xref: /openbmc/linux/arch/x86/include/asm/switch_to.h (revision ca55b2fe)
1 #ifndef _ASM_X86_SWITCH_TO_H
2 #define _ASM_X86_SWITCH_TO_H
3 
4 struct task_struct; /* one of the stranger aspects of C forward declarations */
5 __visible struct task_struct *__switch_to(struct task_struct *prev,
6 					   struct task_struct *next);
7 struct tss_struct;
8 void __switch_to_xtra(struct task_struct *prev_p, struct task_struct *next_p,
9 		      struct tss_struct *tss);
10 
11 #ifdef CONFIG_X86_32
12 
13 #ifdef CONFIG_CC_STACKPROTECTOR
14 #define __switch_canary							\
15 	"movl %P[task_canary](%[next]), %%ebx\n\t"			\
16 	"movl %%ebx, "__percpu_arg([stack_canary])"\n\t"
17 #define __switch_canary_oparam						\
18 	, [stack_canary] "=m" (stack_canary.canary)
19 #define __switch_canary_iparam						\
20 	, [task_canary] "i" (offsetof(struct task_struct, stack_canary))
21 #else	/* CC_STACKPROTECTOR */
22 #define __switch_canary
23 #define __switch_canary_oparam
24 #define __switch_canary_iparam
25 #endif	/* CC_STACKPROTECTOR */
26 
27 /*
28  * Saving eflags is important. It switches not only IOPL between tasks,
29  * it also protects other tasks from NT leaking through sysenter etc.
30  */
31 #define switch_to(prev, next, last)					\
32 do {									\
33 	/*								\
34 	 * Context-switching clobbers all registers, so we clobber	\
35 	 * them explicitly, via unused output variables.		\
36 	 * (EAX and EBP is not listed because EBP is saved/restored	\
37 	 * explicitly for wchan access and EAX is the return value of	\
38 	 * __switch_to())						\
39 	 */								\
40 	unsigned long ebx, ecx, edx, esi, edi;				\
41 									\
42 	asm volatile("pushfl\n\t"		/* save    flags */	\
43 		     "pushl %%ebp\n\t"		/* save    EBP   */	\
44 		     "movl %%esp,%[prev_sp]\n\t"	/* save    ESP   */ \
45 		     "movl %[next_sp],%%esp\n\t"	/* restore ESP   */ \
46 		     "movl $1f,%[prev_ip]\n\t"	/* save    EIP   */	\
47 		     "pushl %[next_ip]\n\t"	/* restore EIP   */	\
48 		     __switch_canary					\
49 		     "jmp __switch_to\n"	/* regparm call  */	\
50 		     "1:\t"						\
51 		     "popl %%ebp\n\t"		/* restore EBP   */	\
52 		     "popfl\n"			/* restore flags */	\
53 									\
54 		     /* output parameters */				\
55 		     : [prev_sp] "=m" (prev->thread.sp),		\
56 		       [prev_ip] "=m" (prev->thread.ip),		\
57 		       "=a" (last),					\
58 									\
59 		       /* clobbered output registers: */		\
60 		       "=b" (ebx), "=c" (ecx), "=d" (edx),		\
61 		       "=S" (esi), "=D" (edi)				\
62 		       							\
63 		       __switch_canary_oparam				\
64 									\
65 		       /* input parameters: */				\
66 		     : [next_sp]  "m" (next->thread.sp),		\
67 		       [next_ip]  "m" (next->thread.ip),		\
68 		       							\
69 		       /* regparm parameters for __switch_to(): */	\
70 		       [prev]     "a" (prev),				\
71 		       [next]     "d" (next)				\
72 									\
73 		       __switch_canary_iparam				\
74 									\
75 		     : /* reloaded segment registers */			\
76 			"memory");					\
77 } while (0)
78 
79 #else /* CONFIG_X86_32 */
80 
81 /* frame pointer must be last for get_wchan */
82 #define SAVE_CONTEXT    "pushf ; pushq %%rbp ; movq %%rsi,%%rbp\n\t"
83 #define RESTORE_CONTEXT "movq %%rbp,%%rsi ; popq %%rbp ; popf\t"
84 
85 #define __EXTRA_CLOBBER  \
86 	, "rcx", "rbx", "rdx", "r8", "r9", "r10", "r11", \
87 	  "r12", "r13", "r14", "r15"
88 
89 #ifdef CONFIG_CC_STACKPROTECTOR
90 #define __switch_canary							  \
91 	"movq %P[task_canary](%%rsi),%%r8\n\t"				  \
92 	"movq %%r8,"__percpu_arg([gs_canary])"\n\t"
93 #define __switch_canary_oparam						  \
94 	, [gs_canary] "=m" (irq_stack_union.stack_canary)
95 #define __switch_canary_iparam						  \
96 	, [task_canary] "i" (offsetof(struct task_struct, stack_canary))
97 #else	/* CC_STACKPROTECTOR */
98 #define __switch_canary
99 #define __switch_canary_oparam
100 #define __switch_canary_iparam
101 #endif	/* CC_STACKPROTECTOR */
102 
103 /* Save restore flags to clear handle leaking NT */
104 #define switch_to(prev, next, last) \
105 	asm volatile(SAVE_CONTEXT					  \
106 	     "movq %%rsp,%P[threadrsp](%[prev])\n\t" /* save RSP */	  \
107 	     "movq %P[threadrsp](%[next]),%%rsp\n\t" /* restore RSP */	  \
108 	     "call __switch_to\n\t"					  \
109 	     "movq "__percpu_arg([current_task])",%%rsi\n\t"		  \
110 	     __switch_canary						  \
111 	     "movq %P[thread_info](%%rsi),%%r8\n\t"			  \
112 	     "movq %%rax,%%rdi\n\t" 					  \
113 	     "testl  %[_tif_fork],%P[ti_flags](%%r8)\n\t"		  \
114 	     "jnz   ret_from_fork\n\t"					  \
115 	     RESTORE_CONTEXT						  \
116 	     : "=a" (last)					  	  \
117 	       __switch_canary_oparam					  \
118 	     : [next] "S" (next), [prev] "D" (prev),			  \
119 	       [threadrsp] "i" (offsetof(struct task_struct, thread.sp)), \
120 	       [ti_flags] "i" (offsetof(struct thread_info, flags)),	  \
121 	       [_tif_fork] "i" (_TIF_FORK),			  	  \
122 	       [thread_info] "i" (offsetof(struct task_struct, stack)),   \
123 	       [current_task] "m" (current_task)			  \
124 	       __switch_canary_iparam					  \
125 	     : "memory", "cc" __EXTRA_CLOBBER)
126 
127 #endif /* CONFIG_X86_32 */
128 
129 #endif /* _ASM_X86_SWITCH_TO_H */
130