1 /* SPDX-License-Identifier: GPL-2.0 */ 2 /* 3 * Machine dependent access functions for RTC registers. 4 */ 5 #ifndef _ASM_X86_MC146818RTC_H 6 #define _ASM_X86_MC146818RTC_H 7 8 #include <asm/io.h> 9 #include <asm/processor.h> 10 11 #ifndef RTC_PORT 12 #define RTC_PORT(x) (0x70 + (x)) 13 #define RTC_ALWAYS_BCD 1 /* RTC operates in binary mode */ 14 #endif 15 16 #if defined(CONFIG_X86_32) 17 /* 18 * This lock provides nmi access to the CMOS/RTC registers. It has some 19 * special properties. It is owned by a CPU and stores the index register 20 * currently being accessed (if owned). The idea here is that it works 21 * like a normal lock (normally). However, in an NMI, the NMI code will 22 * first check to see if its CPU owns the lock, meaning that the NMI 23 * interrupted during the read/write of the device. If it does, it goes ahead 24 * and performs the access and then restores the index register. If it does 25 * not, it locks normally. 26 * 27 * Note that since we are working with NMIs, we need this lock even in 28 * a non-SMP machine just to mark that the lock is owned. 29 * 30 * This only works with compare-and-swap. There is no other way to 31 * atomically claim the lock and set the owner. 32 */ 33 #include <linux/smp.h> 34 extern volatile unsigned long cmos_lock; 35 36 /* 37 * All of these below must be called with interrupts off, preempt 38 * disabled, etc. 39 */ 40 41 static inline void lock_cmos(unsigned char reg) 42 { 43 unsigned long new; 44 new = ((smp_processor_id() + 1) << 8) | reg; 45 for (;;) { 46 if (cmos_lock) { 47 cpu_relax(); 48 continue; 49 } 50 if (__cmpxchg(&cmos_lock, 0, new, sizeof(cmos_lock)) == 0) 51 return; 52 } 53 } 54 55 static inline void unlock_cmos(void) 56 { 57 cmos_lock = 0; 58 } 59 60 static inline int do_i_have_lock_cmos(void) 61 { 62 return (cmos_lock >> 8) == (smp_processor_id() + 1); 63 } 64 65 static inline unsigned char current_lock_cmos_reg(void) 66 { 67 return cmos_lock & 0xff; 68 } 69 70 #define lock_cmos_prefix(reg) \ 71 do { \ 72 unsigned long cmos_flags; \ 73 local_irq_save(cmos_flags); \ 74 lock_cmos(reg) 75 76 #define lock_cmos_suffix(reg) \ 77 unlock_cmos(); \ 78 local_irq_restore(cmos_flags); \ 79 } while (0) 80 #else 81 #define lock_cmos_prefix(reg) do {} while (0) 82 #define lock_cmos_suffix(reg) do {} while (0) 83 #define lock_cmos(reg) do { } while (0) 84 #define unlock_cmos() do { } while (0) 85 #define do_i_have_lock_cmos() 0 86 #define current_lock_cmos_reg() 0 87 #endif 88 89 /* 90 * The yet supported machines all access the RTC index register via 91 * an ISA port access but the way to access the date register differs ... 92 */ 93 #define CMOS_READ(addr) rtc_cmos_read(addr) 94 #define CMOS_WRITE(val, addr) rtc_cmos_write(val, addr) 95 unsigned char rtc_cmos_read(unsigned char addr); 96 void rtc_cmos_write(unsigned char val, unsigned char addr); 97 98 extern int mach_set_rtc_mmss(const struct timespec64 *now); 99 extern void mach_get_cmos_time(struct timespec64 *now); 100 101 #define RTC_IRQ 8 102 103 #endif /* _ASM_X86_MC146818RTC_H */ 104