1 #ifndef _ASM_X86_PARAVIRT_TYPES_H
2 #define _ASM_X86_PARAVIRT_TYPES_H
3 
4 /* Bitmask of what can be clobbered: usually at least eax. */
5 #define CLBR_NONE 0
6 #define CLBR_EAX  (1 << 0)
7 #define CLBR_ECX  (1 << 1)
8 #define CLBR_EDX  (1 << 2)
9 #define CLBR_EDI  (1 << 3)
10 
11 #ifdef CONFIG_X86_32
12 /* CLBR_ANY should match all regs platform has. For i386, that's just it */
13 #define CLBR_ANY  ((1 << 4) - 1)
14 
15 #define CLBR_ARG_REGS	(CLBR_EAX | CLBR_EDX | CLBR_ECX)
16 #define CLBR_RET_REG	(CLBR_EAX | CLBR_EDX)
17 #define CLBR_SCRATCH	(0)
18 #else
19 #define CLBR_RAX  CLBR_EAX
20 #define CLBR_RCX  CLBR_ECX
21 #define CLBR_RDX  CLBR_EDX
22 #define CLBR_RDI  CLBR_EDI
23 #define CLBR_RSI  (1 << 4)
24 #define CLBR_R8   (1 << 5)
25 #define CLBR_R9   (1 << 6)
26 #define CLBR_R10  (1 << 7)
27 #define CLBR_R11  (1 << 8)
28 
29 #define CLBR_ANY  ((1 << 9) - 1)
30 
31 #define CLBR_ARG_REGS	(CLBR_RDI | CLBR_RSI | CLBR_RDX | \
32 			 CLBR_RCX | CLBR_R8 | CLBR_R9)
33 #define CLBR_RET_REG	(CLBR_RAX)
34 #define CLBR_SCRATCH	(CLBR_R10 | CLBR_R11)
35 
36 #endif /* X86_64 */
37 
38 #define CLBR_CALLEE_SAVE ((CLBR_ARG_REGS | CLBR_SCRATCH) & ~CLBR_RET_REG)
39 
40 #ifndef __ASSEMBLY__
41 
42 #include <asm/desc_defs.h>
43 #include <asm/kmap_types.h>
44 
45 struct page;
46 struct thread_struct;
47 struct desc_ptr;
48 struct tss_struct;
49 struct mm_struct;
50 struct desc_struct;
51 struct task_struct;
52 struct cpumask;
53 
54 /*
55  * Wrapper type for pointers to code which uses the non-standard
56  * calling convention.  See PV_CALL_SAVE_REGS_THUNK below.
57  */
58 struct paravirt_callee_save {
59 	void *func;
60 };
61 
62 /* general info */
63 struct pv_info {
64 	unsigned int kernel_rpl;
65 	int shared_kernel_pmd;
66 	int paravirt_enabled;
67 	const char *name;
68 };
69 
70 struct pv_init_ops {
71 	/*
72 	 * Patch may replace one of the defined code sequences with
73 	 * arbitrary code, subject to the same register constraints.
74 	 * This generally means the code is not free to clobber any
75 	 * registers other than EAX.  The patch function should return
76 	 * the number of bytes of code generated, as we nop pad the
77 	 * rest in generic code.
78 	 */
79 	unsigned (*patch)(u8 type, u16 clobber, void *insnbuf,
80 			  unsigned long addr, unsigned len);
81 };
82 
83 
84 struct pv_lazy_ops {
85 	/* Set deferred update mode, used for batching operations. */
86 	void (*enter)(void);
87 	void (*leave)(void);
88 };
89 
90 struct pv_time_ops {
91 	unsigned long long (*sched_clock)(void);
92 	unsigned long (*get_tsc_khz)(void);
93 };
94 
95 struct pv_cpu_ops {
96 	/* hooks for various privileged instructions */
97 	unsigned long (*get_debugreg)(int regno);
98 	void (*set_debugreg)(int regno, unsigned long value);
99 
100 	void (*clts)(void);
101 
102 	unsigned long (*read_cr0)(void);
103 	void (*write_cr0)(unsigned long);
104 
105 	unsigned long (*read_cr4_safe)(void);
106 	unsigned long (*read_cr4)(void);
107 	void (*write_cr4)(unsigned long);
108 
109 #ifdef CONFIG_X86_64
110 	unsigned long (*read_cr8)(void);
111 	void (*write_cr8)(unsigned long);
112 #endif
113 
114 	/* Segment descriptor handling */
115 	void (*load_tr_desc)(void);
116 	void (*load_gdt)(const struct desc_ptr *);
117 	void (*load_idt)(const struct desc_ptr *);
118 	void (*store_gdt)(struct desc_ptr *);
119 	void (*store_idt)(struct desc_ptr *);
120 	void (*set_ldt)(const void *desc, unsigned entries);
121 	unsigned long (*store_tr)(void);
122 	void (*load_tls)(struct thread_struct *t, unsigned int cpu);
123 #ifdef CONFIG_X86_64
124 	void (*load_gs_index)(unsigned int idx);
125 #endif
126 	void (*write_ldt_entry)(struct desc_struct *ldt, int entrynum,
127 				const void *desc);
128 	void (*write_gdt_entry)(struct desc_struct *,
129 				int entrynum, const void *desc, int size);
130 	void (*write_idt_entry)(gate_desc *,
131 				int entrynum, const gate_desc *gate);
132 	void (*alloc_ldt)(struct desc_struct *ldt, unsigned entries);
133 	void (*free_ldt)(struct desc_struct *ldt, unsigned entries);
134 
135 	void (*load_sp0)(struct tss_struct *tss, struct thread_struct *t);
136 
137 	void (*set_iopl_mask)(unsigned mask);
138 
139 	void (*wbinvd)(void);
140 	void (*io_delay)(void);
141 
142 	/* cpuid emulation, mostly so that caps bits can be disabled */
143 	void (*cpuid)(unsigned int *eax, unsigned int *ebx,
144 		      unsigned int *ecx, unsigned int *edx);
145 
146 	/* MSR, PMC and TSR operations.
147 	   err = 0/-EFAULT.  wrmsr returns 0/-EFAULT. */
148 	u64 (*read_msr)(unsigned int msr, int *err);
149 	int (*rdmsr_regs)(u32 *regs);
150 	int (*write_msr)(unsigned int msr, unsigned low, unsigned high);
151 	int (*wrmsr_regs)(u32 *regs);
152 
153 	u64 (*read_tsc)(void);
154 	u64 (*read_pmc)(int counter);
155 	unsigned long long (*read_tscp)(unsigned int *aux);
156 
157 	/*
158 	 * Atomically enable interrupts and return to userspace.  This
159 	 * is only ever used to return to 32-bit processes; in a
160 	 * 64-bit kernel, it's used for 32-on-64 compat processes, but
161 	 * never native 64-bit processes.  (Jump, not call.)
162 	 */
163 	void (*irq_enable_sysexit)(void);
164 
165 	/*
166 	 * Switch to usermode gs and return to 64-bit usermode using
167 	 * sysret.  Only used in 64-bit kernels to return to 64-bit
168 	 * processes.  Usermode register state, including %rsp, must
169 	 * already be restored.
170 	 */
171 	void (*usergs_sysret64)(void);
172 
173 	/*
174 	 * Switch to usermode gs and return to 32-bit usermode using
175 	 * sysret.  Used to return to 32-on-64 compat processes.
176 	 * Other usermode register state, including %esp, must already
177 	 * be restored.
178 	 */
179 	void (*usergs_sysret32)(void);
180 
181 	/* Normal iret.  Jump to this with the standard iret stack
182 	   frame set up. */
183 	void (*iret)(void);
184 
185 	void (*swapgs)(void);
186 
187 	void (*start_context_switch)(struct task_struct *prev);
188 	void (*end_context_switch)(struct task_struct *next);
189 };
190 
191 struct pv_irq_ops {
192 	/*
193 	 * Get/set interrupt state.  save_fl and restore_fl are only
194 	 * expected to use X86_EFLAGS_IF; all other bits
195 	 * returned from save_fl are undefined, and may be ignored by
196 	 * restore_fl.
197 	 *
198 	 * NOTE: These functions callers expect the callee to preserve
199 	 * more registers than the standard C calling convention.
200 	 */
201 	struct paravirt_callee_save save_fl;
202 	struct paravirt_callee_save restore_fl;
203 	struct paravirt_callee_save irq_disable;
204 	struct paravirt_callee_save irq_enable;
205 
206 	void (*safe_halt)(void);
207 	void (*halt)(void);
208 
209 #ifdef CONFIG_X86_64
210 	void (*adjust_exception_frame)(void);
211 #endif
212 };
213 
214 struct pv_apic_ops {
215 #ifdef CONFIG_X86_LOCAL_APIC
216 	void (*startup_ipi_hook)(int phys_apicid,
217 				 unsigned long start_eip,
218 				 unsigned long start_esp);
219 #endif
220 };
221 
222 struct pv_mmu_ops {
223 	unsigned long (*read_cr2)(void);
224 	void (*write_cr2)(unsigned long);
225 
226 	unsigned long (*read_cr3)(void);
227 	void (*write_cr3)(unsigned long);
228 
229 	/*
230 	 * Hooks for intercepting the creation/use/destruction of an
231 	 * mm_struct.
232 	 */
233 	void (*activate_mm)(struct mm_struct *prev,
234 			    struct mm_struct *next);
235 	void (*dup_mmap)(struct mm_struct *oldmm,
236 			 struct mm_struct *mm);
237 	void (*exit_mmap)(struct mm_struct *mm);
238 
239 
240 	/* TLB operations */
241 	void (*flush_tlb_user)(void);
242 	void (*flush_tlb_kernel)(void);
243 	void (*flush_tlb_single)(unsigned long addr);
244 	void (*flush_tlb_others)(const struct cpumask *cpus,
245 				 struct mm_struct *mm,
246 				 unsigned long va);
247 
248 	/* Hooks for allocating and freeing a pagetable top-level */
249 	int  (*pgd_alloc)(struct mm_struct *mm);
250 	void (*pgd_free)(struct mm_struct *mm, pgd_t *pgd);
251 
252 	/*
253 	 * Hooks for allocating/releasing pagetable pages when they're
254 	 * attached to a pagetable
255 	 */
256 	void (*alloc_pte)(struct mm_struct *mm, unsigned long pfn);
257 	void (*alloc_pmd)(struct mm_struct *mm, unsigned long pfn);
258 	void (*alloc_pud)(struct mm_struct *mm, unsigned long pfn);
259 	void (*release_pte)(unsigned long pfn);
260 	void (*release_pmd)(unsigned long pfn);
261 	void (*release_pud)(unsigned long pfn);
262 
263 	/* Pagetable manipulation functions */
264 	void (*set_pte)(pte_t *ptep, pte_t pteval);
265 	void (*set_pte_at)(struct mm_struct *mm, unsigned long addr,
266 			   pte_t *ptep, pte_t pteval);
267 	void (*set_pmd)(pmd_t *pmdp, pmd_t pmdval);
268 	void (*set_pmd_at)(struct mm_struct *mm, unsigned long addr,
269 			   pmd_t *pmdp, pmd_t pmdval);
270 	void (*pte_update)(struct mm_struct *mm, unsigned long addr,
271 			   pte_t *ptep);
272 	void (*pte_update_defer)(struct mm_struct *mm,
273 				 unsigned long addr, pte_t *ptep);
274 	void (*pmd_update)(struct mm_struct *mm, unsigned long addr,
275 			   pmd_t *pmdp);
276 	void (*pmd_update_defer)(struct mm_struct *mm,
277 				 unsigned long addr, pmd_t *pmdp);
278 
279 	pte_t (*ptep_modify_prot_start)(struct mm_struct *mm, unsigned long addr,
280 					pte_t *ptep);
281 	void (*ptep_modify_prot_commit)(struct mm_struct *mm, unsigned long addr,
282 					pte_t *ptep, pte_t pte);
283 
284 	struct paravirt_callee_save pte_val;
285 	struct paravirt_callee_save make_pte;
286 
287 	struct paravirt_callee_save pgd_val;
288 	struct paravirt_callee_save make_pgd;
289 
290 #if PAGETABLE_LEVELS >= 3
291 #ifdef CONFIG_X86_PAE
292 	void (*set_pte_atomic)(pte_t *ptep, pte_t pteval);
293 	void (*pte_clear)(struct mm_struct *mm, unsigned long addr,
294 			  pte_t *ptep);
295 	void (*pmd_clear)(pmd_t *pmdp);
296 
297 #endif	/* CONFIG_X86_PAE */
298 
299 	void (*set_pud)(pud_t *pudp, pud_t pudval);
300 
301 	struct paravirt_callee_save pmd_val;
302 	struct paravirt_callee_save make_pmd;
303 
304 #if PAGETABLE_LEVELS == 4
305 	struct paravirt_callee_save pud_val;
306 	struct paravirt_callee_save make_pud;
307 
308 	void (*set_pgd)(pgd_t *pudp, pgd_t pgdval);
309 #endif	/* PAGETABLE_LEVELS == 4 */
310 #endif	/* PAGETABLE_LEVELS >= 3 */
311 
312 	struct pv_lazy_ops lazy_mode;
313 
314 	/* dom0 ops */
315 
316 	/* Sometimes the physical address is a pfn, and sometimes its
317 	   an mfn.  We can tell which is which from the index. */
318 	void (*set_fixmap)(unsigned /* enum fixed_addresses */ idx,
319 			   phys_addr_t phys, pgprot_t flags);
320 };
321 
322 struct arch_spinlock;
323 struct pv_lock_ops {
324 	int (*spin_is_locked)(struct arch_spinlock *lock);
325 	int (*spin_is_contended)(struct arch_spinlock *lock);
326 	void (*spin_lock)(struct arch_spinlock *lock);
327 	void (*spin_lock_flags)(struct arch_spinlock *lock, unsigned long flags);
328 	int (*spin_trylock)(struct arch_spinlock *lock);
329 	void (*spin_unlock)(struct arch_spinlock *lock);
330 };
331 
332 /* This contains all the paravirt structures: we get a convenient
333  * number for each function using the offset which we use to indicate
334  * what to patch. */
335 struct paravirt_patch_template {
336 	struct pv_init_ops pv_init_ops;
337 	struct pv_time_ops pv_time_ops;
338 	struct pv_cpu_ops pv_cpu_ops;
339 	struct pv_irq_ops pv_irq_ops;
340 	struct pv_apic_ops pv_apic_ops;
341 	struct pv_mmu_ops pv_mmu_ops;
342 	struct pv_lock_ops pv_lock_ops;
343 };
344 
345 extern struct pv_info pv_info;
346 extern struct pv_init_ops pv_init_ops;
347 extern struct pv_time_ops pv_time_ops;
348 extern struct pv_cpu_ops pv_cpu_ops;
349 extern struct pv_irq_ops pv_irq_ops;
350 extern struct pv_apic_ops pv_apic_ops;
351 extern struct pv_mmu_ops pv_mmu_ops;
352 extern struct pv_lock_ops pv_lock_ops;
353 
354 #define PARAVIRT_PATCH(x)					\
355 	(offsetof(struct paravirt_patch_template, x) / sizeof(void *))
356 
357 #define paravirt_type(op)				\
358 	[paravirt_typenum] "i" (PARAVIRT_PATCH(op)),	\
359 	[paravirt_opptr] "i" (&(op))
360 #define paravirt_clobber(clobber)		\
361 	[paravirt_clobber] "i" (clobber)
362 
363 /*
364  * Generate some code, and mark it as patchable by the
365  * apply_paravirt() alternate instruction patcher.
366  */
367 #define _paravirt_alt(insn_string, type, clobber)	\
368 	"771:\n\t" insn_string "\n" "772:\n"		\
369 	".pushsection .parainstructions,\"a\"\n"	\
370 	_ASM_ALIGN "\n"					\
371 	_ASM_PTR " 771b\n"				\
372 	"  .byte " type "\n"				\
373 	"  .byte 772b-771b\n"				\
374 	"  .short " clobber "\n"			\
375 	".popsection\n"
376 
377 /* Generate patchable code, with the default asm parameters. */
378 #define paravirt_alt(insn_string)					\
379 	_paravirt_alt(insn_string, "%c[paravirt_typenum]", "%c[paravirt_clobber]")
380 
381 /* Simple instruction patching code. */
382 #define DEF_NATIVE(ops, name, code) 					\
383 	extern const char start_##ops##_##name[], end_##ops##_##name[];	\
384 	asm("start_" #ops "_" #name ": " code "; end_" #ops "_" #name ":")
385 
386 unsigned paravirt_patch_nop(void);
387 unsigned paravirt_patch_ident_32(void *insnbuf, unsigned len);
388 unsigned paravirt_patch_ident_64(void *insnbuf, unsigned len);
389 unsigned paravirt_patch_ignore(unsigned len);
390 unsigned paravirt_patch_call(void *insnbuf,
391 			     const void *target, u16 tgt_clobbers,
392 			     unsigned long addr, u16 site_clobbers,
393 			     unsigned len);
394 unsigned paravirt_patch_jmp(void *insnbuf, const void *target,
395 			    unsigned long addr, unsigned len);
396 unsigned paravirt_patch_default(u8 type, u16 clobbers, void *insnbuf,
397 				unsigned long addr, unsigned len);
398 
399 unsigned paravirt_patch_insns(void *insnbuf, unsigned len,
400 			      const char *start, const char *end);
401 
402 unsigned native_patch(u8 type, u16 clobbers, void *ibuf,
403 		      unsigned long addr, unsigned len);
404 
405 int paravirt_disable_iospace(void);
406 
407 /*
408  * This generates an indirect call based on the operation type number.
409  * The type number, computed in PARAVIRT_PATCH, is derived from the
410  * offset into the paravirt_patch_template structure, and can therefore be
411  * freely converted back into a structure offset.
412  */
413 #define PARAVIRT_CALL	"call *%c[paravirt_opptr];"
414 
415 /*
416  * These macros are intended to wrap calls through one of the paravirt
417  * ops structs, so that they can be later identified and patched at
418  * runtime.
419  *
420  * Normally, a call to a pv_op function is a simple indirect call:
421  * (pv_op_struct.operations)(args...).
422  *
423  * Unfortunately, this is a relatively slow operation for modern CPUs,
424  * because it cannot necessarily determine what the destination
425  * address is.  In this case, the address is a runtime constant, so at
426  * the very least we can patch the call to e a simple direct call, or
427  * ideally, patch an inline implementation into the callsite.  (Direct
428  * calls are essentially free, because the call and return addresses
429  * are completely predictable.)
430  *
431  * For i386, these macros rely on the standard gcc "regparm(3)" calling
432  * convention, in which the first three arguments are placed in %eax,
433  * %edx, %ecx (in that order), and the remaining arguments are placed
434  * on the stack.  All caller-save registers (eax,edx,ecx) are expected
435  * to be modified (either clobbered or used for return values).
436  * X86_64, on the other hand, already specifies a register-based calling
437  * conventions, returning at %rax, with parameteres going on %rdi, %rsi,
438  * %rdx, and %rcx. Note that for this reason, x86_64 does not need any
439  * special handling for dealing with 4 arguments, unlike i386.
440  * However, x86_64 also have to clobber all caller saved registers, which
441  * unfortunately, are quite a bit (r8 - r11)
442  *
443  * The call instruction itself is marked by placing its start address
444  * and size into the .parainstructions section, so that
445  * apply_paravirt() in arch/i386/kernel/alternative.c can do the
446  * appropriate patching under the control of the backend pv_init_ops
447  * implementation.
448  *
449  * Unfortunately there's no way to get gcc to generate the args setup
450  * for the call, and then allow the call itself to be generated by an
451  * inline asm.  Because of this, we must do the complete arg setup and
452  * return value handling from within these macros.  This is fairly
453  * cumbersome.
454  *
455  * There are 5 sets of PVOP_* macros for dealing with 0-4 arguments.
456  * It could be extended to more arguments, but there would be little
457  * to be gained from that.  For each number of arguments, there are
458  * the two VCALL and CALL variants for void and non-void functions.
459  *
460  * When there is a return value, the invoker of the macro must specify
461  * the return type.  The macro then uses sizeof() on that type to
462  * determine whether its a 32 or 64 bit value, and places the return
463  * in the right register(s) (just %eax for 32-bit, and %edx:%eax for
464  * 64-bit). For x86_64 machines, it just returns at %rax regardless of
465  * the return value size.
466  *
467  * 64-bit arguments are passed as a pair of adjacent 32-bit arguments
468  * i386 also passes 64-bit arguments as a pair of adjacent 32-bit arguments
469  * in low,high order
470  *
471  * Small structures are passed and returned in registers.  The macro
472  * calling convention can't directly deal with this, so the wrapper
473  * functions must do this.
474  *
475  * These PVOP_* macros are only defined within this header.  This
476  * means that all uses must be wrapped in inline functions.  This also
477  * makes sure the incoming and outgoing types are always correct.
478  */
479 #ifdef CONFIG_X86_32
480 #define PVOP_VCALL_ARGS				\
481 	unsigned long __eax = __eax, __edx = __edx, __ecx = __ecx
482 #define PVOP_CALL_ARGS			PVOP_VCALL_ARGS
483 
484 #define PVOP_CALL_ARG1(x)		"a" ((unsigned long)(x))
485 #define PVOP_CALL_ARG2(x)		"d" ((unsigned long)(x))
486 #define PVOP_CALL_ARG3(x)		"c" ((unsigned long)(x))
487 
488 #define PVOP_VCALL_CLOBBERS		"=a" (__eax), "=d" (__edx),	\
489 					"=c" (__ecx)
490 #define PVOP_CALL_CLOBBERS		PVOP_VCALL_CLOBBERS
491 
492 #define PVOP_VCALLEE_CLOBBERS		"=a" (__eax), "=d" (__edx)
493 #define PVOP_CALLEE_CLOBBERS		PVOP_VCALLEE_CLOBBERS
494 
495 #define EXTRA_CLOBBERS
496 #define VEXTRA_CLOBBERS
497 #else  /* CONFIG_X86_64 */
498 /* [re]ax isn't an arg, but the return val */
499 #define PVOP_VCALL_ARGS					\
500 	unsigned long __edi = __edi, __esi = __esi,	\
501 		__edx = __edx, __ecx = __ecx, __eax = __eax
502 #define PVOP_CALL_ARGS		PVOP_VCALL_ARGS
503 
504 #define PVOP_CALL_ARG1(x)		"D" ((unsigned long)(x))
505 #define PVOP_CALL_ARG2(x)		"S" ((unsigned long)(x))
506 #define PVOP_CALL_ARG3(x)		"d" ((unsigned long)(x))
507 #define PVOP_CALL_ARG4(x)		"c" ((unsigned long)(x))
508 
509 #define PVOP_VCALL_CLOBBERS	"=D" (__edi),				\
510 				"=S" (__esi), "=d" (__edx),		\
511 				"=c" (__ecx)
512 #define PVOP_CALL_CLOBBERS	PVOP_VCALL_CLOBBERS, "=a" (__eax)
513 
514 /* void functions are still allowed [re]ax for scratch */
515 #define PVOP_VCALLEE_CLOBBERS	"=a" (__eax)
516 #define PVOP_CALLEE_CLOBBERS	PVOP_VCALLEE_CLOBBERS
517 
518 #define EXTRA_CLOBBERS	 , "r8", "r9", "r10", "r11"
519 #define VEXTRA_CLOBBERS	 , "rax", "r8", "r9", "r10", "r11"
520 #endif	/* CONFIG_X86_32 */
521 
522 #ifdef CONFIG_PARAVIRT_DEBUG
523 #define PVOP_TEST_NULL(op)	BUG_ON(op == NULL)
524 #else
525 #define PVOP_TEST_NULL(op)	((void)op)
526 #endif
527 
528 #define ____PVOP_CALL(rettype, op, clbr, call_clbr, extra_clbr,		\
529 		      pre, post, ...)					\
530 	({								\
531 		rettype __ret;						\
532 		PVOP_CALL_ARGS;						\
533 		PVOP_TEST_NULL(op);					\
534 		/* This is 32-bit specific, but is okay in 64-bit */	\
535 		/* since this condition will never hold */		\
536 		if (sizeof(rettype) > sizeof(unsigned long)) {		\
537 			asm volatile(pre				\
538 				     paravirt_alt(PARAVIRT_CALL)	\
539 				     post				\
540 				     : call_clbr			\
541 				     : paravirt_type(op),		\
542 				       paravirt_clobber(clbr),		\
543 				       ##__VA_ARGS__			\
544 				     : "memory", "cc" extra_clbr);	\
545 			__ret = (rettype)((((u64)__edx) << 32) | __eax); \
546 		} else {						\
547 			asm volatile(pre				\
548 				     paravirt_alt(PARAVIRT_CALL)	\
549 				     post				\
550 				     : call_clbr			\
551 				     : paravirt_type(op),		\
552 				       paravirt_clobber(clbr),		\
553 				       ##__VA_ARGS__			\
554 				     : "memory", "cc" extra_clbr);	\
555 			__ret = (rettype)__eax;				\
556 		}							\
557 		__ret;							\
558 	})
559 
560 #define __PVOP_CALL(rettype, op, pre, post, ...)			\
561 	____PVOP_CALL(rettype, op, CLBR_ANY, PVOP_CALL_CLOBBERS,	\
562 		      EXTRA_CLOBBERS, pre, post, ##__VA_ARGS__)
563 
564 #define __PVOP_CALLEESAVE(rettype, op, pre, post, ...)			\
565 	____PVOP_CALL(rettype, op.func, CLBR_RET_REG,			\
566 		      PVOP_CALLEE_CLOBBERS, ,				\
567 		      pre, post, ##__VA_ARGS__)
568 
569 
570 #define ____PVOP_VCALL(op, clbr, call_clbr, extra_clbr, pre, post, ...)	\
571 	({								\
572 		PVOP_VCALL_ARGS;					\
573 		PVOP_TEST_NULL(op);					\
574 		asm volatile(pre					\
575 			     paravirt_alt(PARAVIRT_CALL)		\
576 			     post					\
577 			     : call_clbr				\
578 			     : paravirt_type(op),			\
579 			       paravirt_clobber(clbr),			\
580 			       ##__VA_ARGS__				\
581 			     : "memory", "cc" extra_clbr);		\
582 	})
583 
584 #define __PVOP_VCALL(op, pre, post, ...)				\
585 	____PVOP_VCALL(op, CLBR_ANY, PVOP_VCALL_CLOBBERS,		\
586 		       VEXTRA_CLOBBERS,					\
587 		       pre, post, ##__VA_ARGS__)
588 
589 #define __PVOP_VCALLEESAVE(op, pre, post, ...)				\
590 	____PVOP_VCALL(op.func, CLBR_RET_REG,				\
591 		      PVOP_VCALLEE_CLOBBERS, ,				\
592 		      pre, post, ##__VA_ARGS__)
593 
594 
595 
596 #define PVOP_CALL0(rettype, op)						\
597 	__PVOP_CALL(rettype, op, "", "")
598 #define PVOP_VCALL0(op)							\
599 	__PVOP_VCALL(op, "", "")
600 
601 #define PVOP_CALLEE0(rettype, op)					\
602 	__PVOP_CALLEESAVE(rettype, op, "", "")
603 #define PVOP_VCALLEE0(op)						\
604 	__PVOP_VCALLEESAVE(op, "", "")
605 
606 
607 #define PVOP_CALL1(rettype, op, arg1)					\
608 	__PVOP_CALL(rettype, op, "", "", PVOP_CALL_ARG1(arg1))
609 #define PVOP_VCALL1(op, arg1)						\
610 	__PVOP_VCALL(op, "", "", PVOP_CALL_ARG1(arg1))
611 
612 #define PVOP_CALLEE1(rettype, op, arg1)					\
613 	__PVOP_CALLEESAVE(rettype, op, "", "", PVOP_CALL_ARG1(arg1))
614 #define PVOP_VCALLEE1(op, arg1)						\
615 	__PVOP_VCALLEESAVE(op, "", "", PVOP_CALL_ARG1(arg1))
616 
617 
618 #define PVOP_CALL2(rettype, op, arg1, arg2)				\
619 	__PVOP_CALL(rettype, op, "", "", PVOP_CALL_ARG1(arg1),		\
620 		    PVOP_CALL_ARG2(arg2))
621 #define PVOP_VCALL2(op, arg1, arg2)					\
622 	__PVOP_VCALL(op, "", "", PVOP_CALL_ARG1(arg1),			\
623 		     PVOP_CALL_ARG2(arg2))
624 
625 #define PVOP_CALLEE2(rettype, op, arg1, arg2)				\
626 	__PVOP_CALLEESAVE(rettype, op, "", "", PVOP_CALL_ARG1(arg1),	\
627 			  PVOP_CALL_ARG2(arg2))
628 #define PVOP_VCALLEE2(op, arg1, arg2)					\
629 	__PVOP_VCALLEESAVE(op, "", "", PVOP_CALL_ARG1(arg1),		\
630 			   PVOP_CALL_ARG2(arg2))
631 
632 
633 #define PVOP_CALL3(rettype, op, arg1, arg2, arg3)			\
634 	__PVOP_CALL(rettype, op, "", "", PVOP_CALL_ARG1(arg1),		\
635 		    PVOP_CALL_ARG2(arg2), PVOP_CALL_ARG3(arg3))
636 #define PVOP_VCALL3(op, arg1, arg2, arg3)				\
637 	__PVOP_VCALL(op, "", "", PVOP_CALL_ARG1(arg1),			\
638 		     PVOP_CALL_ARG2(arg2), PVOP_CALL_ARG3(arg3))
639 
640 /* This is the only difference in x86_64. We can make it much simpler */
641 #ifdef CONFIG_X86_32
642 #define PVOP_CALL4(rettype, op, arg1, arg2, arg3, arg4)			\
643 	__PVOP_CALL(rettype, op,					\
644 		    "push %[_arg4];", "lea 4(%%esp),%%esp;",		\
645 		    PVOP_CALL_ARG1(arg1), PVOP_CALL_ARG2(arg2),		\
646 		    PVOP_CALL_ARG3(arg3), [_arg4] "mr" ((u32)(arg4)))
647 #define PVOP_VCALL4(op, arg1, arg2, arg3, arg4)				\
648 	__PVOP_VCALL(op,						\
649 		    "push %[_arg4];", "lea 4(%%esp),%%esp;",		\
650 		    "0" ((u32)(arg1)), "1" ((u32)(arg2)),		\
651 		    "2" ((u32)(arg3)), [_arg4] "mr" ((u32)(arg4)))
652 #else
653 #define PVOP_CALL4(rettype, op, arg1, arg2, arg3, arg4)			\
654 	__PVOP_CALL(rettype, op, "", "",				\
655 		    PVOP_CALL_ARG1(arg1), PVOP_CALL_ARG2(arg2),		\
656 		    PVOP_CALL_ARG3(arg3), PVOP_CALL_ARG4(arg4))
657 #define PVOP_VCALL4(op, arg1, arg2, arg3, arg4)				\
658 	__PVOP_VCALL(op, "", "",					\
659 		     PVOP_CALL_ARG1(arg1), PVOP_CALL_ARG2(arg2),	\
660 		     PVOP_CALL_ARG3(arg3), PVOP_CALL_ARG4(arg4))
661 #endif
662 
663 /* Lazy mode for batching updates / context switch */
664 enum paravirt_lazy_mode {
665 	PARAVIRT_LAZY_NONE,
666 	PARAVIRT_LAZY_MMU,
667 	PARAVIRT_LAZY_CPU,
668 };
669 
670 enum paravirt_lazy_mode paravirt_get_lazy_mode(void);
671 void paravirt_start_context_switch(struct task_struct *prev);
672 void paravirt_end_context_switch(struct task_struct *next);
673 
674 void paravirt_enter_lazy_mmu(void);
675 void paravirt_leave_lazy_mmu(void);
676 
677 void _paravirt_nop(void);
678 u32 _paravirt_ident_32(u32);
679 u64 _paravirt_ident_64(u64);
680 
681 #define paravirt_nop	((void *)_paravirt_nop)
682 
683 /* These all sit in the .parainstructions section to tell us what to patch. */
684 struct paravirt_patch_site {
685 	u8 *instr; 		/* original instructions */
686 	u8 instrtype;		/* type of this instruction */
687 	u8 len;			/* length of original instruction */
688 	u16 clobbers;		/* what registers you may clobber */
689 };
690 
691 extern struct paravirt_patch_site __parainstructions[],
692 	__parainstructions_end[];
693 
694 #endif	/* __ASSEMBLY__ */
695 
696 #endif	/* _ASM_X86_PARAVIRT_TYPES_H */
697