1 /* SPDX-License-Identifier: GPL-2.0 */ 2 #ifndef _ASM_X86_PLATFORM_H 3 #define _ASM_X86_PLATFORM_H 4 5 #include <asm/bootparam.h> 6 7 struct mpc_bus; 8 struct mpc_cpu; 9 struct mpc_table; 10 struct cpuinfo_x86; 11 12 /** 13 * struct x86_init_mpparse - platform specific mpparse ops 14 * @mpc_record: platform specific mpc record accounting 15 * @setup_ioapic_ids: platform specific ioapic id override 16 * @mpc_apic_id: platform specific mpc apic id assignment 17 * @smp_read_mpc_oem: platform specific oem mpc table setup 18 * @mpc_oem_pci_bus: platform specific pci bus setup (default NULL) 19 * @mpc_oem_bus_info: platform specific mpc bus info 20 * @find_smp_config: find the smp configuration 21 * @get_smp_config: get the smp configuration 22 */ 23 struct x86_init_mpparse { 24 void (*mpc_record)(unsigned int mode); 25 void (*setup_ioapic_ids)(void); 26 int (*mpc_apic_id)(struct mpc_cpu *m); 27 void (*smp_read_mpc_oem)(struct mpc_table *mpc); 28 void (*mpc_oem_pci_bus)(struct mpc_bus *m); 29 void (*mpc_oem_bus_info)(struct mpc_bus *m, char *name); 30 void (*find_smp_config)(void); 31 void (*get_smp_config)(unsigned int early); 32 }; 33 34 /** 35 * struct x86_init_resources - platform specific resource related ops 36 * @probe_roms: probe BIOS roms 37 * @reserve_resources: reserve the standard resources for the 38 * platform 39 * @memory_setup: platform specific memory setup 40 * 41 */ 42 struct x86_init_resources { 43 void (*probe_roms)(void); 44 void (*reserve_resources)(void); 45 char *(*memory_setup)(void); 46 }; 47 48 /** 49 * struct x86_init_irqs - platform specific interrupt setup 50 * @pre_vector_init: init code to run before interrupt vectors 51 * are set up. 52 * @intr_init: interrupt init code 53 * @trap_init: platform specific trap setup 54 * @intr_mode_init: interrupt delivery mode setup 55 */ 56 struct x86_init_irqs { 57 void (*pre_vector_init)(void); 58 void (*intr_init)(void); 59 void (*trap_init)(void); 60 void (*intr_mode_init)(void); 61 }; 62 63 /** 64 * struct x86_init_oem - oem platform specific customizing functions 65 * @arch_setup: platform specific architecture setup 66 * @banner: print a platform specific banner 67 */ 68 struct x86_init_oem { 69 void (*arch_setup)(void); 70 void (*banner)(void); 71 }; 72 73 /** 74 * struct x86_init_paging - platform specific paging functions 75 * @pagetable_init: platform specific paging initialization call to setup 76 * the kernel pagetables and prepare accessors functions. 77 * Callback must call paging_init(). Called once after the 78 * direct mapping for phys memory is available. 79 */ 80 struct x86_init_paging { 81 void (*pagetable_init)(void); 82 }; 83 84 /** 85 * struct x86_init_timers - platform specific timer setup 86 * @setup_perpcu_clockev: set up the per cpu clock event device for the 87 * boot cpu 88 * @timer_init: initialize the platform timer (default PIT/HPET) 89 * @wallclock_init: init the wallclock device 90 */ 91 struct x86_init_timers { 92 void (*setup_percpu_clockev)(void); 93 void (*timer_init)(void); 94 void (*wallclock_init)(void); 95 }; 96 97 /** 98 * struct x86_init_iommu - platform specific iommu setup 99 * @iommu_init: platform specific iommu setup 100 */ 101 struct x86_init_iommu { 102 int (*iommu_init)(void); 103 }; 104 105 /** 106 * struct x86_init_pci - platform specific pci init functions 107 * @arch_init: platform specific pci arch init call 108 * @init: platform specific pci subsystem init 109 * @init_irq: platform specific pci irq init 110 * @fixup_irqs: platform specific pci irq fixup 111 */ 112 struct x86_init_pci { 113 int (*arch_init)(void); 114 int (*init)(void); 115 void (*init_irq)(void); 116 void (*fixup_irqs)(void); 117 }; 118 119 /** 120 * struct x86_hyper_init - x86 hypervisor init functions 121 * @init_platform: platform setup 122 * @guest_late_init: guest late init 123 * @x2apic_available: X2APIC detection 124 * @init_mem_mapping: setup early mappings during init_mem_mapping() 125 */ 126 struct x86_hyper_init { 127 void (*init_platform)(void); 128 void (*guest_late_init)(void); 129 bool (*x2apic_available)(void); 130 void (*init_mem_mapping)(void); 131 }; 132 133 /** 134 * struct x86_init_ops - functions for platform specific setup 135 * 136 */ 137 struct x86_init_ops { 138 struct x86_init_resources resources; 139 struct x86_init_mpparse mpparse; 140 struct x86_init_irqs irqs; 141 struct x86_init_oem oem; 142 struct x86_init_paging paging; 143 struct x86_init_timers timers; 144 struct x86_init_iommu iommu; 145 struct x86_init_pci pci; 146 struct x86_hyper_init hyper; 147 }; 148 149 /** 150 * struct x86_cpuinit_ops - platform specific cpu hotplug setups 151 * @setup_percpu_clockev: set up the per cpu clock event device 152 * @early_percpu_clock_init: early init of the per cpu clock event device 153 */ 154 struct x86_cpuinit_ops { 155 void (*setup_percpu_clockev)(void); 156 void (*early_percpu_clock_init)(void); 157 void (*fixup_cpu_id)(struct cpuinfo_x86 *c, int node); 158 }; 159 160 struct timespec; 161 162 /** 163 * struct x86_legacy_devices - legacy x86 devices 164 * 165 * @pnpbios: this platform can have a PNPBIOS. If this is disabled the platform 166 * is known to never have a PNPBIOS. 167 * 168 * These are devices known to require LPC or ISA bus. The definition of legacy 169 * devices adheres to the ACPI 5.2.9.3 IA-PC Boot Architecture flag 170 * ACPI_FADT_LEGACY_DEVICES. These devices consist of user visible devices on 171 * the LPC or ISA bus. User visible devices are devices that have end-user 172 * accessible connectors (for example, LPT parallel port). Legacy devices on 173 * the LPC bus consist for example of serial and parallel ports, PS/2 keyboard 174 * / mouse, and the floppy disk controller. A system that lacks all known 175 * legacy devices can assume all devices can be detected exclusively via 176 * standard device enumeration mechanisms including the ACPI namespace. 177 * 178 * A system which has does not have ACPI_FADT_LEGACY_DEVICES enabled must not 179 * have any of the legacy devices enumerated below present. 180 */ 181 struct x86_legacy_devices { 182 int pnpbios; 183 }; 184 185 /** 186 * enum x86_legacy_i8042_state - i8042 keyboard controller state 187 * @X86_LEGACY_I8042_PLATFORM_ABSENT: the controller is always absent on 188 * given platform/subarch. 189 * @X86_LEGACY_I8042_FIRMWARE_ABSENT: firmware reports that the controller 190 * is absent. 191 * @X86_LEGACY_i8042_EXPECTED_PRESENT: the controller is likely to be 192 * present, the i8042 driver should probe for controller existence. 193 */ 194 enum x86_legacy_i8042_state { 195 X86_LEGACY_I8042_PLATFORM_ABSENT, 196 X86_LEGACY_I8042_FIRMWARE_ABSENT, 197 X86_LEGACY_I8042_EXPECTED_PRESENT, 198 }; 199 200 /** 201 * struct x86_legacy_features - legacy x86 features 202 * 203 * @i8042: indicated if we expect the device to have i8042 controller 204 * present. 205 * @rtc: this device has a CMOS real-time clock present 206 * @reserve_bios_regions: boot code will search for the EBDA address and the 207 * start of the 640k - 1M BIOS region. If false, the platform must 208 * ensure that its memory map correctly reserves sub-1MB regions as needed. 209 * @devices: legacy x86 devices, refer to struct x86_legacy_devices 210 * documentation for further details. 211 */ 212 struct x86_legacy_features { 213 enum x86_legacy_i8042_state i8042; 214 int rtc; 215 int warm_reset; 216 int no_vga; 217 int reserve_bios_regions; 218 struct x86_legacy_devices devices; 219 }; 220 221 /** 222 * struct x86_hyper_runtime - x86 hypervisor specific runtime callbacks 223 * 224 * @pin_vcpu: pin current vcpu to specified physical cpu (run rarely) 225 */ 226 struct x86_hyper_runtime { 227 void (*pin_vcpu)(int cpu); 228 }; 229 230 /** 231 * struct x86_platform_ops - platform specific runtime functions 232 * @calibrate_cpu: calibrate CPU 233 * @calibrate_tsc: calibrate TSC, if different from CPU 234 * @get_wallclock: get time from HW clock like RTC etc. 235 * @set_wallclock: set time back to HW clock 236 * @is_untracked_pat_range exclude from PAT logic 237 * @nmi_init enable NMI on cpus 238 * @save_sched_clock_state: save state for sched_clock() on suspend 239 * @restore_sched_clock_state: restore state for sched_clock() on resume 240 * @apic_post_init: adjust apic if needed 241 * @legacy: legacy features 242 * @set_legacy_features: override legacy features. Use of this callback 243 * is highly discouraged. You should only need 244 * this if your hardware platform requires further 245 * custom fine tuning far beyond what may be 246 * possible in x86_early_init_platform_quirks() by 247 * only using the current x86_hardware_subarch 248 * semantics. 249 * @hyper: x86 hypervisor specific runtime callbacks 250 */ 251 struct x86_platform_ops { 252 unsigned long (*calibrate_cpu)(void); 253 unsigned long (*calibrate_tsc)(void); 254 void (*get_wallclock)(struct timespec *ts); 255 int (*set_wallclock)(const struct timespec *ts); 256 void (*iommu_shutdown)(void); 257 bool (*is_untracked_pat_range)(u64 start, u64 end); 258 void (*nmi_init)(void); 259 unsigned char (*get_nmi_reason)(void); 260 void (*save_sched_clock_state)(void); 261 void (*restore_sched_clock_state)(void); 262 void (*apic_post_init)(void); 263 struct x86_legacy_features legacy; 264 void (*set_legacy_features)(void); 265 struct x86_hyper_runtime hyper; 266 }; 267 268 struct pci_dev; 269 270 struct x86_msi_ops { 271 int (*setup_msi_irqs)(struct pci_dev *dev, int nvec, int type); 272 void (*teardown_msi_irq)(unsigned int irq); 273 void (*teardown_msi_irqs)(struct pci_dev *dev); 274 void (*restore_msi_irqs)(struct pci_dev *dev); 275 }; 276 277 struct x86_io_apic_ops { 278 unsigned int (*read) (unsigned int apic, unsigned int reg); 279 void (*disable)(void); 280 }; 281 282 extern struct x86_init_ops x86_init; 283 extern struct x86_cpuinit_ops x86_cpuinit; 284 extern struct x86_platform_ops x86_platform; 285 extern struct x86_msi_ops x86_msi; 286 extern struct x86_io_apic_ops x86_io_apic_ops; 287 288 extern void x86_early_init_platform_quirks(void); 289 extern void x86_init_noop(void); 290 extern void x86_init_uint_noop(unsigned int unused); 291 292 #endif 293