xref: /openbmc/linux/arch/x86/include/asm/mce.h (revision d3964221)
1 /* SPDX-License-Identifier: GPL-2.0 */
2 #ifndef _ASM_X86_MCE_H
3 #define _ASM_X86_MCE_H
4 
5 #include <uapi/asm/mce.h>
6 
7 /*
8  * Machine Check support for x86
9  */
10 
11 /* MCG_CAP register defines */
12 #define MCG_BANKCNT_MASK	0xff         /* Number of Banks */
13 #define MCG_CTL_P		(1ULL<<8)    /* MCG_CTL register available */
14 #define MCG_EXT_P		(1ULL<<9)    /* Extended registers available */
15 #define MCG_CMCI_P		(1ULL<<10)   /* CMCI supported */
16 #define MCG_EXT_CNT_MASK	0xff0000     /* Number of Extended registers */
17 #define MCG_EXT_CNT_SHIFT	16
18 #define MCG_EXT_CNT(c)		(((c) & MCG_EXT_CNT_MASK) >> MCG_EXT_CNT_SHIFT)
19 #define MCG_SER_P		(1ULL<<24)   /* MCA recovery/new status bits */
20 #define MCG_ELOG_P		(1ULL<<26)   /* Extended error log supported */
21 #define MCG_LMCE_P		(1ULL<<27)   /* Local machine check supported */
22 
23 /* MCG_STATUS register defines */
24 #define MCG_STATUS_RIPV  (1ULL<<0)   /* restart ip valid */
25 #define MCG_STATUS_EIPV  (1ULL<<1)   /* ip points to correct instruction */
26 #define MCG_STATUS_MCIP  (1ULL<<2)   /* machine check in progress */
27 #define MCG_STATUS_LMCES (1ULL<<3)   /* LMCE signaled */
28 
29 /* MCG_EXT_CTL register defines */
30 #define MCG_EXT_CTL_LMCE_EN (1ULL<<0) /* Enable LMCE */
31 
32 /* MCi_STATUS register defines */
33 #define MCI_STATUS_VAL   (1ULL<<63)  /* valid error */
34 #define MCI_STATUS_OVER  (1ULL<<62)  /* previous errors lost */
35 #define MCI_STATUS_UC    (1ULL<<61)  /* uncorrected error */
36 #define MCI_STATUS_EN    (1ULL<<60)  /* error enabled */
37 #define MCI_STATUS_MISCV (1ULL<<59)  /* misc error reg. valid */
38 #define MCI_STATUS_ADDRV (1ULL<<58)  /* addr reg. valid */
39 #define MCI_STATUS_PCC   (1ULL<<57)  /* processor context corrupt */
40 #define MCI_STATUS_S	 (1ULL<<56)  /* Signaled machine check */
41 #define MCI_STATUS_AR	 (1ULL<<55)  /* Action required */
42 
43 /* AMD-specific bits */
44 #define MCI_STATUS_TCC		(1ULL<<55)  /* Task context corrupt */
45 #define MCI_STATUS_SYNDV	(1ULL<<53)  /* synd reg. valid */
46 #define MCI_STATUS_DEFERRED	(1ULL<<44)  /* uncorrected error, deferred exception */
47 #define MCI_STATUS_POISON	(1ULL<<43)  /* access poisonous data */
48 
49 /*
50  * McaX field if set indicates a given bank supports MCA extensions:
51  *  - Deferred error interrupt type is specifiable by bank.
52  *  - MCx_MISC0[BlkPtr] field indicates presence of extended MISC registers,
53  *    But should not be used to determine MSR numbers.
54  *  - TCC bit is present in MCx_STATUS.
55  */
56 #define MCI_CONFIG_MCAX		0x1
57 #define MCI_IPID_MCATYPE	0xFFFF0000
58 #define MCI_IPID_HWID		0xFFF
59 
60 /*
61  * Note that the full MCACOD field of IA32_MCi_STATUS MSR is
62  * bits 15:0.  But bit 12 is the 'F' bit, defined for corrected
63  * errors to indicate that errors are being filtered by hardware.
64  * We should mask out bit 12 when looking for specific signatures
65  * of uncorrected errors - so the F bit is deliberately skipped
66  * in this #define.
67  */
68 #define MCACOD		  0xefff     /* MCA Error Code */
69 
70 /* Architecturally defined codes from SDM Vol. 3B Chapter 15 */
71 #define MCACOD_SCRUB	0x00C0	/* 0xC0-0xCF Memory Scrubbing */
72 #define MCACOD_SCRUBMSK	0xeff0	/* Skip bit 12 ('F' bit) */
73 #define MCACOD_L3WB	0x017A	/* L3 Explicit Writeback */
74 #define MCACOD_DATA	0x0134	/* Data Load */
75 #define MCACOD_INSTR	0x0150	/* Instruction Fetch */
76 
77 /* MCi_MISC register defines */
78 #define MCI_MISC_ADDR_LSB(m)	((m) & 0x3f)
79 #define MCI_MISC_ADDR_MODE(m)	(((m) >> 6) & 7)
80 #define  MCI_MISC_ADDR_SEGOFF	0	/* segment offset */
81 #define  MCI_MISC_ADDR_LINEAR	1	/* linear address */
82 #define  MCI_MISC_ADDR_PHYS	2	/* physical address */
83 #define  MCI_MISC_ADDR_MEM	3	/* memory address */
84 #define  MCI_MISC_ADDR_GENERIC	7	/* generic */
85 
86 /* CTL2 register defines */
87 #define MCI_CTL2_CMCI_EN		(1ULL << 30)
88 #define MCI_CTL2_CMCI_THRESHOLD_MASK	0x7fffULL
89 
90 #define MCJ_CTX_MASK		3
91 #define MCJ_CTX(flags)		((flags) & MCJ_CTX_MASK)
92 #define MCJ_CTX_RANDOM		0    /* inject context: random */
93 #define MCJ_CTX_PROCESS		0x1  /* inject context: process */
94 #define MCJ_CTX_IRQ		0x2  /* inject context: IRQ */
95 #define MCJ_NMI_BROADCAST	0x4  /* do NMI broadcasting */
96 #define MCJ_EXCEPTION		0x8  /* raise as exception */
97 #define MCJ_IRQ_BROADCAST	0x10 /* do IRQ broadcasting */
98 
99 #define MCE_OVERFLOW 0		/* bit 0 in flags means overflow */
100 
101 #define MCE_LOG_LEN 32
102 #define MCE_LOG_SIGNATURE	"MACHINECHECK"
103 
104 /* AMD Scalable MCA */
105 #define MSR_AMD64_SMCA_MC0_CTL		0xc0002000
106 #define MSR_AMD64_SMCA_MC0_STATUS	0xc0002001
107 #define MSR_AMD64_SMCA_MC0_ADDR		0xc0002002
108 #define MSR_AMD64_SMCA_MC0_MISC0	0xc0002003
109 #define MSR_AMD64_SMCA_MC0_CONFIG	0xc0002004
110 #define MSR_AMD64_SMCA_MC0_IPID		0xc0002005
111 #define MSR_AMD64_SMCA_MC0_SYND		0xc0002006
112 #define MSR_AMD64_SMCA_MC0_DESTAT	0xc0002008
113 #define MSR_AMD64_SMCA_MC0_DEADDR	0xc0002009
114 #define MSR_AMD64_SMCA_MC0_MISC1	0xc000200a
115 #define MSR_AMD64_SMCA_MCx_CTL(x)	(MSR_AMD64_SMCA_MC0_CTL + 0x10*(x))
116 #define MSR_AMD64_SMCA_MCx_STATUS(x)	(MSR_AMD64_SMCA_MC0_STATUS + 0x10*(x))
117 #define MSR_AMD64_SMCA_MCx_ADDR(x)	(MSR_AMD64_SMCA_MC0_ADDR + 0x10*(x))
118 #define MSR_AMD64_SMCA_MCx_MISC(x)	(MSR_AMD64_SMCA_MC0_MISC0 + 0x10*(x))
119 #define MSR_AMD64_SMCA_MCx_CONFIG(x)	(MSR_AMD64_SMCA_MC0_CONFIG + 0x10*(x))
120 #define MSR_AMD64_SMCA_MCx_IPID(x)	(MSR_AMD64_SMCA_MC0_IPID + 0x10*(x))
121 #define MSR_AMD64_SMCA_MCx_SYND(x)	(MSR_AMD64_SMCA_MC0_SYND + 0x10*(x))
122 #define MSR_AMD64_SMCA_MCx_DESTAT(x)	(MSR_AMD64_SMCA_MC0_DESTAT + 0x10*(x))
123 #define MSR_AMD64_SMCA_MCx_DEADDR(x)	(MSR_AMD64_SMCA_MC0_DEADDR + 0x10*(x))
124 #define MSR_AMD64_SMCA_MCx_MISCy(x, y)	((MSR_AMD64_SMCA_MC0_MISC1 + y) + (0x10*(x)))
125 
126 /*
127  * This structure contains all data related to the MCE log.  Also
128  * carries a signature to make it easier to find from external
129  * debugging tools.  Each entry is only valid when its finished flag
130  * is set.
131  */
132 struct mce_log_buffer {
133 	char signature[12]; /* "MACHINECHECK" */
134 	unsigned len;	    /* = MCE_LOG_LEN */
135 	unsigned next;
136 	unsigned flags;
137 	unsigned recordlen;	/* length of struct mce */
138 	struct mce entry[MCE_LOG_LEN];
139 };
140 
141 struct mca_config {
142 	bool dont_log_ce;
143 	bool cmci_disabled;
144 	bool lmce_disabled;
145 	bool ignore_ce;
146 	bool disabled;
147 	bool ser;
148 	bool recovery;
149 	bool bios_cmci_threshold;
150 	u8 banks;
151 	s8 bootlog;
152 	int tolerant;
153 	int monarch_timeout;
154 	int panic_timeout;
155 	u32 rip_msr;
156 };
157 
158 struct mce_vendor_flags {
159 	/*
160 	 * Indicates that overflow conditions are not fatal, when set.
161 	 */
162 	__u64 overflow_recov	: 1,
163 
164 	/*
165 	 * (AMD) SUCCOR stands for S/W UnCorrectable error COntainment and
166 	 * Recovery. It indicates support for data poisoning in HW and deferred
167 	 * error interrupts.
168 	 */
169 	      succor		: 1,
170 
171 	/*
172 	 * (AMD) SMCA: This bit indicates support for Scalable MCA which expands
173 	 * the register space for each MCA bank and also increases number of
174 	 * banks. Also, to accommodate the new banks and registers, the MCA
175 	 * register space is moved to a new MSR range.
176 	 */
177 	      smca		: 1,
178 
179 	      __reserved_0	: 61;
180 };
181 
182 struct mca_msr_regs {
183 	u32 (*ctl)	(int bank);
184 	u32 (*status)	(int bank);
185 	u32 (*addr)	(int bank);
186 	u32 (*misc)	(int bank);
187 };
188 
189 extern struct mce_vendor_flags mce_flags;
190 
191 extern struct mca_msr_regs msr_ops;
192 
193 enum mce_notifier_prios {
194 	MCE_PRIO_FIRST		= INT_MAX,
195 	MCE_PRIO_SRAO		= INT_MAX - 1,
196 	MCE_PRIO_EXTLOG		= INT_MAX - 2,
197 	MCE_PRIO_NFIT		= INT_MAX - 3,
198 	MCE_PRIO_EDAC		= INT_MAX - 4,
199 	MCE_PRIO_MCELOG		= 1,
200 	MCE_PRIO_LOWEST		= 0,
201 };
202 
203 extern void mce_register_decode_chain(struct notifier_block *nb);
204 extern void mce_unregister_decode_chain(struct notifier_block *nb);
205 
206 #include <linux/percpu.h>
207 #include <linux/atomic.h>
208 
209 extern int mce_p5_enabled;
210 
211 #ifdef CONFIG_X86_MCE
212 int mcheck_init(void);
213 void mcheck_cpu_init(struct cpuinfo_x86 *c);
214 void mcheck_cpu_clear(struct cpuinfo_x86 *c);
215 void mcheck_vendor_init_severity(void);
216 #else
217 static inline int mcheck_init(void) { return 0; }
218 static inline void mcheck_cpu_init(struct cpuinfo_x86 *c) {}
219 static inline void mcheck_cpu_clear(struct cpuinfo_x86 *c) {}
220 static inline void mcheck_vendor_init_severity(void) {}
221 #endif
222 
223 #ifdef CONFIG_X86_ANCIENT_MCE
224 void intel_p5_mcheck_init(struct cpuinfo_x86 *c);
225 void winchip_mcheck_init(struct cpuinfo_x86 *c);
226 static inline void enable_p5_mce(void) { mce_p5_enabled = 1; }
227 #else
228 static inline void intel_p5_mcheck_init(struct cpuinfo_x86 *c) {}
229 static inline void winchip_mcheck_init(struct cpuinfo_x86 *c) {}
230 static inline void enable_p5_mce(void) {}
231 #endif
232 
233 void mce_setup(struct mce *m);
234 void mce_log(struct mce *m);
235 DECLARE_PER_CPU(struct device *, mce_device);
236 
237 /*
238  * Maximum banks number.
239  * This is the limit of the current register layout on
240  * Intel CPUs.
241  */
242 #define MAX_NR_BANKS 32
243 
244 #ifdef CONFIG_X86_MCE_INTEL
245 void mce_intel_feature_init(struct cpuinfo_x86 *c);
246 void mce_intel_feature_clear(struct cpuinfo_x86 *c);
247 void cmci_clear(void);
248 void cmci_reenable(void);
249 void cmci_rediscover(void);
250 void cmci_recheck(void);
251 #else
252 static inline void mce_intel_feature_init(struct cpuinfo_x86 *c) { }
253 static inline void mce_intel_feature_clear(struct cpuinfo_x86 *c) { }
254 static inline void cmci_clear(void) {}
255 static inline void cmci_reenable(void) {}
256 static inline void cmci_rediscover(void) {}
257 static inline void cmci_recheck(void) {}
258 #endif
259 
260 #ifdef CONFIG_X86_MCE_AMD
261 void mce_amd_feature_init(struct cpuinfo_x86 *c);
262 int umc_normaddr_to_sysaddr(u64 norm_addr, u16 nid, u8 umc, u64 *sys_addr);
263 #else
264 static inline void mce_amd_feature_init(struct cpuinfo_x86 *c) { }
265 static inline int umc_normaddr_to_sysaddr(u64 norm_addr, u16 nid, u8 umc, u64 *sys_addr) { return -EINVAL; };
266 #endif
267 
268 int mce_available(struct cpuinfo_x86 *c);
269 bool mce_is_memory_error(struct mce *m);
270 
271 DECLARE_PER_CPU(unsigned, mce_exception_count);
272 DECLARE_PER_CPU(unsigned, mce_poll_count);
273 
274 typedef DECLARE_BITMAP(mce_banks_t, MAX_NR_BANKS);
275 DECLARE_PER_CPU(mce_banks_t, mce_poll_banks);
276 
277 enum mcp_flags {
278 	MCP_TIMESTAMP	= BIT(0),	/* log time stamp */
279 	MCP_UC		= BIT(1),	/* log uncorrected errors */
280 	MCP_DONTLOG	= BIT(2),	/* only clear, don't log */
281 };
282 bool machine_check_poll(enum mcp_flags flags, mce_banks_t *b);
283 
284 int mce_notify_irq(void);
285 
286 DECLARE_PER_CPU(struct mce, injectm);
287 
288 /* Disable CMCI/polling for MCA bank claimed by firmware */
289 extern void mce_disable_bank(int bank);
290 
291 /*
292  * Exception handler
293  */
294 
295 /* Call the installed machine check handler for this CPU setup. */
296 extern void (*machine_check_vector)(struct pt_regs *, long error_code);
297 void do_machine_check(struct pt_regs *, long);
298 
299 /*
300  * Threshold handler
301  */
302 extern void (*mce_threshold_vector)(void);
303 
304 /* Deferred error interrupt handler */
305 extern void (*deferred_error_int_vector)(void);
306 
307 /*
308  * Thermal handler
309  */
310 
311 void intel_init_thermal(struct cpuinfo_x86 *c);
312 
313 /* Interrupt Handler for core thermal thresholds */
314 extern int (*platform_thermal_notify)(__u64 msr_val);
315 
316 /* Interrupt Handler for package thermal thresholds */
317 extern int (*platform_thermal_package_notify)(__u64 msr_val);
318 
319 /* Callback support of rate control, return true, if
320  * callback has rate control */
321 extern bool (*platform_thermal_package_rate_control)(void);
322 
323 #ifdef CONFIG_X86_THERMAL_VECTOR
324 extern void mcheck_intel_therm_init(void);
325 #else
326 static inline void mcheck_intel_therm_init(void) { }
327 #endif
328 
329 /*
330  * Used by APEI to report memory error via /dev/mcelog
331  */
332 
333 struct cper_sec_mem_err;
334 extern void apei_mce_report_mem_error(int corrected,
335 				      struct cper_sec_mem_err *mem_err);
336 
337 /*
338  * Enumerate new IP types and HWID values in AMD processors which support
339  * Scalable MCA.
340  */
341 #ifdef CONFIG_X86_MCE_AMD
342 
343 /* These may be used by multiple smca_hwid_mcatypes */
344 enum smca_bank_types {
345 	SMCA_LS = 0,	/* Load Store */
346 	SMCA_IF,	/* Instruction Fetch */
347 	SMCA_L2_CACHE,	/* L2 Cache */
348 	SMCA_DE,	/* Decoder Unit */
349 	SMCA_EX,	/* Execution Unit */
350 	SMCA_FP,	/* Floating Point */
351 	SMCA_L3_CACHE,	/* L3 Cache */
352 	SMCA_CS,	/* Coherent Slave */
353 	SMCA_PIE,	/* Power, Interrupts, etc. */
354 	SMCA_UMC,	/* Unified Memory Controller */
355 	SMCA_PB,	/* Parameter Block */
356 	SMCA_PSP,	/* Platform Security Processor */
357 	SMCA_SMU,	/* System Management Unit */
358 	N_SMCA_BANK_TYPES
359 };
360 
361 #define HWID_MCATYPE(hwid, mcatype) (((hwid) << 16) | (mcatype))
362 
363 struct smca_hwid {
364 	unsigned int bank_type;	/* Use with smca_bank_types for easy indexing. */
365 	u32 hwid_mcatype;	/* (hwid,mcatype) tuple */
366 	u32 xec_bitmap;		/* Bitmap of valid ExtErrorCodes; current max is 21. */
367 	u8 count;		/* Number of instances. */
368 };
369 
370 struct smca_bank {
371 	struct smca_hwid *hwid;
372 	u32 id;			/* Value of MCA_IPID[InstanceId]. */
373 	u8 sysfs_id;		/* Value used for sysfs name. */
374 };
375 
376 extern struct smca_bank smca_banks[MAX_NR_BANKS];
377 
378 extern const char *smca_get_long_name(enum smca_bank_types t);
379 
380 extern int mce_threshold_create_device(unsigned int cpu);
381 extern int mce_threshold_remove_device(unsigned int cpu);
382 
383 #else
384 
385 static inline int mce_threshold_create_device(unsigned int cpu) { return 0; };
386 static inline int mce_threshold_remove_device(unsigned int cpu) { return 0; };
387 
388 #endif
389 
390 #endif /* _ASM_X86_MCE_H */
391