xref: /openbmc/linux/arch/x86/hyperv/hv_init.c (revision 25b892b5)
1 // SPDX-License-Identifier: GPL-2.0-only
2 /*
3  * X86 specific Hyper-V initialization code.
4  *
5  * Copyright (C) 2016, Microsoft, Inc.
6  *
7  * Author : K. Y. Srinivasan <kys@microsoft.com>
8  */
9 
10 #include <linux/efi.h>
11 #include <linux/types.h>
12 #include <linux/bitfield.h>
13 #include <linux/io.h>
14 #include <asm/apic.h>
15 #include <asm/desc.h>
16 #include <asm/hypervisor.h>
17 #include <asm/hyperv-tlfs.h>
18 #include <asm/mshyperv.h>
19 #include <asm/idtentry.h>
20 #include <linux/kexec.h>
21 #include <linux/version.h>
22 #include <linux/vmalloc.h>
23 #include <linux/mm.h>
24 #include <linux/hyperv.h>
25 #include <linux/slab.h>
26 #include <linux/kernel.h>
27 #include <linux/cpuhotplug.h>
28 #include <linux/syscore_ops.h>
29 #include <clocksource/hyperv_timer.h>
30 #include <linux/highmem.h>
31 
32 int hyperv_init_cpuhp;
33 u64 hv_current_partition_id = ~0ull;
34 EXPORT_SYMBOL_GPL(hv_current_partition_id);
35 
36 void *hv_hypercall_pg;
37 EXPORT_SYMBOL_GPL(hv_hypercall_pg);
38 
39 /* Storage to save the hypercall page temporarily for hibernation */
40 static void *hv_hypercall_pg_saved;
41 
42 struct hv_vp_assist_page **hv_vp_assist_page;
43 EXPORT_SYMBOL_GPL(hv_vp_assist_page);
44 
45 static int hv_cpu_init(unsigned int cpu)
46 {
47 	union hv_vp_assist_msr_contents msr = { 0 };
48 	struct hv_vp_assist_page **hvp = &hv_vp_assist_page[smp_processor_id()];
49 	int ret;
50 
51 	ret = hv_common_cpu_init(cpu);
52 	if (ret)
53 		return ret;
54 
55 	if (!hv_vp_assist_page)
56 		return 0;
57 
58 	if (!*hvp) {
59 		if (hv_root_partition) {
60 			/*
61 			 * For root partition we get the hypervisor provided VP assist
62 			 * page, instead of allocating a new page.
63 			 */
64 			rdmsrl(HV_X64_MSR_VP_ASSIST_PAGE, msr.as_uint64);
65 			*hvp = memremap(msr.pfn <<
66 					HV_X64_MSR_VP_ASSIST_PAGE_ADDRESS_SHIFT,
67 					PAGE_SIZE, MEMREMAP_WB);
68 		} else {
69 			/*
70 			 * The VP assist page is an "overlay" page (see Hyper-V TLFS's
71 			 * Section 5.2.1 "GPA Overlay Pages"). Here it must be zeroed
72 			 * out to make sure we always write the EOI MSR in
73 			 * hv_apic_eoi_write() *after* the EOI optimization is disabled
74 			 * in hv_cpu_die(), otherwise a CPU may not be stopped in the
75 			 * case of CPU offlining and the VM will hang.
76 			 */
77 			*hvp = __vmalloc(PAGE_SIZE, GFP_KERNEL | __GFP_ZERO);
78 			if (*hvp)
79 				msr.pfn = vmalloc_to_pfn(*hvp);
80 		}
81 		WARN_ON(!(*hvp));
82 		if (*hvp) {
83 			msr.enable = 1;
84 			wrmsrl(HV_X64_MSR_VP_ASSIST_PAGE, msr.as_uint64);
85 		}
86 	}
87 
88 	return 0;
89 }
90 
91 static void (*hv_reenlightenment_cb)(void);
92 
93 static void hv_reenlightenment_notify(struct work_struct *dummy)
94 {
95 	struct hv_tsc_emulation_status emu_status;
96 
97 	rdmsrl(HV_X64_MSR_TSC_EMULATION_STATUS, *(u64 *)&emu_status);
98 
99 	/* Don't issue the callback if TSC accesses are not emulated */
100 	if (hv_reenlightenment_cb && emu_status.inprogress)
101 		hv_reenlightenment_cb();
102 }
103 static DECLARE_DELAYED_WORK(hv_reenlightenment_work, hv_reenlightenment_notify);
104 
105 void hyperv_stop_tsc_emulation(void)
106 {
107 	u64 freq;
108 	struct hv_tsc_emulation_status emu_status;
109 
110 	rdmsrl(HV_X64_MSR_TSC_EMULATION_STATUS, *(u64 *)&emu_status);
111 	emu_status.inprogress = 0;
112 	wrmsrl(HV_X64_MSR_TSC_EMULATION_STATUS, *(u64 *)&emu_status);
113 
114 	rdmsrl(HV_X64_MSR_TSC_FREQUENCY, freq);
115 	tsc_khz = div64_u64(freq, 1000);
116 }
117 EXPORT_SYMBOL_GPL(hyperv_stop_tsc_emulation);
118 
119 static inline bool hv_reenlightenment_available(void)
120 {
121 	/*
122 	 * Check for required features and privileges to make TSC frequency
123 	 * change notifications work.
124 	 */
125 	return ms_hyperv.features & HV_ACCESS_FREQUENCY_MSRS &&
126 		ms_hyperv.misc_features & HV_FEATURE_FREQUENCY_MSRS_AVAILABLE &&
127 		ms_hyperv.features & HV_ACCESS_REENLIGHTENMENT;
128 }
129 
130 DEFINE_IDTENTRY_SYSVEC(sysvec_hyperv_reenlightenment)
131 {
132 	ack_APIC_irq();
133 	inc_irq_stat(irq_hv_reenlightenment_count);
134 	schedule_delayed_work(&hv_reenlightenment_work, HZ/10);
135 }
136 
137 void set_hv_tscchange_cb(void (*cb)(void))
138 {
139 	struct hv_reenlightenment_control re_ctrl = {
140 		.vector = HYPERV_REENLIGHTENMENT_VECTOR,
141 		.enabled = 1,
142 		.target_vp = hv_vp_index[smp_processor_id()]
143 	};
144 	struct hv_tsc_emulation_control emu_ctrl = {.enabled = 1};
145 
146 	if (!hv_reenlightenment_available()) {
147 		pr_warn("Hyper-V: reenlightenment support is unavailable\n");
148 		return;
149 	}
150 
151 	hv_reenlightenment_cb = cb;
152 
153 	/* Make sure callback is registered before we write to MSRs */
154 	wmb();
155 
156 	wrmsrl(HV_X64_MSR_REENLIGHTENMENT_CONTROL, *((u64 *)&re_ctrl));
157 	wrmsrl(HV_X64_MSR_TSC_EMULATION_CONTROL, *((u64 *)&emu_ctrl));
158 }
159 EXPORT_SYMBOL_GPL(set_hv_tscchange_cb);
160 
161 void clear_hv_tscchange_cb(void)
162 {
163 	struct hv_reenlightenment_control re_ctrl;
164 
165 	if (!hv_reenlightenment_available())
166 		return;
167 
168 	rdmsrl(HV_X64_MSR_REENLIGHTENMENT_CONTROL, *(u64 *)&re_ctrl);
169 	re_ctrl.enabled = 0;
170 	wrmsrl(HV_X64_MSR_REENLIGHTENMENT_CONTROL, *(u64 *)&re_ctrl);
171 
172 	hv_reenlightenment_cb = NULL;
173 }
174 EXPORT_SYMBOL_GPL(clear_hv_tscchange_cb);
175 
176 static int hv_cpu_die(unsigned int cpu)
177 {
178 	struct hv_reenlightenment_control re_ctrl;
179 	unsigned int new_cpu;
180 
181 	hv_common_cpu_die(cpu);
182 
183 	if (hv_vp_assist_page && hv_vp_assist_page[cpu]) {
184 		union hv_vp_assist_msr_contents msr = { 0 };
185 		if (hv_root_partition) {
186 			/*
187 			 * For root partition the VP assist page is mapped to
188 			 * hypervisor provided page, and thus we unmap the
189 			 * page here and nullify it, so that in future we have
190 			 * correct page address mapped in hv_cpu_init.
191 			 */
192 			memunmap(hv_vp_assist_page[cpu]);
193 			hv_vp_assist_page[cpu] = NULL;
194 			rdmsrl(HV_X64_MSR_VP_ASSIST_PAGE, msr.as_uint64);
195 			msr.enable = 0;
196 		}
197 		wrmsrl(HV_X64_MSR_VP_ASSIST_PAGE, msr.as_uint64);
198 	}
199 
200 	if (hv_reenlightenment_cb == NULL)
201 		return 0;
202 
203 	rdmsrl(HV_X64_MSR_REENLIGHTENMENT_CONTROL, *((u64 *)&re_ctrl));
204 	if (re_ctrl.target_vp == hv_vp_index[cpu]) {
205 		/*
206 		 * Reassign reenlightenment notifications to some other online
207 		 * CPU or just disable the feature if there are no online CPUs
208 		 * left (happens on hibernation).
209 		 */
210 		new_cpu = cpumask_any_but(cpu_online_mask, cpu);
211 
212 		if (new_cpu < nr_cpu_ids)
213 			re_ctrl.target_vp = hv_vp_index[new_cpu];
214 		else
215 			re_ctrl.enabled = 0;
216 
217 		wrmsrl(HV_X64_MSR_REENLIGHTENMENT_CONTROL, *((u64 *)&re_ctrl));
218 	}
219 
220 	return 0;
221 }
222 
223 static int __init hv_pci_init(void)
224 {
225 	int gen2vm = efi_enabled(EFI_BOOT);
226 
227 	/*
228 	 * For Generation-2 VM, we exit from pci_arch_init() by returning 0.
229 	 * The purpose is to suppress the harmless warning:
230 	 * "PCI: Fatal: No config space access function found"
231 	 */
232 	if (gen2vm)
233 		return 0;
234 
235 	/* For Generation-1 VM, we'll proceed in pci_arch_init().  */
236 	return 1;
237 }
238 
239 static int hv_suspend(void)
240 {
241 	union hv_x64_msr_hypercall_contents hypercall_msr;
242 	int ret;
243 
244 	if (hv_root_partition)
245 		return -EPERM;
246 
247 	/*
248 	 * Reset the hypercall page as it is going to be invalidated
249 	 * across hibernation. Setting hv_hypercall_pg to NULL ensures
250 	 * that any subsequent hypercall operation fails safely instead of
251 	 * crashing due to an access of an invalid page. The hypercall page
252 	 * pointer is restored on resume.
253 	 */
254 	hv_hypercall_pg_saved = hv_hypercall_pg;
255 	hv_hypercall_pg = NULL;
256 
257 	/* Disable the hypercall page in the hypervisor */
258 	rdmsrl(HV_X64_MSR_HYPERCALL, hypercall_msr.as_uint64);
259 	hypercall_msr.enable = 0;
260 	wrmsrl(HV_X64_MSR_HYPERCALL, hypercall_msr.as_uint64);
261 
262 	ret = hv_cpu_die(0);
263 	return ret;
264 }
265 
266 static void hv_resume(void)
267 {
268 	union hv_x64_msr_hypercall_contents hypercall_msr;
269 	int ret;
270 
271 	ret = hv_cpu_init(0);
272 	WARN_ON(ret);
273 
274 	/* Re-enable the hypercall page */
275 	rdmsrl(HV_X64_MSR_HYPERCALL, hypercall_msr.as_uint64);
276 	hypercall_msr.enable = 1;
277 	hypercall_msr.guest_physical_address =
278 		vmalloc_to_pfn(hv_hypercall_pg_saved);
279 	wrmsrl(HV_X64_MSR_HYPERCALL, hypercall_msr.as_uint64);
280 
281 	hv_hypercall_pg = hv_hypercall_pg_saved;
282 	hv_hypercall_pg_saved = NULL;
283 
284 	/*
285 	 * Reenlightenment notifications are disabled by hv_cpu_die(0),
286 	 * reenable them here if hv_reenlightenment_cb was previously set.
287 	 */
288 	if (hv_reenlightenment_cb)
289 		set_hv_tscchange_cb(hv_reenlightenment_cb);
290 }
291 
292 /* Note: when the ops are called, only CPU0 is online and IRQs are disabled. */
293 static struct syscore_ops hv_syscore_ops = {
294 	.suspend	= hv_suspend,
295 	.resume		= hv_resume,
296 };
297 
298 static void (* __initdata old_setup_percpu_clockev)(void);
299 
300 static void __init hv_stimer_setup_percpu_clockev(void)
301 {
302 	/*
303 	 * Ignore any errors in setting up stimer clockevents
304 	 * as we can run with the LAPIC timer as a fallback.
305 	 */
306 	(void)hv_stimer_alloc(false);
307 
308 	/*
309 	 * Still register the LAPIC timer, because the direct-mode STIMER is
310 	 * not supported by old versions of Hyper-V. This also allows users
311 	 * to switch to LAPIC timer via /sys, if they want to.
312 	 */
313 	if (old_setup_percpu_clockev)
314 		old_setup_percpu_clockev();
315 }
316 
317 static void __init hv_get_partition_id(void)
318 {
319 	struct hv_get_partition_id *output_page;
320 	u64 status;
321 	unsigned long flags;
322 
323 	local_irq_save(flags);
324 	output_page = *this_cpu_ptr(hyperv_pcpu_output_arg);
325 	status = hv_do_hypercall(HVCALL_GET_PARTITION_ID, NULL, output_page);
326 	if (!hv_result_success(status)) {
327 		/* No point in proceeding if this failed */
328 		pr_err("Failed to get partition ID: %lld\n", status);
329 		BUG();
330 	}
331 	hv_current_partition_id = output_page->partition_id;
332 	local_irq_restore(flags);
333 }
334 
335 /*
336  * This function is to be invoked early in the boot sequence after the
337  * hypervisor has been detected.
338  *
339  * 1. Setup the hypercall page.
340  * 2. Register Hyper-V specific clocksource.
341  * 3. Setup Hyper-V specific APIC entry points.
342  */
343 void __init hyperv_init(void)
344 {
345 	u64 guest_id, required_msrs;
346 	union hv_x64_msr_hypercall_contents hypercall_msr;
347 	int cpuhp;
348 
349 	if (x86_hyper_type != X86_HYPER_MS_HYPERV)
350 		return;
351 
352 	/* Absolutely required MSRs */
353 	required_msrs = HV_MSR_HYPERCALL_AVAILABLE |
354 		HV_MSR_VP_INDEX_AVAILABLE;
355 
356 	if ((ms_hyperv.features & required_msrs) != required_msrs)
357 		return;
358 
359 	if (hv_common_init())
360 		return;
361 
362 	hv_vp_assist_page = kcalloc(num_possible_cpus(),
363 				    sizeof(*hv_vp_assist_page), GFP_KERNEL);
364 	if (!hv_vp_assist_page) {
365 		ms_hyperv.hints &= ~HV_X64_ENLIGHTENED_VMCS_RECOMMENDED;
366 		goto common_free;
367 	}
368 
369 	cpuhp = cpuhp_setup_state(CPUHP_AP_ONLINE_DYN, "x86/hyperv_init:online",
370 				  hv_cpu_init, hv_cpu_die);
371 	if (cpuhp < 0)
372 		goto free_vp_assist_page;
373 
374 	/*
375 	 * Setup the hypercall page and enable hypercalls.
376 	 * 1. Register the guest ID
377 	 * 2. Enable the hypercall and register the hypercall page
378 	 */
379 	guest_id = generate_guest_id(0, LINUX_VERSION_CODE, 0);
380 	wrmsrl(HV_X64_MSR_GUEST_OS_ID, guest_id);
381 
382 	hv_hypercall_pg = __vmalloc_node_range(PAGE_SIZE, 1, VMALLOC_START,
383 			VMALLOC_END, GFP_KERNEL, PAGE_KERNEL_ROX,
384 			VM_FLUSH_RESET_PERMS, NUMA_NO_NODE,
385 			__builtin_return_address(0));
386 	if (hv_hypercall_pg == NULL) {
387 		wrmsrl(HV_X64_MSR_GUEST_OS_ID, 0);
388 		goto remove_cpuhp_state;
389 	}
390 
391 	rdmsrl(HV_X64_MSR_HYPERCALL, hypercall_msr.as_uint64);
392 	hypercall_msr.enable = 1;
393 
394 	if (hv_root_partition) {
395 		struct page *pg;
396 		void *src, *dst;
397 
398 		/*
399 		 * For the root partition, the hypervisor will set up its
400 		 * hypercall page. The hypervisor guarantees it will not show
401 		 * up in the root's address space. The root can't change the
402 		 * location of the hypercall page.
403 		 *
404 		 * Order is important here. We must enable the hypercall page
405 		 * so it is populated with code, then copy the code to an
406 		 * executable page.
407 		 */
408 		wrmsrl(HV_X64_MSR_HYPERCALL, hypercall_msr.as_uint64);
409 
410 		pg = vmalloc_to_page(hv_hypercall_pg);
411 		dst = kmap(pg);
412 		src = memremap(hypercall_msr.guest_physical_address << PAGE_SHIFT, PAGE_SIZE,
413 				MEMREMAP_WB);
414 		BUG_ON(!(src && dst));
415 		memcpy(dst, src, HV_HYP_PAGE_SIZE);
416 		memunmap(src);
417 		kunmap(pg);
418 	} else {
419 		hypercall_msr.guest_physical_address = vmalloc_to_pfn(hv_hypercall_pg);
420 		wrmsrl(HV_X64_MSR_HYPERCALL, hypercall_msr.as_uint64);
421 	}
422 
423 	/*
424 	 * hyperv_init() is called before LAPIC is initialized: see
425 	 * apic_intr_mode_init() -> x86_platform.apic_post_init() and
426 	 * apic_bsp_setup() -> setup_local_APIC(). The direct-mode STIMER
427 	 * depends on LAPIC, so hv_stimer_alloc() should be called from
428 	 * x86_init.timers.setup_percpu_clockev.
429 	 */
430 	old_setup_percpu_clockev = x86_init.timers.setup_percpu_clockev;
431 	x86_init.timers.setup_percpu_clockev = hv_stimer_setup_percpu_clockev;
432 
433 	hv_apic_init();
434 
435 	x86_init.pci.arch_init = hv_pci_init;
436 
437 	register_syscore_ops(&hv_syscore_ops);
438 
439 	hyperv_init_cpuhp = cpuhp;
440 
441 	if (cpuid_ebx(HYPERV_CPUID_FEATURES) & HV_ACCESS_PARTITION_ID)
442 		hv_get_partition_id();
443 
444 	BUG_ON(hv_root_partition && hv_current_partition_id == ~0ull);
445 
446 #ifdef CONFIG_PCI_MSI
447 	/*
448 	 * If we're running as root, we want to create our own PCI MSI domain.
449 	 * We can't set this in hv_pci_init because that would be too late.
450 	 */
451 	if (hv_root_partition)
452 		x86_init.irqs.create_pci_msi_domain = hv_create_pci_msi_domain;
453 #endif
454 
455 	/* Query the VMs extended capability once, so that it can be cached. */
456 	hv_query_ext_cap(0);
457 	return;
458 
459 remove_cpuhp_state:
460 	cpuhp_remove_state(cpuhp);
461 free_vp_assist_page:
462 	kfree(hv_vp_assist_page);
463 	hv_vp_assist_page = NULL;
464 common_free:
465 	hv_common_free();
466 }
467 
468 /*
469  * This routine is called before kexec/kdump, it does the required cleanup.
470  */
471 void hyperv_cleanup(void)
472 {
473 	union hv_x64_msr_hypercall_contents hypercall_msr;
474 
475 	unregister_syscore_ops(&hv_syscore_ops);
476 
477 	/* Reset our OS id */
478 	wrmsrl(HV_X64_MSR_GUEST_OS_ID, 0);
479 
480 	/*
481 	 * Reset hypercall page reference before reset the page,
482 	 * let hypercall operations fail safely rather than
483 	 * panic the kernel for using invalid hypercall page
484 	 */
485 	hv_hypercall_pg = NULL;
486 
487 	/* Reset the hypercall page */
488 	hypercall_msr.as_uint64 = 0;
489 	wrmsrl(HV_X64_MSR_HYPERCALL, hypercall_msr.as_uint64);
490 
491 	/* Reset the TSC page */
492 	hypercall_msr.as_uint64 = 0;
493 	wrmsrl(HV_X64_MSR_REFERENCE_TSC, hypercall_msr.as_uint64);
494 }
495 
496 void hyperv_report_panic(struct pt_regs *regs, long err, bool in_die)
497 {
498 	static bool panic_reported;
499 	u64 guest_id;
500 
501 	if (in_die && !panic_on_oops)
502 		return;
503 
504 	/*
505 	 * We prefer to report panic on 'die' chain as we have proper
506 	 * registers to report, but if we miss it (e.g. on BUG()) we need
507 	 * to report it on 'panic'.
508 	 */
509 	if (panic_reported)
510 		return;
511 	panic_reported = true;
512 
513 	rdmsrl(HV_X64_MSR_GUEST_OS_ID, guest_id);
514 
515 	wrmsrl(HV_X64_MSR_CRASH_P0, err);
516 	wrmsrl(HV_X64_MSR_CRASH_P1, guest_id);
517 	wrmsrl(HV_X64_MSR_CRASH_P2, regs->ip);
518 	wrmsrl(HV_X64_MSR_CRASH_P3, regs->ax);
519 	wrmsrl(HV_X64_MSR_CRASH_P4, regs->sp);
520 
521 	/*
522 	 * Let Hyper-V know there is crash data available
523 	 */
524 	wrmsrl(HV_X64_MSR_CRASH_CTL, HV_CRASH_CTL_CRASH_NOTIFY);
525 }
526 EXPORT_SYMBOL_GPL(hyperv_report_panic);
527 
528 bool hv_is_hyperv_initialized(void)
529 {
530 	union hv_x64_msr_hypercall_contents hypercall_msr;
531 
532 	/*
533 	 * Ensure that we're really on Hyper-V, and not a KVM or Xen
534 	 * emulation of Hyper-V
535 	 */
536 	if (x86_hyper_type != X86_HYPER_MS_HYPERV)
537 		return false;
538 
539 	/*
540 	 * Verify that earlier initialization succeeded by checking
541 	 * that the hypercall page is setup
542 	 */
543 	hypercall_msr.as_uint64 = 0;
544 	rdmsrl(HV_X64_MSR_HYPERCALL, hypercall_msr.as_uint64);
545 
546 	return hypercall_msr.enable;
547 }
548 EXPORT_SYMBOL_GPL(hv_is_hyperv_initialized);
549 
550 enum hv_isolation_type hv_get_isolation_type(void)
551 {
552 	if (!(ms_hyperv.priv_high & HV_ISOLATION))
553 		return HV_ISOLATION_TYPE_NONE;
554 	return FIELD_GET(HV_ISOLATION_TYPE, ms_hyperv.isolation_config_b);
555 }
556 EXPORT_SYMBOL_GPL(hv_get_isolation_type);
557 
558 bool hv_is_isolation_supported(void)
559 {
560 	return hv_get_isolation_type() != HV_ISOLATION_TYPE_NONE;
561 }
562