xref: /openbmc/linux/arch/x86/include/asm/pci_x86.h (revision 6d99a79c)
1 /* SPDX-License-Identifier: GPL-2.0 */
2 /*
3  *	Low-Level PCI Access for i386 machines.
4  *
5  *	(c) 1999 Martin Mares <mj@ucw.cz>
6  */
7 
8 #include <linux/ioport.h>
9 
10 #undef DEBUG
11 
12 #ifdef DEBUG
13 #define DBG(fmt, ...) printk(fmt, ##__VA_ARGS__)
14 #else
15 #define DBG(fmt, ...)				\
16 do {						\
17 	if (0)					\
18 		printk(fmt, ##__VA_ARGS__);	\
19 } while (0)
20 #endif
21 
22 #define PCI_PROBE_BIOS		0x0001
23 #define PCI_PROBE_CONF1		0x0002
24 #define PCI_PROBE_CONF2		0x0004
25 #define PCI_PROBE_MMCONF	0x0008
26 #define PCI_PROBE_MASK		0x000f
27 #define PCI_PROBE_NOEARLY	0x0010
28 
29 #define PCI_NO_CHECKS		0x0400
30 #define PCI_USE_PIRQ_MASK	0x0800
31 #define PCI_ASSIGN_ROMS		0x1000
32 #define PCI_BIOS_IRQ_SCAN	0x2000
33 #define PCI_ASSIGN_ALL_BUSSES	0x4000
34 #define PCI_CAN_SKIP_ISA_ALIGN	0x8000
35 #define PCI_USE__CRS		0x10000
36 #define PCI_CHECK_ENABLE_AMD_MMCONF	0x20000
37 #define PCI_HAS_IO_ECS		0x40000
38 #define PCI_NOASSIGN_ROMS	0x80000
39 #define PCI_ROOT_NO_CRS		0x100000
40 #define PCI_NOASSIGN_BARS	0x200000
41 #define PCI_BIG_ROOT_WINDOW	0x400000
42 
43 extern unsigned int pci_probe;
44 extern unsigned long pirq_table_addr;
45 
46 enum pci_bf_sort_state {
47 	pci_bf_sort_default,
48 	pci_force_nobf,
49 	pci_force_bf,
50 	pci_dmi_bf,
51 };
52 
53 /* pci-i386.c */
54 
55 void pcibios_resource_survey(void);
56 void pcibios_set_cache_line_size(void);
57 
58 /* pci-pc.c */
59 
60 extern int pcibios_last_bus;
61 extern struct pci_ops pci_root_ops;
62 
63 void pcibios_scan_specific_bus(int busn);
64 
65 /* pci-irq.c */
66 
67 struct irq_info {
68 	u8 bus, devfn;			/* Bus, device and function */
69 	struct {
70 		u8 link;		/* IRQ line ID, chipset dependent,
71 					   0 = not routed */
72 		u16 bitmap;		/* Available IRQs */
73 	} __attribute__((packed)) irq[4];
74 	u8 slot;			/* Slot number, 0=onboard */
75 	u8 rfu;
76 } __attribute__((packed));
77 
78 struct irq_routing_table {
79 	u32 signature;			/* PIRQ_SIGNATURE should be here */
80 	u16 version;			/* PIRQ_VERSION */
81 	u16 size;			/* Table size in bytes */
82 	u8 rtr_bus, rtr_devfn;		/* Where the interrupt router lies */
83 	u16 exclusive_irqs;		/* IRQs devoted exclusively to
84 					   PCI usage */
85 	u16 rtr_vendor, rtr_device;	/* Vendor and device ID of
86 					   interrupt router */
87 	u32 miniport_data;		/* Crap */
88 	u8 rfu[11];
89 	u8 checksum;			/* Modulo 256 checksum must give 0 */
90 	struct irq_info slots[0];
91 } __attribute__((packed));
92 
93 extern unsigned int pcibios_irq_mask;
94 
95 extern raw_spinlock_t pci_config_lock;
96 
97 extern int (*pcibios_enable_irq)(struct pci_dev *dev);
98 extern void (*pcibios_disable_irq)(struct pci_dev *dev);
99 
100 extern bool mp_should_keep_irq(struct device *dev);
101 
102 struct pci_raw_ops {
103 	int (*read)(unsigned int domain, unsigned int bus, unsigned int devfn,
104 						int reg, int len, u32 *val);
105 	int (*write)(unsigned int domain, unsigned int bus, unsigned int devfn,
106 						int reg, int len, u32 val);
107 };
108 
109 extern const struct pci_raw_ops *raw_pci_ops;
110 extern const struct pci_raw_ops *raw_pci_ext_ops;
111 
112 extern const struct pci_raw_ops pci_mmcfg;
113 extern const struct pci_raw_ops pci_direct_conf1;
114 extern bool port_cf9_safe;
115 
116 /* arch_initcall level */
117 extern int pci_direct_probe(void);
118 extern void pci_direct_init(int type);
119 extern void pci_pcbios_init(void);
120 extern void __init dmi_check_pciprobe(void);
121 extern void __init dmi_check_skip_isa_align(void);
122 
123 /* some common used subsys_initcalls */
124 extern int __init pci_acpi_init(void);
125 extern void __init pcibios_irq_init(void);
126 extern int __init pcibios_init(void);
127 extern int pci_legacy_init(void);
128 extern void pcibios_fixup_irqs(void);
129 
130 /* pci-mmconfig.c */
131 
132 /* "PCI MMCONFIG %04x [bus %02x-%02x]" */
133 #define PCI_MMCFG_RESOURCE_NAME_LEN (22 + 4 + 2 + 2)
134 
135 struct pci_mmcfg_region {
136 	struct list_head list;
137 	struct resource res;
138 	u64 address;
139 	char __iomem *virt;
140 	u16 segment;
141 	u8 start_bus;
142 	u8 end_bus;
143 	char name[PCI_MMCFG_RESOURCE_NAME_LEN];
144 };
145 
146 extern int __init pci_mmcfg_arch_init(void);
147 extern void __init pci_mmcfg_arch_free(void);
148 extern int pci_mmcfg_arch_map(struct pci_mmcfg_region *cfg);
149 extern void pci_mmcfg_arch_unmap(struct pci_mmcfg_region *cfg);
150 extern int pci_mmconfig_insert(struct device *dev, u16 seg, u8 start, u8 end,
151 			       phys_addr_t addr);
152 extern int pci_mmconfig_delete(u16 seg, u8 start, u8 end);
153 extern struct pci_mmcfg_region *pci_mmconfig_lookup(int segment, int bus);
154 extern struct pci_mmcfg_region *__init pci_mmconfig_add(int segment, int start,
155 							int end, u64 addr);
156 
157 extern struct list_head pci_mmcfg_list;
158 
159 #define PCI_MMCFG_BUS_OFFSET(bus)      ((bus) << 20)
160 
161 /*
162  * On AMD Fam10h CPUs, all PCI MMIO configuration space accesses must use
163  * %eax.  No other source or target registers may be used.  The following
164  * mmio_config_* accessors enforce this.  See "BIOS and Kernel Developer's
165  * Guide (BKDG) For AMD Family 10h Processors", rev. 3.48, sec 2.11.1,
166  * "MMIO Configuration Coding Requirements".
167  */
168 static inline unsigned char mmio_config_readb(void __iomem *pos)
169 {
170 	u8 val;
171 	asm volatile("movb (%1),%%al" : "=a" (val) : "r" (pos));
172 	return val;
173 }
174 
175 static inline unsigned short mmio_config_readw(void __iomem *pos)
176 {
177 	u16 val;
178 	asm volatile("movw (%1),%%ax" : "=a" (val) : "r" (pos));
179 	return val;
180 }
181 
182 static inline unsigned int mmio_config_readl(void __iomem *pos)
183 {
184 	u32 val;
185 	asm volatile("movl (%1),%%eax" : "=a" (val) : "r" (pos));
186 	return val;
187 }
188 
189 static inline void mmio_config_writeb(void __iomem *pos, u8 val)
190 {
191 	asm volatile("movb %%al,(%1)" : : "a" (val), "r" (pos) : "memory");
192 }
193 
194 static inline void mmio_config_writew(void __iomem *pos, u16 val)
195 {
196 	asm volatile("movw %%ax,(%1)" : : "a" (val), "r" (pos) : "memory");
197 }
198 
199 static inline void mmio_config_writel(void __iomem *pos, u32 val)
200 {
201 	asm volatile("movl %%eax,(%1)" : : "a" (val), "r" (pos) : "memory");
202 }
203 
204 #ifdef CONFIG_PCI
205 # ifdef CONFIG_ACPI
206 #  define x86_default_pci_init		pci_acpi_init
207 # else
208 #  define x86_default_pci_init		pci_legacy_init
209 # endif
210 # define x86_default_pci_init_irq	pcibios_irq_init
211 # define x86_default_pci_fixup_irqs	pcibios_fixup_irqs
212 #else
213 # define x86_default_pci_init		NULL
214 # define x86_default_pci_init_irq	NULL
215 # define x86_default_pci_fixup_irqs	NULL
216 #endif
217