xref: /openbmc/linux/arch/x86/include/asm/x86_init.h (revision 9134211f)
1 /* SPDX-License-Identifier: GPL-2.0 */
2 #ifndef _ASM_X86_PLATFORM_H
3 #define _ASM_X86_PLATFORM_H
4 
5 #include <asm/bootparam.h>
6 
7 struct ghcb;
8 struct mpc_bus;
9 struct mpc_cpu;
10 struct pt_regs;
11 struct mpc_table;
12 struct cpuinfo_x86;
13 struct irq_domain;
14 
15 /**
16  * struct x86_init_mpparse - platform specific mpparse ops
17  * @setup_ioapic_ids:		platform specific ioapic id override
18  * @find_smp_config:		find the smp configuration
19  * @get_smp_config:		get the smp configuration
20  */
21 struct x86_init_mpparse {
22 	void (*setup_ioapic_ids)(void);
23 	void (*find_smp_config)(void);
24 	void (*get_smp_config)(unsigned int early);
25 };
26 
27 /**
28  * struct x86_init_resources - platform specific resource related ops
29  * @probe_roms:			probe BIOS roms
30  * @reserve_resources:		reserve the standard resources for the
31  *				platform
32  * @memory_setup:		platform specific memory setup
33  *
34  */
35 struct x86_init_resources {
36 	void (*probe_roms)(void);
37 	void (*reserve_resources)(void);
38 	char *(*memory_setup)(void);
39 };
40 
41 /**
42  * struct x86_init_irqs - platform specific interrupt setup
43  * @pre_vector_init:		init code to run before interrupt vectors
44  *				are set up.
45  * @intr_init:			interrupt init code
46  * @intr_mode_select:		interrupt delivery mode selection
47  * @intr_mode_init:		interrupt delivery mode setup
48  * @create_pci_msi_domain:	Create the PCI/MSI interrupt domain
49  */
50 struct x86_init_irqs {
51 	void (*pre_vector_init)(void);
52 	void (*intr_init)(void);
53 	void (*intr_mode_select)(void);
54 	void (*intr_mode_init)(void);
55 	struct irq_domain *(*create_pci_msi_domain)(void);
56 };
57 
58 /**
59  * struct x86_init_oem - oem platform specific customizing functions
60  * @arch_setup:			platform specific architecture setup
61  * @banner:			print a platform specific banner
62  */
63 struct x86_init_oem {
64 	void (*arch_setup)(void);
65 	void (*banner)(void);
66 };
67 
68 /**
69  * struct x86_init_paging - platform specific paging functions
70  * @pagetable_init:	platform specific paging initialization call to setup
71  *			the kernel pagetables and prepare accessors functions.
72  *			Callback must call paging_init(). Called once after the
73  *			direct mapping for phys memory is available.
74  */
75 struct x86_init_paging {
76 	void (*pagetable_init)(void);
77 };
78 
79 /**
80  * struct x86_init_timers - platform specific timer setup
81  * @setup_perpcu_clockev:	set up the per cpu clock event device for the
82  *				boot cpu
83  * @timer_init:			initialize the platform timer (default PIT/HPET)
84  * @wallclock_init:		init the wallclock device
85  */
86 struct x86_init_timers {
87 	void (*setup_percpu_clockev)(void);
88 	void (*timer_init)(void);
89 	void (*wallclock_init)(void);
90 };
91 
92 /**
93  * struct x86_init_iommu - platform specific iommu setup
94  * @iommu_init:			platform specific iommu setup
95  */
96 struct x86_init_iommu {
97 	int (*iommu_init)(void);
98 };
99 
100 /**
101  * struct x86_init_pci - platform specific pci init functions
102  * @arch_init:			platform specific pci arch init call
103  * @init:			platform specific pci subsystem init
104  * @init_irq:			platform specific pci irq init
105  * @fixup_irqs:			platform specific pci irq fixup
106  */
107 struct x86_init_pci {
108 	int (*arch_init)(void);
109 	int (*init)(void);
110 	void (*init_irq)(void);
111 	void (*fixup_irqs)(void);
112 };
113 
114 /**
115  * struct x86_hyper_init - x86 hypervisor init functions
116  * @init_platform:		platform setup
117  * @guest_late_init:		guest late init
118  * @x2apic_available:		X2APIC detection
119  * @msi_ext_dest_id:		MSI supports 15-bit APIC IDs
120  * @init_mem_mapping:		setup early mappings during init_mem_mapping()
121  * @init_after_bootmem:		guest init after boot allocator is finished
122  */
123 struct x86_hyper_init {
124 	void (*init_platform)(void);
125 	void (*guest_late_init)(void);
126 	bool (*x2apic_available)(void);
127 	bool (*msi_ext_dest_id)(void);
128 	void (*init_mem_mapping)(void);
129 	void (*init_after_bootmem)(void);
130 };
131 
132 /**
133  * struct x86_init_acpi - x86 ACPI init functions
134  * @set_root_poitner:		set RSDP address
135  * @get_root_pointer:		get RSDP address
136  * @reduced_hw_early_init:	hardware reduced platform early init
137  */
138 struct x86_init_acpi {
139 	void (*set_root_pointer)(u64 addr);
140 	u64 (*get_root_pointer)(void);
141 	void (*reduced_hw_early_init)(void);
142 };
143 
144 /**
145  * struct x86_guest - Functions used by misc guest incarnations like SEV, TDX, etc.
146  *
147  * @enc_status_change_prepare	Notify HV before the encryption status of a range is changed
148  * @enc_status_change_finish	Notify HV after the encryption status of a range is changed
149  * @enc_tlb_flush_required	Returns true if a TLB flush is needed before changing page encryption status
150  * @enc_cache_flush_required	Returns true if a cache flush is needed before changing page encryption status
151  */
152 struct x86_guest {
153 	bool (*enc_status_change_prepare)(unsigned long vaddr, int npages, bool enc);
154 	bool (*enc_status_change_finish)(unsigned long vaddr, int npages, bool enc);
155 	bool (*enc_tlb_flush_required)(bool enc);
156 	bool (*enc_cache_flush_required)(void);
157 };
158 
159 /**
160  * struct x86_init_ops - functions for platform specific setup
161  *
162  */
163 struct x86_init_ops {
164 	struct x86_init_resources	resources;
165 	struct x86_init_mpparse		mpparse;
166 	struct x86_init_irqs		irqs;
167 	struct x86_init_oem		oem;
168 	struct x86_init_paging		paging;
169 	struct x86_init_timers		timers;
170 	struct x86_init_iommu		iommu;
171 	struct x86_init_pci		pci;
172 	struct x86_hyper_init		hyper;
173 	struct x86_init_acpi		acpi;
174 };
175 
176 /**
177  * struct x86_cpuinit_ops - platform specific cpu hotplug setups
178  * @setup_percpu_clockev:	set up the per cpu clock event device
179  * @early_percpu_clock_init:	early init of the per cpu clock event device
180  * @fixup_cpu_id:		fixup function for cpuinfo_x86::phys_proc_id
181  * @parallel_bringup:		Parallel bringup control
182  */
183 struct x86_cpuinit_ops {
184 	void (*setup_percpu_clockev)(void);
185 	void (*early_percpu_clock_init)(void);
186 	void (*fixup_cpu_id)(struct cpuinfo_x86 *c, int node);
187 	bool parallel_bringup;
188 };
189 
190 struct timespec64;
191 
192 /**
193  * struct x86_legacy_devices - legacy x86 devices
194  *
195  * @pnpbios: this platform can have a PNPBIOS. If this is disabled the platform
196  * 	is known to never have a PNPBIOS.
197  *
198  * These are devices known to require LPC or ISA bus. The definition of legacy
199  * devices adheres to the ACPI 5.2.9.3 IA-PC Boot Architecture flag
200  * ACPI_FADT_LEGACY_DEVICES. These devices consist of user visible devices on
201  * the LPC or ISA bus. User visible devices are devices that have end-user
202  * accessible connectors (for example, LPT parallel port). Legacy devices on
203  * the LPC bus consist for example of serial and parallel ports, PS/2 keyboard
204  * / mouse, and the floppy disk controller. A system that lacks all known
205  * legacy devices can assume all devices can be detected exclusively via
206  * standard device enumeration mechanisms including the ACPI namespace.
207  *
208  * A system which has does not have ACPI_FADT_LEGACY_DEVICES enabled must not
209  * have any of the legacy devices enumerated below present.
210  */
211 struct x86_legacy_devices {
212 	int pnpbios;
213 };
214 
215 /**
216  * enum x86_legacy_i8042_state - i8042 keyboard controller state
217  * @X86_LEGACY_I8042_PLATFORM_ABSENT: the controller is always absent on
218  *	given platform/subarch.
219  * @X86_LEGACY_I8042_FIRMWARE_ABSENT: firmware reports that the controller
220  *	is absent.
221  * @X86_LEGACY_i8042_EXPECTED_PRESENT: the controller is likely to be
222  *	present, the i8042 driver should probe for controller existence.
223  */
224 enum x86_legacy_i8042_state {
225 	X86_LEGACY_I8042_PLATFORM_ABSENT,
226 	X86_LEGACY_I8042_FIRMWARE_ABSENT,
227 	X86_LEGACY_I8042_EXPECTED_PRESENT,
228 };
229 
230 /**
231  * struct x86_legacy_features - legacy x86 features
232  *
233  * @i8042: indicated if we expect the device to have i8042 controller
234  *	present.
235  * @rtc: this device has a CMOS real-time clock present
236  * @reserve_bios_regions: boot code will search for the EBDA address and the
237  * 	start of the 640k - 1M BIOS region.  If false, the platform must
238  * 	ensure that its memory map correctly reserves sub-1MB regions as needed.
239  * @devices: legacy x86 devices, refer to struct x86_legacy_devices
240  * 	documentation for further details.
241  */
242 struct x86_legacy_features {
243 	enum x86_legacy_i8042_state i8042;
244 	int rtc;
245 	int warm_reset;
246 	int no_vga;
247 	int reserve_bios_regions;
248 	struct x86_legacy_devices devices;
249 };
250 
251 /**
252  * struct x86_hyper_runtime - x86 hypervisor specific runtime callbacks
253  *
254  * @pin_vcpu:			pin current vcpu to specified physical
255  *				cpu (run rarely)
256  * @sev_es_hcall_prepare:	Load additional hypervisor-specific
257  *				state into the GHCB when doing a VMMCALL under
258  *				SEV-ES. Called from the #VC exception handler.
259  * @sev_es_hcall_finish:	Copies state from the GHCB back into the
260  *				processor (or pt_regs). Also runs checks on the
261  *				state returned from the hypervisor after a
262  *				VMMCALL under SEV-ES.  Needs to return 'false'
263  *				if the checks fail.  Called from the #VC
264  *				exception handler.
265  * @is_private_mmio:		For CoCo VMs, must map MMIO address as private.
266  *				Used when device is emulated by a paravisor
267  *				layer in the VM context.
268  */
269 struct x86_hyper_runtime {
270 	void (*pin_vcpu)(int cpu);
271 	void (*sev_es_hcall_prepare)(struct ghcb *ghcb, struct pt_regs *regs);
272 	bool (*sev_es_hcall_finish)(struct ghcb *ghcb, struct pt_regs *regs);
273 	bool (*is_private_mmio)(u64 addr);
274 };
275 
276 /**
277  * struct x86_platform_ops - platform specific runtime functions
278  * @calibrate_cpu:		calibrate CPU
279  * @calibrate_tsc:		calibrate TSC, if different from CPU
280  * @get_wallclock:		get time from HW clock like RTC etc.
281  * @set_wallclock:		set time back to HW clock
282  * @is_untracked_pat_range	exclude from PAT logic
283  * @nmi_init			enable NMI on cpus
284  * @save_sched_clock_state:	save state for sched_clock() on suspend
285  * @restore_sched_clock_state:	restore state for sched_clock() on resume
286  * @apic_post_init:		adjust apic if needed
287  * @legacy:			legacy features
288  * @set_legacy_features:	override legacy features. Use of this callback
289  * 				is highly discouraged. You should only need
290  * 				this if your hardware platform requires further
291  * 				custom fine tuning far beyond what may be
292  * 				possible in x86_early_init_platform_quirks() by
293  * 				only using the current x86_hardware_subarch
294  * 				semantics.
295  * @realmode_reserve:		reserve memory for realmode trampoline
296  * @realmode_init:		initialize realmode trampoline
297  * @hyper:			x86 hypervisor specific runtime callbacks
298  */
299 struct x86_platform_ops {
300 	unsigned long (*calibrate_cpu)(void);
301 	unsigned long (*calibrate_tsc)(void);
302 	void (*get_wallclock)(struct timespec64 *ts);
303 	int (*set_wallclock)(const struct timespec64 *ts);
304 	void (*iommu_shutdown)(void);
305 	bool (*is_untracked_pat_range)(u64 start, u64 end);
306 	void (*nmi_init)(void);
307 	unsigned char (*get_nmi_reason)(void);
308 	void (*save_sched_clock_state)(void);
309 	void (*restore_sched_clock_state)(void);
310 	void (*apic_post_init)(void);
311 	struct x86_legacy_features legacy;
312 	void (*set_legacy_features)(void);
313 	void (*realmode_reserve)(void);
314 	void (*realmode_init)(void);
315 	struct x86_hyper_runtime hyper;
316 	struct x86_guest guest;
317 };
318 
319 struct x86_apic_ops {
320 	unsigned int	(*io_apic_read)   (unsigned int apic, unsigned int reg);
321 	void		(*restore)(void);
322 };
323 
324 extern struct x86_init_ops x86_init;
325 extern struct x86_cpuinit_ops x86_cpuinit;
326 extern struct x86_platform_ops x86_platform;
327 extern struct x86_msi_ops x86_msi;
328 extern struct x86_apic_ops x86_apic_ops;
329 
330 extern void x86_early_init_platform_quirks(void);
331 extern void x86_init_noop(void);
332 extern void x86_init_uint_noop(unsigned int unused);
333 extern bool bool_x86_init_noop(void);
334 extern void x86_op_int_noop(int cpu);
335 extern bool x86_pnpbios_disabled(void);
336 extern int set_rtc_noop(const struct timespec64 *now);
337 extern void get_rtc_noop(struct timespec64 *now);
338 
339 #endif
340