xref: /openbmc/linux/arch/x86/include/asm/imr.h (revision 74be2d3b)
1 /* SPDX-License-Identifier: GPL-2.0-only */
2 /*
3  * imr.h: Isolated Memory Region API
4  *
5  * Copyright(c) 2013 Intel Corporation.
6  * Copyright(c) 2015 Bryan O'Donoghue <pure.logic@nexus-software.ie>
7  */
8 #ifndef _IMR_H
9 #define _IMR_H
10 
11 #include <linux/types.h>
12 
13 /*
14  * IMR agent access mask bits
15  * See section 12.7.4.7 from quark-x1000-datasheet.pdf for register
16  * definitions.
17  */
18 #define IMR_ESRAM_FLUSH		BIT(31)
19 #define IMR_CPU_SNOOP		BIT(30)		/* Applicable only to write */
20 #define IMR_RMU			BIT(29)
21 #define IMR_VC1_SAI_ID3		BIT(15)
22 #define IMR_VC1_SAI_ID2		BIT(14)
23 #define IMR_VC1_SAI_ID1		BIT(13)
24 #define IMR_VC1_SAI_ID0		BIT(12)
25 #define IMR_VC0_SAI_ID3		BIT(11)
26 #define IMR_VC0_SAI_ID2		BIT(10)
27 #define IMR_VC0_SAI_ID1		BIT(9)
28 #define IMR_VC0_SAI_ID0		BIT(8)
29 #define IMR_CPU_0		BIT(1)		/* SMM mode */
30 #define IMR_CPU			BIT(0)		/* Non SMM mode */
31 #define IMR_ACCESS_NONE		0
32 
33 /*
34  * Read/Write access-all bits here include some reserved bits
35  * These are the values firmware uses and are accepted by hardware.
36  * The kernel defines read/write access-all in the same way as firmware
37  * in order to have a consistent and crisp definition across firmware,
38  * bootloader and kernel.
39  */
40 #define IMR_READ_ACCESS_ALL	0xBFFFFFFF
41 #define IMR_WRITE_ACCESS_ALL	0xFFFFFFFF
42 
43 /* Number of IMRs provided by Quark X1000 SoC */
44 #define QUARK_X1000_IMR_MAX	0x08
45 #define QUARK_X1000_IMR_REGBASE 0x40
46 
47 /* IMR alignment bits - only bits 31:10 are checked for IMR validity */
48 #define IMR_ALIGN		0x400
49 #define IMR_MASK		(IMR_ALIGN - 1)
50 
51 int imr_add_range(phys_addr_t base, size_t size,
52 		  unsigned int rmask, unsigned int wmask);
53 
54 int imr_remove_range(phys_addr_t base, size_t size);
55 
56 #endif /* _IMR_H */
57