1 /* SPDX-License-Identifier: GPL-2.0 */ 2 #ifndef _ASM_X86_MWAIT_H 3 #define _ASM_X86_MWAIT_H 4 5 #include <linux/sched.h> 6 #include <linux/sched/idle.h> 7 8 #include <asm/cpufeature.h> 9 #include <asm/nospec-branch.h> 10 11 #define MWAIT_SUBSTATE_MASK 0xf 12 #define MWAIT_CSTATE_MASK 0xf 13 #define MWAIT_SUBSTATE_SIZE 4 14 #define MWAIT_HINT2CSTATE(hint) (((hint) >> MWAIT_SUBSTATE_SIZE) & MWAIT_CSTATE_MASK) 15 #define MWAIT_HINT2SUBSTATE(hint) ((hint) & MWAIT_CSTATE_MASK) 16 #define MWAIT_C1_SUBSTATE_MASK 0xf0 17 18 #define CPUID_MWAIT_LEAF 5 19 #define CPUID5_ECX_EXTENSIONS_SUPPORTED 0x1 20 #define CPUID5_ECX_INTERRUPT_BREAK 0x2 21 22 #define MWAIT_ECX_INTERRUPT_BREAK 0x1 23 #define MWAITX_ECX_TIMER_ENABLE BIT(1) 24 #define MWAITX_MAX_WAIT_CYCLES UINT_MAX 25 #define MWAITX_DISABLE_CSTATES 0xf0 26 #define TPAUSE_C01_STATE 1 27 #define TPAUSE_C02_STATE 0 28 29 static __always_inline void __monitor(const void *eax, unsigned long ecx, 30 unsigned long edx) 31 { 32 /* "monitor %eax, %ecx, %edx;" */ 33 asm volatile(".byte 0x0f, 0x01, 0xc8;" 34 :: "a" (eax), "c" (ecx), "d"(edx)); 35 } 36 37 static __always_inline void __monitorx(const void *eax, unsigned long ecx, 38 unsigned long edx) 39 { 40 /* "monitorx %eax, %ecx, %edx;" */ 41 asm volatile(".byte 0x0f, 0x01, 0xfa;" 42 :: "a" (eax), "c" (ecx), "d"(edx)); 43 } 44 45 static __always_inline void __mwait(unsigned long eax, unsigned long ecx) 46 { 47 mds_idle_clear_cpu_buffers(); 48 49 /* "mwait %eax, %ecx;" */ 50 asm volatile(".byte 0x0f, 0x01, 0xc9;" 51 :: "a" (eax), "c" (ecx)); 52 } 53 54 /* 55 * MWAITX allows for a timer expiration to get the core out a wait state in 56 * addition to the default MWAIT exit condition of a store appearing at a 57 * monitored virtual address. 58 * 59 * Registers: 60 * 61 * MWAITX ECX[1]: enable timer if set 62 * MWAITX EBX[31:0]: max wait time expressed in SW P0 clocks. The software P0 63 * frequency is the same as the TSC frequency. 64 * 65 * Below is a comparison between MWAIT and MWAITX on AMD processors: 66 * 67 * MWAIT MWAITX 68 * opcode 0f 01 c9 | 0f 01 fb 69 * ECX[0] value of RFLAGS.IF seen by instruction 70 * ECX[1] unused/#GP if set | enable timer if set 71 * ECX[31:2] unused/#GP if set 72 * EAX unused (reserve for hint) 73 * EBX[31:0] unused | max wait time (P0 clocks) 74 * 75 * MONITOR MONITORX 76 * opcode 0f 01 c8 | 0f 01 fa 77 * EAX (logical) address to monitor 78 * ECX #GP if not zero 79 */ 80 static __always_inline void __mwaitx(unsigned long eax, unsigned long ebx, 81 unsigned long ecx) 82 { 83 /* No MDS buffer clear as this is AMD/HYGON only */ 84 85 /* "mwaitx %eax, %ebx, %ecx;" */ 86 asm volatile(".byte 0x0f, 0x01, 0xfb;" 87 :: "a" (eax), "b" (ebx), "c" (ecx)); 88 } 89 90 static __always_inline void __sti_mwait(unsigned long eax, unsigned long ecx) 91 { 92 mds_idle_clear_cpu_buffers(); 93 /* "mwait %eax, %ecx;" */ 94 asm volatile("sti; .byte 0x0f, 0x01, 0xc9;" 95 :: "a" (eax), "c" (ecx)); 96 } 97 98 /* 99 * This uses new MONITOR/MWAIT instructions on P4 processors with PNI, 100 * which can obviate IPI to trigger checking of need_resched. 101 * We execute MONITOR against need_resched and enter optimized wait state 102 * through MWAIT. Whenever someone changes need_resched, we would be woken 103 * up from MWAIT (without an IPI). 104 * 105 * New with Core Duo processors, MWAIT can take some hints based on CPU 106 * capability. 107 */ 108 static __always_inline void mwait_idle_with_hints(unsigned long eax, unsigned long ecx) 109 { 110 if (static_cpu_has_bug(X86_BUG_MONITOR) || !current_set_polling_and_test()) { 111 if (static_cpu_has_bug(X86_BUG_CLFLUSH_MONITOR)) { 112 mb(); 113 clflush((void *)¤t_thread_info()->flags); 114 mb(); 115 } 116 117 __monitor((void *)¤t_thread_info()->flags, 0, 0); 118 if (!need_resched()) 119 __mwait(eax, ecx); 120 } 121 current_clr_polling(); 122 } 123 124 /* 125 * Caller can specify whether to enter C0.1 (low latency, less 126 * power saving) or C0.2 state (saves more power, but longer wakeup 127 * latency). This may be overridden by the IA32_UMWAIT_CONTROL MSR 128 * which can force requests for C0.2 to be downgraded to C0.1. 129 */ 130 static inline void __tpause(u32 ecx, u32 edx, u32 eax) 131 { 132 /* "tpause %ecx, %edx, %eax;" */ 133 #ifdef CONFIG_AS_TPAUSE 134 asm volatile("tpause %%ecx\n" 135 : 136 : "c"(ecx), "d"(edx), "a"(eax)); 137 #else 138 asm volatile(".byte 0x66, 0x0f, 0xae, 0xf1\t\n" 139 : 140 : "c"(ecx), "d"(edx), "a"(eax)); 141 #endif 142 } 143 144 #endif /* _ASM_X86_MWAIT_H */ 145