xref: /openbmc/linux/arch/x86/include/asm/intel-mid.h (revision f2f4bf5a)
1 /* SPDX-License-Identifier: GPL-2.0-only */
2 /*
3  * intel-mid.h: Intel MID specific setup code
4  *
5  * (C) Copyright 2009 Intel Corporation
6  */
7 #ifndef _ASM_X86_INTEL_MID_H
8 #define _ASM_X86_INTEL_MID_H
9 
10 #include <linux/sfi.h>
11 #include <linux/pci.h>
12 #include <linux/platform_device.h>
13 
14 extern int intel_mid_pci_init(void);
15 extern int intel_mid_pci_set_power_state(struct pci_dev *pdev, pci_power_t state);
16 extern pci_power_t intel_mid_pci_get_power_state(struct pci_dev *pdev);
17 
18 extern void intel_mid_pwr_power_off(void);
19 
20 #define INTEL_MID_PWR_LSS_OFFSET	4
21 #define INTEL_MID_PWR_LSS_TYPE		(1 << 7)
22 
23 extern int intel_mid_pwr_get_lss_id(struct pci_dev *pdev);
24 
25 extern int get_gpio_by_name(const char *name);
26 extern int __init sfi_parse_mrtc(struct sfi_table_header *table);
27 extern int __init sfi_parse_mtmr(struct sfi_table_header *table);
28 extern int sfi_mrtc_num;
29 extern struct sfi_rtc_table_entry sfi_mrtc_array[];
30 
31 /*
32  * Here defines the array of devices platform data that IAFW would export
33  * through SFI "DEVS" table, we use name and type to match the device and
34  * its platform data.
35  */
36 struct devs_id {
37 	char name[SFI_NAME_LEN + 1];
38 	u8 type;
39 	u8 delay;
40 	u8 msic;
41 	void *(*get_platform_data)(void *info);
42 };
43 
44 #define sfi_device(i)								\
45 	static const struct devs_id *const __intel_mid_sfi_##i##_dev __used	\
46 	__attribute__((__section__(".x86_intel_mid_dev.init"))) = &i
47 
48 /**
49 * struct mid_sd_board_info - template for SD device creation
50 * @name:		identifies the driver
51 * @bus_num:		board-specific identifier for a given SD controller
52 * @max_clk:		the maximum frequency device supports
53 * @platform_data:	the particular data stored there is driver-specific
54 */
55 struct mid_sd_board_info {
56 	char		name[SFI_NAME_LEN];
57 	int		bus_num;
58 	unsigned short	addr;
59 	u32		max_clk;
60 	void		*platform_data;
61 };
62 
63 /*
64  * Medfield is the follow-up of Moorestown, it combines two chip solution into
65  * one. Other than that it also added always-on and constant tsc and lapic
66  * timers. Medfield is the platform name, and the chip name is called Penwell
67  * we treat Medfield/Penwell as a variant of Moorestown. Penwell can be
68  * identified via MSRs.
69  */
70 enum intel_mid_cpu_type {
71 	/* 1 was Moorestown */
72 	INTEL_MID_CPU_CHIP_PENWELL = 2,
73 	INTEL_MID_CPU_CHIP_CLOVERVIEW,
74 	INTEL_MID_CPU_CHIP_TANGIER,
75 };
76 
77 extern enum intel_mid_cpu_type __intel_mid_cpu_chip;
78 
79 #ifdef CONFIG_X86_INTEL_MID
80 
81 static inline enum intel_mid_cpu_type intel_mid_identify_cpu(void)
82 {
83 	return __intel_mid_cpu_chip;
84 }
85 
86 static inline bool intel_mid_has_msic(void)
87 {
88 	return (intel_mid_identify_cpu() == INTEL_MID_CPU_CHIP_PENWELL);
89 }
90 
91 #else /* !CONFIG_X86_INTEL_MID */
92 
93 #define intel_mid_identify_cpu()	0
94 #define intel_mid_has_msic()		0
95 
96 #endif /* !CONFIG_X86_INTEL_MID */
97 
98 enum intel_mid_timer_options {
99 	INTEL_MID_TIMER_DEFAULT,
100 	INTEL_MID_TIMER_APBT_ONLY,
101 	INTEL_MID_TIMER_LAPIC_APBT,
102 };
103 
104 extern enum intel_mid_timer_options intel_mid_timer_options;
105 
106 /* Bus Select SoC Fuse value */
107 #define BSEL_SOC_FUSE_MASK		0x7
108 /* FSB 133MHz */
109 #define BSEL_SOC_FUSE_001		0x1
110 /* FSB 100MHz */
111 #define BSEL_SOC_FUSE_101		0x5
112 /* FSB 83MHz */
113 #define BSEL_SOC_FUSE_111		0x7
114 
115 #define SFI_MTMR_MAX_NUM		8
116 #define SFI_MRTC_MAX			8
117 
118 extern void intel_scu_devices_create(void);
119 extern void intel_scu_devices_destroy(void);
120 
121 /* VRTC timer */
122 #define MRST_VRTC_MAP_SZ		1024
123 /* #define MRST_VRTC_PGOFFSET		0xc00 */
124 
125 extern void intel_mid_rtc_init(void);
126 
127 /* The offset for the mapping of global gpio pin to irq */
128 #define INTEL_MID_IRQ_OFFSET		0x100
129 
130 #endif /* _ASM_X86_INTEL_MID_H */
131