1 #ifndef _ASM_X86_PROCESSOR_FLAGS_H 2 #define _ASM_X86_PROCESSOR_FLAGS_H 3 4 #include <uapi/asm/processor-flags.h> 5 6 #ifdef CONFIG_VM86 7 #define X86_VM_MASK X86_EFLAGS_VM 8 #else 9 #define X86_VM_MASK 0 /* No VM86 support */ 10 #endif 11 12 /* 13 * CR3's layout varies depending on several things. 14 * 15 * If CR4.PCIDE is set (64-bit only), then CR3[11:0] is the address space ID. 16 * If PAE is enabled, then CR3[11:5] is part of the PDPT address 17 * (i.e. it's 32-byte aligned, not page-aligned) and CR3[4:0] is ignored. 18 * Otherwise (non-PAE, non-PCID), CR3[3] is PWT, CR3[4] is PCD, and 19 * CR3[2:0] and CR3[11:5] are ignored. 20 * 21 * In all cases, Linux puts zeros in the low ignored bits and in PWT and PCD. 22 * 23 * CR3[63] is always read as zero. If CR4.PCIDE is set, then CR3[63] may be 24 * written as 1 to prevent the write to CR3 from flushing the TLB. 25 * 26 * On systems with SME, one bit (in a variable position!) is stolen to indicate 27 * that the top-level paging structure is encrypted. 28 * 29 * All of the remaining bits indicate the physical address of the top-level 30 * paging structure. 31 * 32 * CR3_ADDR_MASK is the mask used by read_cr3_pa(). 33 */ 34 #ifdef CONFIG_X86_64 35 /* Mask off the address space ID bits. */ 36 #define CR3_ADDR_MASK 0x7FFFFFFFFFFFF000ull 37 #define CR3_PCID_MASK 0xFFFull 38 #else 39 /* 40 * CR3_ADDR_MASK needs at least bits 31:5 set on PAE systems, and we save 41 * a tiny bit of code size by setting all the bits. 42 */ 43 #define CR3_ADDR_MASK 0xFFFFFFFFull 44 #define CR3_PCID_MASK 0ull 45 #endif 46 47 #endif /* _ASM_X86_PROCESSOR_FLAGS_H */ 48