0x078 */ 193 __u8 hd0_info[16]; /* obsolete! */ /* 0x080 */ 194 __u8 hd1_info[16]; /* obsolete! */ /* 0x090 */ 195 struct sys_desc_table sys_desc_table; /* obsolete! */ /* 0x0a0 */ 196 struct olpc_ofw_header olpc_ofw_header; /* 0x0b0 */ 197 __u32 ext_ramdisk_image; /* 0x0c0 */ 198 __u32 ext_ramdisk_size; /* 0x0c4 */ 199 __u32 ext_cmd_line_ptr; /* 0x0c8 */ 200 __u8 _pad4[112]; /* 0x0cc */ 201 __u32 cc_blob_address; /* 0x13c */ 202 struct edid_info edid_info; /* 0x140 */ 203 struct efi_info efi_info; /* 0x1c0 */ 204 __u32 alt_mem_k; /* 0x1e0 */ 205 __u32 scratch; /* Scratch field! */ /* 0x1e4 */ 206 __u8 e820_entries; /* 0x1e8 */ 207 __u8 eddbuf_entries; /* 0x1e9 */ 208 __u8 edd_mbr_sig_buf_entries; /* 0x1ea */ 209 __u8 kbd_status; /* 0x1eb */ 210 __u8 secure_boot; /* 0x1ec */ 211 __u8 _pad5[2]; /* 0x1ed */ 212 /* 213 * The sentinel is set to a nonzero value (0xff) in header.S. 214 * 215 * A bootloader is supposed to only take setup_header and put 216 * it into a clean boot_params buffer. If it turns out that 217 * it is clumsy or too generous with the buffer, it most 218 * probably will pick up the sentinel variable too. The fact 219 * that this variable then is still 0xff will let kernel 220 * know that some variables in boot_params are invalid and 221 * kernel should zero out certain portions of boot_params. 222 */ 223 __u8 sentinel; /* 0x1ef */ 224 __u8 _pad6[1]; /* 0x1f0 */ 225 struct setup_header hdr; /* setup header */ /* 0x1f1 */ 226 __u8 _pad7[0x290-0x1f1-sizeof(struct setup_header)]; 227 __u32 edd_mbr_sig_buffer[EDD_MBR_SIG_MAX]; /* 0x290 */ 228 struct boot_e820_entry e820_table[E820_MAX_ENTRIES_ZEROPAGE]; /* 0x2d0 */ 229 __u8 _pad8[48]; /* 0xcd0 */ 230 struct edd_info eddbuf[EDDMAXNR]; /* 0xd00 */ 231 __u8 _pad9[276]; /* 0xeec */ 232 } __attribute__((packed)); 233 234 /** 235 * enum x86_hardware_subarch - x86 hardware subarchitecture 236 * 237 * The x86 hardware_subarch and hardware_subarch_data were added as of the x86 238 * boot protocol 2.07 to help distinguish and support custom x86 boot 239 * sequences. This enum represents accepted values for the x86 240 * hardware_subarch. Custom x86 boot sequences (not X86_SUBARCH_PC) do not 241 * have or simply *cannot* make use of natural stubs like BIOS or EFI, the 242 * hardware_subarch can be used on the Linux entry path to revector to a 243 * subarchitecture stub when needed. This subarchitecture stub can be used to 244 * set up Linux boot parameters or for special care to account for nonstandard 245 * handling of page tables. 246 * 247 * These enums should only ever be used by x86 code, and the code that uses 248 * it should be well contained and compartmentalized. 249 * 250 * KVM and Xen HVM do not have a subarch as these are expected to follow 251 * standard x86 boot entries. If there is a genuine need for "hypervisor" type 252 * that should be considered separately in the future. Future guest types 253 * should seriously consider working with standard x86 boot stubs such as 254 * the BIOS or EFI boot stubs. 255 * 256 * WARNING: this enum is only used for legacy hacks, for platform features that 257 * are not easily enumerated or discoverable. You should not ever use 258 * this for new features. 259 * 260 * @X86_SUBARCH_PC: Should be used if the hardware is enumerable using standard 261 * PC mechanisms (PCI, ACPI) and doesn't need a special boot flow. 262 * @X86_SUBARCH_LGUEST: Used for x86 hypervisor demo, lguest, deprecated 263 * @X86_SUBARCH_XEN: Used for Xen guest types which follow the PV boot path, 264 * which start at asm startup_xen() entry point and later jump to the C 265 * xen_start_kernel() entry point. Both domU and dom0 type of guests are 266 * currently supported through this PV boot path. 267 * @X86_SUBARCH_INTEL_MID: Used for Intel MID (Mobile Internet Device) platform 268 * systems which do not have the PCI legacy interfaces. 269 * @X86_SUBARCH_CE4100: Used for Intel CE media processor (CE4100) SoC 270 * for settop boxes and media devices, the use of a subarch for CE4100 271 * is more of a hack... 272 */ 273 enum x86_hardware_subarch { 274 X86_SUBARCH_PC = 0, 275 X86_SUBARCH_LGUEST, 276 X86_SUBARCH_XEN, 277 X86_SUBARCH_INTEL_MID, 278 X86_SUBARCH_CE4100, 279 X86_NR_SUBARCHS, 280 }; 281 282 #endif /* __ASSEMBLY__ */ 283 284 #endif /* _ASM_X86_BOOTPARAM_H */ 285